[Bug 16927] GA311 netgear nic link speed at 100Mb/s Breezy

Mon Oct 3 23:17:25 UTC 2005

Please do not reply to this email.  You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=16927
Ubuntu | linux

------- Additional Comments From mjrob at hotmail.com  2005-10-04 00:17 UTC -------
0 (usable)
[4294667.296000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[4294667.296000]  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
[4294667.296000]  BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
[4294667.296000]  BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
[4294667.296000]  BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[4294667.296000] 0MB HIGHMEM available.
[4294667.296000] 255MB LOWMEM available.
[4294667.296000] On node 0 totalpages: 65520
[4294667.296000]   DMA zone: 4096 pages, LIFO batch:1
[4294667.296000]   Normal zone: 61424 pages, LIFO batch:31
[4294667.296000]   HighMem zone: 0 pages, LIFO batch:1
[4294667.296000] DMI 2.2 present.
[4294667.296000] ACPI: RSDP (v000 VIAP4X                                ) @
0x000f6080
[4294667.296000] ACPI: RSDT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x0fff3000
[4294667.296000] ACPI: FADT (v001 VIAP4X AWRDACPI 0x42302e31 AWRD 0x00000000) @
0x0fff3040
[4294667.296000] ACPI: DSDT (v001 VIAP4X AWRDACPI 0x00001000 MSFT 0x0100000c) @
0x00000000
[4294667.296000] ACPI: PM-Timer IO Port: 0x408
[4294667.296000] Allocating PCI resources starting at 10000000 (gap:
10000000:efff0000)
[4294667.296000] Built 1 zonelists
[4294667.296000] Kernel command line: root=/dev/hda1 ro quiet splash
[4294667.296000] Local APIC disabled by BIOS -- you can enable it with "lapic"
[4294667.296000] mapped APIC to ffffd000 (01201000)
[4294667.296000] Initializing CPU#0
[4294667.296000] PID hash table entries: 1024 (order: 10, 16384 bytes)
[4294667.296000] Detected 1208.912 MHz processor.
[4294667.296000] Using pmtmr for high-res timesource
[4294667.296000] Console: colour VGA+ 80x25
[4294670.665000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[4294670.665000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[4294670.673000] Memory: 251272k/262080k available (1415k kernel code, 10132k
reserved, 763k data, 224k init, 0k highmem)
[4294670.673000] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[4294670.673000] Calibrating delay loop... 2383.87 BogoMIPS (lpj=1191936)
[4294670.697000] Security Framework v1.0.0 initialized
[4294670.697000] SELinux:  Disabled at boot.
[4294670.697000] Mount-cache hash table entries: 512
[4294670.697000] CPU: After generic identify, caps: bfebf9ff 00000000 00000000
00000000 00000000 00000000 00000000
[4294670.697000] CPU: After vendor identify, caps: bfebf9ff 00000000 00000000
00000000 00000000 00000000 00000000
[4294670.697000] CPU: Trace cache: 12K uops, L1 D cache: 8K
[4294670.697000] CPU: L2 cache: 512K
[4294670.697000] CPU: After all inits, caps: bfebf9ff 00000000 00000000 00000080
00000000 00000000 00000000
[4294670.697000] CPU: Intel Mobile Intel(R) Pentium(R) 4 - M CPU 2.00GHz stepping 07
[4294670.697000] Enabling fast FPU save and restore... done.
[4294670.697000] Enabling unmasked SIMD FPU exception support... done.
[4294670.697000] Checking 'hlt' instruction... OK.
[4294670.701000] Checking for popad bug... OK.
[4294670.701000] checking if image is initramfs... it is
[4294671.582000] Freeing initrd memory: 5011k freed
[4294671.591000] ACPI: Looking for DSDT in initrd... not found!
[4294671.686000]  not found!
