[Bug 34351] Re: Pinnacle PCTV Rave saa7134
Ersplus
ersplus at free.fr
Thu Apr 6 06:02:31 UTC 2006
dmesg
[4294667.296000] Linux version 2.6.15-20-k7 (buildd at vernadsky) (gcc version 4.0.3 (Ubuntu 4.0.3-1ubuntu3)) #1 SMP PREEMPT Tue Apr 4 19:26:13 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000] BIOS-e820: 0000000000100000 - 000000002fff0000 (usable)
[4294667.296000] BIOS-e820: 000000002fff0000 - 000000002fff3000 (ACPI NVS)
[4294667.296000] BIOS-e820: 000000002fff3000 - 0000000030000000 (ACPI data)
[4294667.296000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[4294667.296000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[4294667.296000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 767MB LOWMEM available.
[4294667.296000] found SMP MP-table at 000f55d0
[4294667.296000] On node 0 totalpages: 196592
[4294667.296000] DMA zone: 4096 pages, LIFO batch:0
[4294667.296000] DMA32 zone: 0 pages, LIFO batch:0
[4294667.296000] Normal zone: 192496 pages, LIFO batch:31
[4294667.296000] HighMem zone: 0 pages, LIFO batch:0
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 VIAK8 ) @ 0x000f6f60
[4294667.296000] ACPI: RSDT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3000
[4294667.296000] ACPI: FADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff3040
[4294667.296000] ACPI: MADT (v001 VIAK8 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x2fff7ec0
[4294667.296000] ACPI: DSDT (v001 VIAK8 AWRDACPI 0x00001000 MSFT 0x0100000e) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x4008
[4294667.296000] ACPI: Local APIC address 0xfee00000
[4294667.296000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[4294667.296000] Processor #0 15:4 APIC version 16
[4294667.296000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[4294667.296000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[4294667.296000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[4294667.296000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[4294667.296000] ACPI: IRQ0 used by override.
[4294667.296000] ACPI: IRQ2 used by override.
[4294667.296000] ACPI: IRQ9 used by override.
[4294667.296000] Enabling APIC mode: Flat. Using 1 I/O APICs
[4294667.296000] Using ACPI (MADT) for SMP configuration information
[4294667.296000] Allocating PCI resources starting at 40000000 (gap: 30000000:cec00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda6 ro quiet splash
[4294667.296000] mapped APIC to ffffd000 (fee00000)
[4294667.296000] mapped IOAPIC to ffffc000 (fec00000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 4096 (order: 12, 65536 bytes)
[4294667.296000] Detected 2005.635 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294669.593000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[4294669.594000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294669.609000] Memory: 767744k/786368k available (2083k kernel code, 18012k reserved, 595k data, 328k init, 0k highmem)
[4294669.609000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294669.669000] Calibrating delay using timer specific routine.. 4011.98 BogoMIPS (lpj=2005993)
[4294669.669000] Security Framework v1.0.0 initialized
[4294669.669000] SELinux: Disabled at boot.
[4294669.669000] Mount-cache hash table entries: 512
[4294669.669000] CPU: After generic identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[4294669.669000] CPU: After vendor identify, caps: 078bfbff e1d3fbff 00000000 00000000 00000000 00000000 00000000
[4294669.669000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[4294669.669000] CPU: L2 Cache: 1024K (64 bytes/line)
[4294669.669000] CPU: After all inits, caps: 078bfbff e1d3fbff 00000000 00000010 00000000 00000000 00000000
[4294669.669000] mtrr: v2.0 (20020519)
[4294669.669000] Enabling fast FPU save and restore... done.
[4294669.669000] Enabling unmasked SIMD FPU exception support... done.
[4294669.669000] Checking 'hlt' instruction... OK.
[4294669.673000] SMP alternatives: switching to UP code
[4294669.673000] checking if image is initramfs... it is
[4294670.163000] Freeing initrd memory: 6529k freed
[4294670.174000] ACPI: Looking for DSDT ... not found!
[4294670.177000] CPU0: AMD Athlon(tm) 64 Processor 3200+ stepping 0a
[4294670.178000] Total of 1 processors activated (4011.98 BogoMIPS).
