[Bug 26703] Re: ACX Drivers -- needs updating.

[Mike Homer]

Same issue here too 

lspci
0000:02:09.0 Network controller: Texas Instruments ACX 111 54Mbps Wireless


dmesg output

[4294911.880000] acx: Loaded combined PCI/USB driver, firmware_ver=default
[4294911.881000] acx: compiled to use 32bit I/O access. I/O timing issues might occur, such as non-working firmware upload. Report them
[4294911.892000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC2] -> GSI 17 (l evel, low) -> IRQ 201
[4294911.892000] acx: found ACX111-based wireless network card at 0000:02:09.0, irq:201, phymem1:0xE0024000, phymem2:0xE0000000, mem1:0xf9040000, mem1_size:8192 , mem2:0xfa7c0000, mem2_size:131072
[4294912.629000] acx: firmware 'Rev 2.3.1.31' does not work well with this drive r
[4294912.629000] acx: form factor 0x01 ((mini-)PCI / CardBus), radio type 0x16 ( Radia), EEPROM version 0x05, uploaded firmware 'Rev 2.3.1.31' (0x03010101)
[4294912.630000] acx v0.3.21: net device wlan0, driver compiled against wireless  extensions 19 and Linux 2.6.15-20-k7
[4294912.630000] usbcore: registered new driver acx_usb
[4294912.817000] ADDRCONF(NETDEV_UP): wlan0: link is not ready

-- 
ACX Drivers -- needs updating.
https://launchpad.net/malone/bugs/26703