[Bug 15707] Kernel Panic with 386 or K7 kernel image on an AMD 64 CPU (2.6.12-8.13)

bugzilla-daemon at bugzilla.ubuntu.com bugzilla-daemon at bugzilla.ubuntu.com
Mon Sep 19 16:52:53 UTC 2005


Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=15707
Ubuntu | linux





------- Additional Comments From jcohen07 at brandeis.edu  2005-09-19 17:52 UTC -------
I wasn't sure what hardware info was pertinent so I'll paste everything: 

============ start debug info ============
libhd version 8.38u (ia32)
kernel version is 2.6
----- /proc/cmdline -----
  root=/dev/hda2 ro quiet splash
----- /proc/cmdline end -----
debug = 0xff7ffff7
probe = 0x138fe4be17fffdfffe (+memory +pci +isapnp +net +floppy +misc
+misc.serial +misc.par +misc.floppy +serial +cpu +bios +monitor +mouse +scsi
+usb -usb.mods +adb +modem +modem.usb +parallel +parallel.lp +parallel.zip +isa
+isa.isdn +isdn +kbd +prom +sbus +int +braille +braille.alva +braille.fhp
+braille.ht -ignx11 +sys -bios.vbe -isapnp.old -isapnp.new -isapnp.mod
+braille.baum +manual +fb +veth +pppoe -scan +pcmcia -fork -parallel.imm +s390
-cpuemu -sysfs +s390disks +udev +block +block.cdrom +block.part +edd +edd.mod
-bios.ddc -bios.fb -bios.mode +input +block.mods +bios.vesa -max -lxrc +dsl)
shm: attached segment 5636119 at 0xb7e5b000
>> floppy.1: get nvram
>> floppy.2: klog info
>> bios.1: cmdline
>> bios.1.1: apm
>> bios.2: ram
  bios: 0 disks
>> bios.2: rom
>> bios.3: smp
----- BIOS data 0x00400 - 0x004ff -----
  400  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  410  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  420  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  430  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  440  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  450  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  460  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  470  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  480  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  490  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4a0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4b0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4c0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4d0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4e0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  4f0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
----- BIOS data end -----
>> bios.4: vbe
VBE: Could not init Int10
>> bios.5: 32
>> sys.1: cpu
vmware check: 0
>> misc.9: kernel log
----- kernel log -----
  <6>NET: Registered protocol family 1
  <6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  <6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  <6>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
  <4>ACPI: PCI Interrupt Link [ALKA] enabled at IRQ 20
  <6>ACPI: PCI interrupt 0000:00:0f.1[A] -> GSI 20 (level, low) -> IRQ 20
  <6>VP_IDE: chipset revision 6
  <6>VP_IDE: not 100% native mode: will probe irqs later
  <6>VP_IDE: VIA vt8237 (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
  <6>    ide0: BM-DMA at 0xc800-0xc807, BIOS settings: hda:pio, hdb:pio
  <6>    ide1: BM-DMA at 0xc808-0xc80f, BIOS settings: hdc:pio, hdd:pio
  <7>Probing IDE interface ide0...
  <4>hda: ST3160023A, ATA DISK drive
  <6>elevator: using anticipatory as default io scheduler
  <4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
  <6>hda: max request size: 1024KiB
  <6>hda: 312581808 sectors (160041 MB) w/8192KiB Cache, CHS=19457/255/63, UDMA(100)
  <7>hda: cache flushes supported
  <6> /dev/ide/host0/bus0/target0/lun0: p1 p2 p3
  <7>Probing IDE interface ide1...
  <4>hdc: 16X16 DVD DUAL, ATAPI CD/DVD-ROM drive
  <4>ide1 at 0x170-0x177,0x376 on irq 15
  <7>Probing IDE interface ide2...
  <7>Probing IDE interface ide3...
  <7>Probing IDE interface ide4...
  <7>Probing IDE interface ide5...
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <6>kjournald starting.  Commit interval 5 seconds
  <6>md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
  <6>EXT3 FS on hda2, internal journal
  <4>hdc: ATAPI 126X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
  <6>Uniform CD-ROM driver Revision: 3.20
  <6>parport: PnPBIOS parport detected.
  <6>parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
  <6>lp0: using parport0 (interrupt-driven).
  <6>mice: PS/2 mouse device common for all mice
  <6>Capability LSM initialized
  <6>device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel at redhat.com
  <6>NTFS driver 2.1.22 [Flags: R/O MODULE].
  <6>NTFS volume version 3.1.
  <6>kjournald starting.  Commit interval 5 seconds
  <6>EXT3 FS on hda3, internal journal
  <6>EXT3-fs: mounted filesystem with ordered data mode.
  <6>Adding 774136k swap on /mnt/512Mb.swap.  Priority:-1 extents:199
  <6>Linux agpgart interface v0.100 (c) Dave Jones
  <6>agpgart: Detected AGP bridge 0
  <6>agpgart: Maximum main memory to use for agp memory: 439M
  <6>agpgart: AGP aperture is 128M @ 0xd0000000
  <6>cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
  <6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  <3>shpchp: shpc_init : shpc_cap_offset == 0
  <6>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  <7>Evaluate _OSC Set fails. Status = 0x0005
  <3>pciehp: add_host_bridge: status 5
  <3>pciehp: Fails to gain control of native hot-plug
  <5>SCSI subsystem initialized
  <7>libata version 1.10 loaded.
  <7>sata_via version 1.1
  <6>ACPI: PCI interrupt 0000:00:0f.0[B] -> GSI 20 (level, low) -> IRQ 20
  <6>sata_via(0000:00:0f.0): routed to hard irq line 4
  <6>ata1: SATA max UDMA/133 cmd 0xB000 ctl 0xB402 bmdma 0xC000 irq 20
  <6>ata2: SATA max UDMA/133 cmd 0xB800 ctl 0xBC02 bmdma 0xC008 irq 20
  <6>ata1: no device found (phy stat 00000000)
  <6>scsi0 : sata_via
  <6>ata2: no device found (phy stat 00000000)
  <6>scsi1 : sata_via
  <6>usbcore: registered new driver usbfs
  <6>usbcore: registered new driver hub
  <6>USB Universal Host Controller Interface driver v2.2
  <4>ACPI: PCI Interrupt Link [ALKB] enabled at IRQ 21
  <6>ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 21
  <6>uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
  <6>uhci_hcd 0000:00:10.0: irq 21, io base 0xcc00
  <6>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
  <6>hub 1-0:1.0: USB hub found
  <6>hub 1-0:1.0: 2 ports detected
  <6>ACPI: PCI interrupt 0000:00:10.1[A] -> GSI 21 (level, low) -> IRQ 21
  <6>uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#2)
  <6>uhci_hcd 0000:00:10.1: irq 21, io base 0xd000
  <6>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
  <6>hub 2-0:1.0: USB hub found
  <6>hub 2-0:1.0: 2 ports detected
  <6>ACPI: PCI interrupt 0000:00:10.2[B] -> GSI 21 (level, low) -> IRQ 21
  <6>uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#3)
  <6>uhci_hcd 0000:00:10.2: irq 21, io base 0xd400
  <6>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
  <6>hub 3-0:1.0: USB hub found
  <6>hub 3-0:1.0: 2 ports detected
