[Bug 8902] New: ATI radeon won't work. At all.
bugzilla-daemon at bugzilla.ubuntu.com
bugzilla-daemon at bugzilla.ubuntu.com
Sun Apr 10 16:49:43 UTC 2005
Please do not reply to this email. You can add comments at
http://bugzilla.ubuntu.com/show_bug.cgi?id=8902
Ubuntu | linux-restricted-modules
Summary: ATI radeon won't work. At all.
Product: Ubuntu
Version: unspecified
Platform: i386
OS/Version: other
Status: NEW
Severity: normal
Priority: P3
Component: linux-restricted-modules
AssignedTo: daniel.stone at ubuntu.com
ReportedBy: the.unforgiven at comcast.net
QAContact: kernel-bugs at lists.ubuntu.com
For some random reason i can not for whatever reason get the ATI drivers to work
with my ATI Radeon 9800 Pro 256Meg modle. I have an Asus A7N8X-d mobo.
here is the output of dmesg, lspci, and lspci -n followed by my Xorg.conf
followed by my glxinfo and after this my /var/log/Xorg.0.log. What baffles me
the most is how my glxinfo dosn't show DRI as being on. That i truly don't
understand.
Any help would be very much appreciated. Thanks and have a great day.
------------
line registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
input: AT Translated Set 2 keyboard on isa0060/serio0
EISA: Probing bus 0 at eisa0
Cannot allocate resource for EISA slot 4
Cannot allocate resource for EISA slot 5
EISA: Detected 0 cards.
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 8
NET: Registered protocol family 20
Restarting tasks...<6> Strange, kswapd0 not stopped
Strange, kseriod not stopped
done
ACPI wakeup devices:
HUB0 HUB1 USB0 USB1 USB2 F139 MMAC MMCI UAR1
ACPI: (supports S0 S1 S4 S4bios S5)
RAMDISK: cramfs filesystem found at block 0
RAMDISK: Loading 4336KiB [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-done.
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 224k freed
NET: Registered protocol family 1
SCSI subsystem initialized
libata version 1.10 loaded.
sata_sil version 0.8
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
ACPI: PCI interrupt 0000:01:0b.0[A] -> GSI 18 (level, high) -> IRQ 18
ata1: SATA max UDMA/100 cmd 0xF882E080 ctl 0xF882E08A bmdma 0xF882E000 irq 18
ata2: SATA max UDMA/100 cmd 0xF882E0C0 ctl 0xF882E0CA bmdma 0xF882E008 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7f21 84:4003 85:3469 86:3c01 87:4003 88:207f
ata1: dev 0 ATA, max UDMA/133, 72303840 sectors: lba48
ata1(0): applying bridge limits
ata1: dev 0 configured for UDMA/100
scsi0 : sata_sil
ata2: dev 0 cfg 49:2f00 82:346b 83:7d01 84:4003 85:3469 86:3c01 87:4003 88:207f
ata2: dev 0 ATA, max UDMA/133, 390721968 sectors: lba48
ata2: dev 0 configured for UDMA/100
scsi1 : sata_sil
elevator: using anticipatory as default io scheduler
Vendor: ATA Model: WDC WD360GD-00FN Rev: 35.0
Type: Direct-Access ANSI SCSI revision: 05
Vendor: ATA Model: ST3200822AS Rev: 3.01
Type: Direct-Access ANSI SCSI revision: 05
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
SCSI device sda: drive cache: write back
/dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sdb: drive cache: write back
SCSI device sdb: 390721968 512-byte hdwr sectors (200050 MB)
SCSI device sdb: drive cache: write back
/dev/scsi/host1/bus0/target0/lun0: p1
Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0
Stopping tasks: ===|
Freeing memory... -\|/done (487 pages freed)
Restarting tasks... done
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
Adding 385520k swap on /dev/sda5. Priority:-1 extents:1
EXT3 FS on sda2, internal journal
Probing IDE interface ide0...