[4294671.696000] ACPI: setting ELCR to 0200 (from 1a20)
[4294671.877000] NET: Registered protocol family 16
[4294671.877000] EISA bus registered
[4294671.877000] ACPI: bus type pci registered
[4294671.896000] PCI: PCI BIOS revision 2.10 entry at 0xfb330, last bus=1
[4294671.896000] PCI: Using configuration type 1
[4294671.896000] mtrr: v2.0 (20020519)
[4294671.897000] ACPI: Subsystem revision 20050729
[4294671.913000] ACPI: Interpreter enabled
[4294671.913000] ACPI: Using PIC for interrupt routing
[4294671.914000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.914000] PCI: Probing PCI hardware (bus 00)
[4294671.914000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294671.914000] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[4294671.918000] Boot video device is 0000:01:00.0
[4294671.953000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.955000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
[4294671.956000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14
15) *0, disabled.
[4294671.957000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15)
[4294671.957000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
[4294671.963000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.963000] pnp: PnP ACPI init
[4294671.971000] pnp: PnP ACPI: found 13 devices
[4294671.971000] PnPBIOS: Disabled by ACPI PNP
[4294671.971000] PCI: Using ACPI for IRQ routing
[4294671.971000] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps, post a report
[4294672.014000] audit: initializing netlink socket (disabled)
[4294672.014000] audit: initialized
[4294672.014000] VFS: Disk quotas dquot_6.5.1
[4294672.014000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294672.014000] devfs: 2004-01-31 Richard Gooch (rgooch at atnf.csiro.au)
[4294672.014000] devfs: boot_options: 0x0
[4294672.014000] Initializing Cryptographic API
[4294672.014000] isapnp: Scanning for PnP cards...
[4294672.368000] isapnp: No Plug & Play device found
[4294672.401000] PNP: PS/2 controller doesn't have AUX irq; using default 0xc
[4294672.401000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 112
[4294672.401000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294672.401000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294672.401000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ
sharing enabled
[4294672.401000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.401000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.405000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294672.405000] ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[4294672.405000] io scheduler noop registered
[4294672.405000] io scheduler anticipatory registered
[4294672.405000] io scheduler deadline registered
[4294672.405000] io scheduler cfq registered
[4294672.406000] RAMDISK driver initialized: 16 RAM disks of 8192K size 1024
blocksize
[4294672.406000] EISA: Probing bus 0 at eisa.0
[4294672.406000] Cannot allocate resource for EISA slot 1
[4294672.406000] EISA: Detected 0 cards.
[4294672.406000] NET: Registered protocol family 2
[4294672.416000] IP: routing cache hash table of 2048 buckets, 16Kbytes
[4294672.416000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[4294672.416000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294672.416000] TCP: Hash tables configured (established 16384 bind 16384)
[4294672.416000] NET: Registered protocol family 8
[4294672.416000] NET: Registered protocol family 20
[4294672.416000] ACPI wakeup devices:
[4294672.416000] SLPB PCI0 USB0 USB1 USB2 AC97 UAR1
[4294672.416000] ACPI: (supports S0 S1 S4 S5)
[4294672.417000] Freeing unused kernel memory: 224k freed
[4294672.479000] Capability LSM initialized
[4294672.504000] NET: Registered protocol family 1
[4294672.529000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294672.529000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.529000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[4294672.529000] ACPI: bus type ide registered
[4294672.539000] VP_IDE: IDE controller at PCI slot 0000:00:11.1
[4294672.539000] PCI: Via IRQ fixup for 0000:00:11.1, from 255 to 0
[4294672.539000] VP_IDE: chipset revision 6
[4294672.539000] VP_IDE: not 100% native mode: will probe irqs later
[4294672.539000] VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on
pci0000:00:11.1
[4294672.539000]     ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
[4294672.539000]     ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
[4294672.539000] Probing IDE interface ide0...
[4294672.923000] hda: Maxtor 51536H2, ATA DISK drive
[4294673.331000] hdb: PLEXTOR DVDR PX-708A, ATAPI CD/DVD-ROM drive
[4294673.382000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294673.382000] Probing IDE interface ide1...
