[ubuntu/karmic] insserv 1.12.0-11 (Accepted)

Ubuntu Installer archive at ubuntu.com
Mon Sep 7 19:37:59 BST 2009


insserv (1.12.0-11) unstable; urgency=low

  [ Petter Reinholdtsen ]
  * Migrate the responsibility for enabling or disabling dependency
    based boot sequencing from the insserv package to the sysv-rc
    package.  Rewrite package description to reflect this (Closes:
    #475478, #511753, #538959).  Keep a dummy update-bootsystem-insserv
    script to avoid having to conflict with sysv-rc version 2.87dsf-2.
    Keep update-rc.d-insserv to make it impossible for the update-rc.d
    diversion to be a dangling link during upgrades.  Make it a copy
    of update-rc.d from the new sysv-rc version to make sure both
    behave the same way.  update-rc.d-insserv should be removed in
    Squeeze+1.  update-bootsystem-insserv could be removed when
    sysv-rc 2.87dsf-2 has been gone from unstable for 3 months.
  * Drop dependencies on sysv-rc, initscripts and sysvinit-utils, and
    leave it for sysv-rc to pull in the packages needed for dependency
    based boot sequencing to work properly.
  * Update README to reflect that dependency based boot sequencing is
    now the default in Debian.  Drop reference to obsolete CONCURRENCY
    setting (Closes: #540447).
  * Add new test case test_override_remove trying to reproduce bug #540866.
    No luck so far.
  * Add new test case test_insserv_virt_loop to reproduce a bug
    reported by Raphael Geissert, where an incorrect insserv.conf will
    make insserv hang forever.  Add new patch 94_v1_12_2.patch from
    upstream to fix it (Closes: #541613).
  * Correct test test_early_all to fail if $all do not work with stop
    sequences.  Add new patch 95_stop_all.patch from upstream to fix
    it (Closes: #542043).
  * Change the definition of $syslog to include rsyslog, sysklogd,
    dsyslog, inetutils-syslogd  and syslog-ng, to include all syslog
    implmenetations in the archive.  Dropped the syslog provide from
    the list, as it should not be used.
  * Update to Standards-Version 3.8.3, no changes required.
  * Add lintian override for the transitient update-bootsystem-insserv
    binary missing a manual page.
  * Add new test test_local_virtual to verify that local virtual
    facilities work properly.

  [ Kel Modderman ]
  * Add new patch 20_install_perms_fixup.patch to install binary and
    conffile with correct permissions.
  * Add new patch 21_tests_suite_new_functions.patch to add a couple
    of new test suite functions to upstream test suite.
  * Make sure update-rc.d compares command line parameters for start/stop
    runlevel configuration with the Default-Start and Default-Stop values in
    LSB info comment of script and warns if there are differences.

insserv (1.12.0-10) unstable; urgency=low

  [ Petter Reinholdtsen ]
  * Change check-initd-order to return a exit code when there is a problem
    with the boot sequence or dependencies.
  * Change the default to enable dependency based boot sequencing if
    it is safe to do.  This should enable it in the common case,
    while avoiding conversion on problems.
  * Move all code from insserv.config to insserv.postist and remove
    insserv.config to make sure update-bootsystem-insserv is available
    and working when it is needed to test if it is safe to migrate to
    dependency based boot sequencing.

insserv (1.12.0-9) unstable; urgency=low

  * Adjust patch 71_complete_makefile to make sure the recursion depth
    calculation is done correctly in expand_faci().

insserv (1.12.0-8) unstable; urgency=low

  [ Petter Reinholdtsen ]
  * Refresh 92_m68k_alignment.patch.
  * Simplify test for bug #534526, while still triggering the bug.
  * Change definition of $time to make hwclock optional, as it might
    be dropped from the boot sequence in the future.
  * New patch 71_complete_makefile from upstream fixing .depend.*
    content when processing virtual facility definitions refering to
    other virtual facilities (Closes: #534526).

