[Bug 15118] Error updating Linux kernel image through "Software Updates"
bugzilla-daemon at bugzilla.ubuntu.com
bugzilla-daemon at bugzilla.ubuntu.com
Thu Sep 15 15:51:57 UTC 2005
Please do not reply to this email. You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=15118
Ubuntu | linux
------- Additional Comments From sgronblo at abo.fi 2005-09-15 16:51 UTC -------
(In reply to comment #3)
> Can you do "ls -la /lib/modules/2.6.10-5-386/kernel/drivers/char/drm/"
>
> Also, send me the output of the "cat /proc/mounts" and "dmesg" commands.
>
> I would also suggest, after doing the above, performing an fsck on your
rootfs. You can force this on a reboot
> by typing "shutdown -r -F now" at the command line. This will reboot and
(hopefully) force an fsck.
ls -la /lib/modules/2.6.10-5-386/kernel/drivers/char/drm/
drwxr-xr-x 2 root root 4096 2005-09-13 14:18 .
drwxr-xr-x 10 root root 4096 2005-09-13 14:18 ..
?rwsrwsrwt 65535 4294967295 4294967295 4294967295 1970-01-01 01:59 drm.ko
?rwsrwsrwt 65535 4294967295 4294967295 4294967295 1970-01-01 01:59 i810.ko
?rwsrwsrwt 65535 4294967295 4294967295 4294967295 1970-01-01 01:59 i830.ko
?rwsrwsrwt 65535 4294967295 4294967295 4294967295 1970-01-01 01:59 i915.ko
-rw-r--r-- 1 root root 64289 2005-08-19 03:04 mga.ko
-rw-r--r-- 1 root root 51354 2005-08-19 03:04 r128.ko
-rw-r--r-- 1 root root 84111 2005-08-19 03:04 radeon.ko
-rw-r--r-- 1 root root 12144 2005-08-19 03:04 sis.ko
-rw-r--r-- 1 root root 5430 2005-08-19 03:04 tdfx.ko
cat /proc/mounts
rootfs / rootfs rw 0 0
/dev2/root2 / ext3 rw 0 0
proc /proc proc rw,nodiratime 0 0
sysfs /sys sysfs rw 0 0
/dev2/root2 /.dev ext3 rw 0 0
none /dev tmpfs rw 0 0
devpts /dev/pts devpts rw 0 0
tmpfs /dev/shm tmpfs rw 0 0
/dev/hda1 /mnt/winxp ntfs
ro,noatime,nodiratime,uid=1000,gid=1000,fmask=0177,dmask=077,nls=cp437,errors=continue,mft_zone_multiplier=1
0 0
usbfs /proc/bus/usb usbfs rw 0 0
dmesg
ailed to call pci_enable_device(). As a temporary
** workaround, the "pci=routeirq" argument restores the old
** behavior. If this argument makes the device work again,
** please email the output of "lspci" to bjorn.helgaas at hp.com
** so I can fix the driver.
pnp: 00:00: ioport range 0xfe00-0xfe01 has been reserved
pnp: 00:00: ioport range 0x1000-0x107f could not be reserved
pnp: 00:00: ioport range 0x1180-0x11bf has been reserved
audit: initializing netlink socket (disabled)
audit(1126384316.993:0): initialized
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
devfs: boot_options: 0x0
Initializing Cryptographic API
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
i8042.c: Detected active multiplexing controller, rev 1.1.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ sharing enabled
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
ACPI: PCI interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 1
Cannot allocate resource for EISA slot 2
Cannot allocate resource for EISA slot 3
Cannot allocate resource for EISA slot 4
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
ELAN USB0 USB1 USB2 MODM
ACPI: (supports S0 S3 S4 S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4296KiB [1 disk] into ram disk... done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
ACPI: CPU0 (power states: C1[C1] C2[C2])
ACPI: Processor [CPU0] (supports 8 throttling states)
NET: Registered protocol family 1
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH4: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
ICH4: chipset revision 2
ICH4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25N060ATMR04-0, ATA DISK drive
elevator: using anticipatory as default io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: max request size: 1024KiB
hda: 117210240 sectors (60011 MB) w/7884KiB Cache, CHS=16383/255/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
Probing IDE interface ide1...
hdc: QSI CD-RW/DVD-ROM SBW-242, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
Stopping tasks: ==|
Freeing memory... done (456 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 1510068k swap on /dev/hda5. Priority:-1 extents:1
EXT3 FS on hda2, internal journal
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache
Uniform CD-ROM driver Revision: 3.20
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 1 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
Synaptics Touchpad, model: 1
Firmware: 5.8
180 degree mounted touchpad
Sensor: 18
new absolute packet format
Touchpad has extended capability bits
-> 4 multi-buttons, i.e. besides standard buttons
-> multifinger detection
-> palm detection
input: SynPS/2 Synaptics TouchPad on isa0060/serio4
ts: Compaq touchscreen protocol output
ieee1394: Initialized config rom entry `ip1394'
SCSI subsystem initialized
sbp2: $Rev: 1219 $ Ben Collins <bcollins at debian.org>
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel at redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
NTFS driver 2.1.22 [Flags: R/O MODULE].
NTFS volume version 3.1.
Real Time Clock Driver v1.12
input: PC Speaker
inserting floppy driver for 2.6.10-5-386
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected an Intel 845G Chipset.