[4294673.766000] hdc: WDC WD2000JB-00GVA0, ATA DISK drive
[4294674.021000] hdd: Maxtor 6Y200P0, ATA DISK drive
[4294674.074000] ide1 at 0x170-0x177,0x376 on irq 15
[4294674.075000] Probing IDE interface ide2...
[4294674.588000] Probing IDE interface ide3...
[4294675.100000] Probing IDE interface ide4...
[4294675.612000] Probing IDE interface ide5...
[4294676.131000] hda: max request size: 128KiB
[4294676.147000] hda: 29888820 sectors (15303 MB) w/2048KiB Cache,
CHS=29651/16/63, UDMA(100)
[4294676.147000] hda: cache flushes not supported
[4294676.147000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 >
[4294676.176000] hdc: max request size: 1024KiB
[4294676.197000] hdc: 390721968 sectors (200049 MB) w/8192KiB Cache,
CHS=24321/255/63, UDMA(100)
[4294676.199000] hdc: cache flushes supported
[4294676.199000]  /dev/ide/host0/bus1/target0/lun0: p1
[4294676.210000] hdd: max request size: 1024KiB
[4294676.228000] hdd: 398297088 sectors (203928 MB) w/7936KiB Cache,
CHS=24792/255/63, UDMA(100)
[4294676.228000] hdd: cache flushes supported
[4294676.228000]  /dev/ide/host0/bus1/target1/lun0: p1 p2 < p5 >
[4294676.254000] hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[4294676.254000] Uniform CD-ROM driver Revision: 3.20
[4294676.254000] hdb: packet command error: status=0x51 { DriveReady
SeekComplete Error }
[4294676.254000] hdb: packet command error: error=0x44 { AbortedCommand
LastFailedSense=0x04 }
[4294676.254000] ide: failed opcode was: unknown
[4294676.254000] ATAPI device hdb:
[4294676.254000]   Error: Hardware error -- (Sense key=0x04)
[4294676.254000]   Tracking servo failure -- (asc=0x09, ascq=0x01)
[4294676.254000]   The failed "Read Cd/Dvd Capacity" packet command was:
[4294676.254000]   "25 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 "
[4294676.304000] r8169 Gigabit Ethernet driver 2.2LK loaded
[4294676.305000] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12
[4294676.305000] PCI: setting IRQ 12 as level-triggered
[4294676.305000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 12
(level, low) -> IRQ 12
[4294676.306000] eth0: Identified chip type is 'RTL8169s/8110s'.
[4294676.306000] eth0: RTL8169 at 0xd0850000, 00:09:5b:e0:ff:c0, IRQ 12
[4294676.383000] PDC20265: IDE controller at PCI slot 0000:00:10.0
[4294676.383000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294676.384000] PCI: setting IRQ 11 as level-triggered
[4294676.384000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294676.384000] PDC20265: chipset revision 2
[4294676.384000] PDC20265: 100% native mode on irq 11
[4294676.384000] PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary
PCI Mode.
[4294676.384000] PDC20265: FORCING BURST BIT 0x00->0x01 ACTIVE
[4294676.384000]     ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:DMA
[4294676.384000]     ide3: BM-DMA at 0xd408-0xd40f, BIOS settings: hdg:DMA, hdh:pio
[4294676.384000] Probing IDE interface ide2...
[4294676.903000] Probing IDE interface ide3...
