[Bug 42129] Re: Dapper Beta Hangs at startups if pcmcia cards are present

[sam tygier]

dmesg

[4294667.296000] Linux version 2.6.15-19-386 (buildd at rothera) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Mon Mar 20 16:46:02 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000001dff0000 (usable)
[4294667.296000]  BIOS-e820: 000000001dff0000 - 000000001dff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000001dff3000 - 000000001e000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 479MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 122864
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:0
[4294667.296000]   DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000]   Normal zone: 118768 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 VT9174                                ) @ 0x000f6570
[4294667.296000] ACPI: RSDT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3000
[4294667.296000] ACPI: FADT (v001 VT9174 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x1dff3040
[4294667.296000] ACPI: DSDT (v001 VT9174 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] Allocating PCI resources starting at 20000000 (gap: 1e000000:e1ff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash
[4294667.296000] No local APIC present or hardware disabled
[4294667.296000] mapped APIC to ffffd000 (013c2000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 2048 (order: 11, 32768 bytes)
[4294667.296000] Detected 600.143 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.700000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.704000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.819000] Memory: 476508k/491456k available (1971k kernel code, 14404k reserved, 599k data, 288k init, 0k highmem)
[4294670.819000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294670.879000] Calibrating delay using timer specific routine.. 1200.73 BogoMIPS (lpj=600365)
[4294670.879000] Security Framework v1.0.0 initialized
[4294670.879000] SELinux:  Disabled at boot.
[4294670.879000] Mount-cache hash table entries: 512
[4294670.879000] CPU: After generic identify, caps: 00803035 80803035 00000000 00000000 00000000 00000000 00000000
[4294670.879000] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[4294670.879000] CPU: L2 Cache: 64K (32 bytes/line)
[4294670.879000] CPU: After all inits, caps: 00803135 80803035 00000000 00000000 00000000 00000000 00000000
[4294670.879000] mtrr: v2.0 (20020519)
[4294670.879000] CPU: Centaur VIA Samuel 2 stepping 03
[4294670.879000] Checking 'hlt' instruction... OK.
[4294670.883000] checking if image is initramfs... it is
[4294674.244000] Freeing initrd memory: 6376k freed
[4294674.312000] ACPI: Looking for DSDT ... not found!
[4294674.322000] ACPI: setting ELCR to 0200 (from 1220)
[4294674.371000] NET: Registered protocol family 16
[4294674.371000] EISA bus registered
[4294674.371000] ACPI: bus type pci registered
[4294674.381000] PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=3
[4294674.381000] PCI: Using configuration type 1
[4294674.383000] ACPI: Subsystem revision 20051216
[4294674.404000] ACPI: Interpreter enabled
[4294674.404000] ACPI: Using PIC for interrupt routing
[4294674.406000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294674.406000] PCI: Probing PCI hardware (bus 00)
[4294674.416000] PCI quirk: region 0400-047f claimed by vt8235 PM
[4294674.416000] PCI quirk: region 0500-050f claimed by vt8235 SMB
[4294674.417000] Boot video device is 0000:01:00.0
[4294674.417000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294674.543000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 4 5 6 7 *12)
[4294674.545000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 4 *5 6 7 12)
[4294674.547000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 4 5 6 7 12) *9
[4294674.549000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 4 5 6 7 *12)
[4294674.562000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294674.562000] pnp: PnP ACPI init
[4294674.564000] pnp: PnPACPI: unknown resource type 7
[4294674.564000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c01
[4294674.564000] pnp: PnPACPI: unknown resource type 7
[4294674.564000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294674.565000] pnp: PnPACPI: unknown resource type 7
[4294674.565000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294674.565000] pnp: PnPACPI: unknown resource type 7
[4294674.565000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0200
[4294674.565000] pnp: PnPACPI: unknown resource type 7
[4294674.566000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0b00
[4294674.566000] pnp: PnPACPI: unknown resource type 7
[4294674.566000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0800
[4294674.566000] pnp: PnPACPI: unknown resource type 7
[4294674.566000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c04
[4294674.567000] pnp: PnPACPI: unknown resource type 7
[4294674.567000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0700
[4294674.569000] pnp: PnPACPI: unknown resource type 7
[4294674.569000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294674.571000] pnp: PnPACPI: unknown resource type 7
[4294674.571000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0501
[4294674.574000] pnp: PnPACPI: unknown resource type 7
[4294674.574000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0400
[4294674.576000] pnp: PnPACPI: unknown resource type 7
[4294674.576000] pnp: PnPACPI: METHOD_NAME__CRS failure for PNP0c02
[4294674.577000] pnp: PnP ACPI: found 0 devices
[4294674.577000] PnPBIOS: Disabled by ACPI PNP
[4294674.577000] PCI: Using ACPI for IRQ routing
[4294674.577000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[4294674.632000] PCI: Bridge: 0000:00:01.0
[4294674.632000]   IO window: disabled.