  <6>ACPI: PCI interrupt 0000:00:10.3[B] -> GSI 21 (level, low) -> IRQ 21
  <6>uhci_hcd 0000:00:10.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (#4)
  <6>uhci_hcd 0000:00:10.3: irq 21, io base 0xd800
  <6>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
  <6>hub 4-0:1.0: USB hub found
  <6>hub 4-0:1.0: 2 ports detected
  <6>usb 1-2: new full speed USB device using uhci_hcd and address 2
  <6>usb 2-1: new low speed USB device using uhci_hcd and address 2
  <6>ACPI: PCI interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 21
  <6>ehci_hcd 0000:00:10.4: VIA Technologies, Inc. USB 2.0
  <6>ehci_hcd 0000:00:10.4: irq 21, pci mem 0xe8100000
  <6>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
  <6>ehci_hcd 0000:00:10.4: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
  <3>drivers/usb/class/usblp.c: can't set desired altsetting 0 on interface 0
  <4>usblp: probe of 1-2:1.0 failed with error -5
  <6>usbcore: registered new driver usblp
  <6>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
  <6>hub 5-0:1.0: USB hub found
  <6>hub 5-0:1.0: 8 ports detected
  <6>usbcore: registered new driver hiddev
  <4>usbhid: probe of 2-1:1.0 failed with error -5
  <6>usb 1-2: USB disconnect, address 2
  <6>usbcore: registered new driver usbhid
  <6>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
  <6>usb 2-1: USB disconnect, address 2
  <6>via82xx: Assuming DXS channels with 48k fixed sample rate.
  <6>         Please try dxs_support=1 or dxs_support=4 option
  <6>         and report if it works on your machine.
  <4>ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
  <6>ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 22
  <7>PCI: Setting latency timer of device 0000:00:11.5 to 64
  <6>usb 1-2: new full speed USB device using uhci_hcd and address 3
  <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt
0 proto 2 vid 0x04B8 pid 0x0005
  <6>via-rhine.c:v1.10-LK1.2.0-2.6 June-10-2004 Written by Donald Becker
  <4>ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
  <6>ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 23
  <6>eth0: VIA Rhine II at 0xe400, 00:11:5b:f4:1b:c0, IRQ 23.
  <6>eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
  <6>usb 2-1: new low speed USB device using uhci_hcd and address 3
  <6>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on
usb-0000:00:10.1-1
  <6>usb 2-2: new full speed USB device using uhci_hcd and address 4
  <6>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt
1 proto 2 vid 0x03F0 pid 0x1511
  <6>Real Time Clock Driver v1.12
  <6>input: PC Speaker
  <6>inserting floppy driver for 2.6.10-5-386
  <6>FDC 0 is a post-1991 82077
  <6>ts: Compaq touchscreen protocol output
  <6>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  <6>NET: Registered protocol family 17
  <6>ACPI: Power Button (FF) [PWRF]
  <3>ibm_acpi: ec object not found
  <6>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
  <5>apm: overridden by ACPI.
  <6>powernow-k8: Found 1 AMD Athlon 64 / Opteron processors (version 1.00.09e)
  <3>powernow-k8: BIOS error - no PSB
  <6>NET: Registered protocol family 10
  <6>Disabled Privacy Extensions on device c02f0500(lo)
  <6>IPv6 over IPv4 tunneling driver
  <6>Bluetooth: Core ver 2.7
  <6>NET: Registered protocol family 31
  <6>Bluetooth: HCI device and connection manager initialized
  <6>Bluetooth: HCI socket layer initialized
  <6>Bluetooth: L2CAP ver 2.7
  <6>Bluetooth: L2CAP socket layer initialized
  <6>Bluetooth: RFCOMM ver 1.5
  <6>Bluetooth: RFCOMM socket layer initialized
  <6>Bluetooth: RFCOMM TTY layer initialized
  <6>drivers/usb/class/usblp.c: usblp0: on fire
  <7>eth0: no IPv6 routers present
  <6>UDF-fs INFO UDF 0.9.8.1 (2004/29/09) Mounting volume 'PAY_IT_FORWARD',
timestamp 2001/01/26 20:04 (1f10)
----- kernel log end -----
>> misc.1: misc data
>> misc.1.1: open serial
>> misc.1.2: open parallel
----- exec: "/sbin/rmmod lp" -----
  ERROR: Removing 'lp': Operation not permitted
----- return code: ? -----
----- exec: "/sbin/rmmod parport_pc" -----
  ERROR: Module parport_pc is in use
----- return code: ? -----
----- exec: "/sbin/rmmod parport" -----
  ERROR: Module parport is in use by parport_pc,lp
----- return code: ? -----
>> misc.2.1: io
>> misc.2.2: dma
>> misc.2.3: irq
----- /proc/ioports -----
  0000-001f : dma1
  0020-0021 : pic1
  0040-0043 : timer0
  0050-0053 : timer1
  0060-006f : keyboard
  0070-0077 : rtc
  0080-008f : dma page reg
  00a0-00a1 : pic2
  00c0-00df : dma2
  00f0-00ff : fpu
  0170-0177 : ide1
  01f0-01f7 : ide0
  0376-0376 : ide1
  0378-037a : parport0
  03c0-03df : vga+
  03f6-03f6 : ide0
  03f8-03ff : serial
  0778-077a : parport0
  0cf8-0cff : PCI conf1
  4000-407f : motherboard
    4000-4003 : PM1a_EVT_BLK
    4004-4005 : PM1a_CNT_BLK
    4008-400b : PM_TMR
    4020-4023 : GPE0_BLK
  5000-500f : motherboard
    5000-500f : pnp 00:01
      5000-5007 : viapro-smbus
  a000-afff : PCI Bus #01
    a000-a0ff : 0000:01:00.0
  b000-b007 : 0000:00:0f.0
    b000-b007 : sata_via
  b400-b403 : 0000:00:0f.0
    b400-b403 : sata_via
  b800-b807 : 0000:00:0f.0
    b800-b807 : sata_via
  bc00-bc03 : 0000:00:0f.0
    bc00-bc03 : sata_via
  c000-c00f : 0000:00:0f.0
    c000-c00f : sata_via
  c400-c4ff : 0000:00:0f.0
    c400-c4ff : sata_via
  c800-c80f : 0000:00:0f.1
    c800-c807 : ide0
    c808-c80f : ide1
  cc00-cc1f : 0000:00:10.0
    cc00-cc1f : uhci_hcd
  d000-d01f : 0000:00:10.1
    d000-d01f : uhci_hcd
  d400-d41f : 0000:00:10.2
    d400-d41f : uhci_hcd
  d800-d81f : 0000:00:10.3
    d800-d81f : uhci_hcd
  dc00-dcff : 0000:00:11.5
    dc00-dcff : VIA8237
  e400-e4ff : 0000:00:12.0
    e400-e4ff : via-rhine
----- /proc/ioports end -----
----- /proc/interrupts -----
    0:     192438    IO-APIC-edge  timer
    1:        405    IO-APIC-edge  i8042
    4:          1    IO-APIC-edge  serial
    7:          2    IO-APIC-edge  parport0
    8:          1    IO-APIC-edge  rtc
    9:          0   IO-APIC-level  acpi
   14:      13812    IO-APIC-edge  ide0
   15:        503    IO-APIC-edge  ide1
   20:          0   IO-APIC-level  libata
   21:      20655   IO-APIC-level  uhci_hcd, uhci_hcd, uhci_hcd, uhci_hcd, ehci_hcd
   22:       2847   IO-APIC-level  VIA8237
   23:       1653   IO-APIC-level  eth0
  NMI:          0 
  LOC:     192312 
  ERR:          0
  MIS:          0
----- /proc/interrupts end -----
----- /proc/dma -----
   3: parport0
   4: cascade
----- /proc/dma end -----
>> misc.3: FPU
>> misc.3.1: DMA
>> misc.3.2: PIC
>> misc.3.3: timer
>> misc.3.4: RTC
>> cpu.1: cpuinfo
----- /proc/cpuinfo -----
  processor	: 0
  vendor_id	: AuthenticAMD
  cpu family	: 15
  model		: 12
  model name	: AMD Athlon(tm) 64 Processor 3000+
  stepping	: 0
  cpu MHz		: 2000.067
  cache size	: 512 KB
  fdiv_bug	: no
  hlt_bug		: no
  f00f_bug	: no
  coma_bug	: no
  fpu		: yes
  fpu_exception	: yes
  cpuid level	: 1
  wp		: yes
  flags		: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 clflush mmx fxsr sse sse2 pni syscall nx mmxext lm 3dnowext 3dnow
  bogomips	: 3956.73
  
