[ubuntu/karmic] pulseaudio 1:0.9.15-1ubuntu1 (Accepted)
Luke Yelavich
themuso at ubuntu.com
Tue May 5 05:40:14 BST 2009
pulseaudio (1:0.9.15-1ubuntu1) karmic; urgency=low
* Merge from unreleased Debian pulseaudio git, remaining changes:
- epoch (my stupid fault :S)
- Don't build against, and create jack package. Jack is not in main
- use linear resampler to work better with lack of PREEMPT in jaunty's
-generic kernel config, also change buffer size
- Add alsa configuration files to route alsa applications via pulseaudio
- Move libasound2-plugins from Recommends to Depends
- Add pm-utils sleep hook to suspend (and resume) users' pulseaudio
daemons
- patch to fix source/sink and suspend-on-idle race
- Make initscript more informative in the default case of per-user
sessions
- create /var/run/pulse, and make restart more robust
- add status check for system wide pulseaudio instance
- LSB {Required-*,Should-*} should specify hal instead of dbus,
since hal is required (and already requires dbus)
- indicate that the system pulseaudio instance is being started from the init
script
- Install more upstream man pages
- Link to pacat for parec man page
- check whether pulseaudio is running before preloading the padsp library
- Add DEB_OPT_FLAG = -O3 as per recommendation from
pulseaudio-discuss/2007-December/001017.html
- cache /usr/share/sounds/ubuntu/stereo/ wav files on pulseaudio load
- disable glitch free (use tsched=0)
- Generate a PO template on build
- add special case to disable pulseaudio loading if accessibility/speech
is being used
- the sd wrapper script should not load pulseaudio if pulseaudio is being
used as a system service
- add a pulseaudio apport hook
- fix some typos in README.Debian
- demote paprefs to suggests
- drop padevchooser(Recommends) and pavucontrol (Suggests)
- drop libasyncns-dev build dependency, its in universe
* add libudev-dev as a build-dependency
pulseaudio (0.9.15-1) UNRELEASED; urgency=low
* debian/control: Build-Depend on libcap-dev instead of libcap2-dev
* New Upstream Version
* Update copyright file
* Updated pulseaudio-module-hal.install, dbus-util became part of pulsecore
* Move debug package to the debug Section
* Done make shlibs files for modules in /usr/lib/pulse-0.9.15
* Update standards-version to 3.8.1, no further changes
* Set priority of pulseaudio-module-raop-dbg to extra
pulseaudio (0.9.15~test5-1) experimental; urgency=low
* New Upstream Version
* debian/copyright: Updated
* debian/control: Build-Depends on libltdl7-dev
* debian/control: Build-Depends on libasound2-dev (>= 1.0.19)
* debian/rules: Use git format-patch instead of git-format-patch
* debian/patches/0001-load-module-gconf-earlier.patch:
- Removed. Merged upstream
* debian/pulseaudio.install: Update for new modules
* debian/pulseaudio-module-x11.install: Update for new modules
* Move libpulscore into the pulseaudio package
* debian/pulseaudio-module-bluetooth.install: Add the bluetooth-util module
library
* debian/pulseaudio.install: Add new modules
* debian/control: Add bulid-depends on libgtk2.0-dev and libxtst-dev
* debian/pulseaudio.shlibs, debian/libpulse0.shlibs: Update shlib files
* debian/pulseaudio.install: Add liboss-util.so oss module helper library
* debian/control, debian/pulseaudio-module-raop.install: Add RAOP module
pulseaudio (0.9.14-2) unstable; urgency=low
[ Sjoerd Simons ]
* Build against libcap2-dev (Closes: #489060)
* Bump shlibs of libpulse0 (Closes: #514645)
* Bump soname of libpulsecore to 9
* Wait up to 5 seconds for pulseaudio to stop. Fix suggested by Aron Griffis
(Closes: #488754, #498457)
* Don't put stop links in rc0 and rc6. Pulse doens't really need it. Patch
supplied by James Westby (Closes: #494959)
* Make the start option of the init script report the right status. Fix
suggested by Aron Griffis (Closes: #488752)
* Use per user esound sockets instead of a single one for all users
[ Baptiste Mille-Mathias ]
* debian/control:
- create a separate package for bluetooth module (Closes: #513832)
* debian/pulseaudio-module-bluetooth.install
- put files for the separate bluetooth module package