[4294670.178000] ENABLING IO-APIC IRQs
[4294670.178000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[4294670.289000] Brought up 1 CPUs
[4294670.289000] NET: Registered protocol family 16
[4294670.289000] EISA bus registered
[4294670.289000] ACPI: bus type pci registered
[4294670.292000] PCI: PCI BIOS revision 2.10 entry at 0xfb8e0, last bus=1
[4294670.292000] PCI: Using configuration type 1
[4294670.292000] ACPI: Subsystem revision 20051216
[4294670.298000] ACPI: Interpreter enabled
[4294670.298000] ACPI: Using IOAPIC for interrupt routing
[4294670.298000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.298000] PCI: Probing PCI hardware (bus 00)
[4294670.301000] Boot video device is 0000:01:00.0
[4294670.301000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.347000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 10 11 *12)
[4294670.347000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 11 12) *5
[4294670.347000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12)
[4294670.347000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 *11 12)
[4294670.348000] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294670.348000] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294670.348000] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294670.349000] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 6 7 10 11 12) *0, disabled.
[4294670.349000] ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled.
[4294670.349000] ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled.
[4294670.350000] ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled.
[4294670.350000] ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled.
[4294670.352000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.352000] pnp: PnP ACPI init
[4294670.356000] pnp: PnP ACPI: found 13 devices
[4294670.356000] PnPBIOS: Disabled by ACPI PNP
[4294670.356000] PCI: Using ACPI for IRQ routing
[4294670.356000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[4294670.377000] pnp: 00:01: ioport range 0x4000-0x407f could not be reserved
[4294670.377000] pnp: 00:01: ioport range 0x5000-0x500f has been reserved
[4294670.377000] PCI: Bridge: 0000:00:01.0
[4294670.377000] IO window: disabled.
[4294670.377000] MEM window: e8000000-e9ffffff
[4294670.377000] PREFETCH window: d0000000-dfffffff
[4294670.377000] PCI: Setting latency timer of device 0000:00:01.0 to 64
[4294670.377000] audit: initializing netlink socket (disabled)
[4294670.377000] audit(1144306260.375:1): initialized
[4294670.377000] VFS: Disk quotas dquot_6.5.1
[4294670.377000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.377000] Initializing Cryptographic API
[4294670.377000] io scheduler noop registered
[4294670.377000] io scheduler anticipatory registered
[4294670.377000] io scheduler deadline registered
[4294670.377000] io scheduler cfq registered
[4294670.378000] isapnp: Scanning for PnP cards...
[4294670.734000] isapnp: No Plug & Play device found
[4294670.745000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[4294670.745000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[4294670.745000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.745000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.745000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
[4294670.745000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.746000] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294670.747000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.747000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294670.747000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294670.747000] ACPI: bus type ide registered
[4294670.747000] mice: PS/2 mouse device common for all mice
[4294670.747000] EISA: Probing bus 0 at eisa.0
[4294670.747000] Cannot allocate resource for EISA slot 4
[4294670.747000] Cannot allocate resource for EISA slot 5
[4294670.747000] EISA: Detected 0 cards.
[4294670.747000] NET: Registered protocol family 2
[4294670.757000] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.757000] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
[4294670.759000] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[4294670.760000] TCP: Hash tables configured (established 131072 bind 65536)
[4294670.760000] TCP reno registered
[4294670.760000] TCP bic registered
[4294670.760000] NET: Registered protocol family 1
[4294670.760000] NET: Registered protocol family 8
[4294670.760000] NET: Registered protocol family 20
[4294670.760000] Using IPI No-Shortcut mode
[4294670.760000] ACPI wakeup devices:
[4294670.760000] PCI0 USB0 USB1 USB2 USB3 USB4 USB5 USB6 LAN0 AC97 UAR1
[4294670.760000] ACPI: (supports S0 S3 S4 S5)
[4294670.760000] Freeing unused kernel memory: 328k freed
[4294670.796000] input: AT Translated Set 2 keyboard as /class/input/input0
[4294670.817000] vga16fb: initializing
[4294670.817000] vga16fb: mapped to 0xc00a0000
[4294670.944000] Console: switching to colour frame buffer device 80x25
[4294670.944000] fb0: VGA16 VGA frame buffer device
[4294672.067000] Capability LSM initialized
[4294672.092000] ACPI: Fan [FAN] (on)
[4294672.097000] ACPI: Thermal Zone [THRM] (14 C)
[4294672.518000] VP_IDE: IDE controller at PCI slot 0000:00:0f.0
[4294672.518000] **** SET: Misaligned resource pointer: ef3add02 Type 07 Len 0
[4294672.519000] ACPI: PCI Interrupt Link [ALKA] BIOS reported IRQ 0, using IRQ 20
[4294672.519000] ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
[4294672.519000] ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [ALKA] -> GSI 20 (level, low) -> IRQ 169
[4294672.519000] PCI: Via IRQ fixup for 0000:00:0f.0, from 255 to 9
[4294672.519000] VP_IDE: chipset revision 6
[4294672.519000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.519000] VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.0
[4294672.519000] ide0: BM-DMA at 0xd400-0xd407, BIOS settings: hda:DMA, hdb:pio
[4294672.519000] ide1: BM-DMA at 0xd408-0xd40f, BIOS settings: hdc:DMA, hdd:DMA
[4294672.519000] Probing IDE interface ide0...
