[ubuntu/karmic] linux-fsl-imx51 2.6.31-101.8 (Accepted)

Andy Whitcroft apw at canonical.com
Fri Sep 18 14:05:31 BST 2009


linux-fsl-imx51 (2.6.31-101.8) karmic; urgency=low

  [ Alan Tull ]

  * ARM: IMX51: ENGR00114681 pcm: set minimum period to 2k
  * ARM: IMX51: ENGR00114820-1 Revert SGTL5000: Enable amixer controls
    Jack/Speaker Function
  * ARM: IMX51: ENGR00114820-2 sgtl5000: pop fixes
  * ARM: IMX51: ENGR00114867 MX51: tristate i2c levelshifter
  * ARM: IMX51: ENGR00115688 dvi: disable edid read
  * ARM: IMX51: ENGR00115618-1 sgtl5000: power reduction pop fix
  * ARM: IMX51: ENGR00115618-2 sgtl5000: power savings
  * ARM: IMX51: ENGR00115754 sgtl5000: power mic bias earlier

  [ Amit Kucheria ]

  * [Config] Run updateconfigs after rebasing to 2.6.31-rc8
  * ARM: IMX51: Make sgt5000 driver compile
  * [Upstream] Remove X86 dependency for the rt3070 driver
    - LP: #423767
  * [Config] Enable rt3070 from staging for imx51
    - LP: #423767
  * [Config] Set CONFIG_LSM_MMAP_MIN_ADDR to 0
  * [Config] imx51: Enable APM_EMULATION as per imx51_defconfig
  * ARM: IMX51: Fix compile of mxc_dataflash.c by replacing bus_id
  * ARM: IMX51: Don't let the dataflash driver hitch a ride on CONFIG_MTD
  * [Config] imx51: disable MTD_MXC_DATAFLASH
  * [Config] Run updateconfigs after rebasing to 2.6.31 final
  * [Config] imx51: updateconfigs after applying sdk-1.6 patches
  * ARM: IMX51: Remove cpu_is_mx2/cpu_is_mx3 definition from hardware.h
  * ARM: IMX51: Paramters to module_param_call should be NULL

  [ Ann Thornton ]

  * ARM: IMX51: ENGR00113055-1 Add ability to read and user EDID info
  * ARM: IMX51: ENGR00113055-2 Added ability to read EDID data and use it
    to set monitor.
  * ARM: IMX51: ENGR00114026 MX51 Prevent 2nd initialization of
    framebuffer.
  * ARM: IMX51: ENGR00114023-1 Support for dual monitors.
  * ARM: IMX51: ENGR00114023-2 MX51: Add support for dual monitors.
  * ARM: IMX51: ENGR00114024 Enable 720p via HDMI

  [ Arik Gubeskys ]

  * ARM: IMX51: ENGR00114210 IPU IC bypass mode: move display configuration
    to the FB driver

  [ b00984 ]

  * ARM: IMX51: ENGR00113773 Add apm support for mc13892 battery
  * ARM: IMX51: ENGR00114655 mitsubishi lvds xga lcd support for babbage
    2.5

  [ Dinh Nguyen ]

  * ARM: IMX51: ENGR00114282 MX51: Disable L2 SRPG
  * ARM: IMX51: ENGR00114453 MX51: Add support for keypad on Babbage 2.5
    board

  [ Guoqing Jiang ]

  * ARM: IMX51: ENGR00113618 Audio: Workaround for sgtl5000 codec suspend
    failure issue on MX25

  [ Jason ]

  * ARM: IMX51: ENGR00114157-1 Add SPI data flash driver support
  * ARM: IMX51: ENGR00114157-2 Add SPI data flash support for MX51
    babbage2.5
  * ARM: IMX51: ENGR00114189 Enlarge the rootfs partition to accommodate
    Gnome-mobile
  * ARM: IMX51: ENGR00113990 Fix for mtd_oobtest test failure
  * ARM: IMX51: ENGR00114882 Reset NFC delay line register
  * ARM: IMX51: ENGR00114880 Data abort on NFC memory byte access
  * ARM: IMX51: ENGR00115329 Enable NFC symmetric mode on MX51
  * ARM: IMX51: ENGR00115330 Fix ECC mode setting for MX51TO3
  * ARM: IMX51: ENGR00115336 Fix setting NFC FW for 16bit nand flash
    support on MX51

  [ JasonHua ]

  * ARM: IMX51: ENGR00113106 MX25 Camera: Some kernel message dumped when
    remove ov2640_camera

  [ Katherine Lu ]

  * ARM: IMX51: ENGR00114097 MX51 Babbage: Register backlight device only
    display card attached
  * ARM: IMX51: ENGR00113546 MX51: set PLL2 as UART parent clk
  * ARM: IMX51: ENGR00114139 MX51 Babbage: remove MC13892 backlight device
  * ARM: IMX51: ENGR00114166 MX51 Babbage: can not reboot from SPI NOR
  * ARM: IMX51: ENGR00114037 MX31: LCD can not resume after entering
    standby
  * ARM: IMX51: ENGR00114881 MX51: Disable SAHARA by default
  * ARM: IMX51: ENGR00114803 eCSPI Hang when acessing from multi modules

