[Bug 14394] Re: cdrecord/k3b/nautilus problem

[Richard Kleeman]

Reinstalled dapper from a fresh breezy install using apt-get dist-upgrade. The latest kernel (2.6.15-19) with version 3.0 of aic79xx now boots however during the boot the same error message as previously occurs. I have listed it:

[4294705.439000] SCSI device sda: 286749488 512-byte hdwr sectors (146816 MB)
[4294705.954000] scsi1: Invalid Sequencer interrupt occurred.
[4294705.954000] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
[4294705.954000] scsi1: Dumping Card State at program address 0x236 Mode 0x0
[4294705.954000] Card was paused
[4294705.954000] INTSTAT[0x0] SELOID[0x4] SELID[0x0]
[4294705.954000] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK)
[4294705.954000] SEQINTSTAT[0x0] SAVED_MODE[0x11]
[4294705.954000] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[4294705.954000] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0]
[4294705.954000] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
[4294705.954000] SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
[4294705.954000] SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
[4294705.954000] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x1]
[4294705.954000] KERNEL_QFREEZE_COUNT[0x1] MK_MESSAGE_SCB[0xff00]
[4294705.954000] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
[4294705.954000] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0]
[4294705.954000] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[4294705.954000] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
[4294705.954000] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
[4294705.954000]
[4294705.954000] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x3 NEXTSCB 0xff80
[4294705.954000] qinstart = 30 qinfifonext = 30
[4294705.954000] QINFIFO:
[4294705.954000] WAITING_TID_QUEUES:
[4294705.954000] Pending list:
[4294705.954000] Total 0
[4294705.954000] Kernel Free SCB list: 2 3 1 0
[4294705.954000] Sequencer Complete DMA-inprog list:
[4294705.954000] Sequencer Complete list:
[4294705.954000] Sequencer DMA-Up and Complete list:
[4294705.954000] Sequencer On QFreeze and Complete list:
[4294705.954000]
[4294705.954000]
[4294705.954000] scsi1: FIFO0 Free, LONGJMP == 0x8000, SCB 0x2
[4294705.954000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[4294705.954000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[4294705.954000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0]
[4294705.954000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO)
[4294705.954000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0
[4294705.954000] CCSGCTL[0x10]:(SG_CACHE_AVAIL)
[4294705.954000]
[4294705.954000] scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[4294705.954000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[4294705.954000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[4294705.954000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0]
[4294705.954000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO)
[4294705.954000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0
[4294705.954000] CCSGCTL[0x10]:(SG_CACHE_AVAIL)
[4294705.954000] LQIN: 0x8 0x0 0x0 0x2 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[4294705.954000] scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[4294705.954000] scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
[4294705.954000] scsi1: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[4294705.954000] SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
[4294705.954000] CCSCBCTL[0x4]:(CCSCBDIR)
[4294705.954000] scsi1: REG0 == 0x4d60, SINDEX = 0x10e, DINDEX = 0x10a
[4294705.954000] scsi1: SCBPTR == 0x2, SCB_NEXT == 0xff80, SCB_NEXT2 == 0xff81
[4294705.954000] CDB 1a 0 8 80 8 68