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: AGP aperture is 256M @ 0xe0000000
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #1
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: irq 16, io base 0x1800
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #2
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: irq 19, io base 0x1820
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI
Controller #3
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: irq 18, io base 0x1840
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: new low speed USB device using uhci_hcd and address 2
ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI
ControllerPCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: irq 23, pci mem 0xd0000000
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
usbcore: registered new driver hiddev
usbhid: probe of 1-1:1.0 failed with error -5
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
usb 1-1: USB disconnect, address 2
pciehp: Fails to gain control of native hot-plug
hw_random: cannot enable RNG, aborting
usb 4-3: new high speed USB device using ehci_hcd and address 4
ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1f.5 to 64
Initializing USB Mass Storage driver...
usb 1-1: new low speed USB device using uhci_hcd and address 4
intel8x0_measure_ac97_clock: measured 49288 usecs
intel8x0: clocking to 48000
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-1
usb 1-2: new full speed USB device using uhci_hcd and address 5
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
scsi0 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0
proto 2 vid 0x03F0 pid 0x1504
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[16] MMIO=[d0200000-d02007ff] Max
Packet=[2048]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 17 (level, low) -> IRQ 17
eth0: RealTek RTL8139 at 0x4000, 00:02:3f:b6:9e:37, IRQ 17
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
orinoco 0.13e (David Gibson <hermes at gibson.dropbear.id.au>, Pavel Roskin
<proski at gnu.org>, et al)
orinoco_pci 0.13e (Pavel Roskin <proski at gnu.org>, David Gibson
<hermes at gibson.dropbear.id.au> & Jean Tourrilhes <jt at hpl.hp.com>)
ACPI: PCI interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 18
orinoco_pci: Detected Orinoco/Prism2 PCI device at 0000:02:02.0, mem:0xF0000000
to 0xF0000FFF -> 0xe0bec000, irq:18
Reset
done..........................................................................................................................................................................................................;
Clear Reset................................<6>eth0: link up, 10Mbps,
half-duplex, lpa 0x0000
..................................................................................................................................................................................................................................................................................................................................................................................................................................................................................;
pci_cor : reg = 0x0 - FFFBFB4D - FFFBF959
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023f33340046cd]
eth1: Station identity 001f:0009:0001:0004
eth1: Looks like an Intersil firmware version 1.4.9
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:01:24:D0:52:84
eth1: Station name "Prism I"
eth1: ready
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:02:04.0[A] -> GSI 16 (level, low) -> IRQ 16
Yenta: CardBus bridge found at 0000:02:04.0 [1025:002b]
Yenta O2: res at 0x94/0xD4: 00/ea
Yenta O2: enabling read prefetch/write burst
Yenta: ISA IRQ mask 0x0438, PCI irq 16
Socket status: 30000007
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f0500(lo)
IPv6 over IPv4 tunneling driver
Vendor: LITE-ON Model: DVDRW SOHW-1633S Rev: BS0H
Type: CD-ROM ANSI SCSI revision: 00
usb-storage: device scan complete
sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 5
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
radeon: Unknown symbol drm_open
radeon: Unknown symbol drm_fasync
radeon: Unknown symbol drm_poll
radeon: Unknown symbol drm_core_get_reg_ofs
radeon: Unknown symbol drm_irq_uninstall
radeon: Unknown symbol drm_ioctl
radeon: Unknown symbol drm_exit
radeon: Unknown symbol drm_debug
radeon: Unknown symbol drm_core_get_map_ofs
radeon: Unknown symbol drm_init
radeon: Unknown symbol drm_vbl_send_signals
radeon: Unknown symbol drm_ati_pcigart_init
radeon: Unknown symbol drm_mmap
radeon: Unknown symbol drm_order
radeon: Unknown symbol drm_ati_pcigart_cleanup
radeon: Unknown symbol drm_core_reclaim_buffers
radeon: Unknown symbol drm_release
cs: IO port probe 0x0100-0x04ff: excluding 0x200-0x20f 0x4d0-0x4d7
cs: IO port probe 0x0800-0x08ff: clean.
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0a00-0x0aff: clean.
eth0: no IPv6 routers present
init_special_inode: bogus i_mode (177777)
ibm_acpi: ec object not found
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
eth0: link down
eth0: link up, 10Mbps, half-duplex, lpa 0x0000
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
usb 1-2: USB disconnect, address 5
drivers/usb/class/usblp.c: usblp0: removed
usb 1-2: new full speed USB device using uhci_hcd and address 6
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0
proto 2 vid 0x03F0 pid 0x1504
usb 1-2: USB disconnect, address 6
drivers/usb/class/usblp.c: usblp0: removed
usb 1-2: new full speed USB device using uhci_hcd and address 7
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 7 if 0 alt 0
proto 2 vid 0x03F0 pid 0x1504
usb 1-2: USB disconnect, address 7
drivers/usb/class/usblp.c: usblp0: removed
usb 1-2: new full speed USB device using uhci_hcd and address 8
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 8 if 0 alt 0
proto 2 vid 0x03F0 pid 0x1504
usb 1-2: USB disconnect, address 8
drivers/usb/class/usblp.c: usblp0: removed
usb 1-2: new full speed USB device using uhci_hcd and address 9
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 9 if 0 alt 0
proto 2 vid 0x03F0 pid 0x1504
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
init_special_inode: bogus i_mode (177777)
--
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
More information about the kernel-bugs
mailing list