  [ Lily Zhang ]

  * ARM: IMX51: ENGR00113197-1 Fix Write pending issue with hwclock
    function
  * ARM: IMX51: ENGR00113197-2 disable RTC clock when it's not active
  * ARM: IMX51: ENGR00110228 Fix GPT timer stop issue
  * ARM: IMX51: ENGR00113662 enable coin cell charger
  * ARM: IMX51: ENGR00114328-1 SRTC: Change wait time for write operations
  * ARM: IMX51: ENGR00114328-2 BBG: Keep VRTC and CKIL active for SRTC
  * ARM: IMX51: ENGR00114345 Set MC13892 irq as wakeup resource
  * ARM: IMX51: ENGR00114738 MX51 BBG: Add OneWire support

  [ Lionel.Xu ]

  * ARM: IMX51: ENGR00107200 MX25: The SW workaround for left/right channel
    random swap issue
  * ARM: IMX51: ENGR00113470 MX37 ALSA ADC: Resolve the issue that arecord
    can't work
  * ARM: IMX51: ENGR00115113 SGTL5000: Jack Function/Speaker Function

  [ Liu Ying ]

  * ARM: IMX51: ENGR00113541 IPUv3:Support IC combing with local alpha
    contained in pixel
  * ARM: IMX51: ENGR00113673 IPUv3:Fix RGB to RGB pixel format changing
    with IC PRP_VF
  * ARM: IMX51: ENGR00114324-1 Enhance mmap implement of IIM driver
  * ARM: IMX51: ENGR00114611 Support RGB565 pixel format for WVGA panel on
    BBG2.5
  * ARM: IMX51: ENGR00114617 Support OV3640 camera on BBG2.5 accessory
    board
  * ARM: IMX51: ENGR00114663-1 Add function comments for mmap function of
    IIM driver

  [ Nancy Chen ]

  * ARM: IMX51: ENGR00114374 USB: Failed to unload USB host module
  * ARM: IMX51: ENGR00114685 MX51: Change the GP voltages for 167MHz and
    800MHz
  * ARM: IMX51: ENGR00114689 CPUFREQ: Add conservative governor support
  * ARM: IMX51: ENGR00114686 DVFS-CORE: Use GPC STRT bit to control DVFS
  * ARM: IMX51: ENGR00114686-1 MX51: Enable other CPUFREQ governors
  * ARM: IMX51: ENGR00114736 Fix build break by adding mxc_dvfs.h
  * ARM: IMX51: ENGR00114871 MX51: Add command line to enable peripheral SW
    Freq scaling
  * ARM: IMX51: ENGR00114963 MX51: CPUFREQ is not trigged if DVFS CORE is
    enabled
  * ARM: IMX51: ENGR00115013 MX51: System doesn't enter APM mode if DVFS
    CORE enabled

  [ Patrick Turley ]

  * ARM: IMX51: ENGR00107929 /proc/cpu/clocks Corrupts memory
  * ARM: IMX51: ENGR00103310 Initial imx_nfc NAND Flash MTD driver
  * ARM: IMX51: ENGR00115700: mxc_nd2 driver panics the kernel when booting
    on i.MX25

  [ Raj Rajasekaran ]

  * ARM: IMX51: ENGR00107366 DryIce: DryIce unit test failed with RTC
    enabled.

  [ Ranjani Vaidyanathan-RA5478 ]

  * ARM: IMX51: ENGR00114937: MX51: Move USBOH3 and USB-PHY to source from
    PLL2 and 24MHz.
  * ARM: IMX51: ENGR00115321: MX51: Change STOP mode voltage based on DS0.3
    datasheet.
  * ARM: IMX51: ENGR00115334: MX51: Donot scale arm_axi_clk in peripheral
    bus scaling.

  [ Richard Zhu ]

  * ARM: IMX51: ENGR00113376 [MX37] SD can't detected after fast
    removal/insertion
  * ARM: IMX51: ENGR00113607 Refine and unify the definitions of the two
    mmc host
  * ARM: IMX51: ENGR00114325-1: SIM: Add MX25 support

  [ Rob Herring ]

  * ARM: IMX51: ENGR00114598 mx51: add missing fb memory resource setup
  * ARM: IMX51: ENGR00114599 mx51: Add gpu2d uio driver
  * ARM: IMX51: ENGR00115613 ipuv3: enable DMFC watermark for sync channels

  [ Robby Cai ]

  * ARM: IMX51: ENGR00114911 make video buffer cacheable to improve video
    performance

  [ Tim Gardner ]

  * [Config] Don't include ABI or version in vmlinuz name in kernel-image
    - LP: #359049

  [ Wallace Wang ]

  * ARM: IMX51: ENGR00114140 SSI: TX fail if RX is enabled before TX
  * ARM: IMX51: ENGR00114625 BABBAGE: Add spdif support
  * ARM: IMX51: ENGR00114851 MX51: Fix SSI1 SDMA data transfer failure

  [ William Lai ]

