[Bug 16371] RTL-8319 not working (in what way?)
bugzilla-daemon at bugzilla.ubuntu.com
bugzilla-daemon at bugzilla.ubuntu.com
Mon Sep 26 17:33:55 UTC 2005
Please do not reply to this email. You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=16371
Ubuntu | kernel-package
------- Additional Comments From fourier21 at gmail.com 2005-09-26 18:33 UTC -------
root at sauron:/home/jose # lspci
0000:00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] System
Controller (rev 25)
0000:00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-751 [Irongate] AGP Bri
dge (rev 01)
0000:00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ISA (rev 0 1)
0000:00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-756 [Viper] IDE (re
v 07)
0000:00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-756 [Viper] ACPI (rev 03)
0000:00:07.4 USB Controller: Advanced Micro Devices [AMD] AMD-756 [Viper] USB (r
ev 06)
0000:00:08.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capt
ure (rev 11)
0000:00:08.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (r
ev 11)
0000:00:09.0 Multimedia audio controller: Ensoniq 5880 AudioPCI (rev 04)
0000:00:0a.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:0a.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:0a.2 USB Controller: ALi Corporation USB 1.1 Controller (rev 03)
0000:00:0a.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01)
0000:00:0c.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C
/8139C+ (rev 10)
0000:01:05.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX
100 DDR/200 DDR] (rev b2)
root at sauron:/home/jose # lspci -n
0000:00:00.0 0600: 1022:7006 (rev 25)
0000:00:01.0 0604: 1022:7007 (rev 01)
0000:00:07.0 0601: 1022:7408 (rev 01)
0000:00:07.1 0101: 1022:7409 (rev 07)
0000:00:07.3 0680: 1022:740b (rev 03)
0000:00:07.4 0c03: 1022:740c (rev 06)
0000:00:08.0 0400: 109e:036e (rev 11)
0000:00:08.1 0480: 109e:0878 (rev 11)
0000:00:09.0 0401: 1274:5880 (rev 04)
0000:00:0a.0 0c03: 10b9:5237 (rev 03)
0000:00:0a.1 0c03: 10b9:5237 (rev 03)
0000:00:0a.2 0c03: 10b9:5237 (rev 03)
0000:00:0a.3 0c03: 10b9:5239 (rev 01)
0000:00:0c.0 0200: 10ec:8139 (rev 10)
0000:01:05.0 0300: 10de:0111 (rev b2)
root at sauron:/home/jose # lsmod
Module Size Used by
ipv6 217408 6
binfmt_misc 10888 1
rfcomm 34972 0
l2cap 22404 5 rfcomm
bluetooth 43012 4 rfcomm,l2cap
cpufreq_powersave 1920 0
cpufreq_stats 5124 0
cpufreq_userspace 4444 0
cpufreq_ondemand 5916 0
cpufreq_conservative 6820 0
freq_table 4484 1 cpufreq_stats
tc1100_wmi 6916 0
video 16004 0
battery 9604 0
container 4608 0
i2c_acpi_ec 5760 0
fan 4740 0
button 6672 0
pcc_acpi 11392 0
sony_acpi 5516 0
thermal 13192 0
processor 23100 1 thermal
ac 4996 0
dev_acpi 11396 0
hotkey 9508 0
af_packet 20232 0
floppy 52692 0
pcspkr 3652 0
rtc 11832 0
usblp 11776 0
snd_ens1371 22240 1
gameport 14472 1 snd_ens1371
snd_rawmidi 22816 1 snd_ens1371
snd_seq_device 8204 1 snd_rawmidi
snd_ac97_codec 72188 1 snd_ens1371
snd_pcm_oss 46368 0
snd_mixer_oss 16128 1 snd_pcm_oss
snd_pcm 78344 3 snd_ens1371,snd_ac97_codec,snd_pcm_oss
snd_timer 21764 1 snd_pcm
snd 48644 10 snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97
_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 9184 1 snd
snd_page_alloc 10120 1 snd_pcm
bt878 9912 0
bttv 141456 1 bt878
video_buf 19844 1 bttv
firmware_class 9472 1 bttv
i2c_algo_bit 8584 1 bttv
v4l2_common 5888 1 bttv
btcx_risc 4872 1 bttv
tveeprom 12568 1 bttv
videodev 9344 1 bttv
i2c_amd756 6148 0
i2c_core 19728 5 i2c_acpi_ec,bttv,i2c_algo_bit,tveeprom,i2c_amd75 6
shpchp 80612 0
pci_hotplug 24628 1 shpchp
amd_k7_agp 8460 1
agpgart 32328 1 amd_k7_agp
ext3 115976 1
jbd 48536 1 ext3
nls_iso8859_1 4224 1
nls_cp437 5888 1
vfat 12288 1
fat 46492 1 vfat
dm_mod 50364 1
