[Bug 36089] Re: After Kernel update (3/21/2006) no sound
jacrider
andrew.callum at rogers.com
Wed Apr 12 11:14:36 UTC 2006
andrew at DapperBox:~$ dmesg
[4294667.296000] Linux version 2.6.15-20-386 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 PREEMPT Tue Apr 4 17:48:51 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
[4294667.296000] BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
[4294667.296000] BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[4294667.296000] BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[4294667.296000] 127MB HIGHMEM available.
[4294667.296000] 896MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000ff780
[4294667.296000] On node 0 totalpages: 262064
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 225280 pages, LIFO batch:31
[4294667.296000] HighMem zone: 32688 pages, LIFO batch:7
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 ACPIAM ) @ 0x000f8350
[4294667.296000] ACPI: RSDT (v001 A M I OEMRSDT 0x09000513 MSFT 0x00000097) @ 0x3ffb0000
[4294667.296000] ACPI: FADT (v002 A M I OEMFACP 0x09000513 MSFT 0x00000097) @ 0x3ffb0200
[4294667.296000] ACPI: MADT (v001 A M I OEMAPIC 0x09000513 MSFT 0x00000097) @ 0x3ffb0390
[4294667.296000] ACPI: OEMB (v001 A M I AMI_OEM 0x09000513 MSFT 0x00000097) @ 0x3ffc0040
[4294667.296000] ACPI: DSDT (v001 A0385 A0385000 0x00000000 INTL 0x02002026) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x808
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 20
[4294667.296000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[4294667.296000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 1, version 3, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/sda1 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2935.160 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.393000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294667.394000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294667.424000] Memory: 1028816k/1048256k available (1973k kernel code, 18708k reserved, 601k data, 288k init, 130752k highmem)
[4294667.424000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.484000] Calibrating delay using timer specific routine.. 5872.45 BogoMIPS (lpj=2936225)
[4294667.484000] Security Framework v1.0.0 initialized
[4294667.484000] SELinux: Disabled at boot.
[4294667.484000] Mount-cache hash table entries: 512
[4294667.484000] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294667.484000] CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000
[4294667.484000] monitor/mwait feature present.
[4294667.484000] using mwait in idle threads.
[4294667.484000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294667.484000] CPU: L2 cache: 256K
[4294667.484000] CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 0000441d 00000000 00000000
[4294667.484000] mtrr: v2.0 (20020519)
[4294667.484000] CPU: Intel(R) Celeron(R) CPU 2.93GHz stepping 01
[4294667.484000] Enabling fast FPU save and restore... done.
[4294667.484000] Enabling unmasked SIMD FPU exception support... done.
[4294667.484000] Checking 'hlt' instruction... OK.
[4294667.488000] checking if image is initramfs... it is
[4294668.012000] Freeing initrd memory: 6388k freed
[4294668.024000] ACPI: Looking for DSDT ... not found!
[4294668.027000] ENABLING IO-APIC IRQs
[4294668.027000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294668.138000] NET: Registered protocol family 16
[4294668.138000] EISA bus registered
[4294668.138000] ACPI: bus type pci registered
[4294668.138000] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=1
[4294668.138000] PCI: Using configuration type 1
[4294668.139000] ACPI: Subsystem revision 20051216
[4294668.143000] ACPI: Interpreter enabled
[4294668.143000] ACPI: Using IOAPIC for interrupt routing
[4294668.144000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294668.144000] PCI: Probing PCI hardware (bus 00)
[4294668.148000] Boot video device is 0000:01:00.0
[4294668.148000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294668.162000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[4294668.169000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[4294668.169000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294668.169000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294668.170000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294668.170000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294668.170000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294668.171000] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294668.171000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294668.171000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294668.171000] pnp: PnP ACPI init
[4294668.176000] pnp: PnP ACPI: found 12 devices
[4294668.176000] PnPBIOS: Disabled by ACPI PNP
[4294668.176000] PCI: Using ACPI for IRQ routing
[4294668.176000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294668.184000] PCI: Bridge: 0000:00:01.0
[4294668.184000] IO window: disabled.