  * ARM: IMX51: ENGR00114609 MX35 ASRC: Support SPDIF in/out
  * ARM: IMX51: ENGR00114644-1 MX51 PWM: Add pwm and backlight devices
  * ARM: IMX51: ENGR00114644-2 MX51 PWM: Correction for the PWM

  [ Wu Guoxing ]

  * ARM: IMX51: ENGR00114622 GPU: add platform device
  * ARM: IMX51: ENGR00114692 GPU: use axi_a_clk for both 2d and 3d
  * ARM: IMX51: ENGR00114962 : change gpu UIO driver to module

  [ Xinyu Chen ]

  * ARM: IMX51: ENGR00114989 MX35 SPDIF driver failed to play 48KHz audio

  [ Zhou Jingyu ]

  * ARM: IMX51: ENGR00114145 disable pmic charger on Babbage
  * ARM: IMX51: ENGR00113543 fix bug in mc13892 ADC suspend

  [ Ubuntu: 2.6.31-10.34 ]

  * [Upstream] ext3: Don't update superblock write time when filesystem is
    read-only
    - LP: #427622

  [ Ubuntu: 2.6.31-10.33 ]

  * [Upstream] dvb-usb: fix tuning with Cinergy T2
    - LP: #421258
  * [Config] Unconditionally copy files from sub-flavours lists.
    (really, really fix it this time)
    - LP: #423426
  * [Config] Set CONFIG_CACHEFILES=m for all flavours
  * ext4: Don't update superblock write time when filesystem is read-only
    - LP: #427822

  [ Ubuntu: 2.6.31-10.32 ]

  * [Config] enable module support for memory stick
    - LP: #159951
  * [Config] Unconditionally copy files from sub-flavours lists.
    - LP: #423426

  [ Ubuntu: 2.6.31-10.31 ]

  * rebase to v2.6.31 final
  * [Config] Recommend grub-pc in linux-image
    - LP: #385741
  * [Upstream] Pull latest update of lenovo-sl-laptop
  * [Upstream] (drop after 2.6.31) acerhdf: fix fan control for AOA150
    model
    - LP: #426691
  * [Config] De-macro some package names.
  * rebase to 2.6.31 final.

  [ Ubuntu: 2.6.31-10.30 ]

  * [Config] Enable CONFIG_USB_DEVICEFS
    - LP: #417748
  * [Config] Populate the config-update template a bit more
  * rebase to v2.6.31-rc9
  * [Config] update configs following rebase to v2.6.31-rc9
  * [Config] update ports configs following rebase to v2.6.31-rc9
  * SAUCE: wireless: hostap, fix oops due to early probing interrupt
    - LP: #254837
  * [Upstream] ACPI: Add Thinkpad T400 & Thinkpad T500 to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad X200, X200s, X200t to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad X300 & Thinkpad X301 to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad R400 & Thinkpad R500 to OSI(Linux)
    white-list
    - LP: #281732
  * [Upstream] ACPI: Add Thinkpad W500, W700, & W700ds to OSI(Linux)
    white-list
    - LP: #281732
  * SAUCE: AppArmor: Fix profile attachment for regexp based profile names
    - LP: #419308
  * SAUCE: AppArmor: Return the correct error codes on profile
    addition/removal
    - LP: #408473
  * SAUCE: AppArmor: Fix OOPS in profile listing, and display full list
    - LP: #408454
  * SAUCE: AppArmor: Fix mapping of pux to new internal permission format
    - LP: #419222
  * SAUCE: AppArmor: Fix change_profile failure
    - LP: #401931
  * SAUCE: AppArmor: Tell git to ignore generated include files
    - LP: #419505
  * [Upstream] acpi: video: Loosen strictness of video bus detection code
    - LP: #333386
  * SAUCE: Remove ov511 driver from ubuntu subdirectory
  * [Config] Exclude char-modules from non-x86 udeb creation
  * SAUCE: Notify the ACPI call chain of AC events
  * [Config] CONFIG_SATA_VIA=m
    - LP: #403385
  * [Config] Build in all phylib support modules.
  * [Config] Don't fail when sub-flavour files are missing
    - LP: #423426
  * [Config] Set CONFIG_LSM_MMAP_MIN_ADDR=0
    - LP: #423513
  * Rebased against v2.6.31-rc9

  [ Ubuntu: 2.6.31-9.29 ]

  * [Upstream] agp/intel: support for new chip variant of IGDNG mobile
    - LP: #419993
  * [Config] d-i/modules: Add new char-modules file, initialize with
    intel-agp
    - LP: #420605
  * Rebased against 2.6.31-rc8 plus some inotify regression patches:
    up through git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
    adda766193ea1cf3137484a9521972d080d0b7af.

