[Bug 20874] New: Problem with Twinhan 1020a after upgrading from breezy to dapper
bugzilla-daemon at bugzilla.ubuntu.com
bugzilla-daemon at bugzilla.ubuntu.com
Mon Dec 12 07:06:12 UTC 2005
Please do not reply to this email. You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=20874
Ubuntu | linux
Summary: Problem with Twinhan 1020a after upgrading from breezy
to dapper
Product: Ubuntu
Version: unspecified
Platform: i386
OS/Version: Linux
Status: UNCONFIRMED
Severity: normal
Priority: P2
Component: linux
AssignedTo: ben.collins at ubuntu.com
ReportedBy: bryanj0207 at hotmail.com
QAContact: kernel-bugs at lists.ubuntu.com
Please help. I updated from breezy kernel 2.6.12-10-386 to latest dapper by way
of updating to dapper sources then apt-get update && apt-get dist-upgrade. After
upgrade, I was still able to use the twinhan card and drivers were working.
After rebooting into new dapper kernel, I cannot access the device. Am attaching
lsmod, lspci, and dmesg.
lsmod
Module Size Used by
isofs 37688 1
udf 88452 0
rfcomm 39704 0
l2cap 26372 5 rfcomm
bluetooth 49508 4 rfcomm,l2cap
cpufreq_userspace 4696 0
cpufreq_stats 5636 0
freq_table 4740 1 cpufreq_stats
cpufreq_powersave 1920 0
cpufreq_ondemand 6428 0
cpufreq_conservative 7332 0
video 16260 0
pcc_acpi 11136 0
hotkey 11556 0
button 6672 0
battery 9732 0
container 4608 0
ac 4996 0
ipv6 264320 12
rsrc_nonstatic 13440 0
pcmcia_core 42640 1 rsrc_nonstatic
af_packet 23176 2
nls_cp437 5888 3
ntfs 103536 2
usbhid 38624 0
dm_mod 58936 1
ide_disk 17664 0
via82cxxx 9988 0 [permanent]
snd_bt87x 14664 0
dvb_bt8xx 15236 0
nxt6000 7684 1 dvb_bt8xx
mt352 6788 1 dvb_bt8xx
dvb_pll 11012 1 dvb_bt8xx
sp887x 7684 1 dvb_bt8xx
dst_ca 13696 1 dvb_bt8xx
dst 23300 2 dvb_bt8xx,dst_ca
dvb_core 82856 2 dvb_bt8xx,dst_ca
cx24110 7940 1 dvb_bt8xx
or51211 9988 1 dvb_bt8xx
lgdt330x 8092 1 dvb_bt8xx
sr_mod 16932 0
sbp2 23044 0
parport_pc 35780 0
lp 11844 0
parport 36040 2 parport_pc,lp
bt878 10552 2 dvb_bt8xx,dst
tuner 42276 0
ohci1394 34864 0
ieee1394 299576 2 sbp2,ohci1394
bttv 164304 2 dvb_bt8xx,bt878
video_buf 22148 1 bttv
i2c_algo_bit 9608 1 bttv
v4l2_common 6016 1 bttv
btcx_risc 5128 1 bttv
tveeprom 15248 1 bttv
videodev 9856 1 bttv
forcedeth 23556 0
snd_intel8x0 33436 1
snd_ac97_codec 92448 1 snd_intel8x0
snd_ac97_bus 2304 1 snd_ac97_codec
snd_pcm_oss 53664 0
snd_mixer_oss 18688 1 snd_pcm_oss
snd_pcm 89736 4 snd_bt87x,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
nvidia 3711976 12
pcspkr 2180 0
rtc 13492 0
uhci_hcd 33680 0
snd_timer 25220 1 snd_pcm
ehci_hcd 34696 0
psmouse 36100 0
serio_raw 7300 0
i2c_nforce2 6912 0
ohci_hcd 21892 0
snd 55268 9
snd_bt87x,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
soundcore 10208 1 snd
usbcore 129540 5 usbhid,uhci_hcd,ehci_hcd,ohci_hcd