[4294668.184000] MEM window: fca00000-feafffff
[4294668.184000] PREFETCH window: d7f00000-f7efffff
[4294668.184000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294668.185000] audit: initializing netlink socket (disabled)
[4294668.185000] audit(1144499060.184:1): initialized
[4294668.185000] highmem bounce pool size: 64 pages
[4294668.185000] VFS: Disk quotas dquot_6.5.1
[4294668.185000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294668.185000] Initializing Cryptographic API
[4294668.185000] io scheduler noop registered
[4294668.185000] io scheduler anticipatory registered
[4294668.185000] io scheduler deadline registered
[4294668.185000] io scheduler cfq registered
[4294668.185000] PCI: Bypassing VIA 8237 APIC De-Assert Message
[4294668.185000] isapnp: Scanning for PnP cards...
[4294668.542000] isapnp: No Plug & Play device found
[4294668.569000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[4294668.569000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294668.569000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294668.569000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294668.569000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.574000] 00:0a: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294668.574000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294668.574000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294668.574000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294668.574000] ACPI: bus type ide registered
[4294668.575000] mice: PS/2 mouse device common for all mice
[4294668.575000] EISA: Probing bus 0 at eisa.0
[4294668.575000] EISA: Detected 0 cards.
[4294668.575000] NET: Registered protocol family 2
[4294668.585000] IP route cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.585000] TCP established hash table entries: 262144 (order: 8, 1048576 bytes)
[4294668.587000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294668.587000] TCP: Hash tables configured (established 262144 bind 65536)
[4294668.587000] TCP reno registered
[4294668.587000] TCP bic registered
[4294668.587000] NET: Registered protocol family 1
[4294668.587000] NET: Registered protocol family 8
[4294668.587000] NET: Registered protocol family 20
[4294668.587000] Using IPI Shortcut mode
[4294668.588000] ACPI wakeup devices:
[4294668.588000] PCI0 PS2K PS2M UAR1 MC97 USB1 USB2 USB3 USB4 EHCI ILAN
[4294668.588000] ACPI: (supports S0 S1 S3 S4 S5)
[4294668.588000] Freeing unused kernel memory: 288k freed
[4294668.608000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294668.660000] vga16fb: initializing
[4294668.660000] vga16fb: mapped to 0xc00a0000
[4294668.792000] Console: switching to colour frame buffer device 80x25
[4294668.792000] fb0: VGA16 VGA frame buffer device
[4294669.814000] Capability LSM initialized
[4294670.773000] SCSI subsystem initialized
[4294670.775000] libata version 1.20 loaded.
[4294670.777000] sata_via 0000:00:0f.0: version 1.1
[4294670.777000] ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 169
[4294670.777000] PCI: Via IRQ fixup for 0000:00:0f.0, from 11 to 9
[4294670.777000] sata_via 0000:00:0f.0: routed to hard irq line 9
[4294670.777000] ata1: SATA max UDMA/133 cmd 0xEC00 ctl 0xE882 bmdma 0xE400 irq 169
[4294670.777000] ata2: SATA max UDMA/133 cmd 0xE800 ctl 0xE482 bmdma 0xE408 irq 169
[4294671.132000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4003 85:7c69 86:3e01 87:4003 88:407f
[4294671.132000] ata1: dev 0 ATA-7, max UDMA/133, 490234752 sectors: LBA48
[4294671.132000] ata1: dev 0 configured for UDMA/133
[4294671.132000] scsi0 : sata_via
[4294671.333000] ata2: no device found (phy stat 00000000)
[4294671.333000] scsi1 : sata_via
[4294671.333000] Vendor: ATA Model: Maxtor 7Y250M0 Rev: YAR5
[4294671.333000] Type: Direct-Access ANSI SCSI revision: 05
[4294671.343000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[4294671.343000] SCSI device sda: drive cache: write back
[4294671.347000] SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
[4294671.347000] SCSI device sda: drive cache: write back
[4294671.347000] sda: sda1 sda2 < sda5 sda6 sda7 >
[4294671.388000] sd 0:0:0:0: Attached scsi disk sda
[4294671.694000] VP_IDE: IDE controller at PCI slot 0000:00:0f.1
[4294671.694000] ACPI: PCI Interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 169
[4294671.694000] PCI: Via IRQ fixup for 0000:00:0f.1, from 255 to 9
[4294671.694000] VP_IDE: chipset revision 6
[4294671.694000] VP_IDE: not 100% native mode: will probe irqs later
[4294671.694000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
[4294671.694000] ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
[4294671.694000] ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
[4294671.694000] Probing IDE interface ide0...