tsdev 7616 0
evdev 9088 0
psmouse 26116 0
mousedev 10912 1
parport_pc 31812 1
lp 11460 0
parport 32072 2 parport_pc,lp
md 40656 0
unix 24624 868
reiserfs 217200 1
vga16fb 12232 1
vgastate 8320 1 vga16fb
softcursor 2432 1 vga16fb
cfbimgblt 2944 1 vga16fb
cfbfillrect 3840 1 vga16fb
cfbcopyarea 4480 1 vga16fb
fbcon 34176 72
tileblit 2560 1 fbcon
font 8448 1 fbcon
bitblit 5248 1 fbcon
8139cp 18432 0
8139too 23552 0
mii 5248 2 8139cp,8139too
ehci_hcd 29448 0
ohci_hcd 18564 0
usbcore 104188 4 usblp,ehci_hcd,ohci_hcd
ide_cd 36996 0
cdrom 33952 1 ide_cd
ide_disk 16128 5
ide_generic 1664 0
amd74xx 12828 1
ide_core 125268 4 ide_cd,ide_disk,ide_generic,amd74xx
root at sauron:/home/jose # dmesg
0] Mount-cache hash table entries: 512
[4294669.688000] CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 0
0000000 00000000 00000000 00000000
[4294669.688000] CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00
000000 00000000 00000000 00000000
[4294669.688000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/lin e)
[4294669.688000] CPU: L2 Cache: 64K (64 bytes/line)
[4294669.688000] CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020
00000000 00000000 00000000
[4294669.688000] CPU: AMD Duron(tm) Processor stepping 01
[4294669.688000] Enabling fast FPU save and restore... done.
[4294669.688000] Checking 'hlt' instruction... OK.
[4294669.692000] Checking for popad bug... OK.
[4294669.692000] checking if image is initramfs... it is
[4294670.592000] Freeing initrd memory: 4660k freed
[4294670.598000] ACPI: Looking for DSDT in initrd... not found!
[4294670.723000] not found!
[4294670.732000] ACPI: setting ELCR to 0800 (from 0e20)
[4294670.734000] NET: Registered protocol family 16
[4294670.734000] EISA bus registered
[4294670.734000] ACPI: bus type pci registered
[4294670.748000] PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
[4294670.748000] PCI: Using configuration type 1
[4294670.748000] mtrr: v2.0 (20020519)
[4294670.749000] ACPI: Subsystem revision 20050729
[4294670.763000] ACPI: Interpreter enabled
[4294670.763000] ACPI: Using PIC for interrupt routing
[4294670.764000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294670.764000] PCI: Probing PCI hardware (bus 00)
[4294670.764000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294670.769000] Boot video device is 0000:01:05.0
[4294670.771000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294670.776000] ACPI: Power Resource [URP1] (off)
[4294670.777000] ACPI: Power Resource [URP2] (off)
[4294670.777000] ACPI: Power Resource [FDDP] (off)
[4294670.777000] ACPI: Power Resource [LPTP] (off)
[4294670.778000] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[4294670.778000] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[4294670.779000] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[4294670.779000] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[4294670.779000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294670.779000] pnp: PnP ACPI init
[4294670.786000] pnp: PnP ACPI: found 11 devices
[4294670.786000] PnPBIOS: Disabled by ACPI PNP
[4294670.786000] PCI: Using ACPI for IRQ routing
[4294670.786000] PCI: If a device doesn't work, try "pci=routeirq". If it helps
, post a report
[4294670.789000] pnp: 00:00: ioport range 0xde00-0xde03 has been reserved
[4294670.791000] audit: initializing netlink socket (disabled)
[4294670.791000] audit: initialized
[4294670.791000] VFS: Disk quotas dquot_6.5.1
[4294670.791000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294670.791000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[4294670.791000] devfs: boot_options: 0x0
[4294670.791000] Initializing Cryptographic API
[4294670.791000] isapnp: Scanning for PnP cards...