i2c_core 21904 13
dvb_bt8xx,nxt6000,mt352,sp887x,dst,cx24110,or51211,lgdt330x,tuner,bttv,i2c_algo_bit,tveeprom,i2c_nforce2
snd_page_alloc 10632 3 snd_bt87x,snd_intel8x0,snd_pcm
shpchp 45632 0
pci_hotplug 29236 1 shpchp
amd64_agp 12356 1
agpgart 34888 2 nvidia,amd64_agp
evdev 9856 0
md_mod 72404 0
ext3 135688 1
jbd 58772 1 ext3
ide_generic 1536 0
sd_mod 19856 6
ide_cd 41348 1
cdrom 38560 2 sr_mod,ide_cd
sata_nv 9860 8
libata 64008 1 sata_nv
scsi_mod 138216 4 sr_mod,sbp2,sd_mod,libata
generic 5124 0
amd74xx 15132 0 [permanent]
ide_core 141140 6
ide_disk,via82cxxx,ide_generic,ide_cd,generic,amd74xx
thermal 13576 0
processor 23360 1 thermal
fan 4868 0
unix 28976 617
capability 5000 0
commoncap 7296 1 capability
vga16fb 13448 1
cfbcopyarea 3968 1 vga16fb
vgastate 10368 1 vga16fb
cfbimgblt 3200 1 vga16fb
cfbfillrect 4352 1 vga16fb
fbcon 42528 72
tileblit 2816 1 fbcon
font 8320 1 fbcon
bitblit 6272 1 fbcon
softcursor 2304 1 bitblit
....................
lspci
0000:00:00.0 Host bridge: nVidia Corporation nForce3 250Gb Host Bridge (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce3 250Gb LPC Bridge (rev a2)
0000:00:01.1 SMBus: nVidia Corporation nForce 250Gb PCI System Management (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
0000:00:02.1 USB Controller: nVidia Corporation CK8S USB Controller (rev a1)
0000:00:02.2 USB Controller: nVidia Corporation nForce3 EHCI USB 2.0 Controller
(rev a2)
0000:00:05.0 Bridge: nVidia Corporation CK8S Ethernet Controller (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97
Audio Controller (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation CK8S Parallel ATA Controller
(v2.5) (rev a2)
0000:00:09.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5)
(rev a2)
0000:00:0a.0 IDE interface: nVidia Corporation CK8S Serial ATA Controller (v2.5)
(rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation nForce3 250Gb AGP Host to PCI Bridge
(rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation nForce3 250Gb PCI-to-PCI Bridge (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Address Map
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
DRAM Controller
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX
5500] (rev a1)
0000:02:07.0 Multimedia video controller: Internext Compression Inc iTVC16
(CX23416) MPEG-2 Encoder (rev 01)
0000:02:08.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
0000:02:08.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 61)
0000:02:08.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 63)
0000:02:08.3 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host
Controller (rev 46)
0000:02:09.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:02:09.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
..............................
