[Bug 42079] Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed
wink saville
wink at saville.com
Sat Apr 29 15:17:36 UTC 2006
Public bug reported:
Affects: linux-source-2.6.15 (Ubuntu)
Severity: Normal
Priority: (none set)
Status: Unconfirmed
Description:
I was booting using 2.6.15-21 and at the "Loading Hardware Drivers"
message the system hung. I waited about 2 minutes and then rebooted.
This time successfully execpt my mouse, a usb logitech MX500, isn't
working.
If a boot fails, what is the best method of capturing the messages?
Here is the output of dmesg of the boot that succeeded except for the
mouse:
wink at hpz5:~$ cat dmesg.060429-0800.log
[ 0.000000] Bootdata ok (command line is root=/dev/hda4 ro quiet splash)
[ 0.000000] Linux version 2.6.15-21-amd64-generic (buildd at crested) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu5)) #1 SMP PREEMPT Fri Apr 21 16:42:20 UTC 2006
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000d0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000004ff70000 (usable)
[ 0.000000] BIOS-e820: 000000004ff70000 - 000000004ff7f000 (ACPI data)
[ 0.000000] BIOS-e820: 000000004ff7f000 - 000000004ff80000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000004ff80000 - 0000000050000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] ACPI: RSDP (v000 PTLTD ) @ 0x00000000000f7240
[ 0.000000] ACPI: RSDT (v001 PTLTD RSDT 0x06040000 LTP 0x00000000) @ 0x000000004ff7a87e
[ 0.000000] ACPI: FADT (v001 NVIDIA CK8 0x06040000 PTL_ 0x000f4240) @ 0x000000004ff7ee13
[ 0.000000] ACPI: MADT (v001 NVIDIA NV_APIC_ 0x06040000 LTP 0x00000000) @ 0x000000004ff7ee87
[ 0.000000] ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x06040000 LTP 0x00000001) @ 0x000000004ff7eee1
[ 0.000000] ACPI: SSDT (v001 PTLTD POWERNOW 0x06040000 LTP 0x00000001) @ 0x000000004ff7ef09
[ 0.000000] ACPI: DSDT (v001 NVIDIA CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] Number of nodes 1
[ 0.000000] Node 0 MemBase 0000000000000000 Limit 000000004ff70000
[ 0.000000] Using 63 for the hash shift.
[ 0.000000] Using node hash shift of 63
[ 0.000000] Bootmem setup node 0 0000000000000000-000000004ff70000
[ 0.000000] No mptable found.
[ 0.000000] On node 0 totalpages: 322040
[ 0.000000] DMA zone: 3022 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 319018 pages, LIFO batch:31
[ 0.000000] Normal zone: 0 pages, LIFO batch:0
[ 0.000000] HighMem zone: 0 pages, LIFO batch:0
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] ACPI: PM-Timer IO Port: 0x8008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 16
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Setting APIC routing to physical flat
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 60000000 (gap: 50000000:aff80000)
[ 0.000000] Checking aperture...
[ 0.000000] CPU 0: aperture @ e8000000 size 128 MB
[ 0.000000] SMP: Allowing 3 CPUs, 2 hotplug CPUs
[ 0.000000] Built 1 zonelists
[ 0.000000] Kernel command line: root=/dev/hda4 ro quiet splash
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 131072 bytes)
[ 0.000000] time.c: Using 3.579545 MHz PM timer.
[ 0.000000] time.c: Detected 797.954 MHz processor.
[ 18.665794] Console: colour VGA+ 80x25
[ 18.668329] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 18.672252] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 18.698361] Memory: 1277896k/1310144k available (2131k kernel code, 31860k reserved, 751k data, 180k init)
[ 18.758143] Calibrating delay using timer specific routine.. 1597.28 BogoMIPS (lpj=798642)
[ 18.758254] Security Framework v1.0.0 initialized
[ 18.758268] SELinux: Disabled at boot.
[ 18.758313] Mount-cache hash table entries: 256
[ 18.758518] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.758525] CPU: L2 Cache: 1024K (64 bytes/line)
[ 18.758531] CPU 0(1) -> Node 0 -> Core 0
[ 18.758546] mtrr: v2.0 (20020519)
[ 18.758561] SMP alternatives: switching to UP code
[ 18.759094] checking if image is initramfs... it is
[ 20.107470] Freeing initrd memory: 6877k freed
[ 20.116454] ACPI: Looking for DSDT ... not found!
[ 20.151418] Using local APIC timer interrupts.
[ 20.276718] Detected 12.468 MHz APIC timer.