  [ Ubuntu: 2.6.31-8.28 ]

  * [Config] Let nic-shared-modules depends on crypto-modules
    - LP: #360966
  * [Upstream] (drop after 2.6.31) drm/i915: increase default latency
    constant
    - LP: #412492
  * [Upstream]: (drop after 2.6.31) dell-laptop: don't change softblock
    status if HW switch is disabled
    - LP: #418721
  * [Upstream]: (drop after 2.6.31) compal-laptop: Add support for known
    Compal made Dell laptops
  * [Upstream]: (drop after 2.6.31) compal-laptop: Replace sysfs support
    with rfkill support
  * [Config] Add acpiphp to virtual sub-flavour
    - LP: #364916
  * Drop KSM patch set for now because of instabilities with encrypted swap.
    - LP: #418781

  [ Ubuntu: 2.6.31-7.27 ]

  * [Config] updateconfigs updateportsconfigs after 2.6.31-rc7 rebase
  * SAUCE: (drop after 2.6.31) Added KSM from mmotm-2009-08-20-19-18
    Replaces previous ksm patches from 2.6.31-6.25
  * [Config] KSM=y

  [ Ubuntu: 2.6.31-6.26 ]

  * [Config] enable CONFIG_AUFS_BR_RAMFS
    - LP: #414738
  * split out debian directory ready for abstraction
  * add printdebian target to find branch target
  * abstracted debian -- debian/files is not abstracted
  * abstracted debian -- packages must be built in debian/<pkg>
  * abstracted debian -- kernel-wedge needs to work in debian/
  * abstracted debian -- ensure we install the copyright file
  * abstracted-debian -- drop the debian directories from headers
  * abstracted-debian -- drop the debian directories from headers part 2
  * SAUCE: ubuntu-insert-changes -- follow abstracted debian
  * [Upstream] aoe: ensure we initialise the request_queue correctly V2
    - LP: #410198
  * [Config] Ports: Disable CONFIG_CPU_FREQ_DEBUG on powerpc-smp
  * [Config] Ports: Re-enable windfarm modules on powerpc64-smp
    - LP: #413150
  * [Config] Ports: Build all cpu frequency scaling governors into ports
    kernels
  * [Config] Ports: Build ext2 and ext3 modules into ports kernels
  * [Config] Ports: CONFIG_PACKET=y for all ports kernels
  * [Config] Ports: Enable PS3 network driver
  * abstracted debian -- call $(DEBIAN)/rules using make
  * [Config] Abstract the debian directory
  * SAUCE: Improve error reporting in postinst
    - LP: #358564