dmesg
rimary device added
[17179575.140000] nv_sata: Primary device removed
[17179575.140000] nv_sata: Secondary device added
[17179575.140000] nv_sata: Secondary device removed
[17179575.140000] ata1: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69
86:3e01 87:4063 88:407f
[17179575.140000] ata1: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[17179575.140000] ata1: dev 0 configured for UDMA/133
[17179575.140000] scsi0 : sata_nv
[17179575.344000] ata2: SATA link up 1.5 Gbps (SStatus 113)
[17179575.500000] ata2: dev 0 cfg 49:2f00 82:7c6b 83:7f09 84:4063 85:7c69
86:3e01 87:4063 88:407f
[17179575.500000] ata2: dev 0 ATA-7, max UDMA/133, 398297088 sectors: LBA48
[17179575.500000] ata2: dev 0 configured for UDMA/133
[17179575.500000] scsi1 : sata_nv
[17179575.500000] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
[17179575.500000] Type: Direct-Access ANSI SCSI
revision: 05
[17179575.500000] Vendor: ATA Model: Maxtor 6B200M0 Rev: BANC
[17179575.500000] Type: Direct-Access ANSI SCSI
revision: 05
[17179575.500000] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[17179575.500000] ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APSJ] -> GSI 22
(level, high) -> IRQ 185
[17179575.500000] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[17179575.500000] ata3: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE400 irq 185
[17179575.500000] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE408 irq 185
[17179575.704000] ata3: SATA link down (SStatus 0)
[17179575.704000] scsi2 : sata_nv
[17179575.908000] ata4: SATA link down (SStatus 0)
[17179575.908000] scsi3 : sata_nv
[17179575.924000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[17179575.924000] SCSI device sda: drive cache: write back
[17179575.928000] SCSI device sda: 398297088 512-byte hdwr sectors (203928 MB)
[17179575.928000] hda: ATAPI 63X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
[17179575.928000] Uniform CD-ROM driver Revision: 3.20
[17179575.928000] SCSI device sda: drive cache: write back
[17179575.928000] sda: sda1 sda2 sda3 < sda5 >
[17179575.968000] sd 0:0:0:0: Attached scsi disk sda
[17179575.968000] SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
[17179575.972000] SCSI device sdb: drive cache: write back
[17179575.976000] SCSI device sdb: 398297088 512-byte hdwr sectors (203928 MB)
[17179575.980000] SCSI device sdb: drive cache: write back
[17179575.980000] sdb: sdb1
[17179575.984000] sd 1:0:0:0: Attached scsi disk sdb
[17179576.044000] Probing IDE interface ide1...
[17179576.764000] Attempting manual resume
[17179576.772000] EXT3-fs: INFO: recovery required on readonly filesystem.
[17179576.772000] EXT3-fs: write access will be enabled during recovery.
[17179577.044000] EXT3-fs: recovery complete.
[17179577.044000] kjournald starting. Commit interval 5 seconds
[17179577.044000] EXT3-fs: mounted filesystem with ordered data mode.
[17179578.392000] md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
[17179578.392000] md: bitmap version 4.39
[17179580.812000] Adding 1244996k swap on /dev/sda5. Priority:-1 extents:1
across:1244996k
[17179581.052000] EXT3 FS on sda2, internal journal
[17179582.292000] Linux agpgart interface v0.101 (c) Dave Jones
[17179582.296000] agpgart: Detected AGP bridge 0
[17179582.296000] agpgart: Setting up Nforce3 AGP.
[17179582.300000] agpgart: AGP aperture is 128M @ 0xd0000000
[17179582.488000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[17179582.500000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[17179582.544000] usbcore: registered new driver usbfs
[17179582.544000] usbcore: registered new driver hub
[17179582.576000] ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[17179582.576000] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 21
[17179582.576000] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 21
(level, high) -> IRQ 193
[17179582.576000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[17179582.576000] ohci_hcd 0000:00:02.0: OHCI Host Controller
[17179582.576000] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[17179582.576000] ohci_hcd 0000:00:02.0: irq 193, io mem 0xe3002000
[17179582.584000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[17179582.584000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[17179582.632000] hub 1-0:1.0: USB hub found
[17179582.632000] hub 1-0:1.0: 4 ports detected
[17179582.736000] ACPI: PCI Interrupt Link [APCG] enabled at IRQ 20
[17179582.736000] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCG] -> GSI 20
(level, high) -> IRQ 201
