[Bug 14117] cpufreq: change failed
bugzilla-daemon at bugzilla.ubuntu.com
bugzilla-daemon at bugzilla.ubuntu.com
Thu Aug 25 23:01:25 UTC 2005
Please do not reply to this email. You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=14117
Ubuntu (laptop) | linux
------- Additional Comments From miffe-miffe at telia.com 2005-08-26 00:01 UTC -------
(In reply to comment #1)
> Could you please provide the output of
>
> cat /proc/cpuinfo
processor : 0
vendor_id : GenuineIntel
cpu family : 6
model : 8
model name : Pentium III (Coppermine)
stepping : 6
cpu MHz : 498.466
cache size : 256 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 2
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov pat
pse36 mmx fxsr sse
bogomips : 989.34
>
> and dmesg?
00] vga16fb: initializing
[4294671.900000] vga16fb: mapped to 0xc00a0000
[4294671.901000] fb0: VGA16 VGA frame buffer device
[4294672.024000] Console: switching to colour frame buffer device 80x30
[4294672.037000] Capability LSM initialized
[4294672.184000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294672.184000] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[4294672.184000] ACPI: bus type ide registered
[4294672.216000] usbcore: registered new driver usbfs
[4294672.216000] usbcore: registered new driver hub
[4294672.220000] USB Universal Host Controller Interface driver v2.2
[4294672.221000] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[4294672.221000] PCI: setting IRQ 11 as level-triggered
[4294672.221000] ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294672.221000] uhci_hcd 0000:00:07.2: Intel Corporation 82371AB/EB/MB PIIX4 USB
[4294672.283000] uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus
number 1
[4294672.283000] uhci_hcd 0000:00:07.2: irq 11, io base 0x0000dce0
[4294672.283000] hub 1-0:1.0: USB hub found
[4294672.283000] hub 1-0:1.0: 2 ports detected
[4294674.375000] PIIX4: IDE controller at PCI slot 0000:00:07.1
[4294674.375000] PIIX4: chipset revision 1
[4294674.375000] PIIX4: not 100% native mode: will probe irqs later
[4294674.375000] ide0: BM-DMA at 0x0860-0x0867, BIOS settings: hda:DMA, hdb:pio
[4294674.375000] ide1: BM-DMA at 0x0868-0x086f, BIOS settings: hdc:DMA, hdd:pio
[4294674.375000] Probing IDE interface ide0...
[4294674.639000] hda: IC25N020ATCS04-0, ATA DISK drive
[4294675.251000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294675.251000] Probing IDE interface ide1...
[4294675.923000] hdc: TEAC CD-ROM CD-224E, ATAPI CD/DVD-ROM drive
[4294676.535000] ide1 at 0x170-0x177,0x376 on irq 15
[4294676.535000] Probing IDE interface ide2...
[4294677.048000] Probing IDE interface ide3...
[4294677.561000] Probing IDE interface ide4...
[4294678.074000] Probing IDE interface ide5...
[4294678.597000] hda: max request size: 128KiB
[4294678.615000] hda: 39070080 sectors (20003 MB) w/1768KiB Cache,
CHS=38760/16/63, UDMA(33)
[4294678.615000] hda: cache flushes not supported
[4294678.615000] /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 > p4
[4294678.678000] hdc: ATAPI 24X CD-ROM drive, 128kB Cache
[4294678.678000] Uniform CD-ROM driver Revision: 3.20
[4294679.405000] ACPI: CPU0 (power states: C1[C1] C2[C2])
[4294679.430000] ACPI: Thermal Zone [THM] (34 C)
[4294679.934000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel at redhat.com
[4294679.977000] hdc: packet command error: status=0x51 { DriveReady
SeekComplete Error }
[4294679.977000] hdc: packet command error: error=0x54 { AbortedCommand
LastFailedSense=0x05 }
[4294679.977000] ide: failed opcode was: unknown
[4294679.978000] cdrom: open failed.
[4294680.056000] Attempting manual resume
[4294680.056000] swsusp: Suspend partition has wrong signature?
[4294680.094000] kjournald starting. Commit interval 5 seconds
[4294680.094000] EXT3-fs: mounted filesystem with ordered data mode.