Probing IDE interface ide1...
hdc: PIONEER DVD-RW DVR-104, ATAPI CD/DVD-ROM drive
hdd: PLEXTOR CD-R PX-W4824A, ATAPI CD/DVD-ROM drive
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
ide1 at 0x170-0x177,0x376 on irq 15
hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2000kB Cache
Uniform CD-ROM driver Revision: 3.20
hdd: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
lp0: using parport0 (interrupt-driven).
mice: PS/2 mouse device common for all mice
input: ImExPS/2 Generic Explorer Mouse on isa0060/serio1
ts: Compaq touchscreen protocol output
ieee1394: Initialized config rom entry `ip1394'
sbp2: $Rev: 1219 $ Ben Collins <bcollins at debian.org>
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg,
GERMANY' taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 805 MBytes.
ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
ACPI: PCI interrupt 0000:03:00.0[A] -> GSI 19 (level, high) -> IRQ 19
[fglrx] module loaded - fglrx 8.8.25 [Jan 14 2005] on minor 0
Capability LSM initialized
device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel at redhat.com
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
NTFS driver 2.1.22 [Flags: R/O MODULE].
NTFS volume version 3.1.
NTFS volume version 3.1.
Real Time Clock Driver v1.12
input: PC Speaker
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected NVIDIA nForce2 chipset
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: AGP aperture is 256M @ 0xb0000000
i2c_adapter i2c-0: nForce2 SMBus adapter at 0x5000
i2c_adapter i2c-1: nForce2 SMBus adapter at 0x5500
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:02.0[A] -> GSI 22 (level, high) -> IRQ 22
ohci_hcd 0000:00:02.0: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.0 to 64
ohci_hcd 0000:00:02.0: irq 22, pci mem 0xd7085000
ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt Link [APCG] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:02.1[B] -> GSI 21 (level, high) -> IRQ 21
ohci_hcd 0000:00:02.1: nVidia Corporation nForce2 USB Controller (#2)
PCI: Setting latency timer of device 0000:00:02.1 to 64
ohci_hcd 0000:00:02.1: irq 21, pci mem 0xd7080000
ohci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
usb 1-2: new full speed USB device using ohci_hcd and address 2
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:02.2[C] -> GSI 20 (level, high) -> IRQ 20
ehci_hcd 0000:00:02.2: nVidia Corporation nForce2 USB Controller
PCI: Setting latency timer of device 0000:00:02.2 to 64
ehci_hcd 0000:00:02.2: irq 20, pci mem 0xd7081000
ehci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 3
PCI: cache line size of 64 is not supported by device 0000:00:02.2
ehci_hcd 0000:00:02.2: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 6 ports detected
usb 1-2: device descriptor read/all, error -110
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.30.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 22 (level, high) -> IRQ 22
PCI: Setting latency timer of device 0000:00:04.0 to 64
usb 3-5: new high speed USB device using ehci_hcd and address 3
eth0: forcedeth.c: subsystem: 01043:80a7 bound to 0000:00:04.0
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
ohci_hcd 0000:00:02.1: wakeup
usb 1-2: new full speed USB device using ohci_hcd and address 4
ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 21
ACPI: PCI interrupt 0000:00:06.0[A] -> GSI 21 (level, high) -> IRQ 21
PCI: Setting latency timer of device 0000:00:06.0 to 64
usb 2-3: new full speed USB device using ohci_hcd and address 2
drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 0
proto 2 vid 0x03F0 pid 0x6204
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
intel8x0_measure_ac97_clock: measured 62772 usecs
intel8x0: clocking to 50782
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: HCI USB driver ver 2.7
usbcore: registered new driver hci_usb
cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
NFORCE2: IDE controller at PCI slot 0000:00:09.0
NFORCE2: chipset revision 162
NFORCE2: not 100% native mode: will probe irqs later
NFORCE2: 0000:00:09.0 (rev a2) UDMA133 controller
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
NFORCE2: port 0x0170 already claimed by ide1
Probing IDE interface ide0...
