[Bug 17336] New: Printer no longer detected in Breezy

bugzilla-daemon at bugzilla.ubuntu.com bugzilla-daemon at bugzilla.ubuntu.com
Sat Oct 8 20:29:45 UTC 2005 

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=17336
Ubuntu | linux

           Summary: Printer no longer detected in Breezy
           Product: Ubuntu
           Version: unspecified
          Platform: i386
        OS/Version: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: P2
         Component: linux
        AssignedTo: ben.collins at ubuntu.com
        ReportedBy: christopher at thefairground.com
         QAContact: kernel-bugs at lists.ubuntu.com


My printer has stopped working as well.  Odd thing is it's not detected anymore.
 It was working fine 2 nights ago and has since stopped so I'm guessing one of
the updates since October 5th or 6th are responsible.

lsusb does not list it - yes it is a USB printer.  Getting an error on startup
about usb as well.  Here's 
The only other usb device I have connected is my MS wireless mouse which is
working fine.  Printer is a Lexmark e210.  Switching plugs did not change the
situation.  The mouse works perfectly well plugged into the port the printer was
plugged into. System -> Administration -> Printing -> right-click properties of
E210 lists this as status:

Paused: Unable to open USB device "usb://Lexmark/E210": No such device

Dmesg:

$ dmesg
upt Link [LNK5] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[4294671.851000] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294671.851000] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
[4294671.852000] ACPI: PCI Interrupt Link [LMAC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294671.852000] ACPI: PCI Interrupt Link [LAPU] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[4294671.852000] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[4294671.852000] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[4294671.853000] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294671.853000] ACPI: PCI Interrupt Link [LUB2] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[4294671.853000] ACPI: PCI Interrupt Link [LFIR] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[4294671.854000] ACPI: PCI Interrupt Link [L3CM] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[4294671.854000] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 6 7 10 11 12 14 15)
*0, disabled.
[4294671.854000] ACPI: PCI Interrupt Link [APC1] (IRQs *16), disabled.
[4294671.854000] ACPI: PCI Interrupt Link [APC2] (IRQs *17), disabled.
[4294671.855000] ACPI: PCI Interrupt Link [APC3] (IRQs *18), disabled.
[4294671.855000] ACPI: PCI Interrupt Link [APC4] (IRQs *19), disabled.
[4294671.855000] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[4294671.855000] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22) *0, disabled.
[4294671.856000] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22) *0, disabled.
[4294671.856000] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22) *0, disabled.
[4294671.856000] ACPI: PCI Interrupt Link [APCI] (IRQs 20 21 22) *0, disabled.
[4294671.857000] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22) *0, disabled.
[4294671.857000] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22) *0, disabled.
[4294671.857000] ACPI: PCI Interrupt Link [APCS] (IRQs *23), disabled.
[4294671.857000] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22) *0, disabled.
[4294671.858000] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22) *0, disabled.
[4294671.858000] ACPI: PCI Interrupt Link [AP3C] (IRQs 20 21 22) *0, disabled.
[4294671.858000] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22) *0, disabled.
[4294671.863000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.863000] pnp: PnP ACPI init
[4294671.868000] pnp: PnP ACPI: found 15 devices
[4294671.868000] PnPBIOS: Disabled by ACPI PNP
[4294671.868000] PCI: Using ACPI for IRQ routing
[4294671.868000] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps, post a report
[4294671.896000] pnp: 00:00: ioport range 0x4000-0x407f could not be reserved
[4294671.896000] pnp: 00:00: ioport range 0x4080-0x40ff has been reserved
[4294671.896000] pnp: 00:00: ioport range 0x4400-0x447f has been reserved
[4294671.896000] pnp: 00:00: ioport range 0x4480-0x44ff could not be reserved
[4294671.896000] pnp: 00:00: ioport range 0x4200-0x427f has been reserved
[4294671.896000] pnp: 00:00: ioport range 0x4280-0x42ff has been reserved
[4294671.896000] pnp: 00:01: ioport range 0x5000-0x503f has been reserved
[4294671.896000] pnp: 00:01: ioport range 0x5500-0x553f has been reserved
[4294671.897000] audit: initializing netlink socket (disabled)
[4294671.897000] audit: initialized
[4294671.897000] highmem bounce pool size: 64 pages
[4294671.897000] VFS: Disk quotas dquot_6.5.1
[4294671.897000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.897000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[4294671.897000] devfs: boot_options: 0x0
[4294671.897000] Initializing Cryptographic API
[4294671.897000] isapnp: Scanning for PnP cards...
[4294672.252000] isapnp: No Plug & Play device found
[4294672.265000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294672.265000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294672.267000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.267000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.267000] Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ
sharing enabled
[4294672.267000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.268000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.269000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.269000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.269000] io scheduler noop registered