----- /proc/cpuinfo end -----
>> memory.1: main memory size
  kcore mem:  0x1fff0000
  klog mem 0: 0x0
  klog mem 1: 0x0
  klog mem:   0x0
  bios mem:   0x0
  meminfo:    0x0
>> pci.1: sysfs drivers
----- sysfs driver list (id 0xf69bb86978405089) -----
  VIA 82xx Audio: /devices/pci0000:00/0000:00:11.5
         VIA_IDE: /devices/pci0000:00/0000:00:0f.1
   agpgart-amd64: /devices/pci0000:00/0000:00:00.0
        ehci_hcd: /devices/pci0000:00/0000:00:10.4
        sata_via: /devices/pci0000:00/0000:00:0f.0
        uhci_hcd: /devices/pci0000:00/0000:00:10.0
        uhci_hcd: /devices/pci0000:00/0000:00:10.1
        uhci_hcd: /devices/pci0000:00/0000:00:10.2
        uhci_hcd: /devices/pci0000:00/0000:00:10.3
       via-rhine: /devices/pci0000:00/0000:00:12.0
     vt596_smbus: /devices/pci0000:00/0000:00:11.0
           i8042: /devices/platform/i8042
      serial8250: /devices/platform/serial8250
      parport_pc: /devices/pnp0/00:09
          serial: /devices/pnp0/00:08
          system: /devices/pnp0/00:00
          system: /devices/pnp0/00:01
          system: /devices/pnp0/00:02
           atkbd: /devices/platform/i8042/serio1
          hiddev: /module/usbhid
             hub: /devices/pci0000:00/0000:00:10.0/usb1/1-0:1.0
             hub: /devices/pci0000:00/0000:00:10.1/usb2/2-0:1.0
             hub: /devices/pci0000:00/0000:00:10.2/usb3/3-0:1.0
             hub: /devices/pci0000:00/0000:00:10.3/usb4/4-0:1.0
             hub: /devices/pci0000:00/0000:00:10.4/usb5/5-0:1.0
             hub: /module/usbcore
           usbfs: /module/usbcore
          usbhid: /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0
          usbhid: /module/usbhid
           usblp: /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0
           usblp: /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0
           usblp: /module/usblp
             usb: /devices/pci0000:00/0000:00:10.0/usb1/1-2
             usb: /devices/pci0000:00/0000:00:10.1/usb2/2-1
             usb: /devices/pci0000:00/0000:00:10.1/usb2/2-2
             usb: /devices/pci0000:00/0000:00:10.0/usb1
             usb: /devices/pci0000:00/0000:00:10.1/usb2
             usb: /devices/pci0000:00/0000:00:10.2/usb3
             usb: /devices/pci0000:00/0000:00:10.3/usb4
             usb: /devices/pci0000:00/0000:00:10.4/usb5
             usb: /module/usbcore
----- sysfs driver list end -----
>> pci.2: get sysfs pci data
  pci device: name = 0000:00:00.0, bus_id = 0000:00:00.0, bus = pci
    path = /devices/pci0000:00/0000:00:00.0
    class = 0x60000
    vendor = 0x1106
    device = 0x204
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 0
    res[0] = 0xd0000000 0xd7ffffff 0x1208
    config[64]
  pci device: name = 0000:00:00.1, bus_id = 0000:00:00.1, bus = pci
    path = /devices/pci0000:00/0000:00:00.1
    class = 0x60000
    vendor = 0x1106
    device = 0x1204
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:00.2, bus_id = 0000:00:00.2, bus = pci
    path = /devices/pci0000:00/0000:00:00.2
    class = 0x60000
    vendor = 0x1106
    device = 0x2204
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:00.3, bus_id = 0000:00:00.3, bus = pci
    path = /devices/pci0000:00/0000:00:00.3
    class = 0x60000
    vendor = 0x1106
    device = 0x3204
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:00.4, bus_id = 0000:00:00.4, bus = pci
    path = /devices/pci0000:00/0000:00:00.4
    class = 0x60000
    vendor = 0x1106
    device = 0x4204
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:00.7, bus_id = 0000:00:00.7, bus = pci
    path = /devices/pci0000:00/0000:00:00.7
    class = 0x60000
    vendor = 0x1106
    device = 0x7204
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:01.0, bus_id = 0000:00:01.0, bus = pci
    path = /devices/pci0000:00/0000:00:01.0
    class = 0x60400
    vendor = 0x1106
    device = 0xb188
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:0f.0, bus_id = 0000:00:0f.0, bus = pci
    path = /devices/pci0000:00/0000:00:0f.0
    class = 0x1018f
    vendor = 0x1106
    device = 0x3149
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 20
    res[0] = 0xb000 0xb007 0x101
    res[1] = 0xb400 0xb403 0x101
    res[2] = 0xb800 0xb807 0x101
    res[3] = 0xbc00 0xbc03 0x101
    res[4] = 0xc000 0xc00f 0x101
    res[5] = 0xc400 0xc4ff 0x101
    config[64]
  pci device: name = 0000:00:0f.1, bus_id = 0000:00:0f.1, bus = pci
    path = /devices/pci0000:00/0000:00:0f.1
    class = 0x1018a
    vendor = 0x1106
    device = 0x571
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 20
    res[4] = 0xc800 0xc80f 0x101
    config[64]
  pci device: name = 0000:00:10.0, bus_id = 0000:00:10.0, bus = pci
    path = /devices/pci0000:00/0000:00:10.0
    class = 0xc0300
    vendor = 0x1106
    device = 0x3038
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 21
    res[4] = 0xcc00 0xcc1f 0x101
    config[64]
  pci device: name = 0000:00:10.1, bus_id = 0000:00:10.1, bus = pci
    path = /devices/pci0000:00/0000:00:10.1
    class = 0xc0300
    vendor = 0x1106
    device = 0x3038
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 21
    res[4] = 0xd000 0xd01f 0x101
    config[64]
  pci device: name = 0000:00:10.2, bus_id = 0000:00:10.2, bus = pci
    path = /devices/pci0000:00/0000:00:10.2
    class = 0xc0300
    vendor = 0x1106
    device = 0x3038
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 21
    res[4] = 0xd400 0xd41f 0x101
    config[64]
  pci device: name = 0000:00:10.3, bus_id = 0000:00:10.3, bus = pci
    path = /devices/pci0000:00/0000:00:10.3
    class = 0xc0300
    vendor = 0x1106
    device = 0x3038
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 21
    res[4] = 0xd800 0xd81f 0x101
    config[64]
  pci device: name = 0000:00:10.4, bus_id = 0000:00:10.4, bus = pci
    path = /devices/pci0000:00/0000:00:10.4
    class = 0xc0320
    vendor = 0x1106
    device = 0x3104
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 21
    res[0] = 0xe8100000 0xe81000ff 0x200
    config[64]
  pci device: name = 0000:00:11.0, bus_id = 0000:00:11.0, bus = pci
    path = /devices/pci0000:00/0000:00:11.0
    class = 0x60100
    vendor = 0x1106
    device = 0x3227
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 0
    config[64]
  pci device: name = 0000:00:11.5, bus_id = 0000:00:11.5, bus = pci
    path = /devices/pci0000:00/0000:00:11.5
    class = 0x40100
    vendor = 0x1106
    device = 0x3059
    subvendor = 0x1019
    subdevice = 0x1828
    irq = 22
    res[0] = 0xdc00 0xdcff 0x101
    config[64]
  pci device: name = 0000:00:12.0, bus_id = 0000:00:12.0, bus = pci
    path = /devices/pci0000:00/0000:00:12.0
    class = 0x20000
    vendor = 0x1106
    device = 0x3065
    subvendor = 0x1106
    subdevice = 0x102
    irq = 23
    res[0] = 0xe400 0xe4ff 0x101
    res[1] = 0xe8101000 0xe81010ff 0x200
    config[64]
  pci device: name = 0000:00:18.0, bus_id = 0000:00:18.0, bus = pci
    path = /devices/pci0000:00/0000:00:18.0
    class = 0x60000
    vendor = 0x1022
    device = 0x1100
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:18.1, bus_id = 0000:00:18.1, bus = pci
    path = /devices/pci0000:00/0000:00:18.1
    class = 0x60000
    vendor = 0x1022
    device = 0x1101
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:18.2, bus_id = 0000:00:18.2, bus = pci
    path = /devices/pci0000:00/0000:00:18.2
    class = 0x60000
    vendor = 0x1022
    device = 0x1102
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:00:18.3, bus_id = 0000:00:18.3, bus = pci
    path = /devices/pci0000:00/0000:00:18.3
    class = 0x60000
    vendor = 0x1022
    device = 0x1103
    subvendor = 0x0
    subdevice = 0x0
    irq = 0
    config[64]
  pci device: name = 0000:01:00.0, bus_id = 0000:01:00.0, bus = pci
    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.0
    class = 0x30000
    vendor = 0x1002
    device = 0x4e44
    subvendor = 0x1002
    subdevice = 0x2
    irq = 10
    res[0] = 0xd8000000 0xdfffffff 0x1208
    res[1] = 0xa000 0xa0ff 0x101
    res[2] = 0xe8030000 0xe803ffff 0x200
    res[6] = 0x0 0x1ffff 0x7202
    config[64]
  pci device: name = 0000:01:00.1, bus_id = 0000:01:00.1, bus = pci
    path = /devices/pci0000:00/0000:00:01.0/0000:01:00.1
    class = 0x38000
    vendor = 0x1002
    device = 0x4e64
    subvendor = 0x1002
    subdevice = 0x3
    irq = 0
    res[0] = 0xe0000000 0xe7ffffff 0x1208
    res[1] = 0xe8020000 0xe802ffff 0x200
    config[64]
---------- PCI raw data ----------
bus 00, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1106:0204:1019:1828:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  addr0 d0000000, size 08000000
  00: 06 11 04 02 06 00 30 22 00 00 00 06 00 08 80 00  "......0"........"
  10: 08 00 00 d0 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 1, vend:dev:s_vend:s_dev:rev 1106:1204:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 06 11 04 12 06 00 00 02 00 00 00 06 00 00 00 00  "................"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 2, vend:dev:s_vend:s_dev:rev 1106:2204:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 06 11 04 22 06 00 00 02 00 00 00 06 00 00 00 00  "..."............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 3, vend:dev:s_vend:s_dev:rev 1106:3204:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 06 11 04 32 06 00 00 02 00 00 00 06 00 00 00 00  "...2............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 4, vend:dev:s_vend:s_dev:rev 1106:4204:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 06 11 04 42 06 00 00 02 00 00 00 06 00 00 00 00  "...B............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 00, func 7, vend:dev:s_vend:s_dev:rev 1106:7204:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 06 11 04 72 06 00 00 02 00 00 00 06 00 00 00 00  "...r............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 a0 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00->01, slot 01, func 0, vend:dev:s_vend:s_dev:rev 1106:b188:0000:0000:00
class 06, sub_class 04 prog_if 00, hdr 1, flags <>, irq 0
  00: 06 11 88 b1 07 01 30 02 00 00 04 06 00 00 01 00  "......0........."
  10: 00 00 00 00 00 00 00 00 00 01 01 00 a0 a0 20 22  ".............. ""
  20: 00 e8 00 e8 00 d8 f0 e7 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 0e 00  "................"