[ 20.276811] Brought up 1 CPUs
[ 20.276849] time.c: Using PIT/TSC based timekeeping.
[ 20.276854] testing NMI watchdog ... OK.
[ 20.287399] NET: Registered protocol family 16
[ 20.287442] ACPI: bus type pci registered
[ 20.287453] PCI: Using configuration type 1
[ 20.288417] ACPI: Subsystem revision 20051216
[ 20.291852] ACPI: Interpreter enabled
[ 20.291857] ACPI: Using IOAPIC for interrupt routing
[ 20.292633] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 20.292640] PCI: Probing PCI hardware (bus 00)
[ 20.320946] Boot video device is 0000:01:00.0
[ 20.321030] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 20.357294] ACPI: Embedded Controller [EC0] (gpe 33) interrupt mode.
[ 20.404342] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
[ 20.404908] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP0._PRT]
[ 20.406343] ACPI: PCI Interrupt Link [LNK1] (IRQs 16 18 19) *0
[ 20.407133] ACPI: PCI Interrupt Link [LNK2] (IRQs 16 18 19) *0
[ 20.407911] ACPI: PCI Interrupt Link [LNK3] (IRQs 17) *0
[ 20.408687] ACPI: PCI Interrupt Link [LNK4] (IRQs 16 18 19) *0, disabled.
[ 20.409464] ACPI: PCI Interrupt Link [LNK5] (IRQs 16 18 19) *0
[ 20.410231] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22) *0
[ 20.411002] ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *0
[ 20.411779] ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0
[ 20.412542] ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *0
[ 20.413307] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22) *0, disabled.
[ 20.414074] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22) *0
[ 20.414846] ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22) *0
[ 20.415611] ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22) *0, disabled.
[ 20.416393] ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *0, disabled.
[ 20.416645] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 20.416661] pnp: PnP ACPI init
[ 20.444262] pnp: PnP ACPI: found 12 devices
[ 20.444288] PCI: Using ACPI for IRQ routing
[ 20.444295] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 20.444448] agpgart: Detected AGP bridge 0
[ 20.444460] agpgart: Setting up Nforce3 AGP.
[ 20.451904] agpgart: AGP aperture is 128M @ 0xe8000000
[ 20.451934] PCI-DMA: Disabling IOMMU.
[ 20.452918] pnp: 00:00: ioport range 0x8000-0x807f could not be reserved
[ 20.452927] pnp: 00:00: ioport range 0x8080-0x80ff has been reserved
[ 20.452934] pnp: 00:00: ioport range 0x8400-0x847f has been reserved
[ 20.452942] pnp: 00:00: ioport range 0x8480-0x84ff could not be reserved
[ 20.452949] pnp: 00:00: ioport range 0x8800-0x887f has been reserved
[ 20.452956] pnp: 00:00: ioport range 0x8880-0x88ff has been reserved
[ 20.452963] pnp: 00:00: ioport range 0x2040-0x207f has been reserved
[ 20.452970] pnp: 00:00: ioport range 0x2000-0x203f has been reserved
[ 20.453356] PCI: Failed to allocate mem resource #10:2000000 at e2000000 for 0000:02:04.0
[ 20.453415] PCI: Failed to allocate mem resource #10:2000000 at e2000000 for 0000:02:04.1
[ 20.453469] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 20.453475] IO window: 00003000-000030ff
[ 20.453488] IO window: 00003400-000034ff
[ 20.453496] PREFETCH window: 60000000-61ffffff
[ 20.453503] PCI: Bus 7, cardbus bridge: 0000:02:04.1
[ 20.453508] IO window: 00003800-000038ff
[ 20.453514] IO window: 00003c00-00003cff
[ 20.453522] PREFETCH window: 62000000-63ffffff
[ 20.453528] PCI: Bridge: 0000:00:0a.0
[ 20.453534] IO window: 3000-7fff
[ 20.453541] MEM window: e0100000-e17fffff
[ 20.453548] PREFETCH window: 60000000-63ffffff
[ 20.453556] PCI: Bridge: 0000:00:0b.0
[ 20.453560] IO window: disabled.