[4294681.419000] NET: Registered protocol family 1
[4294682.448000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294687.814000] Adding 376952k swap on /dev/hda5. Priority:-1 extents:1
[4294688.088000] EXT3 FS on hda6, internal journal
[4294700.243000] lp: driver loaded but no devices found
[4294700.312000] mice: PS/2 mouse device common for all mice
[4294700.658000] alps.c: Enabling hardware tapping
[4294700.854000] input: DualPoint Stick on isa0060/serio1
[4294700.899000] input: AlpsPS/2 ALPS DualPoint TouchPad on isa0060/serio1
[4294706.200000] hdc: packet command error: status=0x51 { DriveReady
SeekComplete Error }
[4294706.200000] hdc: packet command error: error=0x54 { AbortedCommand
LastFailedSense=0x05 }
[4294706.200000] ide: failed opcode was: unknown
[4294706.201000] cdrom: open failed.
[4294707.227000] kjournald starting. Commit interval 5 seconds
[4294707.228000] EXT3 FS on hda1, internal journal
[4294707.228000] EXT3-fs: mounted filesystem with ordered data mode.
[4294708.695000] Linux agpgart interface v0.101 (c) Dave Jones
[4294708.722000] agpgart: Detected an Intel 440BX Chipset.
[4294708.771000] agpgart: AGP aperture is 64M @ 0xf4000000
[4294708.998000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294709.017000] shpchp: acpi_shpchprm:\_SB_.PCI0 evaluate _BBN fail=0x5
[4294709.017000] shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5
[4294709.257000] Linux Kernel Card Services
[4294709.257000] options: [pci] [cardbus] [pm]
[4294709.297000] PCI: Enabling device 0000:00:03.0 (0000 -> 0002)
[4294709.297000] ACPI: PCI Interrupt 0000:00:03.0[A] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294709.297000] Yenta: CardBus bridge found at 0000:00:03.0 [1028:00bb]
[4294709.297000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294709.297000] Yenta: Routing CardBus interrupts to PCI
[4294709.297000] Yenta TI: socket 0000:00:03.0, mfunc 0x01261222, devctl 0x66
[4294709.518000] Yenta: ISA IRQ mask 0x04f8, PCI irq 11
[4294709.518000] Socket status: 30000010
[4294709.561000] PCI: Enabling device 0000:00:03.1 (0000 -> 0002)
[4294709.561000] ACPI: PCI Interrupt 0000:00:03.1[A] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[4294709.561000] Yenta: CardBus bridge found at 0000:00:03.1 [1028:00bb]
[4294709.561000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294709.561000] Yenta: Routing CardBus interrupts to PCI
[4294709.561000] Yenta TI: socket 0000:00:03.1, mfunc 0x01261222, devctl 0x66
[4294709.782000] Yenta: ISA IRQ mask 0x04f8, PCI irq 11
[4294709.782000] Socket status: 30000006
[4294710.577000] piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
[4294711.124000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[4294711.124000] PCI: setting IRQ 5 as level-triggered
[4294711.124000] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKB] -> GSI 5
(level, low) -> IRQ 5
[4294713.980000] Real Time Clock Driver v1.12
[4294714.133000] input: PC Speaker
[4294714.578000] FDC 0 is a post-1991 82077
[4294715.419000] ts: Compaq touchscreen protocol output
[4294733.554000] ACPI: AC Adapter [AC] (on-line)
[4294733.795000] ACPI: Battery Slot [BAT0] (battery present)
[4294733.796000] ACPI: Battery Slot [BAT1] (battery absent)
[4294733.857000] ACPI: Lid Switch [LID]
[4294733.857000] ACPI: Power Button (CM) [PBTN]
[4294733.857000] ACPI: Sleep Button (CM) [SBTN]
[4294733.918000] Using specific hotkey driver
[4294734.064000] ibm_acpi: ec object not found
[4294734.376000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[4294734.609000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[4294734.610000] apm: overridden by ACPI.
[4294737.290000] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x280-0x287
[4294737.291000] cs: IO port probe 0x100-0x4ff: excluding 0x200-0x207 0x280-0x287
[4294737.293000] cs: IO port probe 0x800-0x8ff: clean.
[4294737.293000] cs: IO port probe 0x800-0x8ff: clean.
[4294737.294000] cs: IO port probe 0xc00-0xcff: clean.
[4294737.294000] cs: IO port probe 0xc00-0xcff: clean.
[4294737.295000] cs: IO port probe 0xa00-0xaff: clean.