bus 00, slot 0f, func 0, vend:dev:s_vend:s_dev:rev 1106:3149:1019:1828:80
class 01, sub_class 01 prog_if 8f, hdr 0, flags <>, irq 20
  addr0 0000b000, size 00000008
  addr1 0000b400, size 00000004
  addr2 0000b800, size 00000008
  addr3 0000bc00, size 00000004
  addr4 0000c000, size 00000010
  addr5 0000c400, size 00000100
  00: 06 11 49 31 07 00 90 02 80 8f 01 01 00 20 80 00  "..I1......... .."
  10: 01 b0 00 00 01 b4 00 00 01 b8 00 00 01 bc 00 00  "................"
  20: 01 c0 00 00 01 c4 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 c0 00 00 00 00 00 00 00 04 02 00 00  "................"

bus 00, slot 0f, func 1, vend:dev:s_vend:s_dev:rev 1106:0571:1019:1828:06
class 01, sub_class 01 prog_if 8a, hdr 0, flags <>, irq 20
  addr4 0000c800, size 00000010
  00: 06 11 71 05 07 00 90 02 06 8a 01 01 00 20 00 00  "..q.......... .."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 01 c8 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 c0 00 00 00 00 00 00 00 ff 01 00 00  "................"

bus 00, slot 10, func 0, vend:dev:s_vend:s_dev:rev 1106:3038:1019:1828:81
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 21
  addr4 0000cc00, size 00000020
  00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00  "..80......... .."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 01 cc 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00  "................"

bus 00, slot 10, func 1, vend:dev:s_vend:s_dev:rev 1106:3038:1019:1828:81
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 21
  addr4 0000d000, size 00000020
  00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00  "..80......... .."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 01 d0 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 01 00 00  "................"

bus 00, slot 10, func 2, vend:dev:s_vend:s_dev:rev 1106:3038:1019:1828:81
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 21
  addr4 0000d400, size 00000020
  00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00  "..80......... .."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 01 d4 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00  "................"

bus 00, slot 10, func 3, vend:dev:s_vend:s_dev:rev 1106:3038:1019:1828:81
class 0c, sub_class 03 prog_if 00, hdr 0, flags <>, irq 21
  addr4 0000d800, size 00000020
  00: 06 11 38 30 07 00 10 02 81 00 03 0c 08 20 80 00  "..80......... .."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 01 d8 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 02 00 00  "................"

bus 00, slot 10, func 4, vend:dev:s_vend:s_dev:rev 1106:3104:1019:1828:86
class 0c, sub_class 03 prog_if 20, hdr 0, flags <>, irq 21
  addr0 e8100000, size 00000100
  00: 06 11 04 31 17 00 10 02 86 20 03 0c 10 20 80 00  "...1..... ... .."
  10: 00 00 10 e8 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 80 00 00 00 00 00 00 00 05 03 00 00  "................"

bus 00, slot 11, func 0, vend:dev:s_vend:s_dev:rev 1106:3227:1019:1828:00
class 06, sub_class 01 prog_if 00, hdr 0, flags <>, irq 0
  00: 06 11 27 32 87 00 10 02 00 00 01 06 00 00 80 00  "..'2............"
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 c0 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 11, func 5, vend:dev:s_vend:s_dev:rev 1106:3059:1019:1828:60
class 04, sub_class 01 prog_if 00, hdr 0, flags <>, irq 22
  addr0 0000dc00, size 00000100
  00: 06 11 59 30 01 00 10 02 60 00 01 04 00 00 00 00  "..Y0....`......."
  10: 01 dc 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 19 10 28 18  "..............(."
  30: 00 00 00 00 c0 00 00 00 00 00 00 00 06 03 00 00  "................"

bus 00, slot 12, func 0, vend:dev:s_vend:s_dev:rev 1106:3065:1106:0102:78
class 02, sub_class 00 prog_if 00, hdr 0, flags <>, irq 23
  addr0 0000e400, size 00000100
  addr1 e8101000, size 00000100
  00: 06 11 65 30 07 00 10 02 78 00 00 02 08 20 00 00  "..e0....x.... .."
  10: 01 e4 00 00 00 10 10 e8 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 06 11 02 01  "................"
  30: 00 00 00 00 40 00 00 00 00 00 00 00 07 01 03 08  ".... at ..........."

bus 00, slot 18, func 0, vend:dev:s_vend:s_dev:rev 1022:1100:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 22 10 00 11 00 00 10 00 00 00 00 06 00 00 80 00  ""..............."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 18, func 1, vend:dev:s_vend:s_dev:rev 1022:1101:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 22 10 01 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 18, func 2, vend:dev:s_vend:s_dev:rev 1022:1102:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 22 10 02 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 00, slot 18, func 3, vend:dev:s_vend:s_dev:rev 1022:1103:0000:0000:00
class 06, sub_class 00 prog_if 00, hdr 0, flags <>, irq 0
  00: 22 10 03 11 00 00 00 00 00 00 00 06 00 00 80 00  ""..............."
  10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"
  30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  "................"

bus 01, slot 00, func 0, vend:dev:s_vend:s_dev:rev 1002:4e44:1002:0002:00
class 03, sub_class 00 prog_if 00, hdr 0, flags <>, irq 10
  addr0 d8000000, size 08000000
  addr1 0000a000, size 00000100
  addr2 e8030000, size 00010000
  00: 02 10 44 4e 87 00 b0 02 00 00 00 03 08 20 80 00  "..DN......... .."
  10: 08 00 00 d8 01 a0 00 00 00 00 03 e8 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 02 00  "................"
  30: 00 00 00 00 58 00 00 00 00 00 00 00 0a 01 08 00  "....X..........."

