[Bug 37703] linux-image-2.6.15 fails to boot on Lifebook B2131

Sun Apr 2 10:56:49 UTC 2006

Public bug reported:

Affects: linux-source-2.6.15 linux-image-2.6.15-19-386 (Ubuntu)
       Severity: Normal
       Priority: (none set)
         Status: Unconfirmed

Description:
When trying to boot from linux-image-2.6.15-19-386, the computer crashes
directly after the 'ok, booting linux' message.  There might be a
message (two or three lines) like '..error inserting...' just before the
crash, but it's too brief to see properly.

Here is a picture of the garbled on-screen image I get when I crash:

http://henrik.synth.no/ubuntu/crash-2.6.15.jpg

If I remove 'splash' from the grub boot line, the computer just freezes
after 'ok booting linux'.  No more info is displayed.

I have a Fujitsu-Siemens Lifebook B2131 laptop with xubuntu-
desktop/dapper installed.

Here is the dmesg when booting (succesfully) with the latest 2.6.12
kernel, it might give some clues on my hardware:

[4294667.296000] Linux version 2.6.12-10-386 (buildd at terranova) (gcc version 3.4.5 20050809 (prerelease) (Ubuntu 3.4.4-6ubuntu8.1)) #1 Sat Mar 11 16:13:17 UTC 2006
[4294667.296000] BIOS-provided physical RAM map:
[4294667.296000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[4294667.296000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[4294667.296000]  BIOS-e820: 00000000000ec400 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 0000000007fe0000 (usable)
[4294667.296000]  BIOS-e820: 0000000007fe0000 - 0000000007fefc00 (ACPI data)
[4294667.296000]  BIOS-e820: 0000000007fefc00 - 0000000007ff0000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 0000000007ff0000 - 0000000007ff1000 (reserved)
[4294667.296000]  BIOS-e820: 0000000007ff1000 - 0000000008000000 (usable)
[4294667.296000]  BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 128MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 32768
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
[4294667.296000]   Normal zone: 28672 pages, LIFO batch:15
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI 2.3 present.
[4294667.296000] ACPI: RSDP (v000 FUJ                                   ) @ 0x000f68d0
[4294667.296000] ACPI: RSDT (v001 FUJ    CHIFFON  0x01080000 FUJ  0x00001000) @ 0x07fecb24
[4294667.296000] ACPI: FADT (v001 FUJ    CHIFFON  0x01080000 FUJ  0x00001000) @ 0x07fefb8c
[4294667.296000] ACPI: DSDT (v001 FUJ    CHIFFON  0x01080000 MSFT 0x01000007) @ 0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0xff08
[4294667.296000] Allocating PCI resources starting at 08000000 (gap: 08000000:f7f00000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda2 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01101000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 398.293 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294667.728000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294667.729000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[4294667.746000] Memory: 121092k/131072k available (1416k kernel code, 9224k reserved, 762k data, 224k init, 0k highmem)
[4294667.746000] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[4294667.746000] Calibrating delay loop... 788.48 BogoMIPS (lpj=394240)
[4294667.769000] Security Framework v1.0.0 initialized
[4294667.769000] SELinux:  Disabled at boot.
[4294667.769000] Mount-cache hash table entries: 512
[4294667.769000] CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.769000] CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
[4294667.769000] CPU: L1 I cache: 16K, L1 D cache: 16K
[4294667.769000] CPU: L2 cache: 128K
[4294667.769000] CPU: After all inits, caps: 0383f9ff 00000000 00000000 00000040 00000000 00000000 00000000
[4294667.769000] CPU: Intel Celeron (Coppermine) stepping 01
[4294667.769000] Enabling fast FPU save and restore... done.
[4294667.769000] Enabling unmasked SIMD FPU exception support... done.
[4294667.769000] Checking 'hlt' instruction... OK.
[4294667.773000] Checking for popad bug... OK.
[4294667.773000] checking if image is initramfs... it is
[4294669.808000] Freeing initrd memory: 5319k freed
[4294669.812000] ACPI: Looking for DSDT in initrd... not found!
[4294670.119000]  not found!
[4294670.183000] NET: Registered protocol family 16
[4294670.184000] EISA bus registered
[4294670.184000] ACPI: bus type pci registered
[4294670.185000] PCI: PCI BIOS revision 2.10 entry at 0xfd9be, last bus=1
[4294670.185000] PCI: Using configuration type 1
[4294670.185000] mtrr: v2.0 (20020519)