[17179582.736000] PCI: Setting latency timer of device 0000:00:02.1 to 64
[17179582.736000] ohci_hcd 0000:00:02.1: OHCI Host Controller
[17179582.736000] ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
[17179582.736000] ohci_hcd 0000:00:02.1: irq 201, io mem 0xe3003000
[17179582.792000] hub 2-0:1.0: USB hub found
[17179582.792000] hub 2-0:1.0: 4 ports detected
[17179582.876000] USB Universal Host Controller Interface driver v2.3
[17179582.912000] Real Time Clock Driver v1.12
[17179582.912000] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[17179582.912000] ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 209
[17179582.912000] PCI: Via IRQ fixup for 0000:02:08.0, from 10 to 1
[17179582.912000] uhci_hcd 0000:02:08.0: UHCI Host Controller
[17179582.912000] uhci_hcd 0000:02:08.0: new USB bus registered, assigned bus
number 3
[17179582.912000] uhci_hcd 0000:02:08.0: irq 209, io base 0x00009000
[17179582.912000] hub 3-0:1.0: USB hub found
[17179582.912000] hub 3-0:1.0: 2 ports detected
[17179582.912000] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 23
[17179582.912000] ACPI: PCI Interrupt 0000:00:02.2[C] -> Link [APCL] -> GSI 23
(level, high) -> IRQ 177
[17179582.912000] PCI: Setting latency timer of device 0000:00:02.2 to 64
[17179582.912000] ehci_hcd 0000:00:02.2: EHCI Host Controller
[17179582.912000] ehci_hcd 0000:00:02.2: debug port 1
[17179582.912000] PCI: cache line size of 64 is not supported by device 0000:00:02.2
[17179582.920000] input: PC Speaker as /class/input/input0
[17179582.936000] nvidia: module license 'NVIDIA' taints kernel.
[17179582.992000] usb 1-4: new low speed USB device using ohci_hcd and address
2[17179583.016000] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[17179583.016000] ACPI: PCI Interrupt 0000:02:08.1[B] -> Link [APC4] -> GSI 19
(level, low) -> IRQ 217
[17179583.016000] PCI: Via IRQ fixup for 0000:02:08.1, from 4 to 9
[17179583.016000] uhci_hcd 0000:02:08.1: UHCI Host Controller
[17179583.016000] uhci_hcd 0000:02:08.1: new USB bus registered, assigned bus
number 4
[17179583.016000] uhci_hcd 0000:02:08.1: irq 217, io base 0x00009400
[17179583.016000] hub 4-0:1.0: USB hub found
[17179583.016000] hub 4-0:1.0: 2 ports detected
[17179583.060000] forcedeth.c: Reverse Engineered nForce ethernet driver.
Version 0.47.
[17179583.064000] Linux video capture interface: v1.00
[17179583.092000] bttv: driver version 0.9.16 loaded
[17179583.092000] bttv: using 8 buffers with 2080k (520 pages) each for capture
[17179583.120000] ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus
number 5
[17179583.120000] ehci_hcd 0000:00:02.2: irq 177, io mem 0xe3004000
[17179583.120000] ehci_hcd 0000:00:02.2: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[17179583.120000] hub 5-0:1.0: USB hub found
[17179583.120000] hub 5-0:1.0: 8 ports detected
[17179583.224000] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[17179583.224000] ACPI: PCI Interrupt 0000:02:08.2[C] -> Link [APC1] -> GSI 16
(level, low) -> IRQ 225
[17179583.224000] PCI: Via IRQ fixup for 0000:02:08.2, from 7 to 1
[17179583.224000] ehci_hcd 0000:02:08.2: EHCI Host Controller
[17179583.224000] ehci_hcd 0000:02:08.2: new USB bus registered, assigned bus
number 6
[17179583.224000] ehci_hcd 0000:02:08.2: irq 225, io mem 0xe2000000
[17179583.224000] ehci_hcd 0000:02:08.2: USB 2.0 started, EHCI 1.00, driver 10
Dec 2004
[17179583.224000] hub 6-0:1.0: USB hub found
[17179583.224000] hub 6-0:1.0: 4 ports detected
[17179583.224000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC1] -> GSI 16
(level, low) -> IRQ 225
[17179583.224000] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[17179583.224000] ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [APCJ] -> GSI 22
(level, high) -> IRQ 185
[17179583.224000] PCI: Setting latency timer of device 0000:00:06.0 to 64
[17179583.224000] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
[17179583.224000] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APCH] -> GSI 21
(level, high) -> IRQ 193
[17179583.224000] PCI: Setting latency timer of device 0000:00:05.0 to 64
[17179583.256000] ieee1394: Initialized config rom entry `ip1394'
[17179583.328000] NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7676
Fri Jul 29 12:58:54 PDT 2005
[17179583.528000] usb 1-4: device not accepting address 2, error -110
[17179583.544000] intel8x0_measure_ac97_clock: measured 54699 usecs
[17179583.544000] intel8x0: clocking to 46885
[17179583.744000] eth0: forcedeth.c: subsystem: 01462:0300 bound to
0000:00:05.0[17179583.744000] bttv: Bt8xx card found (0).