[4294672.908000] hda: ST3200021A, ATA DISK drive
[4294673.521000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.521000] Probing IDE interface ide1...
[4294674.317000] hdc: SONY DVD RW DW-U18A, ATAPI CD/DVD-ROM drive
[4294675.032000] hdd: SONY DVD-ROM DDU1612, ATAPI CD/DVD-ROM drive
[4294675.084000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.089000] hda: max request size: 1024KiB
[4294675.098000] hda: 390721968 sectors (200049 MB) w/2048KiB Cache, CHS=24321/255/63, UDMA(100)
[4294675.099000] hda: cache flushes supported
[4294675.099000] hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 hda10 >
[4294675.182000] hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
[4294675.182000] Uniform CD-ROM driver Revision: 3.20
[4294675.190000] hdd: ATAPI 40X DVD-ROM drive, 512kB Cache, UDMA(33)
[4294675.605000] usbcore: registered new driver usbfs
[4294675.605000] usbcore: registered new driver hub
[4294675.607000] USB Universal Host Controller Interface driver v2.3
[4294675.608000] **** SET: Misaligned resource pointer: ef3ad942 Type 07 Len 0
[4294675.608000] ACPI: PCI Interrupt Link [ALKB] BIOS reported IRQ 0, using IRQ 21
[4294675.608000] ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
[4294675.608000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294675.608000] PCI: Via IRQ fixup for 0000:00:10.0, from 12 to 1
[4294675.608000] uhci_hcd 0000:00:10.0: UHCI Host Controller
[4294675.609000] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[4294675.609000] uhci_hcd 0000:00:10.0: irq 177, io base 0x0000d800
[4294675.610000] hub 1-0:1.0: USB hub found
[4294675.610000] hub 1-0:1.0: 2 ports detected
[4294675.712000] ACPI: PCI Interrupt 0000:00:10.1[A] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294675.712000] PCI: Via IRQ fixup for 0000:00:10.1, from 12 to 1
[4294675.712000] uhci_hcd 0000:00:10.1: UHCI Host Controller
[4294675.712000] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
[4294675.712000] uhci_hcd 0000:00:10.1: irq 177, io base 0x0000dc00
[4294675.712000] hub 2-0:1.0: USB hub found
[4294675.712000] hub 2-0:1.0: 2 ports detected
[4294675.813000] ACPI: PCI Interrupt 0000:00:10.2[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294675.813000] PCI: Via IRQ fixup for 0000:00:10.2, from 5 to 1
[4294675.813000] uhci_hcd 0000:00:10.2: UHCI Host Controller
[4294675.814000] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
[4294675.814000] uhci_hcd 0000:00:10.2: irq 177, io base 0x0000e000
[4294675.814000] hub 3-0:1.0: USB hub found
[4294675.814000] hub 3-0:1.0: 2 ports detected
[4294675.915000] ACPI: PCI Interrupt 0000:00:10.3[B] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294675.915000] PCI: Via IRQ fixup for 0000:00:10.3, from 5 to 1
[4294675.915000] uhci_hcd 0000:00:10.3: UHCI Host Controller
[4294675.916000] uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
[4294675.916000] uhci_hcd 0000:00:10.3: irq 177, io base 0x0000e400
[4294675.916000] hub 4-0:1.0: USB hub found
[4294675.916000] hub 4-0:1.0: 2 ports detected
[4294675.917000] usb 1-1: new low speed USB device using uhci_hcd and address 2
[4294676.020000] ACPI: PCI Interrupt 0000:00:10.4[C] -> Link [ALKB] -> GSI 21 (level, low) -> IRQ 177
[4294676.020000] PCI: Via IRQ fixup for 0000:00:10.4, from 11 to 1
[4294676.020000] ehci_hcd 0000:00:10.4: EHCI Host Controller
[4294676.020000] ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
[4294676.020000] ehci_hcd 0000:00:10.4: irq 177, io mem 0xea404000
[4294676.020000] ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[4294676.020000] hub 5-0:1.0: USB hub found
[4294676.020000] hub 5-0:1.0: 8 ports detected
[4294676.288000] Attempting manual resume
[4294676.317000] EXT3-fs: mounted filesystem with ordered data mode.