Date: Fri, 18 Sep 2009 13:10:41 +0100
Changed-By: Andy Whitcroft <apw at canonical.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
https://launchpad.net/ubuntu/karmic/+source/linux-fsl-imx51/2.6.31-101.8
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Fri, 18 Sep 2009 13:10:41 +0100
Source: linux-fsl-imx51
Binary: linux-image-2.6.31-101-imx51 linux-headers-2.6.31-101-imx51 kernel-image-2.6.31-101-imx51-di nic-modules-2.6.31-101-imx51-di nic-shared-modules-2.6.31-101-imx51-di serial-modules-2.6.31-101-imx51-di ppp-modules-2.6.31-101-imx51-di scsi-modules-2.6.31-101-imx51-di plip-modules-2.6.31-101-imx51-di fat-modules-2.6.31-101-imx51-di nfs-modules-2.6.31-101-imx51-di md-modules-2.6.31-101-imx51-di usb-modules-2.6.31-101-imx51-di input-modules-2.6.31-101-imx51-di mouse-modules-2.6.31-101-imx51-di irda-modules-2.6.31-101-imx51-di parport-modules-2.6.31-101-imx51-di nic-usb-modules-2.6.31-101-imx51-di sata-modules-2.6.31-101-imx51-di crypto-modules-2.6.31-101-imx51-di fs-core-modules-2.6.31-101-imx51-di fs-secondary-modules-2.6.31-101-imx51-di storage-core-modules-2.6.31-101-imx51-di block-modules-2.6.31-101-imx51-di
Architecture: source
Version: 2.6.31-101.8
Distribution: karmic
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Andy Whitcroft <apw at canonical.com>
Description: 
 block-modules-2.6.31-101-imx51-di - Block storage devices (udeb)
 crypto-modules-2.6.31-101-imx51-di - crypto modules (udeb)
 fat-modules-2.6.31-101-imx51-di - FAT filesystem support (udeb)
 fs-core-modules-2.6.31-101-imx51-di - Base filesystem modules (udeb)
 fs-secondary-modules-2.6.31-101-imx51-di - Extra filesystem modules (udeb)
 input-modules-2.6.31-101-imx51-di - Support for various input methods (udeb)
 irda-modules-2.6.31-101-imx51-di - Support for Infrared protocols (udeb)
 kernel-image-2.6.31-101-imx51-di - Linux kernel binary image for the Debian installer (udeb)
 linux-headers-2.6.31-101-imx51 - Linux kernel headers for version 2.6.31 on I.MX51-based systems
 linux-image-2.6.31-101-imx51 - Linux kernel image for version 2.6.31 on I.MX51-based systems
 md-modules-2.6.31-101-imx51-di - Multi-device support (raid, device-mapper, lvm) (udeb)
 mouse-modules-2.6.31-101-imx51-di - Mouse support (udeb)
 nfs-modules-2.6.31-101-imx51-di - NFS filesystem drivers (udeb)
 nic-modules-2.6.31-101-imx51-di - Network interface support (udeb)
 nic-shared-modules-2.6.31-101-imx51-di - Shared NIC drivers (udeb)
 nic-usb-modules-2.6.31-101-imx51-di - USB network interface support (udeb)
 parport-modules-2.6.31-101-imx51-di - Parallel port support (udeb)
 plip-modules-2.6.31-101-imx51-di - PLIP (parallel port) networking support (udeb)
 ppp-modules-2.6.31-101-imx51-di - PPP (serial port) networking support (udeb)
 sata-modules-2.6.31-101-imx51-di - SATA storage support (udeb)
 scsi-modules-2.6.31-101-imx51-di - SCSI storage support (udeb)
 serial-modules-2.6.31-101-imx51-di - Serial port support (udeb)
 storage-core-modules-2.6.31-101-imx51-di - Core storage support (udeb)
 usb-modules-2.6.31-101-imx51-di - Core USB support (udeb)
Changes: 
 linux-fsl-imx51 (2.6.31-101.8) karmic; urgency=low
 .
   [ Alan Tull ]
 .
   * ARM: IMX51: ENGR00114681 pcm: set minimum period to 2k
   * ARM: IMX51: ENGR00114820-1 Revert SGTL5000: Enable amixer controls
     Jack/Speaker Function
   * ARM: IMX51: ENGR00114820-2 sgtl5000: pop fixes
   * ARM: IMX51: ENGR00114867 MX51: tristate i2c levelshifter
   * ARM: IMX51: ENGR00115688 dvi: disable edid read
   * ARM: IMX51: ENGR00115618-1 sgtl5000: power reduction pop fix
   * ARM: IMX51: ENGR00115618-2 sgtl5000: power savings
   * ARM: IMX51: ENGR00115754 sgtl5000: power mic bias earlier
 .
   [ Amit Kucheria ]
 .
   * [Config] Run updateconfigs after rebasing to 2.6.31-rc8
   * ARM: IMX51: Make sgt5000 driver compile
   * [Upstream] Remove X86 dependency for the rt3070 driver
     - LP: #423767
   * [Config] Enable rt3070 from staging for imx51
     - LP: #423767
   * [Config] Set CONFIG_LSM_MMAP_MIN_ADDR to 0
   * [Config] imx51: Enable APM_EMULATION as per imx51_defconfig
   * ARM: IMX51: Fix compile of mxc_dataflash.c by replacing bus_id
   * ARM: IMX51: Don't let the dataflash driver hitch a ride on CONFIG_MTD
   * [Config] imx51: disable MTD_MXC_DATAFLASH
   * [Config] Run updateconfigs after rebasing to 2.6.31 final
   * [Config] imx51: updateconfigs after applying sdk-1.6 patches
   * ARM: IMX51: Remove cpu_is_mx2/cpu_is_mx3 definition from hardware.h
   * ARM: IMX51: Paramters to module_param_call should be NULL
 .
   [ Ann Thornton ]
 .