[4294677.467000] usbcore: registered new driver usbfs
[4294677.467000] usbcore: registered new driver hub
[4294677.468000] USB Universal Host Controller Interface driver v2.2
[4294677.468000] ACPI: PCI Interrupt 0000:00:11.2[D] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294677.469000] uhci_hcd 0000:00:11.2: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller
[4294677.531000] uhci_hcd 0000:00:11.2: new USB bus registered, assigned bus
number 1
[4294677.531000] uhci_hcd 0000:00:11.2: irq 11, io base 0x0000dc00
[4294677.531000] hub 1-0:1.0: USB hub found
[4294677.531000] hub 1-0:1.0: 2 ports detected
[4294677.534000] ACPI: PCI Interrupt 0000:00:11.3[D] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294677.534000] uhci_hcd 0000:00:11.3: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (#2)
[4294677.596000] uhci_hcd 0000:00:11.3: new USB bus registered, assigned bus
number 2
[4294677.596000] uhci_hcd 0000:00:11.3: irq 11, io base 0x0000e000
[4294677.596000] hub 2-0:1.0: USB hub found
[4294677.596000] hub 2-0:1.0: 2 ports detected
[4294677.599000] ACPI: PCI Interrupt 0000:00:11.4[D] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294677.599000] uhci_hcd 0000:00:11.4: VIA Technologies, Inc. VT82xxxxx UHCI
USB 1.1 Controller (#3)
[4294677.661000] uhci_hcd 0000:00:11.4: new USB bus registered, assigned bus
number 3
[4294677.661000] uhci_hcd 0000:00:11.4: irq 11, io base 0x0000e400
[4294677.661000] hub 3-0:1.0: USB hub found
[4294677.661000] hub 3-0:1.0: 2 ports detected
[4294680.366000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294680.366000] ACPI: Processor [CPU0] (supports 2 throttling states)
[4294680.545000] kjournald starting.  Commit interval 5 seconds
[4294680.545000] EXT3-fs: mounted filesystem with ordered data mode.
[4294681.991000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294686.045000] Adding 642560k swap on /dev/hda5.  Priority:-1 extents:1
[4294686.209000] EXT3 FS on hda1, internal journal
[4294693.552000] parport: PnPBIOS parport detected.
[4294693.552000] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[4294693.643000] lp0: using parport0 (interrupt-driven).
[4294693.712000] mice: PS/2 mouse device common for all mice
[4294696.748000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[4294697.636000] cdrom: open failed.
[4294698.202000] kjournald starting.  Commit interval 5 seconds
[4294698.202000] EXT3-fs warning: mounting unchecked fs, running e2fsck is
recommended
[4294698.203000] EXT3 FS on hdc1, internal journal
[4294698.203000] EXT3-fs: mounted filesystem with ordered data mode.
[4294698.233000] ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
[4294702.927000] ReiserFS: hdd1: using ordered data mode
[4294702.943000] ReiserFS: hdd1: journal params: device hdd1, size 8192, journal
first block 18, max trans len 1024, max batch
 900, max commit age 30, max trans age 30
[4294702.945000] ReiserFS: hdd1: checking transaction log (hdd1)
[4294702.995000] ReiserFS: hdd1: Using r5 hash to sort names
[4294703.091000] EXT2-fs warning: mounting unchecked fs, running e2fsck is
recommended
[4294703.987000] Linux agpgart interface v0.101 (c) Dave Jones
[4294704.003000] agpgart: Detected VIA P4X266 chipset
[4294704.030000] agpgart: AGP aperture is 64M @ 0xe8000000
[4294704.187000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294704.197000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294704.197000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294704.562000] irda_init()
[4294704.562000] NET: Registered protocol family 23
[4294705.464000] via82xx: Assuming DXS channels with 48k fixed sample rate.
[4294705.464000]          Please try dxs_support=5 option
[4294705.464000]          and report if it works on your machine.
[4294705.464000]          For more details, read ALSA-Configuration.txt.
[4294705.464000] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 12
(level, low) -> IRQ 12
[4294705.464000] PCI: Setting latency timer of device 0000:00:11.5 to 64
[4294707.982000] Real Time Clock Driver v1.12
[4294708.081000] input: PC Speaker
[4294708.358000] Floppy drive(s): fd0 is 1.44M
[4294708.373000] FDC 0 is a post-1991 82077
[4294710.686000] r8169: eth0: link up
[4294710.706000] NET: Registered protocol family 17
[4294716.125000] NET: Registered protocol family 10
[4294716.125000] Disabled Privacy Extensions on device c02eb280(lo)
[4294716.125000] IPv6 over IPv4 tunneling driver
[4294726.143000] eth0: no IPv6 routers present
(END)

-- 
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.