[4294674.632000]   MEM window: dc000000-ddffffff
[4294674.633000]   PREFETCH window: d8000000-dbffffff
[4294674.633000] PCI: Bus 2, cardbus bridge: 0000:00:0a.0
[4294674.633000]   IO window: 00001000-000010ff
[4294674.633000]   IO window: 00001400-000014ff
[4294674.633000]   PREFETCH window: 20000000-21ffffff
[4294674.633000]   MEM window: 22000000-23ffffff
[4294674.633000] PCI: Bus 6, cardbus bridge: 0000:00:0a.1
[4294674.633000]   IO window: 00001800-000018ff
[4294674.633000]   IO window: 00001c00-00001cff
[4294674.633000]   PREFETCH window: 24000000-25ffffff
[4294674.633000]   MEM window: 26000000-27ffffff
[4294674.633000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294674.633000] **** SET: Misaligned resource pointer: ddf446e2 Type 07 Len 0
[4294674.635000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 12
[4294674.635000] PCI: setting IRQ 12 as level-triggered
[4294674.635000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
[4294674.636000] **** SET: Misaligned resource pointer: ddf446e2 Type 07 Len 0
[4294674.637000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[4294674.637000] PCI: setting IRQ 5 as level-triggered
[4294674.637000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294674.639000] audit: initializing netlink socket (disabled)
[4294674.639000] audit(1146340523.637:1): initialized
[4294674.640000] VFS: Disk quotas dquot_6.5.1
[4294674.640000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294674.640000] Initializing Cryptographic API
[4294674.640000] io scheduler noop registered
[4294674.640000] io scheduler anticipatory registered
[4294674.640000] io scheduler deadline registered
[4294674.640000] io scheduler cfq registered
[4294674.641000] isapnp: Scanning for PnP cards...
[4294674.998000] isapnp: No Plug & Play device found
[4294675.055000] PNP: No PS/2 controller found. Probing ports directly.
[4294675.055000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294675.056000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294675.056000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294675.056000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294675.056000] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294675.064000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294675.064000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294675.064000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294675.064000] ACPI: bus type ide registered
[4294675.065000] mice: PS/2 mouse device common for all mice
[4294675.065000] EISA: Probing bus 0 at eisa.0
[4294675.065000] Cannot allocate resource for EISA slot 1
[4294675.065000] EISA: Detected 0 cards.