[17179583.744000] ACPI: PCI Interrupt 0000:02:09.0[A] -> Link [APC4] -> GSI 19
(level, low) -> IRQ 217
[17179583.744000] bttv0: Bt878 (rev 17) at 0000:02:09.0, irq: 217, latency: 32,
mmio: 0xdc000000
[17179583.744000] bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI
subsystem ID is 1822:0001
[17179583.744000] bttv0: using: Twinhan DST + clones [card=113,autodetected]
[17179583.744000] bttv0: gpio: en=00000000, out=00000000 in=00f42dfe [init]
[17179583.744000] bttv0: using tuner=4
[17179583.752000] ACPI: PCI Interrupt 0000:02:08.3[A] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 209
[17179583.752000] PCI: Via IRQ fixup for 0000:02:08.3, from 10 to 1
[17179583.772000] bttv0: add subdevice "dvb0"
[17179583.804000] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209]
MMIO=[e2001000-e20017ff] Max Packet=[2048]
[17179583.812000] bt878: AUDIO driver version 0.0.0 loaded
[17179583.812000] bt878: Bt878 AUDIO function found (0).
[17179583.812000] ACPI: PCI Interrupt 0000:02:09.1[A] -> Link [APC4] -> GSI 19
(level, low) -> IRQ 217
[17179583.812000] bt878(0): Bt878 (rev 17) at 02:09.1, irq: 217, latency: 32,
memory: 0xdc001000
[17179584.436000] lp: driver loaded but no devices found
[17179584.500000] ieee1394: sbp2: Driver forced to serialize I/O (serialize_io=1)
[17179584.500000] ieee1394: sbp2: Try serialize_io=0 for better performance
[17179584.596000] DVB: registering new adapter (bttv0).
[17179584.868000] dst_get_device_id: Recognise [DST-03T]
[17179584.868000]
[17179584.868000] DST type flags : 0x2 ts204 0x4 symdiv 0x10 firmware version = 2
[17179584.904000] dst_get_mac: MAC Address=[00:08:ca:12:b3:00]
[17179584.904000] DVB: registering frontend 0 (DST DVB-S)...
[17179585.032000] ohci_hcd 0000:00:02.1: wakeup
[17179585.136000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[001106664566ad05]
[17179585.368000] usb 2-3: new low speed USB device using ohci_hcd and address
2[17179585.504000] usb 2-3: device descriptor read/64, error -110
[17179585.740000] usb 2-3: device descriptor read/64, error -110
[17179585.972000] usb 2-3: new low speed USB device using ohci_hcd and address
3[17179586.104000] usb 2-3: device descriptor read/64, error -110
[17179586.340000] usb 2-3: device descriptor read/64, error -110
[17179586.572000] usb 2-3: new low speed USB device using ohci_hcd and address
4[17179586.980000] usb 2-3: device not accepting address 4, error -110
[17179587.108000] usb 2-3: new low speed USB device using ohci_hcd and address
5[17179587.516000] usb 2-3: device not accepting address 5, error -110
[17179587.772000] usb 2-4: new full speed USB device using ohci_hcd and address 6
[17179587.868000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[17179587.940000] ohci_hcd 0000:00:02.0: wakeup
[17179588.276000] usb 1-4: new low speed USB device using ohci_hcd and address
4[17179588.488000] usbcore: registered new driver hiddev
[17179588.500000] input: ??\uffff???? ?????????????????????????????? as
/class/input/input1
[17179588.500000] input: USB HID v1.00 Keyboard [??\uffff????