[4294672.488000] hda: SAMSUNG DVD-ROM SD-816B, ATAPI CD/DVD-ROM drive
[4294672.794000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.794000] Probing IDE interface ide1...
[4294673.323000] hda: ATAPI 48X DVD-ROM drive, 512kB Cache, UDMA(33)
[4294673.323000] Uniform CD-ROM driver Revision: 3.20
[4294673.413000] usbcore: registered new driver usbfs
[4294673.413000] usbcore: registered new driver hub
[4294673.416000] USB Universal Host Controller Interface driver v2.3
[4294673.417000] ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 177
[4294673.417000] PCI: Via IRQ fixup for 0000:00:10.0, from 10 to 1
[4294673.417000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294673.418000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294673.418000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000cc00
[4294673.420000] hub 1-0:1.0: USB hub found
[4294673.420000] hub 1-0:1.0: 2 ports detected
[4294673.521000] ACPI: PCI Interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 177
[4294673.521000] PCI: Via IRQ fixup for 0000:00:10.1, from 10 to 1
[4294673.521000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294673.521000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294673.521000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000d000
[4294673.521000] hub 2-0:1.0: USB hub found
[4294673.521000] hub 2-0:1.0: 2 ports detected
[4294673.622000] ACPI: PCI Interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 177
[4294673.622000] PCI: Via IRQ fixup for 0000:00:10.2, from 11 to 1
[4294673.622000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294673.622000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294673.622000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000d080
[4294673.622000] hub 3-0:1.0: USB hub found
[4294673.622000] hub 3-0:1.0: 2 ports detected
[4294673.723000] ACPI: PCI Interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 177
[4294673.723000] PCI: Via IRQ fixup for 0000:00:10.3, from 11 to 1
[4294673.723000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[4294673.723000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294673.723000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000dc00
[4294673.723000] hub 4-0:1.0: USB hub found
[4294673.723000] hub 4-0:1.0: 2 ports detected
[4294673.828000] ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 177
[4294673.828000] PCI: Via IRQ fixup for 0000:00:10.4, from 5 to 1
[4294673.828000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[4294673.828000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[4294673.828000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xfebff800
[4294673.828000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294673.829000] hub 5-0:1.0: USB hub found
[4294673.829000] hub 5-0:1.0: 8 ports detected
[4294673.951000] Probing IDE interface ide1...
[4294674.510000] Attempting manual resume
[4294674.545000] EXT3-fs: mounted filesystem with ordered data mode.
[4294674.553000] kjournald starting. Commit interval 5 seconds
[4294681.634000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294683.223000] Linux agpgart interface v0.101 (c) Dave Jones
[4294683.225000] agpgart: Detected VIA P4M800CE chipset
[4294683.230000] agpgart: AGP aperture is 64M @ 0xf8000000
[4294684.009000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294684.029000] ieee1394: Initialized config rom entry `ip1394'
[4294684.031000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[4294684.031000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> GSI 18 (level, low) -> IRQ 185
[4294684.031000] PCI: Via IRQ fixup for 0000:00:0a.0, from 5 to 9
[4294684.085000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[185] MMIO=[febff000-febff7ff] Max Packet=[2048]
[4294684.093000] input: PC Speaker as /class/input/input1
[4294684.164000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294684.190000] Real Time Clock Driver v1.12
[4294684.282000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294684.282000] Please try dxs_support=5 option
[4294684.282000] and report if it works on your machine.