[4294675.066000] NET: Registered protocol family 2
[4294675.076000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[4294675.076000] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
[4294675.077000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294675.078000] TCP: Hash tables configured (established 16384 bind 16384)
[4294675.078000] TCP reno registered
[4294675.078000] TCP bic registered
[4294675.078000] NET: Registered protocol family 1
[4294675.078000] NET: Registered protocol family 8
[4294675.078000] NET: Registered protocol family 20
[4294675.078000] Using IPI Shortcut mode
[4294675.079000] ACPI wakeup devices:
[4294675.079000] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 MC97 UAR1
[4294675.079000] ACPI: (supports S0 S1 S3 S4 S5)
[4294675.079000] Freeing unused kernel memory: 288k freed
[4294675.503000] vga16fb: initializing
[4294675.503000] vga16fb: mapped to 0xc00a0000
[4294675.634000] Console: switching to colour frame buffer device 80x25
[4294675.634000] fb0: VGA16 VGA frame buffer device
[4294676.828000] Capability LSM initialized
[4294677.036000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294677.036000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294679.429000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294679.429000] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
[4294679.429000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 12
[4294679.429000] VP_IDE: chipset revision 6
[4294679.429000] VP_IDE: not 100% native mode: will probe irqs later
[4294679.429000] VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
[4294679.430000]     ide0: BM-DMA at 0xc000-0xc007, BIOS settings: hda:DMA, hdb:pio
[4294679.430000]     ide1: BM-DMA at 0xc008-0xc00f, BIOS settings: hdc:DMA, hdd:pio
[4294679.430000] Probing IDE interface ide0...
[4294679.816000] hda: SAMSUNG SP1213N, ATA DISK drive
[4294680.428000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294680.428000] Probing IDE interface ide1...
[4294681.222000] hdc: SAMSUNG CD-ROM SN-124, ATAPI CD/DVD-ROM drive
[4294681.834000] ide1 at 0x170-0x177,0x376 on irq 15
[4294681.866000] hda: max request size: 1024KiB
[4294681.908000] hda: 234493056 sectors (120060 MB) w/8192KiB Cache, CHS=16383/255/63, UDMA(100)
[4294681.908000] hda: cache flushes supported
[4294681.909000]  hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
[4294681.995000] hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
[4294681.995000] Uniform CD-ROM driver Revision: 3.20
[4294682.626000] usbcore: registered new driver usbfs
[4294682.628000] usbcore: registered new driver hub
[4294682.636000] USB Universal Host Controller Interface driver v2.3
[4294682.638000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
[4294682.638000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294682.643000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294682.643000] uhci_hcd 0000:00:10.0: irq 12, io base 0x0000b400
[4294682.651000] hub 1-0:1.0: USB hub found
[4294682.651000] hub 1-0:1.0: 2 ports detected
[4294682.753000] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294682.753000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294682.753000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294682.753000] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000b800
[4294682.755000] hub 2-0:1.0: USB hub found
[4294682.755000] hub 2-0:1.0: 2 ports detected
[4294682.856000] **** SET: Misaligned resource pointer: ddc4df02 Type 07 Len 0
[4294682.858000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
[4294682.858000] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 5 (level, low) -> IRQ 5
[4294682.859000] PCI: Via IRQ fixup for 0000:00:10.2, from 9 to 5
[4294682.859000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294682.859000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294682.859000] uhci_hcd 0000:00:10.2: irq 5, io base 0x0000bc00
[4294682.861000] hub 3-0:1.0: USB hub found
[4294682.861000] hub 3-0:1.0: 2 ports detected
[4294682.959000] usb 1-1: new full speed USB device using uhci_hcd and address 2
[4294682.969000] **** SET: Misaligned resource pointer: ddc4dc02 Type 07 Len 0
[4294682.971000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 12
[4294682.971000] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 12 (level, low) -> IRQ 12
[4294682.971000] ehci_hcd 0000:00:10.3: EHCI Host Controller
[4294682.972000] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294682.973000] ehci_hcd 0000:00:10.3: irq 12, io mem 0xde00b000
[4294682.973000] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294682.974000] hub 4-0:1.0: USB hub found
[4294682.974000] hub 4-0:1.0: 6 ports detected
[4294683.566000] kjournald starting.  Commit interval 5 seconds
[4294683.566000] EXT3-fs: mounted filesystem with ordered data mode.