[4294676.317000] kjournald starting. Commit interval 5 seconds
[4294676.436000] usb 1-1: device not accepting address 2, error -71
[4294678.197000] usb 1-1: new low speed USB device using uhci_hcd and address 4
[4294678.574000] usb 1-2: new full speed USB device using uhci_hcd and address 5[4294679.027000] usb 2-1: new full speed USB device using uhci_hcd and address 2[4294679.141000] usb 2-1: device descriptor read/64, error -71
[4294679.356000] usb 2-1: device descriptor read/64, error -71
[4294679.559000] usb 2-1: new full speed USB device using uhci_hcd and address 3[4294679.673000] usb 2-1: device descriptor read/64, error -71
[4294679.888000] usb 2-1: device descriptor read/64, error -71
[4294680.091000] usb 2-1: new full speed USB device using uhci_hcd and address 4[4294680.501000] usb 2-1: device not accepting address 4, error -71
[4294680.603000] usb 2-1: new full speed USB device using uhci_hcd and address 5[4294681.013000] usb 2-1: device not accepting address 5, error -71
[4294681.219000] usb 3-2: new full speed USB device using uhci_hcd and address 2[4294681.563000] usb 4-1: new low speed USB device using uhci_hcd and address 2
[4294684.995000] Linux video capture interface: v1.00
[4294685.261000] Linux agpgart interface v0.101 (c) Dave Jones
[4294685.262000] agpgart: Detected AGP bridge 0
[4294685.266000] agpgart: AGP aperture is 128M @ 0xe0000000
[4294685.277000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294685.321000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294685.379000] ieee1394: Initialized config rom entry `ip1394'
[4294685.388000] ohci1394: $Rev: 1313 $ Ben Collins <bcollins at debian.org>
[4294685.388000] ACPI: PCI Interrupt 0000:00:0e.0[A] -> GSI 19 (level, low) -> IRQ 185
[4294685.388000] PCI: Via IRQ fixup for 0000:00:0e.0, from 11 to 9
[4294685.397000] saa7130/34: v4l2 driver version 0.2.14 loaded
[4294685.397000] ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 17 (level, low) -> IRQ 193
[4294685.398000] saa7134[0]: found at 0000:00:06.0, rev: 1, irq: 193, latency: 32, mmio: 0xea402000
[4294685.398000] saa7134[0]: subsystem: 16be:0003, board: Medion 7134 [card=12,autodetected]
[4294685.398000] saa7134[0]: board init: gpio is 0
[4294685.442000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[185] MMIO=[ea403000-ea4037ff] Max Packet=[2048]
[4294685.521000] saa7134[0]: i2c eeprom 00: be 16 03 00 08 20 1c 55 43 43 a9 1c 55 43 43 a9
[4294685.521000] saa7134[0]: i2c eeprom 10: ff ff ff ff 15 00 0e 01 0c c0 08 00 00 00 00 00
[4294685.521000] saa7134[0]: i2c eeprom 20: 00 00 00 e3 ff ff ff ff ff ff ff ff ff ff ff ff
[4294685.521000] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294685.521000] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294685.521000] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294685.521000] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294685.521000] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[4294685.527000] saa7134[0] Tuner type is 38
[4294685.573000] tuner 0-0060: All bytes are equal. It is not a TEA5767
[4294685.573000] tuner 0-0060: chip found @ 0xc0 (saa7134[0])
[4294685.573000] tuner 0-0060: type set to 38 (Philips PAL/SECAM multi (FM1216ME MK3))
[4294685.596000] nvidia: module license 'NVIDIA' taints kernel.