   * ARM: IMX51: ENGR00113055-1 Add ability to read and user EDID info
   * ARM: IMX51: ENGR00113055-2 Added ability to read EDID data and use it
     to set monitor.
   * ARM: IMX51: ENGR00114026 MX51 Prevent 2nd initialization of
     framebuffer.
   * ARM: IMX51: ENGR00114023-1 Support for dual monitors.
   * ARM: IMX51: ENGR00114023-2 MX51: Add support for dual monitors.
   * ARM: IMX51: ENGR00114024 Enable 720p via HDMI
 .
   [ Arik Gubeskys ]
 .
   * ARM: IMX51: ENGR00114210 IPU IC bypass mode: move display configuration
     to the FB driver
 .
   [ b00984 ]
 .
   * ARM: IMX51: ENGR00113773 Add apm support for mc13892 battery
   * ARM: IMX51: ENGR00114655 mitsubishi lvds xga lcd support for babbage
     2.5
 .
   [ Dinh Nguyen ]
 .
   * ARM: IMX51: ENGR00114282 MX51: Disable L2 SRPG
   * ARM: IMX51: ENGR00114453 MX51: Add support for keypad on Babbage 2.5
     board
 .
   [ Guoqing Jiang ]
 .
   * ARM: IMX51: ENGR00113618 Audio: Workaround for sgtl5000 codec suspend
     failure issue on MX25
 .
   [ Jason ]
 .
   * ARM: IMX51: ENGR00114157-1 Add SPI data flash driver support
   * ARM: IMX51: ENGR00114157-2 Add SPI data flash support for MX51
     babbage2.5
   * ARM: IMX51: ENGR00114189 Enlarge the rootfs partition to accommodate
     Gnome-mobile
   * ARM: IMX51: ENGR00113990 Fix for mtd_oobtest test failure
   * ARM: IMX51: ENGR00114882 Reset NFC delay line register
   * ARM: IMX51: ENGR00114880 Data abort on NFC memory byte access
   * ARM: IMX51: ENGR00115329 Enable NFC symmetric mode on MX51
   * ARM: IMX51: ENGR00115330 Fix ECC mode setting for MX51TO3
   * ARM: IMX51: ENGR00115336 Fix setting NFC FW for 16bit nand flash
     support on MX51
 .
   [ JasonHua ]
 .
   * ARM: IMX51: ENGR00113106 MX25 Camera: Some kernel message dumped when
     remove ov2640_camera
 .
   [ Katherine Lu ]
 .
   * ARM: IMX51: ENGR00114097 MX51 Babbage: Register backlight device only
     display card attached
   * ARM: IMX51: ENGR00113546 MX51: set PLL2 as UART parent clk
   * ARM: IMX51: ENGR00114139 MX51 Babbage: remove MC13892 backlight device
   * ARM: IMX51: ENGR00114166 MX51 Babbage: can not reboot from SPI NOR
   * ARM: IMX51: ENGR00114037 MX31: LCD can not resume after entering
     standby
   * ARM: IMX51: ENGR00114881 MX51: Disable SAHARA by default
   * ARM: IMX51: ENGR00114803 eCSPI Hang when acessing from multi modules
 .
   [ Lily Zhang ]
 .
   * ARM: IMX51: ENGR00113197-1 Fix Write pending issue with hwclock
     function
   * ARM: IMX51: ENGR00113197-2 disable RTC clock when it's not active
   * ARM: IMX51: ENGR00110228 Fix GPT timer stop issue
   * ARM: IMX51: ENGR00113662 enable coin cell charger
   * ARM: IMX51: ENGR00114328-1 SRTC: Change wait time for write operations
   * ARM: IMX51: ENGR00114328-2 BBG: Keep VRTC and CKIL active for SRTC
   * ARM: IMX51: ENGR00114345 Set MC13892 irq as wakeup resource
   * ARM: IMX51: ENGR00114738 MX51 BBG: Add OneWire support
 .
   [ Lionel.Xu ]
 .
   * ARM: IMX51: ENGR00107200 MX25: The SW workaround for left/right channel
     random swap issue
   * ARM: IMX51: ENGR00113470 MX37 ALSA ADC: Resolve the issue that arecord
     can't work
   * ARM: IMX51: ENGR00115113 SGTL5000: Jack Function/Speaker Function
 .
   [ Liu Ying ]
 .
   * ARM: IMX51: ENGR00113541 IPUv3:Support IC combing with local alpha
     contained in pixel
   * ARM: IMX51: ENGR00113673 IPUv3:Fix RGB to RGB pixel format changing
     with IC PRP_VF
   * ARM: IMX51: ENGR00114324-1 Enhance mmap implement of IIM driver
   * ARM: IMX51: ENGR00114611 Support RGB565 pixel format for WVGA panel on
     BBG2.5
   * ARM: IMX51: ENGR00114617 Support OV3640 camera on BBG2.5 accessory
     board
   * ARM: IMX51: ENGR00114663-1 Add function comments for mmap function of
     IIM driver
 .
   [ Nancy Chen ]
 .
   * ARM: IMX51: ENGR00114374 USB: Failed to unload USB host module
   * ARM: IMX51: ENGR00114685 MX51: Change the GP voltages for 167MHz and
     800MHz
   * ARM: IMX51: ENGR00114689 CPUFREQ: Add conservative governor support
   * ARM: IMX51: ENGR00114686 DVFS-CORE: Use GPC STRT bit to control DVFS
   * ARM: IMX51: ENGR00114686-1 MX51: Enable other CPUFREQ governors
   * ARM: IMX51: ENGR00114736 Fix build break by adding mxc_dvfs.h
   * ARM: IMX51: ENGR00114871 MX51: Add command line to enable peripheral SW
     Freq scaling
   * ARM: IMX51: ENGR00114963 MX51: CPUFREQ is not trigged if DVFS CORE is
     enabled
   * ARM: IMX51: ENGR00115013 MX51: System doesn't enter APM mode if DVFS
     CORE enabled
 .
   [ Patrick Turley ]
 .
   * ARM: IMX51: ENGR00107929 /proc/cpu/clocks Corrupts memory