[4294683.742000] usb 4-1: new high speed USB device using ehci_hcd and address 2
[4294683.858000] hub 4-1:1.0: USB hub found
[4294683.858000] hub 4-1:1.0: 4 ports detected
[4294684.293000] usb 4-1.2: new low speed USB device using ehci_hcd and address 4
[4294684.594000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[4294700.690000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
[4294700.690000] Yenta: CardBus bridge found at 0000:00:0a.0 [1106:aa01]
[4294700.707000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294700.793000] ieee1394: Initialized config rom entry `ip1394'
[4294700.815000] Linux agpgart interface v0.101 (c) Dave Jones
[4294700.817000] Yenta: ISA IRQ mask 0x0c00, PCI irq 12
[4294700.817000] Socket status: 30000410
[4294700.830000] agpgart: Detected VIA CLE266 chipset
[4294700.841000] agpgart: AGP aperture is 128M @ 0xd0000000
[4294700.881000] ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294700.881000] Yenta: CardBus bridge found at 0000:00:0a.1 [1106:aa01]
[4294701.003000] Yenta: ISA IRQ mask 0x0c00, PCI irq 5
[4294701.003000] Socket status: 30000006
[4294701.008000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294701.056000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[4294701.056000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
[4294701.808000] pccard: PCMCIA card inserted into slot 0
[4294702.990000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[5]  MMIO=[de00a000-de00a7ff]  Max Packet=[2048]
[4294703.049000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294703.050000] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 12 (level, low) -> IRQ 12
[4294703.054000] eth0: VIA Rhine II at 0x1c800, 00:40:63:d5:18:29, IRQ 12.
[4294703.055000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link c1e1.
[4294703.743000] cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7
[4294703.745000] cs: IO port probe 0xc00-0xcf7: clean.
[4294703.746000] cs: IO port probe 0xa00-0xaff: clean.
[4294704.568000] usbcore: registered new driver hiddev
[4294704.574000] input: CHESEN USB Keyboard as /class/input/input0
[4294704.574000] input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:10.3-1.2
[4294704.584000] input: CHESEN USB Keyboard as /class/input/input1
[4294704.585000] input: USB HID v1.10 Mouse [CHESEN USB Keyboard] on usb-0000:00:10.3-1.2[4294704.585000] usbcore: registered new driver usbhid
[4294704.585000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294705.403000] cs: IO port probe 0x100-0x4ff: excluding 0x378-0x37f 0x4d0-0x4d7
[4294705.405000] cs: IO port probe 0xc00-0xcf7: clean.
[4294705.406000] cs: IO port probe 0xa00-0xaff: clean.
[4294705.408000] cs: memory probe 0xa0000000-0xa0ffffff:<7>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[004063500000f676]
[4294705.448000] irda_init()
[4294705.448000] NET: Registered protocol family 23
[4294705.667000]  clean.
[4294705.667000] pcmcia: registering new device pcmcia0.0
[4294707.939000] ts: Compaq touchscreen protocol output
[4294709.157000] airo:  Probing for PCI adapters
[4294709.159000] airo:  Finished probing for PCI adapters
[4294709.272000] eth0: link up, 100Mbps, full-duplex, lpa 0xC1E1
[4294710.396000] airo: cmd= 111
[4294710.396000] airo: status= 7f11
[4294710.396000] airo: Rsp0= 2
[4294710.396000] airo: Rsp1= 0
[4294710.396000] airo: Rsp2= 0
[4294710.396000] airo: Doing fast bap_reads
[4294710.592000] airo: MAC enabled eth1 0:40:96:55:d:37
[4294710.592000] eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 10, io 0x0100-0x013f
[4294710.937000] Setting key 0
[4294711.298000] usbcore: registered new driver snd-usb-audio
[4294712.842000] NET: Registered protocol family 17
[4294714.648000] NET: Registered protocol family 10
[4294714.648000] lo: Disabled Privacy Extensions
[4294714.650000] IPv6 over IPv4 tunneling driver
[4294725.160000] eth0: no IPv6 routers present
[4294725.160000] eth1: no IPv6 routers present
[4294854.292000] pccard: card ejected from slot 0
[4294854.292000] airo: cmd= 2
[4294854.292000] airo: status= ffff
[4294854.292000] airo: Rsp0= ffff
[4294854.292000] airo: Rsp1= ffff
[4294854.292000] airo: Rsp2= ffff
[4294854.292000] airo: cmd= 21
[4294854.292000] airo: status= ffff
[4294854.292000] airo: Rsp0= ffff
[4294854.292000] airo: Rsp1= ffff
[4294854.292000] airo: Rsp2= ffff
[4294854.298000] airo: cmd= 21
[4294854.298000] airo: status= ffff
[4294854.298000] airo: Rsp0= ffff
[4294854.298000] airo: Rsp1= ffff
[4294854.298000] airo: Rsp2= ffff
[4294854.308000] airo: cmd= 21
[4294854.308000] airo: status= ffff
[4294854.308000] airo: Rsp0= ffff
[4294854.308000] airo: Rsp1= ffff
[4294854.308000] airo: Rsp2= ffff
[4294855.684000] parport0: PC-style at 0x378 [PCSPP,TRISTATE,EPP]
[4294855.770000] lp0: using parport0 (polling).