[4294705.954000] STACK: 0x1a 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[4294705.954000] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
[4294707.265000] scsi1: Invalid Sequencer interrupt occurred.
[4294707.265000] >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
[4294707.265000] scsi1: Dumping Card State at program address 0x236 Mode 0x0
[4294707.265000] Card was paused
[4294707.265000] INTSTAT[0x0] SELOID[0xa] SELID[0x0]
[4294707.265000] HS_MAILBOX[0x0] INTCTL[0x80]:(SWTMINTMASK)
[4294707.265000] SEQINTSTAT[0x0] SAVED_MODE[0x11]
[4294707.265000] DFFSTAT[0x33]:(CURRFIFO_NONE|FIFO0FREE|FIFO1FREE)
[4294707.265000] SCSISIGI[0x0]:(P_DATAOUT) SCSIPHASE[0x0]
[4294707.265000] SCSIBUS[0x0] LASTPHASE[0x1]:(P_DATAOUT|P_BUSFREE)
[4294707.265000] SCSISEQ0[0x0] SCSISEQ1[0x12]:(ENAUTOATNP|ENRSELI)
[4294707.265000] SEQCTL0[0x0] SEQINTCTL[0x6]:(INTMASK1|INTMASK2)
[4294707.265000] SEQ_FLAGS[0x0] SEQ_FLAGS2[0x0] QFREEZE_COUNT[0x2]
[4294707.265000] KERNEL_QFREEZE_COUNT[0x2] MK_MESSAGE_SCB[0xff00]
[4294707.265000] MK_MESSAGE_SCSIID[0xff] SSTAT0[0x0]
[4294707.265000] SSTAT1[0x0] SSTAT2[0x0] SSTAT3[0x0]
[4294707.265000] PERRDIAG[0x0] SIMODE1[0xa4]:(ENSCSIPERR|ENSCSIRST|ENSELTIMO)
[4294707.265000] LQISTAT0[0x0] LQISTAT1[0x0] LQISTAT2[0x0]
[4294707.265000] LQOSTAT0[0x0] LQOSTAT1[0x0] LQOSTAT2[0xe1]:(LQOSTOP0|LQOPKT)
[4294707.265000]
[4294707.265000] SCB Count = 4 CMDS_PENDING = 0 LASTSCB 0xffff CURRSCB 0x2 NEXTSCB 0xffc0
[4294707.265000] qinstart = 38 qinfifonext = 38
[4294707.265000] QINFIFO:
[4294707.265000] WAITING_TID_QUEUES:
[4294707.265000] Pending list:
[4294707.265000] Total 0
[4294707.265000] Kernel Free SCB list: 3 2 1 0
[4294707.265000] Sequencer Complete DMA-inprog list:
[4294707.265000] Sequencer Complete list:
[4294707.265000] Sequencer DMA-Up and Complete list:
[4294707.265000] Sequencer On QFreeze and Complete list:
[4294707.265000]
[4294707.265000]
[4294707.265000] scsi1: FIFO0 Free, LONGJMP == 0x8000, SCB 0x3
[4294707.265000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[4294707.265000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[4294707.265000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0]
[4294707.265000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO)
[4294707.265000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0
[4294707.265000] CCSGCTL[0x10]:(SG_CACHE_AVAIL)
[4294707.265000]
[4294707.265000] scsi1: FIFO1 Free, LONGJMP == 0x8063, SCB 0x3
[4294707.265000] SEQIMODE[0x3f]:(ENCFG4TCMD|ENCFG4ICMD|ENCFG4TSTAT|ENCFG4ISTAT|ENCFG4DATA|ENSAVEPTRS)
[4294707.265000] SEQINTSRC[0x0] DFCNTRL[0x0] DFSTATUS[0x89]:(FIFOEMP|HDONE|PRELOAD_AVAIL)
[4294707.265000] SG_CACHE_SHADOW[0x2]:(LAST_SEG) SG_STATE[0x0]
[4294707.265000] DFFSXFRCTL[0x0] SOFFCNT[0x0] MDFFSTAT[0x5]:(FIFOFREE|DLZERO)
[4294707.265000] SHADDR = 0x00, SHCNT = 0x0 HADDR = 0x00, HCNT = 0x0
[4294707.265000] CCSGCTL[0x10]:(SG_CACHE_AVAIL)
[4294707.265000] LQIN: 0x8 0x0 0x0 0x3 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[4294707.265000] scsi1: LQISTATE = 0x0, LQOSTATE = 0x0, OPTIONMODE = 0x52
[4294707.265000] scsi1: OS_SPACE_CNT = 0x20 MAXCMDCNT = 0x1
[4294707.265000] scsi1: SAVED_SCSIID = 0x0 SAVED_LUN = 0x0
[4294707.265000] SIMODE0[0xc]:(ENOVERRUN|ENIOERR)
[4294707.265000] CCSCBCTL[0x4]:(CCSCBDIR)
[4294707.265000] scsi1: REG0 == 0x4d60, SINDEX = 0x10e, DINDEX = 0x116
[4294707.265000] scsi1: SCBPTR == 0x3, SCB_NEXT == 0xffc0, SCB_NEXT2 == 0xff81
[4294707.265000] CDB 1a 0 8 80 8 6c
[4294707.265000] STACK: 0x1a 0x0 0x0 0x0 0x0 0x0 0x0 0x0
[4294707.265000] <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>

After booting into the new dapper I inserted a written CD-R in the burner and similar error messages as above occur but not kernel lockups occur now at least.




-- 
cdrecord/k3b/nautilus problem
https://launchpad.net/malone/bugs/14394