[4294737.295000] cs: IO port probe 0xa00-0xaff: clean.
[4294737.297000] cs: memory probe 0xa0000000-0xa0ffffff: clean.
[4294737.582000] eth0: NE2000 Compatible: io 0x300, irq 3, hw_addr 00:40:F4:3E:75:E5
[4294738.228000] NET: Registered protocol family 17
[4294741.450000] cpufreq: change failed with new_state 1 and result 0
[4294741.450000] cpufreq: change failed with new_state 0 and result 0
[4294743.671000] Bluetooth: Core ver 2.7
[4294743.671000] NET: Registered protocol family 31
[4294743.671000] Bluetooth: HCI device and connection manager initialized
[4294743.671000] Bluetooth: HCI socket layer initialized
[4294743.766000] Bluetooth: L2CAP ver 2.7
[4294743.766000] Bluetooth: L2CAP socket layer initialized
[4294743.912000] Bluetooth: RFCOMM ver 1.5
[4294743.912000] Bluetooth: RFCOMM socket layer initialized
[4294743.912000] Bluetooth: RFCOMM TTY layer initialized
[4294749.784000] cpufreq: change failed with new_state 1 and result 0
[4294760.461000] NET: Registered protocol family 10
[4294760.461000] Disabled Privacy Extensions on device c031eb40(lo)
[4294760.462000] IPv6 over IPv4 tunneling driver
[4294770.470000] eth0: no IPv6 routers present
[4294794.473000] cpufreq: change failed with new_state 0 and result 0
[4294800.564000] cpufreq: change failed with new_state 1 and result 0
[4294806.501000] cpufreq: change failed with new_state 0 and result 0
[4294812.482000] cpufreq: change failed with new_state 1 and result 0
[4294834.071000] cpufreq: change failed with new_state 0 and result 0
[4294836.033000] cpufreq: change failed with new_state 1 and result 0
[4294840.069000] cpufreq: change failed with new_state 0 and result 0
[4294870.514000] cpufreq: change failed with new_state 1 and result 0
[4294873.964000] cpufreq: change failed with new_state 0 and result 0
[4294879.012000] cpufreq: change failed with new_state 1 and result 0
[4294882.679000] cpufreq: change failed with new_state 0 and result 0
[4294891.917000] cpufreq: change failed with new_state 1 and result 0
[4294907.008000] cpufreq: change failed with new_state 0 and result 0
[4294943.684000] cpufreq: change failed with new_state 1 and result 0
[4294955.871000] cpufreq: change failed with new_state 0 and result 0
[4294969.450000] cpufreq: change failed with new_state 1 and result 0
[4294974.448000] video bus notify
[4294985.870000] cpufreq: change failed with new_state 0 and result 0
[4294988.832000] cpufreq: change failed with new_state 1 and result 0
[4295056.380000] cpufreq: change failed with new_state 0 and result 0
[4295064.031000] cpufreq: change failed with new_state 1 and result 0
[4295077.287000] cpufreq: change failed with new_state 0 and result 0
[4295080.558000] cpufreq: change failed with new_state 1 and result 0
[4295090.563000] video bus notify
[4295094.307000] cpufreq: change failed with new_state 0 and result 0
[4295100.037000] cpufreq: change failed with new_state 1 and result 0
[4295126.943000] cpufreq: change failed with new_state 0 and result 0
[4295134.981000] cpufreq: change failed with new_state 1 and result 0
[4295144.091000] cpufreq: change failed with new_state 0 and result 0
[4295146.049000] cpufreq: change failed with new_state 1 and result 0
[4295151.412000] cpufreq: change failed with new_state 0 and result 0
[4295153.370000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
synchronization, throwing 1 bytes away.
[4295153.370000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
sync at byte 1
[4295153.370000] cpufreq: change failed with new_state 1 and result 0
[4295153.371000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
sync at byte 1
[4295153.374000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 - driver
resynched.