[4294856.205000] SCSI subsystem initialized
[4294856.226000] sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
[4294856.226000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[4294856.226000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294856.570000] Adding 979924k swap on /dev/hda1.  Priority:-1 extents:1 across:979924k
[4294856.799000] EXT3 FS on hda6, internal journal
[4294857.469000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294857.469000] md: bitmap version 4.39
[4294858.758000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com[4294858.810000] pccard: PCMCIA card inserted into slot 0
[4294858.810000] pcmcia: registering new device pcmcia0.0
[4294859.977000] airo: cmd= 111
[4294859.977000] airo: status= 7f11
[4294859.977000] airo: Rsp0= 2
[4294859.977000] airo: Rsp1= 0
[4294859.977000] airo: Rsp2= 0
[4294859.977000] airo: Doing fast bap_reads
[4294859.999000] airo: MAC enabled eth1 0:40:96:55:d:37
[4294860.000000] eth1: index 0x05: Vcc 5.0, Vpp 5.0, irq 10, io 0x0100-0x013f
[4294860.464000] cdrom: open failed.
[4294860.609000] Setting key 0
[4294861.970000] kjournald starting.  Commit interval 5 seconds
[4294861.970000] EXT3 FS on hda5, internal journal
[4294861.970000] EXT3-fs: mounted filesystem with ordered data mode.
[4294866.787000] ACPI: Power Button (FF) [PWRF]
[4294866.787000] ACPI: Power Button (CM) [PWRB]
[4294867.462000] ibm_acpi: ec object not found
[4294872.294000] eth1: no IPv6 routers present
[4294876.967000] spurious 8259A interrupt: IRQ7.
[4294892.935000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294892.936000] apm: overridden by ACPI.
[4294896.739000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294896.739000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294896.739000] ide: failed opcode was: 0xec
[4294897.100000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294897.100000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294897.100000] ide: failed opcode was: 0xec
[4294901.158000] Bluetooth: Core ver 2.8
[4294901.158000] NET: Registered protocol family 31
[4294901.158000] Bluetooth: HCI device and connection manager initialized
[4294901.158000] Bluetooth: HCI socket layer initialized
[4294901.218000] Bluetooth: L2CAP ver 2.8
[4294901.218000] Bluetooth: L2CAP socket layer initialized
[4294901.231000] Bluetooth: RFCOMM socket layer initialized
[4294901.231000] Bluetooth: RFCOMM TTY layer initialized
[4294901.231000] Bluetooth: RFCOMM ver 1.7

========

note:
[4294714.650000] IPv6 over IPv4 tunneling driver
[4294725.160000] eth0: no IPv6 routers present
[4294725.160000] eth1: no IPv6 routers present
[4294854.292000] pccard: card ejected from slot 0

when i ejected the card it carried on booting.

-- 
Dapper Beta Hangs at startups if pcmcia cards are present 
https://launchpad.net/bugs/42129