[Bug 31351] Epson Stylus CX 6400 Not Working in Dapper

Tor Harald Thorland linux at strigen.com
Tue Apr 4 02:08:24 UTC 2006 

Public bug reported:

Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
     Assignee: Ben Collins
         Status: Unconfirmed


Description:
My Epson Stylus CX 6400 Printer/Scanner is not working in Dapper. It doesn't show up as it used to in Breezy (Where it was working)
It is not detected in the printer setup dialog.

In the var/log messages I'll get the following:

Feb 13 19:21:48 localhost kernel: [4294877.076000] usb 5-6: new high speed USB device using ehci_hcd and address 4
Feb 13 19:21:48 localhost kernel: [4294877.467000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0805
Feb 13 19:21:48 localhost kernel: [4294877.468000] usbcore: registered new driver usblp
Feb 13 19:21:48 localhost kernel: [4294877.468000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Feb 13 19:21:48 localhost kernel: [4294877.547000] Initializing USB Mass Storage driver...
Feb 13 19:21:48 localhost kernel: [4294877.548000] scsi2 : SCSI emulation for USB Mass Storage devices
Feb 13 19:21:48 localhost kernel: [4294877.548000] usbcore: registered new driver usb-storage
Feb 13 19:21:48 localhost kernel: [4294877.548000] USB Mass Storage support registered.
Feb 13 19:21:53 localhost kernel: [4294882.559000]   Vendor: EPSON     Model: Stylus Storage    Rev: 1.00
Feb 13 19:21:53 localhost kernel: [4294882.559000]   Type:   Direct-Access                      ANSI SCSI revision: 02
Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi removable disk sdb
Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi generic sg2 type 0
Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.772000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.776000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.776000]  sdb:<3>Buffer I/O error on device sdb, logical block 0
Feb 13 19:24:02 localhost kernel: [4295011.776000]  unable to read partition table
Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.790000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.790000]  sdb:<3>Buffer I/O error on device sdb, logical block 0
Feb 13 19:24:02 localhost kernel: [4295011.790000]  unable to read partition table
Feb 13 19:24:02 localhost kernel: [4295011.901000] usb 5-6: USB disconnect, address 4
Feb 13 19:24:02 localhost kernel: [4295011.901000] drivers/usb/class/usblp.c: usblp0: removed


Please advice me how to give you more info about it.
Public bug reported:

Affects: linux-source-2.6.15 (Ubuntu)
       Severity: Normal
       Priority: (none set)
     Assignee: Ben Collins
         Status: Unconfirmed


Description:
My Epson Stylus CX 6400 Printer/Scanner is not working in Dapper. It doesn't show up as it used to in Breezy (Where it was working)
It is not detected in the printer setup dialog.

In the var/log messages I'll get the following:

Feb 13 19:21:48 localhost kernel: [4294877.076000] usb 5-6: new high speed USB device using ehci_hcd and address 4
Feb 13 19:21:48 localhost kernel: [4294877.467000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0805
Feb 13 19:21:48 localhost kernel: [4294877.468000] usbcore: registered new driver usblp
Feb 13 19:21:48 localhost kernel: [4294877.468000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
Feb 13 19:21:48 localhost kernel: [4294877.547000] Initializing USB Mass Storage driver...
Feb 13 19:21:48 localhost kernel: [4294877.548000] scsi2 : SCSI emulation for USB Mass Storage devices
Feb 13 19:21:48 localhost kernel: [4294877.548000] usbcore: registered new driver usb-storage
Feb 13 19:21:48 localhost kernel: [4294877.548000] USB Mass Storage support registered.
Feb 13 19:21:53 localhost kernel: [4294882.559000]   Vendor: EPSON     Model: Stylus Storage    Rev: 1.00
Feb 13 19:21:53 localhost kernel: [4294882.559000]   Type:   Direct-Access                      ANSI SCSI revision: 02
Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi removable disk sdb
Feb 13 19:21:53 localhost kernel: [4294882.563000] sd 2:0:0:0: Attached scsi generic sg2 type 0
Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.771000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.772000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.775000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.776000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.776000]  sdb:<3>Buffer I/O error on device sdb, logical block 0
Feb 13 19:24:02 localhost kernel: [4295011.776000]  unable to read partition table
Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.783000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.784000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : READ CAPACITY failed.
Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : status=0, message=00, host=7, driver=00 
Feb 13 19:24:02 localhost kernel: [4295011.789000] sdb : sense not available. 
Feb 13 19:24:02 localhost kernel: [4295011.790000] sdb: Write Protect is off
Feb 13 19:24:02 localhost kernel: [4295011.790000]  sdb:<3>Buffer I/O error on device sdb, logical block 0
Feb 13 19:24:02 localhost kernel: [4295011.790000]  unable to read partition table
Feb 13 19:24:02 localhost kernel: [4295011.901000] usb 5-6: USB disconnect, address 4
Feb 13 19:24:02 localhost kernel: [4295011.901000] drivers/usb/class/usblp.c: usblp0: removed


Please advice me how to give you more info about it.
-- 
Epson Stylus CX 6400 Not Working in Dapper
https://launchpad.net/malone/bugs/31351

More information about the kernel-bugs mailing list