   * ARM: IMX51: ENGR00103310 Initial imx_nfc NAND Flash MTD driver
   * ARM: IMX51: ENGR00115700: mxc_nd2 driver panics the kernel when booting
     on i.MX25
 .
   [ Raj Rajasekaran ]
 .
   * ARM: IMX51: ENGR00107366 DryIce: DryIce unit test failed with RTC
     enabled.
 .
   [ Ranjani Vaidyanathan-RA5478 ]
 .
   * ARM: IMX51: ENGR00114937: MX51: Move USBOH3 and USB-PHY to source from
     PLL2 and 24MHz.
   * ARM: IMX51: ENGR00115321: MX51: Change STOP mode voltage based on DS0.3
     datasheet.
   * ARM: IMX51: ENGR00115334: MX51: Donot scale arm_axi_clk in peripheral
     bus scaling.
 .
   [ Richard Zhu ]
 .
   * ARM: IMX51: ENGR00113376 [MX37] SD can't detected after fast
     removal/insertion
   * ARM: IMX51: ENGR00113607 Refine and unify the definitions of the two
     mmc host
   * ARM: IMX51: ENGR00114325-1: SIM: Add MX25 support
 .
   [ Rob Herring ]
 .
   * ARM: IMX51: ENGR00114598 mx51: add missing fb memory resource setup
   * ARM: IMX51: ENGR00114599 mx51: Add gpu2d uio driver
   * ARM: IMX51: ENGR00115613 ipuv3: enable DMFC watermark for sync channels
 .
   [ Robby Cai ]
 .
   * ARM: IMX51: ENGR00114911 make video buffer cacheable to improve video
     performance
 .
   [ Tim Gardner ]
 .
   * [Config] Don't include ABI or version in vmlinuz name in kernel-image
     - LP: #359049
 .
   [ Wallace Wang ]
 .
   * ARM: IMX51: ENGR00114140 SSI: TX fail if RX is enabled before TX
   * ARM: IMX51: ENGR00114625 BABBAGE: Add spdif support
   * ARM: IMX51: ENGR00114851 MX51: Fix SSI1 SDMA data transfer failure
 .
   [ William Lai ]
 .
   * ARM: IMX51: ENGR00114609 MX35 ASRC: Support SPDIF in/out
   * ARM: IMX51: ENGR00114644-1 MX51 PWM: Add pwm and backlight devices
   * ARM: IMX51: ENGR00114644-2 MX51 PWM: Correction for the PWM
 .
   [ Wu Guoxing ]
 .
   * ARM: IMX51: ENGR00114622 GPU: add platform device
   * ARM: IMX51: ENGR00114692 GPU: use axi_a_clk for both 2d and 3d
   * ARM: IMX51: ENGR00114962 : change gpu UIO driver to module
 .
   [ Xinyu Chen ]
 .
   * ARM: IMX51: ENGR00114989 MX35 SPDIF driver failed to play 48KHz audio
 .
   [ Zhou Jingyu ]
 .
   * ARM: IMX51: ENGR00114145 disable pmic charger on Babbage
   * ARM: IMX51: ENGR00113543 fix bug in mc13892 ADC suspend
 .
   [ Ubuntu: 2.6.31-10.34 ]
 .
   * [Upstream] ext3: Don't update superblock write time when filesystem is
     read-only
     - LP: #427622
 .
   [ Ubuntu: 2.6.31-10.33 ]
 .
   * [Upstream] dvb-usb: fix tuning with Cinergy T2
     - LP: #421258
   * [Config] Unconditionally copy files from sub-flavours lists.
     (really, really fix it this time)
     - LP: #423426
   * [Config] Set CONFIG_CACHEFILES=m for all flavours
   * ext4: Don't update superblock write time when filesystem is read-only
     - LP: #427822
 .
   [ Ubuntu: 2.6.31-10.32 ]
 .
   * [Config] enable module support for memory stick
     - LP: #159951
   * [Config] Unconditionally copy files from sub-flavours lists.
     - LP: #423426
 .
   [ Ubuntu: 2.6.31-10.31 ]
 .
   * rebase to v2.6.31 final
   * [Config] Recommend grub-pc in linux-image
     - LP: #385741
   * [Upstream] Pull latest update of lenovo-sl-laptop
   * [Upstream] (drop after 2.6.31) acerhdf: fix fan control for AOA150
     model
     - LP: #426691
   * [Config] De-macro some package names.
   * rebase to 2.6.31 final.
 .
   [ Ubuntu: 2.6.31-10.30 ]
 .
   * [Config] Enable CONFIG_USB_DEVICEFS
     - LP: #417748
   * [Config] Populate the config-update template a bit more
   * rebase to v2.6.31-rc9
   * [Config] update configs following rebase to v2.6.31-rc9
   * [Config] update ports configs following rebase to v2.6.31-rc9
   * SAUCE: wireless: hostap, fix oops due to early probing interrupt
     - LP: #254837
   * [Upstream] ACPI: Add Thinkpad T400 & Thinkpad T500 to OSI(Linux)
     white-list
     - LP: #281732
   * [Upstream] ACPI: Add Thinkpad X200, X200s, X200t to OSI(Linux)
     white-list
     - LP: #281732
   * [Upstream] ACPI: Add Thinkpad X300 & Thinkpad X301 to OSI(Linux)
     white-list
     - LP: #281732
   * [Upstream] ACPI: Add Thinkpad R400 & Thinkpad R500 to OSI(Linux)
     white-list
     - LP: #281732
   * [Upstream] ACPI: Add Thinkpad W500, W700, & W700ds to OSI(Linux)
     white-list
     - LP: #281732
   * SAUCE: AppArmor: Fix profile attachment for regexp based profile names
     - LP: #419308
   * SAUCE: AppArmor: Return the correct error codes on profile
     addition/removal
     - LP: #408473
   * SAUCE: AppArmor: Fix OOPS in profile listing, and display full list
     - LP: #408454
   * SAUCE: AppArmor: Fix mapping of pux to new internal permission format