[ 20.453568] MEM window: e2000000-e2ffffff
[ 20.453576] PREFETCH window: f0000000-f80fffff
[ 20.453591] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 20.454219] ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 19
[ 20.454229] GSI 16 sharing vector 0xB1 and IRQ 16
[ 20.454237] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177
[ 20.454844] ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 18
[ 20.454851] GSI 17 sharing vector 0xB9 and IRQ 17
[ 20.454858] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185
[ 20.455088] Simple Boot Flag at 0x37 set to 0x1
[ 20.455352] IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $
[ 20.455954] audit: initializing netlink socket (disabled)
[ 20.455974] audit(1146322095.791:1): initialized
[ 20.456213] VFS: Disk quotas dquot_6.5.1
[ 20.456245] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 20.456335] Initializing Cryptographic API
[ 20.456343] io scheduler noop registered
[ 20.456359] io scheduler anticipatory registered
[ 20.456372] io scheduler deadline registered
[ 20.456402] io scheduler cfq registered
[ 20.485214] Linux agpgart interface v0.101 (c) Dave Jones
[ 20.485383] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 20.492413] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 20.498670] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 20.499366] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 20.500343] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 20.501218] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 20.502243] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.502251] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[ 20.506708] ACPI: PCI Interrupt Link [LMCI] enabled at IRQ 22
[ 20.506718] GSI 18 sharing vector 0xC1 and IRQ 18
[ 20.506727] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LMCI] -> GSI 22 (level, low) -> IRQ 193
[ 20.506742] ACPI: PCI interrupt for device 0000:00:06.1 disabled
[ 20.507486] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 20.507572] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 20.507579] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 20.507810] mice: PS/2 mouse device common for all mice
[ 20.507959] NET: Registered protocol family 2
[ 20.520678] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 20.521566] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[ 20.528648] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 20.529816] TCP: Hash tables configured (established 262144 bind 65536)
[ 20.529823] TCP reno registered
[ 20.529993] TCP bic registered
[ 20.530008] NET: Registered protocol family 1
[ 20.530020] NET: Registered protocol family 8
[ 20.530025] NET: Registered protocol family 20
[ 20.530264] ACPI wakeup devices:
[ 20.530269] USB0 USB1 USB2 PS2K PS2M MAC0
[ 20.530277] ACPI: (supports S0 S3 S4 S5)
[ 20.530395] Freeing unused kernel memory: 180k freed
[ 20.572803] input: AT Translated Set 2 keyboard as /class/input/input0
[ 20.642381] vga16fb: initializing
[ 20.642390] vga16fb: mapped to 0xffff8100000a0000
[ 20.825446] Console: switching to colour frame buffer device 80x25
[ 20.825457] fb0: VGA16 VGA frame buffer device
[ 22.009210] Capability LSM initialized
[ 22.068621] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 22.080648] ACPI: Thermal Zone [THRM] (29 C)
[ 23.058173] SCSI subsystem initialized
[ 23.061176] libata version 1.20 loaded.
[ 23.067278] NFORCE3-150: IDE controller at PCI slot 0000:00:08.0
[ 23.067309] NFORCE3-150: chipset revision 165
[ 23.067313] NFORCE3-150: not 100% native mode: will probe irqs later
[ 23.067322] NFORCE3-150: BIOS didn't set cable bits correctly. Enabling workaround.
[ 23.067331] NFORCE3-150: 0000:00:08.0 (rev a5) UDMA133 controller
[ 23.067347] ide0: BM-DMA at 0x2080-0x2087, BIOS settings: hda:DMA, hdb:pio
[ 23.067365] ide1: BM-DMA at 0x2088-0x208f, BIOS settings: hdc:DMA, hdd:pio
[ 23.067380] Probing IDE interface ide0...
[ 23.330464] hda: TOSHIBA MK8025GAS, ATA DISK drive
[ 23.942260] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 23.992423] Probing IDE interface ide1...