[4294672.269000] io scheduler anticipatory registered
[4294672.269000] io scheduler deadline registered
[4294672.269000] io scheduler cfq registered
[4294672.270000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[4294672.270000] NET: Registered protocol family 2
[4294672.279000] IP: routing cache hash table of 8192 buckets, 64Kbytes
[4294672.279000] TCP established hash table entries: 262144 (order: 9, 2097152
bytes)
[4294672.281000] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[4294672.281000] TCP: Hash tables configured (established 262144 bind 65536)
[4294672.281000] NET: Registered protocol family 8
[4294672.281000] NET: Registered protocol family 20
[4294672.281000] ACPI wakeup devices:
[4294672.281000] HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
[4294672.281000] ACPI: (supports S0 S1 S4 S4bios S5)
[4294672.281000] Freeing unused kernel memory: 168k freed
[4294672.306000] Capability LSM initialized
[4294672.315000] NET: Registered protocol family 1
[4294672.327000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.327000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[4294672.327000] ACPI: bus type ide registered
[4294672.329000] SCSI subsystem initialized
[4294672.330000] libata version 1.11 loaded.
[4294672.333000] NFORCE2: IDE controller at PCI slot 0000:00:09.0
[4294672.333000] NFORCE2: chipset revision 162
[4294672.333000] NFORCE2: not 100% native mode: will probe irqs later
[4294672.333000] NFORCE2: BIOS didn't set cable bits correctly. Enabling workaround.
[4294672.333000] NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
[4294672.333000]     ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
[4294672.333000]     ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
[4294672.333000] Probing IDE interface ide0...
[4294672.591000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.597000] hda: WDC WD1200JB-22GVA0, ATA DISK drive
[4294673.211000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.211000] Probing IDE interface ide1...
[4294673.883000] hdc: LITE-ON LTR-52327S, ATAPI CD/DVD-ROM drive
[4294674.496000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.497000] Probing IDE interface ide2...
[4294675.010000] Probing IDE interface ide3...
[4294675.522000] Probing IDE interface ide4...
[4294676.034000] Probing IDE interface ide5...
[4294676.548000] hda: max request size: 1024KiB
[4294676.558000] hda: 234441648 sectors (120034 MB) w/8192KiB Cache,
CHS=16383/255/63, UDMA(100)
[4294676.559000] hda: cache flushes supported
[4294676.560000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294676.615000] hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache
[4294676.615000] Uniform CD-ROM driver Revision: 3.20
[4294676.834000] usbcore: registered new driver usbfs
[4294676.834000] usbcore: registered new driver hub
[4294676.835000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[4294676.835000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[4294676.835000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 22
(level, high) -> IRQ 22
[4294676.835000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[4294676.835000] ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
[4294676.835000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[4294676.835000] ohci_hcd 0000:00:02.0: irq 22, io mem 0xee004000
[4294676.888000] hub 1-0:1.0: USB hub found
[4294676.888000] hub 1-0:1.0: 3 ports detected
[4294676.891000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
[4294676.891000] ACPI: PCI Interrupt 0000:00:02.1[b] -> Link [APCG] -> GSI 21
(level, high) -> IRQ 21
[4294676.891000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[4294676.891000] ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB
Controller (#2)
[4294676.891000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
[4294676.891000] ohci_hcd 0000:00:02.1: irq 21, io mem 0xee005000
[4294676.944000] hub 2-0:1.0: USB hub found
[4294676.944000] hub 2-0:1.0: 3 ports detected
[4294676.960000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
[4294676.960000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 20
(level, high) -> IRQ 20
[4294676.960000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[4294676.960000] ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
[4294676.960000] ehci_hcd 0000:00:02.2: debug port 1
[4294676.960000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 3
[4294676.960000] ehci_hcd 0000:00:02.2: irq 20, io mem 0xee000000
[4294676.960000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[4294676.960000] ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver
10 Dec 2004
[4294676.960000] hub 3-0:1.0: USB hub found
[4294676.960000] hub 3-0:1.0: 6 ports detected
[4294676.988000] forcedeth.c: Reverse Engineered nForce ethernet driver. Version
0.41.
[4294676.989000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[4294676.989000] ACPI: PCI Interrupt 0000:00:04.0[A] -> Link [APCH] -> GSI 22
(level, high) -> IRQ 22
[4294676.989000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[4294677.336000] ohci_hcd 0000:00:02.1: wakeup
[4294677.501000] eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
[4294677.684000] usb 2-1: new full speed USB device using ohci_hcd and address
2[4294677.764000] usb 2-1: device descriptor read/64, error -110
[4294677.945000] usb 2-1: device descriptor read/64, error -110
[4294678.119000] usb 2-1: new full speed USB device using ohci_hcd and address
3[4294678.199000] usb 2-1: device descriptor read/64, error -110