  [ Kel Modderman ]
  * Before inserting an initscript with insserv, check that
    /etc/init.d/<basename> exists in update-rc.d-insserv.

insserv (1.12.0-7) unstable; urgency=low

  * Update standards-version from 3.8.1 to 3.8.2.  No changes needed.
  * Fix wrong quote char in insserv(8) manual page.
  * Add required trailing slash to Vcs-Browser URL.
  * Improve package description to make it more obvious that insserv
    is not activated when installed.
  * Depend on sysvinit-utils (>= 2.86.ds1-62) to get a version of
    startpar that keep working even when /dev/pts is not yet mounted.
  * Depend on the initscripts version we want (>= 2.86.ds1-63)
    (instead of conflicting with the version we do not want which can
    give upgrade problems), to get one with the X-Interactive flags
    set in the scripts.  Drop hostname, mountkernfs, mountdevsubfs,
    checkroot and checkfs from the list of interactive scripts.
  * New patch 91_kfreebsd_nofadvice.patch trying to get the source
    building on kfreebsd.
  * New patch 92_m68k_alignment.patch trying to get the source
    building on m68k (Closes: #493637).
  * New patch 93_hurd_no_path_max.patch trying to get the source
    building on hurd.  Need a better one.

insserv (1.12.0-6) unstable; urgency=low

  * Add keyboard-setup, console-setup, cryptdisks, cryptdisks-early
    and checkfs-loop as interactive scripts while we wait for scripts
    to use X-Interactive: true as documented in bug #458224 (Closes:
    #510517, #534711).
  * Fix typo in testsuite function initdir_purge(), making sure the
    rc?.d directories are removed during purge.
  * Add new patch introducing a new keyword 'X-Interactive: true' in
    the LSB header (Closes: #458224).  Add test suite to verify that
    it is working.
  * Add DM-Upload-Allowed: yes header to allow my co-maintainer to
    upload this package.
  * Add testcase for incomplete .depend.boot file based on test
    created by Raphael Geissert for bug #534526.  Make this a
    non-fatal error in production builds while we figure out what is
    wrong.