* debian/pulseaudio.install
- remove files of the separate bluetooth module package
[ Sjoerd Simons ]
* debian/control: Don't build the bluetooth module on non-linux systems
(Closes: #502837)
* debian/control: Make the bluetooth module conflict with older pulseaudio
versions
* Update standards version, no changes needed
* debian/copyright: Big update
pulseaudio (0.9.14-1) experimental; urgency=low
* New Upstream Version
* 0002-load-module-gconf-earlier.patch renamed to
0001-load-module-gconf-earlier.patch and updated
* 0001-Fix-library-search-path-to-include-lib-and-usr-lib.patch
- Removed, no longer applicable
* 0003-make-sure-to-use-64bit-rounding-even-on-32bit-machin.patch
- Removed, fixed upstream
* 0004-properly-remove-dbus-matches-an-filters-when-unloadi.patch
- Removed, fixed upstream
* debian/patches/series
- Updated
Date: Tue, 05 May 2009 14:18:20 +1000
Changed-By: Luke Yelavich <themuso at ubuntu.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Luke Yelavich <luke.yelavich at canonical.com>
https://launchpad.net/ubuntu/karmic/+source/pulseaudio/1:0.9.15-1ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Tue, 05 May 2009 14:18:20 +1000
Source: pulseaudio
Binary: pulseaudio pulseaudio-dbg pulseaudio-utils pulseaudio-utils-dbg pulseaudio-esound-compat pulseaudio-esound-compat-dbg pulseaudio-module-zeroconf pulseaudio-module-zeroconf-dbg pulseaudio-module-hal pulseaudio-module-hal-dbg pulseaudio-module-lirc pulseaudio-module-lirc-dbg pulseaudio-module-gconf pulseaudio-module-gconf-dbg pulseaudio-module-raop pulseaudio-module-raop-dbg pulseaudio-module-bluetooth pulseaudio-module-bluetooth-dbg pulseaudio-module-x11 pulseaudio-module-x11-dbg libpulse0 libpulse0-dbg libpulse-mainloop-glib0 libpulse-mainloop-glib0-dbg libpulse-browse0 libpulse-browse0-dbg libpulse-dev
Architecture: source
Version: 1:0.9.15-1ubuntu1
Distribution: karmic
Urgency: low
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Luke Yelavich <themuso at ubuntu.com>
Description:
libpulse-browse0 - PulseAudio client libraries (zeroconf support)
libpulse-browse0-dbg - PulseAudio client libraries (zeroconf support) debugging symbols
libpulse-dev - PulseAudio client development headers and libraries
libpulse-mainloop-glib0 - PulseAudio client libraries (glib support)
libpulse-mainloop-glib0-dbg - PulseAudio client libraries (glib support) debugging symbols
libpulse0 - PulseAudio client libraries
libpulse0-dbg - PulseAudio client libraries detached debugging symbols
pulseaudio - PulseAudio sound server
pulseaudio-dbg - PulseAudio sound server detached debugging symbols
pulseaudio-esound-compat - PulseAudio ESD compatibility layer
pulseaudio-esound-compat-dbg - PulseAudio ESD compatibility layer debugging symbols
pulseaudio-module-bluetooth - Bluetooth module for PulseAudio sound server
pulseaudio-module-bluetooth-dbg - Bluetooth module for PulseAudio sound server
pulseaudio-module-gconf - GConf module for PulseAudio sound server
pulseaudio-module-gconf-dbg - GConf module for PulseAudio sound server debugging symbols
pulseaudio-module-hal - HAL device detection module for PulseAudio sound server
pulseaudio-module-hal-dbg - HAL module for PulseAudio sound server debugging symbols
pulseaudio-module-lirc - lirc module for PulseAudio sound server
pulseaudio-module-lirc-dbg - lirc module for PulseAudio sound server debugging symbols
pulseaudio-module-raop - RAOP module for PulseAudio sound server
pulseaudio-module-raop-dbg - RAOP module for PulseAudio sound server
pulseaudio-module-x11 - X11 module for PulseAudio sound server
pulseaudio-module-x11-dbg - X11 module for PulseAudio sound server debugging symbols
pulseaudio-module-zeroconf - Zeroconf module for PulseAudio sound server
pulseaudio-module-zeroconf-dbg - Zeroconf module for PulseAudio sound server debugging symbols
pulseaudio-utils - Command line tools for the PulseAudio sound server
pulseaudio-utils-dbg - PulseAudio command line tools detached debugging symbols
Closes: 488752 488754 489060 494959 498457 502837 513832 514645
Changes:
pulseaudio (1:0.9.15-1ubuntu1) karmic; urgency=low
.