[4294685.609000] tda9887 0-0043: chip found @ 0x86 (saa7134[0])
[4294685.612000] saa7134[0]: registered device video0 [v4l2]
[4294685.612000] saa7134[0]: registered device vbi0
[4294685.612000] saa7134[0]: registered device radio0
[4294685.618000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 18 (level, low) -> IRQ 201
[4294685.618000] rt2500 1.1.0 BETA3 2005/07/31 http://rt2x00.serialmonkey.com
[4294685.618000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 209
[4294685.619000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:22:51 PST 2005
[4294685.994000] Real Time Clock Driver v1.12
[4294686.006000] input: PC Speaker as /class/input/input1
[4294686.054000] Floppy drive(s): fd0 is 1.44M
[4294686.070000] FDC 0 is a post-1991 82077
[4294686.126000] usbcore: registered new driver hiddev
[4294686.155000] input: Microsoft Microsoft IntelliMouse� Optical as /class/input/input2
[4294686.155000] input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse� Optical] on usb-0000:00:10.0-1
[4294686.155000] usbcore: registered new driver usbhid
[4294686.155000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[4294686.165000] parport: PnPBIOS parport detected.
[4294686.165000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[4294686.479000] ts: Compaq touchscreen protocol output
[4294686.543000] SCSI subsystem initialized
[4294686.577000] input: X10 Wireless Technology Inc USB Receiver as /class/input/input3
[4294686.577000] usbcore: registered new driver ati_remote
[4294686.577000] drivers/usb/input/ati_remote.c: Registered USB driver ATI/X10 RF USB Remote Control v. 2.2.1
[4294686.584000] drivers/usb/input/ati_remote.c: Weird data, len=1 ff 00 00 00 00 00 ...
[4294686.670000] pwc Philips webcam module version 10.0.7-unofficial loaded.
[4294686.670000] pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
[4294686.670000] pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
[4294686.670000] pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
[4294686.670000] pwc Trace options: 0x00a1
[4294686.670000] pwc Philips PCVC730K (ToUCam Fun)/PCVC830 (ToUCam II) USB webcam detected.
[4294686.697000] pwc Registered as /dev/video1.
[4294686.697000] usbcore: registered new driver Philips webcam
[4294686.703000] Initializing USB Mass Storage driver...
[4294686.711000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc000056ebb4][4294686.737000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294686.737000] Please try dxs_support=5 option
[4294686.737000] and report if it works on your machine.
[4294686.737000] For more details, read ALSA-Configuration.txt.
[4294686.737000] **** SET: Misaligned resource pointer: e9a5ff02 Type 07 Len 0
[4294686.737000] ACPI: PCI Interrupt Link [ALKC] BIOS reported IRQ 0, using IRQ 22
[4294686.737000] ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
[4294686.737000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [ALKC] -> GSI 22 (level, low) -> IRQ 217
[4294686.737000] PCI: Via IRQ fixup for 0000:00:11.5, from 11 to 9
[4294686.737000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294686.750000] usbcore: registered new driver snd-usb-audio
[4294686.754000] scsi0 : SCSI emulation for USB Mass Storage devices
[4294686.754000] usb-storage: device found at 2
[4294686.754000] usb-storage: waiting for device to settle before scanning
[4294686.754000] usbcore: registered new driver usb-storage
[4294686.754000] USB Mass Storage support registered.
[4294687.634000] lp0: using parport0 (interrupt-driven).
[4294687.658000] sbp2: $Rev: 1306 $ Ben Collins <bcollins at debian.org>
[4294687.658000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)[4294687.658000] ieee1394: sbp2: Try serialize_io=0 for better performance
[4294687.705000] Adding 979924k swap on /dev/hda7. Priority:-1 extents:1 across:979924k
[4294687.819000] EXT3 FS on hda6, internal journal
[4294687.949000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294687.949000] md: bitmap version 4.39
[4294688.621000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294688.668000] NET: Registered protocol family 10
[4294688.668000] lo: Disabled Privacy Extensions
[4294688.668000] IPv6 over IPv4 tunneling driver
[4294688.986000] cdrom: open failed.
[4294689.432000] cdrom: open failed.
[4294689.433000] cdrom: open failed.