??????????????????????????????] on usb-0000:00:02.0-4
[17179588.520000] input: ??\uffff???? ?????????????????????????????? as
/class/input/input2
[17179588.520000] input,hiddev96: USB HID v1.00 Mouse [??\uffff????
??????????????????????????????] on usb-0000:00:02.0-4
[17179588.520000] usbcore: registered new driver usbhid
[17179588.520000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[17179589.340000] NTFS driver 2.1.25 [Flags: R/O MODULE].
[17179589.396000] NTFS volume version 3.1.
[17179589.412000] NTFS volume version 3.1.
[17179591.968000] NET: Registered protocol family 17
[17179595.064000] Intel ISA PCIC probe: not found.
[17179596.000000] NET: Registered protocol family 10
[17179596.000000] Disabled Privacy Extensions on device c032c9a0(lo)
[17179596.000000] IPv6 over IPv4 tunneling driver
[17179597.468000] ACPI: Power Button (FF) [PWRF]
[17179597.468000] ACPI: Power Button (CM) [PWRB]
[17179597.516000] ibm_acpi: ec object not found
[17179606.220000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179606.220000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179606.220000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179606.480000] eth0: no IPv6 routers present
[17179606.568000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[17179606.568000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[17179606.568000] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
[17179606.728000] Xorg does an incomplete pfn remapping [<c014e724>]
incomplete_pfn_remap+0x64/0xd0
[17179606.728000] [<f90ee02d>] nv_kern_mmap+0x4dc/0x52a [nvidia]
[17179606.728000] [<c01519c9>] do_mmap_pgoff+0x5b9/0x770
[17179606.728000] [<c01090ef>] sys_mmap2+0x4f/0xa0
[17179606.728000] [<c010302b>] sysenter_past_esp+0x54/0x79
[17179606.784000] Xorg does an incomplete pfn remapping [<c014e724>]
incomplete_pfn_remap+0x64/0xd0
[17179606.784000] [<f90ee02d>] nv_kern_mmap+0x4dc/0x52a [nvidia]
[17179606.784000] [<c01519c9>] do_mmap_pgoff+0x5b9/0x770
[17179606.784000] [<c01090ef>] sys_mmap2+0x4f/0xa0
[17179606.784000] [<c010302b>] sysenter_past_esp+0x54/0x79
[17179608.008000] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[17179608.008000] apm: overridden by ACPI.
[17179608.364000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[17179608.364000] hda: drive_cmd: error=0x04 { AbortedCommand }
[17179608.364000] ide: failed opcode was: 0xec
[17179608.508000] hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
[17179608.508000] hda: drive_cmd: error=0x04 { AbortedCommand }
[17179608.508000] ide: failed opcode was: 0xec
[17179609.316000] powernow-k8: Found 1 AMD Athlon 64 / Opteron processors
(version 1.50.4)
[17179609.332000] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[17179610.808000] Bluetooth: Core ver 2.8
[17179610.808000] NET: Registered protocol family 31
[17179610.808000] Bluetooth: HCI device and connection manager initialized
[17179610.808000] Bluetooth: HCI socket layer initialized
[17179610.848000] Bluetooth: L2CAP ver 2.8
[17179610.848000] Bluetooth: L2CAP socket layer initialized
[17179610.848000] Bluetooth: RFCOMM socket layer initialized
[17179610.848000] Bluetooth: RFCOMM TTY layer initialized
[17179610.848000] Bluetooth: RFCOMM ver 1.6
[17179629.180000] ISO 9660 Extensions: Microsoft Joliet Level 3
[17179629.180000] ISOFS: changing to secondary root
Please let me know what to do. Thanks, Jerry
--
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
More information about the kernel-bugs
mailing list