[4294671.145000] isapnp: No Plug & Play device found
[4294671.200000] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 i
rq 1,12
[4294671.202000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294671.202000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294671.202000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ shari
ng enabled
[4294671.202000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.202000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.207000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294671.207000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294671.207000] io scheduler noop registered
[4294671.207000] io scheduler anticipatory registered
[4294671.207000] io scheduler deadline registered
[4294671.207000] io scheduler cfq registered
[4294671.208000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blo
cksize
[4294671.209000] EISA: Probing bus 0 at eisa.0
[4294671.209000] Cannot allocate resource for EISA slot 5
[4294671.209000] EISA: Detected 0 cards.
[4294671.209000] NET: Registered protocol family 2
[4294671.218000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294671.218000] TCP established hash table entries: 16384 (order: 5, 131072 byt es)
[4294671.218000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294671.219000] TCP: Hash tables configured (established 16384 bind 16384)
[4294671.219000] NET: Registered protocol family 8
[4294671.219000] NET: Registered protocol family 20
[4294671.219000] ACPI wakeup devices:
[4294671.219000] PCI0 UAR1 USB
[4294671.219000] ACPI: (supports S0 S1 S4 S5)
[4294671.220000] Freeing unused kernel memory: 224k freed
[4294671.256000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294671.329000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294671.329000] ide: Assuming 33MHz system bus speed for PIO modes; override wi
th idebus=xx
[4294671.329000] ACPI: bus type ide registered
[4294671.358000] AMD7409: IDE controller at PCI slot 0000:00:07.1
[4294671.358000] AMD7409: chipset revision 7
[4294671.358000] AMD7409: not 100% native mode: will probe irqs later
[4294671.358000] AMD7409: 0000:00:07.1 (rev 07) UDMA66 controller
[4294671.358000] ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb: pio
[4294671.358000] ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd: DMA
[4294671.358000] Probing IDE interface ide0...
[4294671.622000] hda: ST330621A, ATA DISK drive
[4294672.234000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294672.234000] Probing IDE interface ide1...
[4294672.906000] hdc: HL-DT-ST GCE-8526B, ATAPI CD/DVD-ROM drive
[4294673.620000] hdd: HL-DT-ST GCE-8160B, ATAPI CD/DVD-ROM drive
[4294673.671000] ide1 at 0x170-0x177,0x376 on irq 15
[4294673.671000] Probing IDE interface ide2...
[4294674.184000] Probing IDE interface ide3...
[4294674.697000] Probing IDE interface ide4...
[4294675.210000] Probing IDE interface ide5...
[4294675.733000] hda: max request size: 128KiB
[4294675.733000] hda: 58633344 sectors (30020 MB) w/512KiB Cache, CHS=58168/16/6
3, UDMA(66)
[4294675.733000] hda: cache flushes not supported
[4294675.733000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
[4294675.807000] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
[4294675.807000] Uniform CD-ROM driver Revision: 3.20
[4294675.809000] hdd: ATAPI 40X CD-ROM CD-R/RW drive, 2048kB Cache
[4294677.215000] Attempting manual resume
[4294677.215000] swsusp: Suspend partition has wrong signature?
[4294677.332000] usbcore: registered new driver usbfs
[4294677.332000] usbcore: registered new driver hub
[4294677.334000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Dri
ver (PCI)
[4294677.335000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 5
[4294677.335000] PCI: setting IRQ 5 as level-triggered
[4294677.335000] ACPI: PCI Interrupt 0000:00:07.4[D] -> Link [LNKD] -> GSI 5 (le
vel, low) -> IRQ 5
[4294677.335000] ohci_hcd 0000:00:07.4: Advanced Micro Devices [AMD] AMD-756 [Vi
per] USB
[4294677.336000] ohci_hcd 0000:00:07.4: new USB bus registered, assigned bus num
ber 1
[4294677.336000] ohci_hcd 0000:00:07.4: irq 5, io mem 0xeffcf000
[4294677.387000] hub 1-0:1.0: USB hub found
[4294677.387000] hub 1-0:1.0: 4 ports detected
[4294677.388000] ACPI: PCI Interrupt 0000:00:0a.0[B] -> Link [LNKD] -> GSI 5 (le