* Merge from unreleased Debian pulseaudio git, remaining changes:
- epoch (my stupid fault :S)
- Don't build against, and create jack package. Jack is not in main
- use linear resampler to work better with lack of PREEMPT in jaunty's
-generic kernel config, also change buffer size
- Add alsa configuration files to route alsa applications via pulseaudio
- Move libasound2-plugins from Recommends to Depends
- Add pm-utils sleep hook to suspend (and resume) users' pulseaudio
daemons
- patch to fix source/sink and suspend-on-idle race
- Make initscript more informative in the default case of per-user
sessions
- create /var/run/pulse, and make restart more robust
- add status check for system wide pulseaudio instance
- LSB {Required-*,Should-*} should specify hal instead of dbus,
since hal is required (and already requires dbus)
- indicate that the system pulseaudio instance is being started from the init
script
- Install more upstream man pages
- Link to pacat for parec man page
- check whether pulseaudio is running before preloading the padsp library
- Add DEB_OPT_FLAG = -O3 as per recommendation from
pulseaudio-discuss/2007-December/001017.html
- cache /usr/share/sounds/ubuntu/stereo/ wav files on pulseaudio load
- disable glitch free (use tsched=0)
- Generate a PO template on build
- add special case to disable pulseaudio loading if accessibility/speech
is being used
- the sd wrapper script should not load pulseaudio if pulseaudio is being
used as a system service
- add a pulseaudio apport hook
- fix some typos in README.Debian
- demote paprefs to suggests
- drop padevchooser(Recommends) and pavucontrol (Suggests)
- drop libasyncns-dev build dependency, its in universe
* add libudev-dev as a build-dependency
.
pulseaudio (0.9.15-1) UNRELEASED; urgency=low
.
* debian/control: Build-Depend on libcap-dev instead of libcap2-dev
* New Upstream Version
* Update copyright file
* Updated pulseaudio-module-hal.install, dbus-util became part of pulsecore
* Move debug package to the debug Section
* Done make shlibs files for modules in /usr/lib/pulse-0.9.15
* Update standards-version to 3.8.1, no further changes
* Set priority of pulseaudio-module-raop-dbg to extra
.
pulseaudio (0.9.15~test5-1) experimental; urgency=low
.
* New Upstream Version
* debian/copyright: Updated
* debian/control: Build-Depends on libltdl7-dev
* debian/control: Build-Depends on libasound2-dev (>= 1.0.19)
* debian/rules: Use git format-patch instead of git-format-patch
* debian/patches/0001-load-module-gconf-earlier.patch:
- Removed. Merged upstream
* debian/pulseaudio.install: Update for new modules
* debian/pulseaudio-module-x11.install: Update for new modules
* Move libpulscore into the pulseaudio package
* debian/pulseaudio-module-bluetooth.install: Add the bluetooth-util module
library
* debian/pulseaudio.install: Add new modules
* debian/control: Add bulid-depends on libgtk2.0-dev and libxtst-dev
* debian/pulseaudio.shlibs, debian/libpulse0.shlibs: Update shlib files
* debian/pulseaudio.install: Add liboss-util.so oss module helper library
* debian/control, debian/pulseaudio-module-raop.install: Add RAOP module
.
pulseaudio (0.9.14-2) unstable; urgency=low
.