[4294678.380000] usb 2-1: device descriptor read/64, error -110
[4294678.554000] usb 2-1: new full speed USB device using ohci_hcd and address
4[4294678.958000] usb 2-1: device not accepting address 4, error -110
[4294679.031000] usb 2-1: new full speed USB device using ohci_hcd and address
5[4294679.435000] usb 2-1: device not accepting address 5, error -110
[4294679.612000] usb 2-2: new low speed USB device using ohci_hcd and address 6
[4294679.687000] ACPI: CPU0 (power states: C1[C1])
[4294679.794000] ReiserFS: hda1: found reiserfs format "3.6" with standard journal
[4294686.132000] ReiserFS: hda1: using ordered data mode
[4294686.155000] ReiserFS: hda1: journal params: device hda1, size 8192, journal
first block 18, max trans len 1024, max batch 900, max commit age 30, max trans
age 30
[4294686.156000] ReiserFS: hda1: checking transaction log (hda1)
[4294686.221000] ReiserFS: hda1: Using r5 hash to sort names
[4294688.190000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294691.936000] Adding 497972k swap on /dev/hda5.  Priority:-1 extents:1
[4294705.982000] mice: PS/2 mouse device common for all mice
[4294706.022000] parport: PnPBIOS parport detected.
[4294706.022000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3
[PCSPP,TRISTATE,COMPAT,ECP,DMA]
[4294706.109000] lp0: using parport0 (interrupt-driven).
[4294706.142000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
[4294706.147000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
[4294707.056000] Linux agpgart interface v0.101 (c) Dave Jones
[4294707.072000] nvidia: module license 'NVIDIA' taints kernel.
[4294707.082000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[4294707.082000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [APC4] -> GSI 19
(level, high) -> IRQ 19
[4294707.083000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module  1.0-7667
Fri Jun 17 07:01:04 PDT 2005
[4294709.241000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[4294709.636000] cdrom: open failed.
[4294710.277000] cdrom: open failed.
[4294714.241000] Real Time Clock Driver v1.12
[4294714.353000] input: PC Speaker
[4294714.402000] Floppy drive(s): fd0 is 1.44M
[4294714.423000] FDC 0 is a post-1991 82077
[4294714.789000] agpgart: Detected NVIDIA nForce2 chipset
[4294714.814000] agpgart: AGP aperture is 64M @ 0xe8000000
[4294715.435000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
[4294715.435000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 21
(level, high) -> IRQ 21
[4294715.435000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[4294715.747000] intel8x0_measure_ac97_clock: measured 49810 usecs
[4294715.747000] intel8x0: clocking to 47501
[4294716.334000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294716.358000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.358000] shpchp: shpc_init : shpc_cap_offset == 0
[4294716.358000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[4294718.040000] usbcore: registered new driver hiddev
[4294718.189000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless
Optical Mouse® 1.0A] on usb-0000:00:02.1-2
[4294718.189000] usbcore: registered new driver usbhid
[4294718.189000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294718.359000] ts: Compaq touchscreen protocol output
[4294719.376000] NET: Registered protocol family 17
[4294722.460000] NET: Registered protocol family 10
[4294722.460000] Disabled Privacy Extensions on device c031eb40(lo)
[4294722.460000] IPv6 over IPv4 tunneling driver
[4294723.921000] ACPI: Power Button (FF) [PWRF]
[4294723.921000] ACPI: Power Button (CM) [PWRB]
[4294723.985000] ibm_acpi: ec object not found
[4294728.618000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294728.618000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294728.618000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[4294729.348000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294729.348000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294729.348000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[4294733.352000] eth0: no IPv6 routers present
[4294736.340000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[4294736.340000] apm: overridden by ACPI.
[4294806.416000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294806.416000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294806.416000] agpgart: Putting AGP V3 device at 0000:02:00.0 into 8x mode
[4295462.700000] usb 2-2: USB disconnect, address 6
[4295467.401000] ohci_hcd 0000:00:02.1: wakeup
[4295467.877000] usb 2-2: new full speed USB device using ohci_hcd and address
7[4295467.957000] usb 2-2: device descriptor read/64, error -110
[4295468.138000] usb 2-2: device descriptor read/64, error -110
[4295468.312000] usb 2-2: new full speed USB device using ohci_hcd and address
8[4295468.392000] usb 2-2: device descriptor read/64, error -110
[4295468.573000] usb 2-2: device descriptor read/64, error -110
[4295468.747000] usb 2-2: new full speed USB device using ohci_hcd and address
9[4295469.151000] usb 2-2: device not accepting address 9, error -110
[4295469.224000] usb 2-2: new full speed USB device using ohci_hcd and address 10
[4295469.628000] usb 2-2: device not accepting address 10, error -110
[4295476.127000] usb 2-1: new low speed USB device using ohci_hcd and address
11[4295476.435000] input: USB HID v1.11 Mouse [Microsoft Microsoft Wireless
Optical Mouse® 1.0A] on usb-0000:00:02.1-1
[4295532.057000] input: AT Translated Set 2 keyboard on isa0060/serio0

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.

More information about the kernel-bugs mailing list