[ 24.663944] hdc: HL-DT-ST DVD-RW GWA-4080N, ATAPI CD/DVD-ROM drive
[ 24.971112] ide1 at 0x170-0x177,0x376 on irq 15
[ 24.988018] hda: max request size: 128KiB
[ 25.001427] hda: 156301488 sectors (80026 MB), CHS=65535/16/63, UDMA(100)
[ 25.001499] hda: cache flushes supported
[ 25.001777] hda: hda1 hda2 hda3 hda4
[ 25.093301] hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, DMA
[ 25.093317] Uniform CD-ROM driver Revision: 3.20
[ 25.626050] usbcore: registered new driver usbfs
[ 25.626625] usbcore: registered new driver hub
[ 25.629429] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
[ 25.630040] PCI: Enabling device 0000:00:02.0 (0004 -> 0006)
[ 25.630159] ACPI: PCI Interrupt 0000:00:02.0[P]: no GSI - using IRQ 11
[ 25.630717] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 25.630728] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 25.873789] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
[ 25.873815] ohci_hcd 0000:00:02.0: irq 11, io mem 0xe0000000
[ 25.928062] hub 1-0:1.0: USB hub found
[ 25.928097] hub 1-0:1.0: 3 ports detected
[ 26.029349] PCI: Enabling device 0000:00:02.1 (0004 -> 0006)
[ 26.031346] ACPI: PCI Interrupt Link [LUS1] enabled at IRQ 21
[ 26.031364] GSI 19 sharing vector 0xC9 and IRQ 19
[ 26.031378] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS1] -> GSI 21 (level, low) -> IRQ 201
[ 26.031746] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 26.031760] ohci_hcd 0000:00:02.1: OHCI Host Controller
[ 26.245492] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
[ 26.245534] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe0001000
[ 26.299974] hub 2-0:1.0: USB hub found
[ 26.300003] hub 2-0:1.0: 3 ports detected
[ 26.410878] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 20
[ 26.410898] GSI 20 sharing vector 0xD1 and IRQ 20
[ 26.410913] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [LUS2] -> GSI 20 (level, low) -> IRQ 209
[ 26.411444] PCI: Setting latency timer of device 0000:00:02.2 to 64
[ 26.411458] ehci_hcd 0000:00:02.2: EHCI Host Controller
[ 26.411576] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[ 26.412723] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
[ 26.412765] ehci_hcd 0000:00:02.2: irq 209, io mem 0xe0004000
[ 26.412792] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 26.414355] hub 3-0:1.0: USB hub found
[ 26.414384] hub 3-0:1.0: 6 ports detected
[ 26.424432] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 26.606193] irq 11: nobody cared (try booting with the "irqpoll" option)
[ 26.606203]
[ 26.606205] Call Trace: <IRQ> <ffffffff80166035>{__report_bad_irq+53} <ffffffff801662aa>{note_interrupt+538}
[ 26.606236] <ffffffff880b23ca>{:usbcore:usb_hcd_irq+42} <ffffffff80165997>{__do_IRQ+215}
[ 26.606291] <ffffffff8011300f>{do_IRQ+47} <ffffffff80110480>{ret_from_intr+0}
[ 26.606311] <EOI>
[ 26.606326] handlers:
[ 26.606331] [<ffffffff880b23a0>] (usb_hcd_irq+0x0/0x60 [usbcore])
[ 26.606363] Disabling IRQ #11
[ 26.809289] EXT3-fs: mounted filesystem with ordered data mode.
[ 26.810339] kjournald starting. Commit interval 5 seconds
[ 26.888005] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 42.540701] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 42.731432] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 42.839498] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x2040
[ 42.839568] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x2000
[ 43.106584] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 22
[ 43.106595] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LACI] -> GSI 22 (level, low) -> IRQ 193
[ 43.106941] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 43.330597] input: PS/2 Mouse as /class/input/input1
[ 43.355892] input: AlpsPS/2 ALPS GlidePoint as /class/input/input2
[ 43.668654] intel8x0_measure_ac97_clock: measured 50318 usecs
[ 43.668663] intel8x0: clocking to 48000
[ 44.109213] nvidia: module license 'NVIDIA' taints kernel.
[ 44.123261] ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 16
[ 44.123274] GSI 21 sharing vector 0xD9 and IRQ 21
[ 44.123283] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 16 (level, low) -> IRQ 217
[ 44.123595] NVRM: loading NVIDIA Linux x86_64 Kernel Module 1.0-8756 Wed Mar 29 15:12:41 PST 2006
[ 44.173745] ieee1394: Initialized config rom entry `ip1394'
[ 44.176963] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[ 44.176990] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177
[ 44.227327] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[177] MMIO=[e0108000-e01087ff] Max Packet=[2048]
[ 44.234587] 8139too Fast Ethernet driver 0.9.27
[ 44.234662] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185
[ 44.235508] eth0: RealTek RTL8139 at 0xffffc20000070800, 00:0f:b0:4a:07:a9, IRQ 185