[4294691.791000] Vendor: Generic Model: Card Reader CF Rev: v1.0
[4294691.791000] Type: Direct-Access ANSI SCSI revision: 00
[4294691.795000] Vendor: Generic Model: Card Reader MS Rev: v1.0
[4294691.795000] Type: Direct-Access ANSI SCSI revision: 00
[4294691.798000] Vendor: Generic Model: Card ReadeMMC/SD Rev: v1.0
[4294691.798000] Type: Direct-Access ANSI SCSI revision: 00
[4294691.801000] Vendor: Generic Model: Card Reader SM Rev: v1.0
[4294691.801000] Type: Direct-Access ANSI SCSI revision: 00
[4294691.802000] usb-storage: device scan complete
[4294691.872000] sd 0:0:0:0: Attached scsi removable disk sda
[4294691.887000] sd 0:0:0:1: Attached scsi removable disk sdb
[4294691.902000] sd 0:0:0:2: Attached scsi removable disk sdc
[4294691.916000] sd 0:0:0:3: Attached scsi removable disk sdd
[4294691.943000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[4294691.943000] sd 0:0:0:1: Attached scsi generic sg1 type 0
[4294691.943000] sd 0:0:0:2: Attached scsi generic sg2 type 0
[4294691.944000] sd 0:0:0:3: Attached scsi generic sg3 type 0
[4294694.369000] kjournald starting. Commit interval 5 seconds
[4294694.369000] EXT3 FS on hda8, internal journal
[4294694.369000] EXT3-fs: mounted filesystem with ordered data mode.
[4294694.559000] kjournald starting. Commit interval 5 seconds
[4294694.559000] EXT3 FS on hda10, internal journal
[4294694.559000] EXT3-fs: mounted filesystem with ordered data mode.
[4294695.583000] ACPI: Power Button (FF) [PWRF]
[4294695.583000] ACPI: Power Button (CM) [PWRB]
[4294695.661000] ibm_acpi: ec object not found
[4294695.679000] pcc_acpi: loading...
[4294696.092000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.50.4)
[4294696.092000] powernow-k8: 0 : fid 0xc (2000 MHz), vid 0x2 (1500 mV)
[4294696.092000] powernow-k8: 1 : fid 0xa (1800 MHz), vid 0x6 (1400 mV)
[4294696.092000] powernow-k8: 2 : fid 0x2 (1000 MHz), vid 0x12 (1100 mV)
[4294696.092000] cpu_init done, current fid 0xc, vid 0x2
[4294698.669000] ra0: no IPv6 routers present
[4294698.978000] NVRM: not using NVAGP, an AGPGART backend is loaded!
[4294699.211000] NVRM: not using NVAGP, an AGPGART backend is loaded!
[4294700.868000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294700.868000] apm: overridden by ACPI.
[4294701.909000] ra0 (WE) : Driver using old /proc/net/wireless support, please fix driver !
[4294704.766000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294704.766000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294704.766000] ide: failed opcode was: 0xec
[4294704.771000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294704.771000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294704.771000] ide: failed opcode was: 0xec
[4294705.103000] hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294705.103000] hdc: drive_cmd: error=0x04 { AbortedCommand }
[4294705.103000] ide: failed opcode was: 0xec
[4294705.108000] hdd: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[4294705.108000] hdd: drive_cmd: error=0x04 { AbortedCommand }
[4294705.108000] ide: failed opcode was: 0xec
[4294705.698000] Bluetooth: Core ver 2.8
[4294705.698000] NET: Registered protocol family 31
[4294705.698000] Bluetooth: HCI device and connection manager initialized
[4294705.698000] Bluetooth: HCI socket layer initialized
[4294705.774000] Bluetooth: L2CAP ver 2.8
[4294705.774000] Bluetooth: L2CAP socket layer initialized
[4294705.834000] Bluetooth: RFCOMM socket layer initialized
[4294705.834000] Bluetooth: RFCOMM TTY layer initialized
[4294705.834000] Bluetooth: RFCOMM ver 1.7
[4298016.211000] saa7134[0]/irq[10,3048915]: r=0x20 s=0x10 PE
[4298016.211000] saa7134[0]/irq: looping -- clearing PE (parity error!) enable b
** Changed in: linux-source-2.6.15 (Ubuntu)
Status: Needs Info => Confirmed
--
Pinnacle PCTV Rave saa7134
https://launchpad.net/malone/bugs/34351
More information about the kernel-bugs
mailing list