[4294670.186000] ACPI: Subsystem revision 20050729
[4294670.211000] ACPI: Interpreter enabled
[4294670.211000] ACPI: Using PIC for interrupt routing
[4294670.212000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.212000] PCI: Probing PCI hardware (bus 00)
[4294670.212000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294670.212000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294670.225000] Boot video device is 0000:00:14.0
[4294670.230000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.236000] burst-mode-ec-10-Aug
[4294670.236000] ACPI: Embedded Controller [EC] (gpe 44)
[4294670.251000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
[4294670.253000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
[4294670.254000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11)
[4294670.256000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11)
[4294670.257000] ACPI: Power Resource [USBP] (on)
[4294670.261000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.261000] pnp: PnP ACPI init
[4294670.277000] pnp: PnP ACPI: found 10 devices
[4294670.277000] PnPBIOS: Disabled by ACPI PNP
[4294670.277000] PCI: Using ACPI for IRQ routing
[4294670.277000] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report[4294670.280000] pnp: 00:00: ioport range 0x4d0-0x4d1 has been reserved
[4294670.280000] pnp: 00:00: ioport range 0xff00-0xff3f could not be reserved
[4294670.280000] pnp: 00:00: ioport range 0xf800-0xf87f has been reserved
[4294670.282000] audit: initializing netlink socket (disabled)
[4294670.282000] audit: initialized
[4294670.283000] VFS: Disk quotas dquot_6.5.1
[4294670.283000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.283000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[4294670.283000] devfs: boot_options: 0x0
[4294670.283000] Initializing Cryptographic API
[4294670.284000] isapnp: Scanning for PnP cards...
[4294670.637000] isapnp: No Plug & Play device found
[4294670.744000] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[4294670.747000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294670.747000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294670.747000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
[4294670.759000] io scheduler noop registered
[4294670.760000] io scheduler anticipatory registered
[4294670.760000] io scheduler deadline registered
[4294670.760000] io scheduler cfq registered
[4294670.762000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[4294670.763000] EISA: Probing bus 0 at eisa.0
[4294670.763000] Cannot allocate resource for EISA slot 1
[4294670.763000] EISA: Detected 0 cards.
[4294670.763000] NET: Registered protocol family 2
[4294670.773000] IP: routing cache hash table of 1024 buckets, 8Kbytes
[4294670.773000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[4294670.773000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[4294670.774000] TCP: Hash tables configured (established 8192 bind 8192)
[4294670.774000] NET: Registered protocol family 8
[4294670.774000] NET: Registered protocol family 20
[4294670.774000] ACPI wakeup devices:
[4294670.774000] PCI0  LID
[4294670.774000] ACPI: (supports S0 S1 S3 S4 S5)
[4294670.776000] Freeing unused kernel memory: 224k freed
[4294670.803000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294671.096000] vga16fb: initializing
[4294671.096000] vga16fb: mapped to 0xc00a0000
[4294671.170000] Console: switching to colour frame buffer device 80x30
[4294671.170000] fb0: VGA16 VGA frame buffer device
[4294672.338000] Capability LSM initialized
[4294672.398000] NET: Registered protocol family 1
[4294672.482000] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[4294672.482000] ACPI: Processor [CPU0] (supports 8 throttling states)
[4294672.629000] ACPI: Thermal Zone [TZ1] (53 C)
[4294673.085000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.085000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[4294673.085000] ACPI: bus type ide registered
[4294673.089000] Probing IDE interface ide0...
[4294673.473000] hda: IC25N040ATCS04-0, ATA DISK drive
[4294674.085000] Probing IDE interface ide1...
[4294674.598000] Probing IDE interface ide2...
[4294675.111000] Probing IDE interface ide3...
[4294675.624000] Probing IDE interface ide4...
[4294676.137000] Probing IDE interface ide5...
[4294676.650000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294676.677000] hda: max request size: 128KiB
[4294676.697000] hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63