bus 01, slot 00, func 1, vend:dev:s_vend:s_dev:rev 1002:4e64:1002:0003:00
class 03, sub_class 80 prog_if 00, hdr 0, flags <>, irq 0
  addr0 e0000000, size 08000000
  addr1 e8020000, size 00010000
  00: 02 10 64 4e 80 00 b0 02 00 00 80 03 08 20 00 00  "..dN......... .."
  10: 08 00 00 e0 00 00 02 e8 00 00 00 00 00 00 00 00  "................"
  20: 00 00 00 00 00 00 00 00 00 00 00 00 02 10 03 00  "................"
  30: 00 00 00 00 50 00 00 00 00 00 00 00 ff 00 08 00  "....P..........."
---------- PCI raw data end ----------
>> pci.4: build list
>> monitor.1: ddc
>> isapnp.1: pnp devices
  pnp device: name = 00:00, bus_id = 00:00, bus = pnp
    path = /devices/pnp0/00:00
    id = PNP 0c01
  pnp device: name = 00:01, bus_id = 00:01, bus = pnp
    path = /devices/pnp0/00:01
    id = PNP 0c02
  pnp device: name = 00:02, bus_id = 00:02, bus = pnp
    path = /devices/pnp0/00:02
    id = PNP 0c02
  pnp device: name = 00:03, bus_id = 00:03, bus = pnp
    path = /devices/pnp0/00:03
    id = PNP 0200
  pnp device: name = 00:04, bus_id = 00:04, bus = pnp
    path = /devices/pnp0/00:04
    id = PNP 0b00
  pnp device: name = 00:05, bus_id = 00:05, bus = pnp
    path = /devices/pnp0/00:05
    id = PNP 0800
  pnp device: name = 00:06, bus_id = 00:06, bus = pnp
    path = /devices/pnp0/00:06
    id = PNP 0c04
  pnp device: name = 00:07, bus_id = 00:07, bus = pnp
    path = /devices/pnp0/00:07
    id = PNP 0700
  pnp device: name = 00:08, bus_id = 00:08, bus = pnp
    path = /devices/pnp0/00:08
    id = PNP 0501
  pnp device: name = 00:09, bus_id = 00:09, bus = pnp
    path = /devices/pnp0/00:09
    id = PNP 0401
  pnp device: name = 00:0a, bus_id = 00:0a, bus = pnp
    path = /devices/pnp0/00:0a
    id = PNP 0303
>> isa.1: isdn
---------- ISA ISDN raw data ----------
---------- ISA ISDN raw data end ----------
>> isa.1.1: isdn
-----  cardctl status -----
-----  cardctl status end -----
-----  cardctl ident -----
-----  cardctl ident end -----
>> serial.1: read info
----- serial info -----
----- serial info end -----
>> serial.2: build list
>> misc.5: misc data
----- misc resources -----
i/o:1 0x0000 - 0x001f (0x20) "dma1"
i/o:1 0x0020 - 0x0021 (0x02) "pic1"
i/o:0 0x0040 - 0x0043 (0x04) "timer0"
i/o:0 0x0050 - 0x0053 (0x04) "timer1"
i/o:1 0x0060 - 0x006f (0x10) "keyboard"
i/o:1 0x0070 - 0x0077 (0x08) "rtc"
i/o:1 0x0080 - 0x008f (0x10) "dma page reg"
i/o:1 0x00a0 - 0x00a1 (0x02) "pic2"
i/o:1 0x00c0 - 0x00df (0x20) "dma2"
i/o:1 0x00f0 - 0x00ff (0x10) "fpu"
i/o:1 0x0170 - 0x0177 (0x08) "ide1"
i/o:1 0x01f0 - 0x01f7 (0x08) "ide0"
i/o:1 0x0376 - 0x0376 (0x01) "ide1"
i/o:1 0x0378 - 0x037a (0x03) "parport0"
i/o:1 0x03c0 - 0x03df (0x20) "vga+"
i/o:1 0x03f6 - 0x03f6 (0x01) "ide0"
i/o:1 0x03f8 - 0x03ff (0x08) "serial"
i/o:1 0x0778 - 0x077a (0x03) "parport0"
i/o:0 0x0cf8 - 0x0cff (0x08) "PCI conf1"
i/o:0 0x4000 - 0x407f (0x80) "motherboard"
i/o:0 0x4000 - 0x4003 (0x04) "PM1a_EVT_BLK"
i/o:0 0x4004 - 0x4005 (0x02) "PM1a_CNT_BLK"
i/o:0 0x4008 - 0x400b (0x04) "PM_TMR"
i/o:0 0x4020 - 0x4023 (0x04) "GPE0_BLK"
i/o:0 0x5000 - 0x500f (0x10) "motherboard"
i/o:0 0x5000 - 0x500f (0x10) "pnp 00:01"
i/o:0 0x5000 - 0x5007 (0x08) "viapro-smbus"
i/o:0 0xa000 - 0xafff (0x1000) "PCI Bus #01"
i/o:0 0xa000 - 0xa0ff (0x100) "0000:01:00.0"
i/o:0 0xb000 - 0xb007 (0x08) "0000:00:0f.0"
i/o:0 0xb000 - 0xb007 (0x08) "sata_via"
i/o:0 0xb400 - 0xb403 (0x04) "0000:00:0f.0"
i/o:0 0xb400 - 0xb403 (0x04) "sata_via"
i/o:0 0xb800 - 0xb807 (0x08) "0000:00:0f.0"
i/o:0 0xb800 - 0xb807 (0x08) "sata_via"
i/o:0 0xbc00 - 0xbc03 (0x04) "0000:00:0f.0"
i/o:0 0xbc00 - 0xbc03 (0x04) "sata_via"
i/o:0 0xc000 - 0xc00f (0x10) "0000:00:0f.0"
i/o:0 0xc000 - 0xc00f (0x10) "sata_via"
i/o:0 0xc400 - 0xc4ff (0x100) "0000:00:0f.0"
i/o:0 0xc400 - 0xc4ff (0x100) "sata_via"
i/o:0 0xc800 - 0xc80f (0x10) "0000:00:0f.1"
i/o:1 0xc800 - 0xc807 (0x08) "ide0"
i/o:1 0xc808 - 0xc80f (0x08) "ide1"
i/o:0 0xcc00 - 0xcc1f (0x20) "0000:00:10.0"
i/o:0 0xcc00 - 0xcc1f (0x20) "uhci_hcd"
i/o:0 0xd000 - 0xd01f (0x20) "0000:00:10.1"
i/o:0 0xd000 - 0xd01f (0x20) "uhci_hcd"
i/o:0 0xd400 - 0xd41f (0x20) "0000:00:10.2"
i/o:0 0xd400 - 0xd41f (0x20) "uhci_hcd"
i/o:0 0xd800 - 0xd81f (0x20) "0000:00:10.3"
i/o:0 0xd800 - 0xd81f (0x20) "uhci_hcd"
i/o:0 0xdc00 - 0xdcff (0x100) "0000:00:11.5"
i/o:0 0xdc00 - 0xdcff (0x100) "VIA8237"
i/o:0 0xe400 - 0xe4ff (0x100) "0000:00:12.0"
i/o:0 0xe400 - 0xe4ff (0x100) "via-rhine"
irq:1  0 (   192438) "timer"
irq:0  1 (      405) "i8042"
irq:1  4 (        1) "serial"
irq:1  7 (        2) "parport0"
irq:1  8 (        1) "rtc"
irq:0  9 (        0) "acpi"
irq:1 14 (    13812) "ide0"
irq:1 15 (      503) "ide1"
irq:0 20 (        0) "libata"
irq:0 21 (    20655) "uhci_hcd" "uhci_hcd" "uhci_hcd" "uhci_hcd" "ehci_hcd"
irq:0 22 (     2847) "VIA8237"
irq:0 23 (     1653) "eth0"
dma:1 3 "parport0"
dma:1 4 "cascade"
----- misc resources end -----
>> parallel.1: pp mod
----- exec: "/sbin/rmmod lp" -----
  ERROR: Removing 'lp': Operation not permitted
----- return code: ? -----
----- exec: "/sbin/rmmod parport_pc" -----
  ERROR: Module parport_pc is in use
----- return code: ? -----
>> parallel.2.1: lp read info
>> parallel.2.2: lp read info
>> parallel.2.3: lp read info
----- parallel info -----
/proc/sys/dev/parport/parport0/base-addr
  888	1912
/proc/sys/dev/parport/parport0/autoprobe
----- parallel info end -----
>> parallel.5: ppa mod
----- exec: "/sbin/modprobe ppa " -----
  FATAL: Error inserting ppa
(/lib/modules/2.6.10-5-386/kernel/drivers/scsi/ppa.ko): Operation not permitted