[ Sjoerd Simons ]
* Build against libcap2-dev (Closes: #489060)
* Bump shlibs of libpulse0 (Closes: #514645)
* Bump soname of libpulsecore to 9
* Wait up to 5 seconds for pulseaudio to stop. Fix suggested by Aron Griffis
(Closes: #488754, #498457)
* Don't put stop links in rc0 and rc6. Pulse doens't really need it. Patch
supplied by James Westby (Closes: #494959)
* Make the start option of the init script report the right status. Fix
suggested by Aron Griffis (Closes: #488752)
* Use per user esound sockets instead of a single one for all users
.
[ Baptiste Mille-Mathias ]
* debian/control:
- create a separate package for bluetooth module (Closes: #513832)
* debian/pulseaudio-module-bluetooth.install
- put files for the separate bluetooth module package
* debian/pulseaudio.install
- remove files of the separate bluetooth module package
.
[ Sjoerd Simons ]
* debian/control: Don't build the bluetooth module on non-linux systems
(Closes: #502837)
* debian/control: Make the bluetooth module conflict with older pulseaudio
versions
* Update standards version, no changes needed
* debian/copyright: Big update
.
pulseaudio (0.9.14-1) experimental; urgency=low
.
* New Upstream Version
* 0002-load-module-gconf-earlier.patch renamed to
0001-load-module-gconf-earlier.patch and updated
* 0001-Fix-library-search-path-to-include-lib-and-usr-lib.patch
- Removed, no longer applicable
* 0003-make-sure-to-use-64bit-rounding-even-on-32bit-machin.patch
- Removed, fixed upstream
* 0004-properly-remove-dbus-matches-an-filters-when-unloadi.patch
- Removed, fixed upstream
* debian/patches/series
- Updated
Checksums-Sha1:
8c670f1edfbaf2f668c99fdf14d32c04065285c2 2692 pulseaudio_0.9.15-1ubuntu1.dsc
56fb71e4e88c901d9941d85bfe142612c30e5c8e 1704374 pulseaudio_0.9.15.orig.tar.gz
a57e261a21522e3a1d04553cea52f943164c4d0e 30336 pulseaudio_0.9.15-1ubuntu1.diff.gz
Checksums-Sha256:
174abbbb1e5a4c9724bf090157fa82fb1420c58547608c3ebe21c211139c1379 2692 pulseaudio_0.9.15-1ubuntu1.dsc
1e8ad5b7c5cf3485bd0738c296274ff2c99d26d12a25a225dc250eddea25b9f1 1704374 pulseaudio_0.9.15.orig.tar.gz
fe3dde189ca53c4b8e27501fc56def05d3396a43b722ba58421d8a8af6695ddc 30336 pulseaudio_0.9.15-1ubuntu1.diff.gz
Files:
f787e00fddba2435c9e8bc838a7091f0 2692 sound optional pulseaudio_0.9.15-1ubuntu1.dsc
4510364eeab219fd100bd1b373b1a002 1704374 sound optional pulseaudio_0.9.15.orig.tar.gz
16220693aea9fb8eb8f50678e2b08f36 30336 sound optional pulseaudio_0.9.15-1ubuntu1.diff.gz
Original-Maintainer: Pulseaudio maintenance team <pkg-pulseaudio-devel at lists.alioth.debian.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkn/wpQACgkQjVefwtBjIM4mtACgix4zoXl/gk5zfk5uLh7nUC75
XkQAoJHKIVEtYf2w/avsuzMkrZq3Ln3I
=ra1k
-----END PGP SIGNATURE-----
More information about the Karmic-changes
mailing list