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
ohci1394: $Rev: 1223 $ Ben Collins <bcollins at debian.org>
ACPI: PCI Interrupt Link [APCM] enabled at IRQ 20
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 20 (level, high) -> IRQ 20
PCI: Setting latency timer of device 0000:00:0d.0 to 64
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20] MMIO=[d7083000-d70837ff] Max
Packet=[2048]
Evaluate _OSC Set fails. Status = 0x0005
pciehp: add_host_bridge: status 5
pciehp: Fails to gain control of native hot-plug
Linux video capture interface: v1.00
bttv: driver version 0.9.15 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
ACPI: PCI interrupt 0000:01:0a.0[A] -> GSI 16 (level, high) -> IRQ 16
bttv0: Bt878 (rev 17) at 0000:01:0a.0, irq: 16, latency: 32, mmio: 0xd0000000
bttv0: detected: Hauppauge WinTV [card=10], PCI subsystem ID is 0070:13eb
bttv0: using: Hauppauge (bt878) [card=10,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00ffffdb [init]
bttv0: Hauppauge/Voodoo msp34xx: reset line init [5]
bttv0: Hauppauge eeprom: model=44371, tuner=Philips FM1236 (2), radio=yes
bttv0: using tuner=2
bttv0: i2c: checking for MSP34xx @ 0x80... found
msp34xx: init: chip=MSP3435G-B6 +nicam +simple +simpler +radio mode=simple
msp3410: daemon started
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
tvaudio: TV audio decoder + audio/video mux driver
tvaudio: known chips:
tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54
(PV951),ta8874z
bttv0: i2c: checking for TDA9887 @ 0x86... not found
tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw]
tuner: type set to 2 (Philips NTSC (FI1236,FM1236 and compatibles)) by bt878 #0 [sw]
bttv0: registered device video0
bttv0: registered device vbi0
bttv0: registered device radio0
bttv0: PLL: 28636363 => 35468950 .. ok
ohci1394: fw-host0: SelfID received outside of bus reset sequence
ACPI: PCI interrupt 0000:01:0a.1[A] -> GSI 16 (level, high) -> IRQ 16
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00e0180000416b6a]
ACPI: PCI Interrupt Link [AP3C] enabled at IRQ 22
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 22 (level, high) -> IRQ 22
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
0000:02:01.0: 3Com PCI 3c920 Tornado at 0xc000. Vers LK1.1.19
ACPI: PCI interrupt 0000:02:01.0[A] -> GSI 22 (level, high) -> IRQ 22
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdc: 39063023 512-byte hdwr sectors (20000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 64 00 00 08
sdc: assuming drive cache: write through
SCSI device sdc: 39063023 512-byte hdwr sectors (20000 MB)
sdc: Write Protect is off
sdc: Mode Sense: 64 00 00 08
sdc: assuming drive cache: write through
/dev/scsi/host2/bus0/target0/lun0: p1 p2
Attached scsi removable disk sdc at scsi2, channel 0, id 0, lun 0
usb-storage: device scan complete
NET: Registered protocol family 17
NET: Registered protocol family 10
Disabled Privacy Extensions on device c02f0500(lo)
IPv6 over IPv4 tunneling driver
ACPI: Power Button (FF) [PWRF]
ibm_acpi: ec object not found
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v3 mode
agpgart: AGP aperture is 256M @ 0xb0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 7560 using kernel context 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v3 mode
agpgart: AGP aperture is 256M @ 0xb0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 8688 using kernel context 0
eth1: no IPv6 routers present
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v3 mode
agpgart: AGP aperture is 256M @ 0xb0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 8763 using kernel context 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 816M
agpgart: Detected nVidia nForce2 chipset
agpgart: Bridge device is in AGP v3 mode
agpgart: AGP aperture is 256M @ 0xb0000000
Power management callback for AGP chipset installed
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 8975 using kernel context 0
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 9034 using kernel context 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
allocation failed: out of vmalloc space - use vmalloc=<size> to increase size.
[fglrx] AGP detected, AgpState = 0x00000000 (hardware caps of chipset)
[fglrx:firegl_unlock] *ERROR* Process 9330 using kernel context 0
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will
be case sensitive!