vel, low) -> IRQ 5
[4294677.388000] ohci_hcd 0000:00:0a.0: ALi Corporation USB 1.1 Controller
[4294677.388000] ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus num
ber 2
[4294677.388000] ohci_hcd 0000:00:0a.0: irq 5, io mem 0xefffc000
[4294677.441000] hub 2-0:1.0: USB hub found
[4294677.441000] hub 2-0:1.0: 2 ports detected
[4294677.444000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
[4294677.444000] PCI: setting IRQ 10 as level-triggered
[4294677.444000] ACPI: PCI Interrupt 0000:00:0a.1[C] -> Link [LNKA] -> GSI 10 (l
evel, low) -> IRQ 10
[4294677.444000] ohci_hcd 0000:00:0a.1: ALi Corporation USB 1.1 Controller (#2)
[4294677.444000] ohci_hcd 0000:00:0a.1: new USB bus registered, assigned bus num
ber 3
[4294677.444000] ohci_hcd 0000:00:0a.1: irq 10, io mem 0xefffd000
[4294677.497000] hub 3-0:1.0: USB hub found
[4294677.497000] hub 3-0:1.0: 2 ports detected
[4294677.500000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[4294677.500000] PCI: setting IRQ 11 as level-triggered
[4294677.500000] ACPI: PCI Interrupt 0000:00:0a.2[D] -> Link [LNKB] -> GSI 11 (l
evel, low) -> IRQ 11
[4294677.500000] ohci_hcd 0000:00:0a.2: ALi Corporation USB 1.1 Controller (#3)
[4294677.500000] ohci_hcd 0000:00:0a.2: new USB bus registered, assigned bus num
ber 4
[4294677.500000] ohci_hcd 0000:00:0a.2: irq 11, io mem 0xefffe000
[4294677.553000] hub 4-0:1.0: USB hub found
[4294677.553000] hub 4-0:1.0: 2 ports detected
[4294677.688000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
[4294677.688000] PCI: setting IRQ 9 as level-triggered
[4294677.688000] ACPI: PCI Interrupt 0000:00:0a.3[A] -> Link [LNKC] -> GSI 9 (le
vel, low) -> IRQ 9
[4294677.688000] ehci_hcd 0000:00:0a.3: ALi Corporation USB 2.0 Controller
[4294677.688000] ehci_hcd 0000:00:0a.3: debug port 1
[4294677.709000] ehci_hcd 0000:00:0a.3: new USB bus registered, assigned bus num
ber 5
[4294677.709000] ehci_hcd 0000:00:0a.3: irq 9, io mem 0xeffffe00
[4294677.709000] ehci_hcd 0000:00:0a.3: USB 2.0 initialized, EHCI 1.00, driver 1
0 Dec 2004
[4294677.709000] hub 5-0:1.0: USB hub found
[4294677.709000] hub 5-0:1.0: 6 ports detected
[4294677.751000] 8139too Fast Ethernet driver 0.9.27
[4294677.751000] ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 10 (l
evel, low) -> IRQ 10
[4294677.751000] PCI: Unable to reserve I/O region #1:100 at de00 for device 0000:0
0:0c.0
[4294677.751000] Trying to free nonexistent resource <0000de00-0000deff>
[4294677.751000] Trying to free nonexistent resource <efffff00-efffffff>
[4294677.751000] 8139too: probe of 0000:00:0c.0 failed with error -16
[4294677.755000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294677.755000] 8139cp: pci dev 0000:00:0c.0 (id 10ec:8139 rev 10) is not an 81
39C+ compatible chip
[4294677.755000] 8139cp: Try the "8139too" driver instead.
[4294678.062000] usb 4-1: new full speed USB device using ohci_hcd and address 3
[4294681.366000] vga16fb: initializing
[4294681.366000] vga16fb: mapped to 0xc00a0000
[4294681.504000] Console: switching to colour frame buffer device 80x30
[4294681.504000] fb0: VGA16 VGA frame buffer device
[4294681.810000] Attempting manual resume
[4294681.829000] swsusp: Suspend partition has wrong signature?
[4294681.857000] ReiserFS: hda2: found reiserfs format "3.6" with standard journ al
[4294682.575000] ReiserFS: hda2: using ordered data mode
[4294682.586000] ReiserFS: hda2: journal params: device hda2, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[4294682.590000] ReiserFS: hda2: checking transaction log (hda2)
[4294682.652000] ReiserFS: hda2: Using r5 hash to sort names
[4294683.824000] NET: Registered protocol family 1
[4294684.800000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294691.634000] Adding 401616k swap on /dev/hda5. Priority:-1 extents:1
[4294695.366000] parport: PnPBIOS parport detected.
[4294695.366000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTA
TE,COMPAT,EPP,ECP,DMA]
[4294695.454000] lp0: using parport0 (interrupt-driven).
[4294695.525000] mice: PS/2 mouse device common for all mice
[4294695.766000] input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
[4294697.758000] ts: Compaq touchscreen protocol output
[4294699.774000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel at r
edhat.com
[4294701.867000] cdrom: open failed.