[4294676.697000] hda: cache flushes not supported
[4294676.697000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
[4294677.880000] Attempting manual resume
[4294677.881000] swsusp: Suspend partition has wrong signature?
[4294677.950000] kjournald starting.  Commit interval 5 seconds
[4294677.951000] EXT3-fs: mounted filesystem with ordered data mode.
[4294690.910000] usbcore: registered new driver usbfs
[4294690.910000] usbcore: registered new driver hub
[4294691.073000] USB Universal Host Controller Interface driver v2.2
[4294691.073000] PCI: Enabling device 0000:00:07.2 (0000 -> 0001)
[4294691.074000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
[4294691.074000] PCI: setting IRQ 9 as level-triggered
[4294691.074000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 9 (level, low) -> IRQ 9
[4294691.074000] uhci_hcd 0000:00:07.2: Intel Corporation 82440MX USB Universal Host Controller[4294691.144000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
[4294691.145000] uhci_hcd 0000:00:07.2: irq 9, io base 0x000014a0
[4294691.148000] hub 1-0:1.0: USB hub found
[4294691.149000] hub 1-0:1.0: 2 ports detected
[4294691.383000] lp: driver loaded but no devices found
[4294691.732000] mice: PS/2 mouse device common for all mice
[4294692.260000] input.c: calling hotplug without a hotplug agent defined
[4294692.260000] input: PS/2 Generic Mouse on isa0060/serio1
[4294692.354000] ndiswrapper version 1.1 loaded (preempt=no,smp=no)
[4294692.981000] ndiswrapper (wrapper_init:1534): loadndiswrapper failed (1280); check system log for messages from 'loadndisdriver'
[4294693.247000] Adding 369452k swap on /dev/hda5.  Priority:-1 extents:1
[4294694.505000] EXT3 FS on hda2, internal journal
[4294695.562000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294696.653000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at redhat.com
[4294699.876000] ndiswrapper version 1.1 loaded (preempt=no,smp=no)
[4294701.445000] NET: Registered protocol family 17
[4294701.825000] Linux Kernel Card Services
[4294701.825000]   options:  [pci] [cardbus] [pm]
[4294701.847000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
[4294701.847000] ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[4294701.847000] Yenta: CardBus bridge found at 0000:00:13.0 [10cf:10c6]
[4294701.848000] Yenta: adjusting diagnostic: 41 -> 61
[4294701.848000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294701.848000] Yenta: Routing CardBus interrupts to PCI
[4294701.848000] Yenta TI: socket 0000:00:13.0, mfunc 0x01d11622, devctl 0x46
[4294702.069000] Yenta: ISA IRQ mask 0x0cb8, PCI irq 9
[4294702.069000] Socket status: 30000020
[4294703.019000] ndiswrapper: driver lstinds (Linksys,03/10/2004,6.0.0.18) loaded
[4294703.020000] PCI: Enabling device 0000:01:00.0 (0000 -> 0002)
[4294703.020000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
[4294703.021000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[4294703.709000] ndiswrapper: using irq 9
[4294704.070000] spurious 8259A interrupt: IRQ7.
[4294704.248000] wlan0: ndiswrapper ethernet device 00:14:bf:09:b8:8f using driver lstinds, configuration file 104C:9066:1737:0033.5.conf
[4294704.249000] wlan0: encryption modes supported: WEP, WPA with TKIP
[4294704.358000] cs: IO port probe 0x100-0x4ff: clean.
[4294704.360000] cs: IO port probe 0xc00-0xcf7: clean.
[4294704.360000] cs: IO port probe 0xa00-0xaff: clean.
[4294704.951000] Real Time Clock Driver v1.12
[4294705.026000] Generic RTC Driver v1.07
[4294706.664000] ACPI: AC Adapter [AC] (on-line)
[4294706.840000] ACPI: Battery Slot [CMB1] (battery present)
[4294706.916000] ACPI: Power Button (FF) [PWRF]
[4294706.916000] ACPI: Power Button (CM) [PWRB]
[4294706.916000] ACPI: Lid Switch [LID]
[4294707.305000] ibm_acpi: ec object not found
[4294707.725000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[4294726.170000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294726.170000] apm: overridden by ACPI.
[4294726.321000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294726.321000] apm: disabled on user request.
[4294733.758000] SCSI subsystem initialized
[4294739.590000] NET: Registered protocol family 10
[4294739.590000] Disabled Privacy Extensions on device c02eb280(lo)
[4294739.591000] IPv6 over IPv4 tunneling driver
[4294753.704000] wlan0: no IPv6 routers present
[4294906.313000] spurious 8259A interrupt: IRQ15.
-- 
linux-image-2.6.15 fails to boot on Lifebook B2131
https://launchpad.net/malone/bugs/37703