[4295161.643000] cpufreq: change failed with new_state 0 and result 0
[4295166.698000] cpufreq: change failed with new_state 1 and result 0
[4295172.485000] cpufreq: change failed with new_state 0 and result 0
[4295175.445000] cpufreq: change failed with new_state 1 and result 0
[4295181.849000] cpufreq: change failed with new_state 0 and result 0
[4295184.818000] cpufreq: change failed with new_state 1 and result 0
[4295197.399000] cpufreq: change failed with new_state 0 and result 0
[4295201.361000] cpufreq: change failed with new_state 1 and result 0
[4295244.375000] cpufreq: change failed with new_state 0 and result 0
[4295248.673000] cpufreq: change failed with new_state 1 and result 0
[4295271.014000] cpufreq: change failed with new_state 0 and result 0
[4295276.324000] cpufreq: change failed with new_state 1 and result 0
[4295292.155000] cpufreq: change failed with new_state 0 and result 0
[4295294.114000] cpufreq: change failed with new_state 1 and result 0
[4295331.892000] cpufreq: change failed with new_state 0 and result 0
[4295335.034000] cpufreq: change failed with new_state 1 and result 0
[4295373.133000] cpufreq: change failed with new_state 0 and result 0
[4295379.591000] cpufreq: change failed with new_state 1 and result 0
[4295408.784000] cpufreq: change failed with new_state 0 and result 0
[4295414.367000] cpufreq: change failed with new_state 1 and result 0
[4295423.488000] cpufreq: change failed with new_state 0 and result 0
[4295425.446000] cpufreq: change failed with new_state 1 and result 0
[4295433.298000] cpufreq: change failed with new_state 0 and result 0
[4295437.453000] cpufreq: change failed with new_state 1 and result 0
[4295466.643000] Using specific hotkey driver
[4295467.027000] ibm_acpi: ec object not found
[4295490.295000] cpufreq: change failed with new_state 0 and result 0
[4295495.795000] cpufreq: change failed with new_state 1 and result 0
[4295530.076000] cpufreq: change failed with new_state 0 and result 0
[4295538.656000] cpufreq: change failed with new_state 1 and result 0
[4295543.714000] cpufreq: change failed with new_state 0 and result 0
[4295563.181000] cpufreq: change failed with new_state 1 and result 0
[4295565.988000] cpufreq: change failed with new_state 0 and result 0
[4295568.918000] cpufreq: change failed with new_state 1 and result 0
[4295591.804000] cpufreq: change failed with new_state 0 and result 0
[4295594.838000] cpufreq: change failed with new_state 1 and result 0
[4295625.322000] cpufreq: change failed with new_state 0 and result 0
[4295629.283000] cpufreq: change failed with new_state 1 and result 0
[4295728.147000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
synchronization, throwing 3 bytes away.
[4295728.147000] cpufreq: change failed with new_state 0 and result 0
[4295732.757000] cpufreq: change failed with new_state 1 and result 0
[4295752.086000] cpufreq: change failed with new_state 0 and result 0
[4295756.050000] cpufreq: change failed with new_state 1 and result 0
[4295767.923000] cpufreq: change failed with new_state 0 and result 0
[4295775.337000] cpufreq: change failed with new_state 1 and result 0
[4295795.178000] cpufreq: change failed with new_state 0 and result 0
[4295800.329000] cpufreq: change failed with new_state 1 and result 0
[4295838.049000] cpufreq: change failed with new_state 0 and result 0
[4295844.857000] cpufreq: change failed with new_state 1 and result 0
[4295995.341000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
synchronization, throwing 1 bytes away.
[4295995.341000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
sync at byte 1
[4295995.341000] cpufreq: change failed with new_state 0 and result 0
[4295995.344000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 - driver
resynched.
[4295995.345000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 lost
sync at byte 1
[4295995.353000] psmouse.c: DualPoint TouchPad at isa0060/serio1/input0 - driver
resynched.
[4296019.070000] cpufreq: change failed with new_state 1 and result 0
[4296094.712000] cpufreq: change failed with new_state 0 and result 0
[4296097.686000] cpufreq: change failed with new_state 1 and result 0
[4296122.580000] cpufreq: change failed with new_state 0 and result 0
[4296125.643000] cpufreq: change failed with new_state 1 and result 0
[4296218.128000] cpufreq: change failed with new_state 0 and result 0
[4296222.304000] cpufreq: change failed with new_state 1 and result 0
[4296241.762000] cpufreq: change failed with new_state 0 and result 0
[4296243.735000] cpufreq: change failed with new_state 1 and result 0
[4296255.109000] cpufreq: change failed with new_state 0 and result 0
[4296257.091000] cpufreq: change failed with new_state 1 and result 0
--
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
More information about the kernel-bugs
mailing list