[Bug 15156] New: Skystar2 not working on breezy/2.6.12-*

[bugzilla-daemon at bugzilla.ubuntu.com]

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=15156
Ubuntu | linux

           Summary: Skystar2 not working on breezy/2.6.12-*
           Product: Ubuntu
           Version: unspecified
          Platform: i386
        OS/Version: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: P2
         Component: linux
        AssignedTo: ben.collins at ubuntu.com
        ReportedBy: sepreh at gmx.de
         QAContact: kernel-bugs at lists.ubuntu.com


Since the update to breezy with kernel 2.6.12 my SkyStar2 refuses to work. After bootup, udev doesn't put up the 
correct device names (only /dev/dvb0.demux0, not /dev/dvb/adapter0/*). After a restart, the /dev/dvb/adapter* links 
are there, but still frontend0 is missing. 
 
The kernel log gives me: 
[4294718.822000] b2c2-flexcop: B2C2 FlexcopII/II(b)/III digital TV receiver chip loaded successfully 
[4294718.832000] flexcop-pci: will use the HW PID filter. 
[4294718.832000] flexcop-pci: card revision 1 
[4294718.832000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 
[4294718.832000] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16 
[4294718.832000] DVB: registering new adapter (FlexCop Digital TV device). 
[4294718.845000] b2c2-flexcop: MAC address = 00:d0:d7:02:69:ec 
[4294718.847000] b2c2-flexcop: i2c master_xfer failed 
[4294719.048000] b2c2-flexcop: i2c master_xfer failed 
[4294719.048000] b2c2-flexcop: i2c master_xfer failed 
[4294719.048000] mt352_read_register: readreg error (reg=127, ret==-121) 
[4294719.048000] b2c2-flexcop: i2c master_xfer failed 
[4294719.048000] i2c_readbytes: i2c read error (addr 0a, err == -121) 
[4294719.049000] b2c2-flexcop: i2c master_xfer failed 
[4294719.049000] stv0297_readreg: readreg error (reg == 0x80, ret == -22) 
[4294719.049000] b2c2-flexcop: i2c master_xfer failed 
[4294719.049000] mt312_read: ret == -121 
[4294719.049000] b2c2-flexcop: no frontend driver found for this B2C2/FlexCop adapter 
[4294719.115000] ACPI: PCI interrupt for device 0000:01:06.0 disabled 
[4294719.168000] ACPI: PCI Interrupt 0000:01:06.0[A] -> Link [APC1] -> GSI 16 (level, high) -> IRQ 16 
[4294719.194000] drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found 
[4294719.194000] drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters 
[4294719.320000] driver_initialize MAC address = 00:d0:d7:02:69:ec:00:00 
[4294719.320000] DVB: registering new adapter (SkyStar2). 
[4294719.529000] i2c_readbytes: i2c read error (addr 0a, err == -121) 
[4294720.115000] mt352_read_register: readreg error (reg=127, ret==-121) 
[4294720.243000] mt312_read: ret == -121 
[4294720.243000] skystar2: A frontend driver was not found for device 13d0/2103 subsystem 13d0/2103 
 
So, the frontend driver isn't found.

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.