[4294701.869000] cdrom: open failed.
[4294703.890000] kjournald starting. Commit interval 5 seconds
[4294703.905000] EXT3 FS on hda3, internal journal
[4294703.905000] EXT3-fs: mounted filesystem with ordered data mode.
[4294706.820000] Linux agpgart interface v0.101 (c) Dave Jones
[4294706.853000] agpgart: Detected AMD Irongate chipset
[4294706.853000] agpgart: AMD 751 chipset with NVidia GeForce detected. Forcing
to 1X due to errata.
[4294706.877000] agpgart: AGP aperture is 64M @ 0xe8000000
[4294707.143000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294707.204000] shpchp: HPC vendor_id 1022 device_id 7007 ss_vid 0 ss_did 0
[4294707.204000] shpchp: shpc_init: cannot reserve MMIO region
[4294707.204000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294708.106000] Linux video capture interface: v1.00
[4294708.997000] bttv: driver version 0.9.15 loaded
[4294708.997000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[4294709.016000] bttv: Bt8xx card found (0).
[4294709.016000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKA] -> GSI 10 (l
evel, low) -> IRQ 10
[4294709.016000] bttv0: Bt878 (rev 17) at 0000:00:08.0, irq: 10, latency: 64, mm
io: 0xeddfe000
[4294709.016000] bttv0: using: *** UNKNOWN/GENERIC *** [card=0,autodetected]
[4294709.016000] bttv0: gpio: en=00000000, out=00000000 in=00047ff3 [init]
[4294709.024000] tveeprom(bttv internal): Huh, no eeprom present (err=-121)?
[4294709.024000] bttv0: using tuner=-1
[4294709.024000] bttv0: i2c: checking for MSP34xx @ 0x80... not found
[4294709.027000] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[4294709.029000] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[4294709.031000] bttv0: i2c: checking for TDA9887 @ 0x86... not found
[4294709.077000] bttv0: registered device video0
[4294709.105000] bttv0: registered device vbi0
[4294709.444000] bt878: AUDIO driver version 0.0.0 loaded
[4294709.455000] bt878: Bt878 AUDIO function found (0).
[4294709.455000] ACPI: PCI Interrupt 0000:00:08.1[A] -> Link [LNKA] -> GSI 10 (l
evel, low) -> IRQ 10
[4294709.455000] bt878(0): Bt878 (rev 17) at 00:08.1, irq: 10, latency: 64, memo
ry: 0xeddff000
[4294710.396000] ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKB] -> GSI 11 (l
evel, low) -> IRQ 11
[4294715.022000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer de
v 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0x7404
[4294715.073000] usbcore: registered new driver usblp
[4294715.073000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driv er
[4294715.396000] Real Time Clock Driver v1.12
[4294715.536000] input: PC Speaker
[4294716.828000] Floppy drive(s): fd0 is 1.44M
[4294716.843000] FDC 0 is a post-1991 82077
[4294720.072000] NET: Registered protocol family 17
[4294724.321000] ACPI: CPU0 (power states: C1[C1])
[4294724.338000] ACPI: Thermal Zone [THRM] (75 C)
[4294724.548000] ACPI: Power Button (FF) [PWRF]
[4294724.548000] ACPI: Sleep Button (FF) [SLPF]
[4294724.548000] ACPI: Power Button (CM) [PWRB]
[4294724.714000] ibm_acpi: ec object not found
[4294741.235000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294741.235000] apm: overridden by ACPI.
[4294747.773000] powernow: No powernow capabilities detected
[4294748.089000] Bluetooth: Core ver 2.7
[4294748.089000] NET: Registered protocol family 31
[4294748.089000] Bluetooth: HCI device and connection manager initialized
[4294748.089000] Bluetooth: HCI socket layer initialized
[4294748.148000] Bluetooth: L2CAP ver 2.7
[4294748.148000] Bluetooth: L2CAP socket layer initialized
[4294748.253000] Bluetooth: RFCOMM ver 1.5
[4294748.253000] Bluetooth: RFCOMM socket layer initialized
[4294748.253000] Bluetooth: RFCOMM TTY layer initialized
[4294753.412000] NET: Registered protocol family 10
[4294753.413000] Disabled Privacy Extensions on device c02eb280(lo)
[4294753.413000] IPv6 over IPv4 tunneling driver
--
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
More information about the kernel-bugs
mailing list