----- return code: ? -----
>> block.1: block modules
----- exec: "/sbin/modprobe sr_mod " -----
  FATAL: Error inserting sr_mod
(/lib/modules/2.6.10-5-386/kernel/drivers/scsi/sr_mod.ko): Operation not permitted
----- return code: ? -----
----- exec: "/sbin/modprobe sd_mod " -----
  FATAL: Error inserting sd_mod
(/lib/modules/2.6.10-5-386/kernel/drivers/scsi/sd_mod.ko): Operation not permitted
----- return code: ? -----
----- exec: "/sbin/modprobe st " -----
  FATAL: Error inserting st
(/lib/modules/2.6.10-5-386/kernel/drivers/scsi/st.ko): Operation not permitted
----- return code: ? -----
>> block.2: sysfs drivers
>> block.3: cdrom
----- /proc/sys/dev/cdrom/info -----
drive name:		hdc
drive speed:		63
drive # of slots:	1
Can close tray:		1
Can open tray:		1
Can lock tray:		1
Can change speed:	1
Can select disk:	0
Can read multisession:	1
Can read MCN:		1
Reports media changed:	1
Can play audio:		1
Can write CD-R:		1
Can write CD-RW:	1
Can read DVD:		1
Can write DVD-R:	1
Can write DVD-RAM:	0
Can read MRW:		0
Can write MRW:		0
Can write RAM:		1
----- /proc/sys/dev/cdrom/info end -----
>> block.4: partition
----- /proc/partitions -----
     3     0  156290904 hda
     3     1   81923436 hda1
     3     2   29294527 hda2
     3     3   45070357 hda3
   253     0   81923436 dm-0
   253     1   29294527 dm-1
   253     2   45070357 dm-2
----- /proc/partitions end -----
disks:
  hda
partitions:
  hda1
  hda2
  hda3
>> block.5: get sysfs block dev data
  ide: bus_id = 0.0 path = /devices/pci0000:00/0000:00:0f.1/ide0/0.0
  ide: bus_id = 1.0 path = /devices/pci0000:00/0000:00:0f.1/ide1/1.0
  block: name = dm-0, path = /block/dm-0
    dev = 253:0
    range = 1
  block: name = dm-1, path = /block/dm-1
    dev = 253:1
    range = 1
  block: name = dm-2, path = /block/dm-2
    dev = 253:2
    range = 1
  block: name = hda, path = /block/hda
    dev = 3:0
    range = 64
    block device: bus = ide, bus_id = 0.0 driver = unknown
      path = /devices/pci0000:00/0000:00:0f.1/ide0/0.0
  block: name = hdc, path = /block/hdc
    dev = 22:0
    range = 1
    block device: bus = ide, bus_id = 1.0 driver = unknown
      path = /devices/pci0000:00/0000:00:0f.1/ide1/1.0
  block: name = ram0, path = /block/ram0
    dev = 1:0
    range = 1
  block: name = ram10, path = /block/ram10
    dev = 1:10
    range = 1
  block: name = ram11, path = /block/ram11
    dev = 1:11
    range = 1
  block: name = ram12, path = /block/ram12
    dev = 1:12
    range = 1
  block: name = ram13, path = /block/ram13
    dev = 1:13
    range = 1
  block: name = ram14, path = /block/ram14
    dev = 1:14
    range = 1
  block: name = ram15, path = /block/ram15
    dev = 1:15
    range = 1
  block: name = ram1, path = /block/ram1
    dev = 1:1
    range = 1
  block: name = ram2, path = /block/ram2
    dev = 1:2
    range = 1
  block: name = ram3, path = /block/ram3
    dev = 1:3
    range = 1
  block: name = ram4, path = /block/ram4
    dev = 1:4
    range = 1
  block: name = ram5, path = /block/ram5
    dev = 1:5
    range = 1
  block: name = ram6, path = /block/ram6
    dev = 1:6
    range = 1
  block: name = ram7, path = /block/ram7
    dev = 1:7
    range = 1
  block: name = ram8, path = /block/ram8
    dev = 1:8
    range = 1
  block: name = ram9, path = /block/ram9
    dev = 1:9
    range = 1
>> scsi.1: scsi tape
sysfs: no such class: scsi_tape
>> scsi.2: scsi generic
sysfs: no such class: scsi_generic
>> usb.1: sysfs drivers
>> usb.2: usb
  usb dev: /devices/pci0000:00/0000:00:10.0/usb1/1-2
  usb dev: /devices/pci0000:00/0000:00:10.1/usb2/2-1
  usb dev: /devices/pci0000:00/0000:00:10.1/usb2/2-2
  usb dev: /devices/pci0000:00/0000:00:10.0/usb1
  usb dev: /devices/pci0000:00/0000:00:10.1/usb2
  usb dev: /devices/pci0000:00/0000:00:10.2/usb3
  usb dev: /devices/pci0000:00/0000:00:10.3/usb4
  usb dev: /devices/pci0000:00/0000:00:10.4/usb5
  usb device: name = 1-0:1.0, bus_id = 1-0:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.0/usb1/1-0:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 1-0:1.0 @ /devices/pci0000:00/0000:00:10.0/usb1
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x0000
    idProduct = 0x0000
    manufacturer = "Linux 2.6.10-5-386 uhci_hcd"
    product = "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller"
    serial = "0000:00:10.0"
    bcdDevice = 0206
    speed = "12"
  usb device: name = 1-2:1.0, bus_id = 1-2:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 7
    bInterfaceSubClass = 1
    bInterfaceProtocol = 2
    if: 1-2:1.0 @ /devices/pci0000:00/0000:00:10.0/usb1/1-2
    bDeviceClass = 0
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x04b8
    idProduct = 0x0005
    manufacturer = "EPSON"
    product = "USB Printer"
    serial = "3P3DH0103082222100"
    bcdDevice = 0100
    speed = "12"
  usb device: name = 1-2, bus_id = 1-2, bus = usb
    path = /devices/pci0000:00/0000:00:10.0/usb1/1-2
  usb device: name = 2-0:1.0, bus_id = 2-0:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.1/usb2/2-0:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 2-0:1.0 @ /devices/pci0000:00/0000:00:10.1/usb2
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x0000
    idProduct = 0x0000
    manufacturer = "Linux 2.6.10-5-386 uhci_hcd"
    product = "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)"
    serial = "0000:00:10.1"
    bcdDevice = 0206
    speed = "12"
  usb device: name = 2-1:1.0, bus_id = 2-1:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 3