[4294684.282000] For more details, read ALSA-Configuration.txt.
[4294684.282000] ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 193
[4294684.282000] PCI: Via IRQ fixup for 0000:00:11.5, from 5 to 1
[4294684.282000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294684.400000] via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
[4294684.410000] parport: PnPBIOS parport detected.
[4294684.410000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294684.597000] nvidia: module license 'NVIDIA' taints kernel.
[4294684.619000] FDC 0 is a post-1991 82077
[4294684.669000] input: PS2++ Logitech Wheel Mouse as /class/input/input2
[4294684.684000] ts: Compaq touchscreen protocol output
[4294684.809000] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 201
[4294684.809000] PCI: Via IRQ fixup for 0000:00:12.0, from 10 to 9
[4294684.810000] eth0: VIA Rhine II at 0x1d800, 00:13:d4:fe:a3:be, IRQ 201.
[4294684.810000] eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 41e1.
[4294684.810000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
[4294684.811000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005
[4294685.094000] eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
[4294685.327000] lp0: using parport0 (interrupt-driven).
[4294685.356000] sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
[4294685.356000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)[4294685.356000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294685.411000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00110666400004a7][4294685.467000] Adding 3028212k swap on /dev/sda5. Priority:-1 extents:1 across:3028212k
[4294685.604000] EXT3 FS on sda1, internal journal
[4294685.751000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294685.751000] md: bitmap version 4.39
[4294686.363000] NET: Registered protocol family 17
[4294686.443000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294686.961000] cdrom: open failed.
[4294688.782000] ACPI: Power Button (FF) [PWRF]
[4294688.782000] ACPI: Power Button (CM) [PWRB]
[4294688.889000] ibm_acpi: ec object not found
[4294688.914000] pcc_acpi: loading...
[4294689.942000] NET: Registered protocol family 10
[4294689.943000] lo: Disabled Privacy Extensions
[4294689.943000] IPv6 over IPv4 tunneling driver
[4294695.511000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294695.511000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294695.511000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294695.736000] agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
[4294695.736000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294695.736000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[4294697.072000] apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
[4294697.072000] apm: overridden by ACPI.
[4294697.403000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294697.403000] hda: drive_cmd: error=0x04 { AbortedCommand }
[4294697.403000] ide: failed opcode was: 0xec
[4294697.523000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294697.523000] hda: drive_cmd: error=0x04 { AbortedCommand }
[4294697.523000] ide: failed opcode was: 0xec
[4294698.759000] Bluetooth: Core ver 2.8
[4294698.759000] NET: Registered protocol family 31
[4294698.759000] Bluetooth: HCI device and connection manager initialized
[4294698.759000] Bluetooth: HCI socket layer initialized
[4294698.842000] Bluetooth: L2CAP ver 2.8
[4294698.842000] Bluetooth: L2CAP socket layer initialized
[4294698.846000] Bluetooth: RFCOMM socket layer initialized
[4294698.846000] Bluetooth: RFCOMM TTY layer initialized
[4294698.846000] Bluetooth: RFCOMM ver 1.7
[4294700.073000] eth0: no IPv6 routers present
[4378200.805000] ibm_acpi: ec object not found
andrew at DapperBox:~$ alsamixer
alsamixer: function snd_ctl_open failed for default: No such device
andrew at DapperBox:~$ cat /proc/asound/modules
0 snd_via82xx
I have no idea why snd_seq_dummy 3844 0 is loading. Nor do I know how it is loaded. I haven't manually done this.
As a further piece of information, when booting the machine, I do get the Ubuntu "drum-sound" that comes when the login screen displays, but I don't get any sound after I log in.
Many thanks for looking at this.
Andrew.
--
After Kernel update (3/21/2006) no sound
https://launchpad.net/malone/bugs/36089
More information about the kernel-bugs
mailing list