Date: Mon,  07 Sep 2009 19:37:41 +0100
Changed-By: Scott James Remnant <scott at canonical.com>
Maintainer: Petter Reinholdtsen <pere at debian.org>
Origin: Debian/unstable
https://launchpad.net/ubuntu/karmic/+source/insserv/1.12.0-11
-------------- next part --------------
Origin: Debian/unstable
Format: 1.7
Date: Mon,  07 Sep 2009 19:37:41 +0100
Source: insserv
Binary: insserv
Architecture: source
Version: 1.12.0-11
Distribution: karmic
Urgency: low
Maintainer: Petter Reinholdtsen <pere at debian.org>
Changed-By: Scott James Remnant <scott at canonical.com>
Description: 
 insserv    - Tool to organize boot sequence using LSB init.d script dependenci
Closes: 458224 475478 493637 510517 511753 534526 534711 538959 540447 541613 542043
Changes: 
 insserv (1.12.0-11) unstable; urgency=low
 .
   [ Petter Reinholdtsen ]
   * Migrate the responsibility for enabling or disabling dependency
     based boot sequencing from the insserv package to the sysv-rc
     package.  Rewrite package description to reflect this (Closes:
     #475478, #511753, #538959).  Keep a dummy update-bootsystem-insserv
     script to avoid having to conflict with sysv-rc version 2.87dsf-2.
     Keep update-rc.d-insserv to make it impossible for the update-rc.d
     diversion to be a dangling link during upgrades.  Make it a copy
     of update-rc.d from the new sysv-rc version to make sure both
     behave the same way.  update-rc.d-insserv should be removed in
     Squeeze+1.  update-bootsystem-insserv could be removed when
     sysv-rc 2.87dsf-2 has been gone from unstable for 3 months.
   * Drop dependencies on sysv-rc, initscripts and sysvinit-utils, and
     leave it for sysv-rc to pull in the packages needed for dependency
     based boot sequencing to work properly.
   * Update README to reflect that dependency based boot sequencing is
     now the default in Debian.  Drop reference to obsolete CONCURRENCY
     setting (Closes: #540447).
   * Add new test case test_override_remove trying to reproduce bug #540866.
     No luck so far.
   * Add new test case test_insserv_virt_loop to reproduce a bug
     reported by Raphael Geissert, where an incorrect insserv.conf will
     make insserv hang forever.  Add new patch 94_v1_12_2.patch from
     upstream to fix it (Closes: #541613).
   * Correct test test_early_all to fail if $all do not work with stop
     sequences.  Add new patch 95_stop_all.patch from upstream to fix
     it (Closes: #542043).
   * Change the definition of $syslog to include rsyslog, sysklogd,
     dsyslog, inetutils-syslogd  and syslog-ng, to include all syslog
     implmenetations in the archive.  Dropped the syslog provide from
     the list, as it should not be used.
   * Update to Standards-Version 3.8.3, no changes required.
   * Add lintian override for the transitient update-bootsystem-insserv
     binary missing a manual page.
   * Add new test test_local_virtual to verify that local virtual
     facilities work properly.
 .
   [ Kel Modderman ]
   * Add new patch 20_install_perms_fixup.patch to install binary and
     conffile with correct permissions.
   * Add new patch 21_tests_suite_new_functions.patch to add a couple
     of new test suite functions to upstream test suite.
   * Make sure update-rc.d compares command line parameters for start/stop
     runlevel configuration with the Default-Start and Default-Stop values in
     LSB info comment of script and warns if there are differences.
 .
 insserv (1.12.0-10) unstable; urgency=low
 .
   [ Petter Reinholdtsen ]
   * Change check-initd-order to return a exit code when there is a problem
     with the boot sequence or dependencies.
   * Change the default to enable dependency based boot sequencing if
     it is safe to do.  This should enable it in the common case,
     while avoiding conversion on problems.
   * Move all code from insserv.config to insserv.postist and remove
     insserv.config to make sure update-bootsystem-insserv is available
     and working when it is needed to test if it is safe to migrate to
     dependency based boot sequencing.
 .
 insserv (1.12.0-9) unstable; urgency=low
 .
   * Adjust patch 71_complete_makefile to make sure the recursion depth
     calculation is done correctly in expand_faci().
 .
 insserv (1.12.0-8) unstable; urgency=low
 .
   [ Petter Reinholdtsen ]
   * Refresh 92_m68k_alignment.patch.
   * Simplify test for bug #534526, while still triggering the bug.
   * Change definition of $time to make hwclock optional, as it might
     be dropped from the boot sequence in the future.
   * New patch 71_complete_makefile from upstream fixing .depend.*
     content when processing virtual facility definitions refering to
     other virtual facilities (Closes: #534526).
 .
   [ Kel Modderman ]
   * Before inserting an initscript with insserv, check that
     /etc/init.d/<basename> exists in update-rc.d-insserv.
 .
 insserv (1.12.0-7) unstable; urgency=low
 .
   * Update standards-version from 3.8.1 to 3.8.2.  No changes needed.
   * Fix wrong quote char in insserv(8) manual page.
   * Add required trailing slash to Vcs-Browser URL.
   * Improve package description to make it more obvious that insserv
     is not activated when installed.
   * Depend on sysvinit-utils (>= 2.86.ds1-62) to get a version of
     startpar that keep working even when /dev/pts is not yet mounted.
   * Depend on the initscripts version we want (>= 2.86.ds1-63)
     (instead of conflicting with the version we do not want which can
     give upgrade problems), to get one with the X-Interactive flags
     set in the scripts.  Drop hostname, mountkernfs, mountdevsubfs,
     checkroot and checkfs from the list of interactive scripts.
   * New patch 91_kfreebsd_nofadvice.patch trying to get the source
     building on kfreebsd.
   * New patch 92_m68k_alignment.patch trying to get the source
     building on m68k (Closes: #493637).
   * New patch 93_hurd_no_path_max.patch trying to get the source
     building on hurd.  Need a better one.
 .
 insserv (1.12.0-6) unstable; urgency=low
 .
   * Add keyboard-setup, console-setup, cryptdisks, cryptdisks-early
     and checkfs-loop as interactive scripts while we wait for scripts
     to use X-Interactive: true as documented in bug #458224 (Closes:
     #510517, #534711).
   * Fix typo in testsuite function initdir_purge(), making sure the
     rc?.d directories are removed during purge.
   * Add new patch introducing a new keyword 'X-Interactive: true' in
     the LSB header (Closes: #458224).  Add test suite to verify that
     it is working.
   * Add DM-Upload-Allowed: yes header to allow my co-maintainer to
     upload this package.
   * Add testcase for incomplete .depend.boot file based on test
     created by Raphael Geissert for bug #534526.  Make this a
     non-fatal error in production builds while we figure out what is
     wrong.
Files: 
 9a88a1a35a66360b1b9804f818deb4b8 58568 misc optional insserv_1.12.0-11.diff.gz
 913e7ce0afdd0802820748e79ad87756 1218 misc optional insserv_1.12.0-11.dsc


More information about the Karmic-changes mailing list