    bInterfaceSubClass = 1
    bInterfaceProtocol = 2
    if: 2-1:1.0 @ /devices/pci0000:00/0000:00:10.1/usb2/2-1
    bDeviceClass = 0
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x046d
    idProduct = 0xc00e
    manufacturer = "Logitech"
    product = "USB-PS/2 Optical Mouse"
    bcdDevice = 1110
    speed = "1.5"
  usb device: name = 2-1, bus_id = 2-1, bus = usb
    path = /devices/pci0000:00/0000:00:10.1/usb2/2-1
  usb device: name = 2-2:1.0, bus_id = 2-2:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 7
    bInterfaceSubClass = 1
    bInterfaceProtocol = 3
    if: 2-2:1.0 @ /devices/pci0000:00/0000:00:10.1/usb2/2-2
    bDeviceClass = 0
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x03f0
    idProduct = 0x1511
    manufacturer = "Hewlett-Packard"
    product = "PSC 750xi"
    serial = "MY27ND40FSWB"
    bcdDevice = 0100
    speed = "12"
  usb device: name = 2-2, bus_id = 2-2, bus = usb
    path = /devices/pci0000:00/0000:00:10.1/usb2/2-2
  usb device: name = 3-0:1.0, bus_id = 3-0:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.2/usb3/3-0:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 3-0:1.0 @ /devices/pci0000:00/0000:00:10.2/usb3
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x0000
    idProduct = 0x0000
    manufacturer = "Linux 2.6.10-5-386 uhci_hcd"
    product = "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)"
    serial = "0000:00:10.2"
    bcdDevice = 0206
    speed = "12"
  usb device: name = 4-0:1.0, bus_id = 4-0:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.3/usb4/4-0:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 4-0:1.0 @ /devices/pci0000:00/0000:00:10.3/usb4
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 0
    idVendor = 0x0000
    idProduct = 0x0000
    manufacturer = "Linux 2.6.10-5-386 uhci_hcd"
    product = "VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#4)"
    serial = "0000:00:10.3"
    bcdDevice = 0206
    speed = "12"
  usb device: name = 5-0:1.0, bus_id = 5-0:1.0, bus = usb
    path = /devices/pci0000:00/0000:00:10.4/usb5/5-0:1.0
    bInterfaceNumber = 0
    bInterfaceClass = 9
    bInterfaceSubClass = 0
    bInterfaceProtocol = 0
    if: 5-0:1.0 @ /devices/pci0000:00/0000:00:10.4/usb5
    bDeviceClass = 9
    bDeviceSubClass = 0
    bDeviceProtocol = 1
    idVendor = 0x0000
    idProduct = 0x0000
    manufacturer = "Linux 2.6.10-5-386 ehci_hcd"
    product = "VIA Technologies, Inc. USB 2.0"
    serial = "0000:00:10.4"
    bcdDevice = 0206
    speed = "480"
  usb device: name = usb1, bus_id = usb1, bus = usb
    path = /devices/pci0000:00/0000:00:10.0/usb1
  usb device: name = usb2, bus_id = usb2, bus = usb
    path = /devices/pci0000:00/0000:00:10.1/usb2
  usb device: name = usb3, bus_id = usb3, bus = usb
    path = /devices/pci0000:00/0000:00:10.2/usb3
  usb device: name = usb4, bus_id = usb4, bus = usb
    path = /devices/pci0000:00/0000:00:10.3/usb4
  usb device: name = usb5, bus_id = usb5, bus = usb
    path = /devices/pci0000:00/0000:00:10.4/usb5
>> usb.3.1: joydev mod
----- exec: "/sbin/modprobe joydev " -----
  FATAL: Error inserting joydev
(/lib/modules/2.6.10-5-386/kernel/drivers/input/joydev.ko): Operation not permitted
----- return code: ? -----
>> usb.3.2: evdev mod
>> usb.3.3: input
  input: name = event0, path = /class/input/event0
    dev = 13:64
  input: name = event1, path = /class/input/event1
    dev = 13:65
    input device: bus = usb, bus_id = 2-1:1.0 driver = usbhid
      path = /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0
  input: name = event2, path = /class/input/event2
    dev = 13:66
  input: name = mice, path = /class/input/mice
    dev = 13:63
  input: name = mouse0, path = /class/input/mouse0
    dev = 13:32
    input device: bus = usb, bus_id = 2-1:1.0 driver = usbhid
      path = /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0
  input: name = ts0, path = /class/input/ts0
    dev = 13:128
    input device: bus = usb, bus_id = 2-1:1.0 driver = usbhid
      path = /devices/pci0000:00/0000:00:10.1/usb2/2-1/2-1:1.0
>> usb.3.4: lp
  usb: name = lp0, path = /class/usb/lp0
    dev = 180:0
    usb device: bus = usb, bus_id = 1-2:1.0 driver = usblp
      path = /devices/pci0000:00/0000:00:10.0/usb1/1-2/1-2:1.0
  usb: name = lp1, path = /class/usb/lp1
    dev = 180:1
    usb device: bus = usb, bus_id = 2-2:1.0 driver = usblp
      path = /devices/pci0000:00/0000:00:10.1/usb2/2-2/2-2:1.0
>> edd.1: edd mod
----- exec: "/sbin/modprobe edd " -----
  FATAL: Error inserting edd
(/lib/modules/2.6.10-5-386/kernel/drivers/firmware/edd.ko): Operation not permitted
----- return code: ? -----
>> edd.2: edd info
>> modem.1: serial
******  started child process 7705 (15s/120s)  ******
******  stopped child process 7705 (120s)  ******
>> mouse.2: serial
******  started child process 7706 (20s/20s)  ******
******  stopped child process 7706 (20s)  ******
>> input.1: joydev mod
----- exec: "/sbin/modprobe joydev " -----
  FATAL: Error inserting joydev
(/lib/modules/2.6.10-5-386/kernel/drivers/input/joydev.ko): Operation not permitted
----- return code: ? -----
>> input.1.1: evdev mod
>> input.2: input
----- /proc/bus/input/devices -----
  I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
  N: Name="AT Translated Set 2 keyboard"
  P: Phys=isa0060/serio0/input0
  H: Handlers=kbd event0 
  B: EV=120013 
  B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe 
  B: MSC=10 
  B: LED=7 
  