[ 44.235517] eth0: Identified 8139 chip type 'RTL-8101'
[ 44.244953] ieee80211_crypt: registered algorithm 'NULL'
[ 44.247338] ieee80211: 802.11 data/management/control stack, git-1.1.7
[ 44.247344] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno at linux.intel.com>
[ 44.267937] ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNK1] -> GSI 19 (level, low) -> IRQ 177
[ 44.267962] Yenta: CardBus bridge found at 0000:02:04.0 [103c:006d]
[ 44.267988] PCI: Bus 3, cardbus bridge: 0000:02:04.0
[ 44.267994] IO window: 00003000-000030ff
[ 44.268000] IO window: 00003400-000034ff
[ 44.268008] PREFETCH window: 60000000-61ffffff
[ 44.268016] MEM window: e0400000-e07fffff
[ 44.268025] Yenta: Enabling burst memory read transactions
[ 44.268032] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 44.268037] Yenta: Routing CardBus interrupts to PCI
[ 44.268045] Yenta TI: socket 0000:02:04.0, mfunc 0x01111d22, devctl 0x64
[ 44.273041] input: PC Speaker as /class/input/input3
[ 44.298902] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[ 44.372327] bcm43xx: driver
[ 44.373147] ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 17
[ 44.373158] GSI 22 sharing vector 0xE1 and IRQ 22
[ 44.373167] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNK3] -> GSI 17 (level, low) -> IRQ 225
[ 44.500105] Yenta: ISA IRQ mask 0x04f8, PCI irq 177
[ 44.500113] Socket status: 30000086
[ 44.500119] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 44.500127] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff
[ 44.500135] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[ 44.500349] ACPI: PCI Interrupt 0000:02:04.1[B] -> Link [LNK2] -> GSI 18 (level, low) -> IRQ 185
[ 44.500373] Yenta: CardBus bridge found at 0000:02:04.1 [103c:006d]
[ 44.500395] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 44.500400] Yenta: Routing CardBus interrupts to PCI
[ 44.500408] Yenta TI: socket 0000:02:04.1, mfunc 0x01111d22, devctl 0x64
[ 44.724082] Yenta: ISA IRQ mask 0x04f8, PCI irq 185
[ 44.724091] Socket status: 30000006
[ 44.724099] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x7fff
[ 44.724107] pcmcia: parent PCI bridge Memory window: 0xe0100000 - 0xe17fffff
[ 44.724114] pcmcia: parent PCI bridge Memory window: 0x60000000 - 0x63ffffff
[ 44.917590] parport: PnPBIOS parport detected.
[ 44.917627] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 44.943485] Real Time Clock Driver v1.12
[ 45.223843] ts: Compaq touchscreen protocol output
[ 45.494673] ieee1394: Host added: ID:BUS[0-00:1023] GUID[523f0200523f0200]
[ 46.189178] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
[ 47.282630] NET: Registered protocol family 17
[ 48.272729] floppy0: no floppy controllers found
[ 48.850692] Adding 506036k swap on /dev/hda3. Priority:-1 extents:1 across:506036k
[ 49.063409] EXT3 FS on hda4, internal journal
[ 49.316538] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[ 49.316546] md: bitmap version 4.39
[ 50.026095] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[ 50.838881] cdrom: open failed.
[ 51.279190] NTFS driver 2.1.25 [Flags: R/O MODULE].
[ 51.627613] NTFS volume version 3.1.
[ 51.974460] NET: Registered protocol family 10
[ 51.974710] lo: Disabled Privacy Extensions
[ 51.975025] IPv6 over IPv4 tunneling driver
[ 54.875522] ACPI: AC Adapter [ACAD] (on-line)
[ 55.007064] ACPI: Battery Slot [BAT1] (battery present)
[ 55.152095] ACPI: Power Button (FF) [PWRF]
[ 55.152114] ACPI: Power Button (CM) [PWRB]
[ 55.152125] ACPI: Lid Switch [LID]
[ 55.338489] ibm_acpi: ec object not found
[ 55.374951] pcc_acpi: loading...
[ 55.532236] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 56.183975] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[ 56.185337] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
[ 56.185345] powernow-k8: 1 : fid 0x8 (1600 MHz), vid 0xa (1300 mV)
[ 56.185352] powernow-k8: 2 : fid 0x0 (800 MHz), vid 0x12 (1100 mV)
[ 56.185362] cpu_init done, current fid 0x0, vid 0x12
[ 70.849265] eth0: no IPv6 routers present
[ 82.184892] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 82.184911] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 82.184918] ide: failed opcode was: 0xec
[ 82.303306] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[ 82.303326] hdc: drive_cmd: error=0x04 { AbortedCommand }
[ 82.303333] ide: failed opcode was: 0xec
[ 83.102533] Bluetooth: Core ver 2.8
[ 83.102546] NET: Registered protocol family 31
[ 83.102551] Bluetooth: HCI device and connection manager initialized
[ 83.102576] Bluetooth: HCI socket layer initialized
[ 83.266883] Bluetooth: L2CAP ver 2.8
[ 83.266894] Bluetooth: L2CAP socket layer initialized
--
Boot of Linux version 2.6.15-21-amd64-generic on hpzv5000 failed
https://launchpad.net/bugs/42079
More information about the kernel-bugs
mailing list