     - LP: #419222
   * SAUCE: AppArmor: Fix change_profile failure
     - LP: #401931
   * SAUCE: AppArmor: Tell git to ignore generated include files
     - LP: #419505
   * [Upstream] acpi: video: Loosen strictness of video bus detection code
     - LP: #333386
   * SAUCE: Remove ov511 driver from ubuntu subdirectory
   * [Config] Exclude char-modules from non-x86 udeb creation
   * SAUCE: Notify the ACPI call chain of AC events
   * [Config] CONFIG_SATA_VIA=m
     - LP: #403385
   * [Config] Build in all phylib support modules.
   * [Config] Don't fail when sub-flavour files are missing
     - LP: #423426
   * [Config] Set CONFIG_LSM_MMAP_MIN_ADDR=0
     - LP: #423513
   * Rebased against v2.6.31-rc9
 .
   [ Ubuntu: 2.6.31-9.29 ]
 .
   * [Upstream] agp/intel: support for new chip variant of IGDNG mobile
     - LP: #419993
   * [Config] d-i/modules: Add new char-modules file, initialize with
     intel-agp
     - LP: #420605
   * Rebased against 2.6.31-rc8 plus some inotify regression patches:
     up through git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
     adda766193ea1cf3137484a9521972d080d0b7af.
 .
   [ Ubuntu: 2.6.31-8.28 ]
 .
   * [Config] Let nic-shared-modules depends on crypto-modules
     - LP: #360966
   * [Upstream] (drop after 2.6.31) drm/i915: increase default latency
     constant
     - LP: #412492
   * [Upstream]: (drop after 2.6.31) dell-laptop: don't change softblock
     status if HW switch is disabled
     - LP: #418721
   * [Upstream]: (drop after 2.6.31) compal-laptop: Add support for known
     Compal made Dell laptops
   * [Upstream]: (drop after 2.6.31) compal-laptop: Replace sysfs support
     with rfkill support
   * [Config] Add acpiphp to virtual sub-flavour
     - LP: #364916
   * Drop KSM patch set for now because of instabilities with encrypted swap.
     - LP: #418781
 .
   [ Ubuntu: 2.6.31-7.27 ]
 .
   * [Config] updateconfigs updateportsconfigs after 2.6.31-rc7 rebase
   * SAUCE: (drop after 2.6.31) Added KSM from mmotm-2009-08-20-19-18
     Replaces previous ksm patches from 2.6.31-6.25
   * [Config] KSM=y
 .
   [ Ubuntu: 2.6.31-6.26 ]
 .
   * [Config] enable CONFIG_AUFS_BR_RAMFS
     - LP: #414738
   * split out debian directory ready for abstraction
   * add printdebian target to find branch target
   * abstracted debian -- debian/files is not abstracted
   * abstracted debian -- packages must be built in debian/<pkg>
   * abstracted debian -- kernel-wedge needs to work in debian/
   * abstracted debian -- ensure we install the copyright file
   * abstracted-debian -- drop the debian directories from headers
   * abstracted-debian -- drop the debian directories from headers part 2
   * SAUCE: ubuntu-insert-changes -- follow abstracted debian
   * [Upstream] aoe: ensure we initialise the request_queue correctly V2
     - LP: #410198
   * [Config] Ports: Disable CONFIG_CPU_FREQ_DEBUG on powerpc-smp
   * [Config] Ports: Re-enable windfarm modules on powerpc64-smp
     - LP: #413150
   * [Config] Ports: Build all cpu frequency scaling governors into ports
     kernels
   * [Config] Ports: Build ext2 and ext3 modules into ports kernels
   * [Config] Ports: CONFIG_PACKET=y for all ports kernels
   * [Config] Ports: Enable PS3 network driver
   * abstracted debian -- call $(DEBIAN)/rules using make
   * [Config] Abstract the debian directory
   * SAUCE: Improve error reporting in postinst
     - LP: #358564
Checksums-Sha1: 
 998b1c327936f955b6024a53765d641e6078ad17 1857 linux-fsl-imx51_2.6.31-101.8.dsc
 ebc6c6e3fb8ba4bb1162c13519d0417ab4658295 83473758 linux-fsl-imx51_2.6.31-101.8.tar.gz
Checksums-Sha256: 
 bffc3d8bbf81868c03d5590a08211db12f6eeb122fe0733991196e3e95efffdd 1857 linux-fsl-imx51_2.6.31-101.8.dsc
 5398886d04ca78b447df1fe83b324c1eb43d34c9aed48c0144c1bc95d74882b0 83473758 linux-fsl-imx51_2.6.31-101.8.tar.gz
Files: 
 efb06d4b5c84bb45bcf6dd9d4f2feaf5 1857 devel optional linux-fsl-imx51_2.6.31-101.8.dsc
 9b8507e1537769a92b8b6dbe5da63b0c 83473758 devel optional linux-fsl-imx51_2.6.31-101.8.tar.gz
Launchpad-Bugs-Fixed: 159951 254837 281732 281732 281732 281732 281732 333386 358564 359049 360966 364916 385741 401931 403385 408454 408473 410198 412492 413150 414738 417748 418721 418781 419222 419308 419505 419993 420605 421258 423426 423426 423426 423513 423767 423767 426691 427622 427822

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkqzfB8ACgkQ7kQoFRG3d6/i6QCbBrRglsNkFl5/GUQ10W+w49Bv
RjcAnR6orShCiMni/Z2gQPKAiiXWdnl2
=wXN5
-----END PGP SIGNATURE-----


More information about the Karmic-changes mailing list