  I: Bus=0003 Vendor=046d Product=c00e Version=1110
  N: Name="Logitech USB-PS/2 Optical Mouse"
  P: Phys=usb-0000:00:10.1-1/input0
  H: Handlers=mouse0 event1 ts0 
  B: EV=f 
  B: KEY=70000 0 0 0 0 0 0 0 0 
  B: REL=103 
  B: ABS=100 0 
  
  I: Bus=0010 Vendor=001f Product=0001 Version=0100
  N: Name="PC Speaker"
  P: Phys=isa0061/input0
  H: Handlers=kbd event2 
  B: EV=40001 
  B: SND=6 
  
----- /proc/bus/input/devices end -----
bus = 17, name = AT Translated Set 2 keyboard
  handlers = kbd event0
  key = 000000040200000003802078f840d001f2ffffdfffeffffffffffffffffffffe
  mouse buttons = 0
  mouse wheels = 0
bus = 3, name = Logitech USB-PS/2 Optical Mouse
  handlers = mouse0 event1 ts0
  key = 000700000000000000000000000000000000000000000000000000000000000000000000
  rel = 00000103
  mouse buttons = 3
  mouse wheels = 1
bus = 16, name = PC Speaker
  handlers = kbd event2
  mouse buttons = 0
  mouse wheels = 0
>> fb.1: read info
>> net.1: get network data
  net interface: name = eth0, classname = net, path = /class/net/eth0
    hw_addr = 00:11:5b:f4:1b:c0
    net device: path = /devices/pci0000:00/0000:00:12.0
    net driver: name = via-rhine, path = /bus/pci/drivers/via-rhine
  net interface: name = lo, classname = net, path = /class/net/lo
    hw_addr = 00:00:00:00:00:00
  net interface: name = sit0, classname = net, path = /class/net/sit0
    hw_addr = 00:00:00:00
>> pppoe.1: looking for pppoe
>> pppoe.2: discovery
eth0: socket failed: Operation not permitted
>> isdn.1: list
>> dsl.1: list
>> int.2: cdrom
>> int.3: media
>> int.4.1: /dev/hda
  read_block0: open(/dev/hda) failed
>> int.4: floppy
>> int.5: bios
  bios ctrl 0: 20
>> int.6: mouse
>> int.7: hdb
>> int.8: usbscsi
>> int.9: hotplug
>> int.10: modem
>> int.11: wlan
>> int.12: udev

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.




More information about the kernel-bugs mailing list