-----------------
0000:00:00.0 Host bridge: nVidia Corporation nForce2 AGP (different version?)
(rev c1)
0000:00:00.1 RAM memory: nVidia Corporation nForce2 Memory Controller 1 (rev c1)
0000:00:00.2 RAM memory: nVidia Corporation nForce2 Memory Controller 4 (rev c1)
0000:00:00.3 RAM memory: nVidia Corporation nForce2 Memory Controller 3 (rev c1)
0000:00:00.4 RAM memory: nVidia Corporation nForce2 Memory Controller 2 (rev c1)
0000:00:00.5 RAM memory: nVidia Corporation nForce2 Memory Controller 5 (rev c1)
0000:00:01.0 ISA bridge: nVidia Corporation nForce2 ISA Bridge (rev a4)
0000:00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
0000:00:02.0 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.1 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:02.2 USB Controller: nVidia Corporation nForce2 USB Controller (rev a4)
0000:00:04.0 Ethernet controller: nVidia Corporation nForce2 Ethernet Controller
(rev a1)
0000:00:05.0 Multimedia audio controller: nVidia Corporation nForce MultiMedia
audio [Via VT82C686B] (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce2 AC97 Audio
Controler (MCP) (rev a1)
0000:00:08.0 PCI bridge: nVidia Corporation nForce2 External PCI Bridge (rev a3)
0000:00:09.0 IDE interface: nVidia Corporation nForce2 IDE (rev a2)
0000:00:0c.0 PCI bridge: nVidia Corporation nForce2 PCI Bridge (rev a3)
0000:00:0d.0 FireWire (IEEE 1394): nVidia Corporation nForce2 FireWire (IEEE
1394) Controller (rev a3)
0000:00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
0000:01:0a.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
0000:01:0a.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
0000:01:0b.0 RAID bus controller: Silicon Image, Inc. (formerly CMD Technology
Inc) SiI 3112 [SATALink/SATARaid] Serial ATA Controller (rev 01)
0000:02:01.0 Ethernet controller: 3Com Corporation 3C920B-EMB Integrated Fast
Ethernet Controller [Tornado] (rev 40)
0000:03:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon
9800 Pro]
0000:03:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800
Pro] (Secondary)
----------------------------
0000:00:00.0 0600: 10de:01e0 (rev c1)
0000:00:00.1 0500: 10de:01eb (rev c1)
0000:00:00.2 0500: 10de:01ee (rev c1)
0000:00:00.3 0500: 10de:01ed (rev c1)
0000:00:00.4 0500: 10de:01ec (rev c1)
0000:00:00.5 0500: 10de:01ef (rev c1)
0000:00:01.0 0601: 10de:0060 (rev a4)
0000:00:01.1 0c05: 10de:0064 (rev a2)
0000:00:02.0 0c03: 10de:0067 (rev a4)
0000:00:02.1 0c03: 10de:0067 (rev a4)
0000:00:02.2 0c03: 10de:0068 (rev a4)
0000:00:04.0 0200: 10de:0066 (rev a1)
0000:00:05.0 0401: 10de:006b (rev a2)
0000:00:06.0 0401: 10de:006a (rev a1)
0000:00:08.0 0604: 10de:006c (rev a3)
0000:00:09.0 0101: 10de:0065 (rev a2)
0000:00:0c.0 0604: 10de:006d (rev a3)
0000:00:0d.0 0c00: 10de:006e (rev a3)
0000:00:1e.0 0604: 10de:01e8 (rev c1)
0000:01:0a.0 0400: 109e:036e (rev 11)
0000:01:0a.1 0480: 109e:0878 (rev 11)
0000:01:0b.0 0104: 1095:3112 (rev 01)
0000:02:01.0 0200: 10b7:9201 (rev 40)
0000:03:00.0 0300: 1002:4e48
0000:03:00.1 0380: 1002:4e68
--
Configure bugmail: http://bugzilla.ubuntu.com/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the QA contact for the bug, or are watching the QA contact.
More information about the kernel-bugs
mailing list