[ubuntu/karmic] sane-backends 1.0.20-4ubuntu1 (Accepted)

[Martin Pitt]

sane-backends (1.0.20-4ubuntu1) karmic; urgency=low

  * Merge from debian unstable, remaining changes:
    - Add 42_add_epson_cx_6000.dpatch: Add Epson CX6000. (LP: #314485)
    - debian/control:
      + Set Ubuntu maintainer address.
      + Demote libsane-extras from Depends: to Suggests:, as long as
        this package is in universe.
      + Demote sane-utils and avahi-daemon from Recommends to Suggests.
        We do not want to have an init script for saned laying around,
        which is disabled by default anyway.
    - debian/libsane.dirs.linux: remove
    - debian/{libsane.install.in,libsane-dev.install,rules}: Install
      documentation into libsane-dev instead of libsane to save CD space.
    - debian/rules:
      + Link using -Bsymbolic-functions (startup time optimization).
      + /etc/modprobe.d/libsane blacklists two modules that don't exist
        anymore, dropped creation of this file
    - debian{rules,sane-utils.saned.init}: saned init script does not need
      to be started before gdm, and does not need to be called on shutdown.
    - debian/libsane.postinst: Do not create the scanner group.
    - debian/{sane-utils.config,sane-utils.postinst,sane-utils.templates}:
      Drop the support for saned in the scanner group, since we don't have
      a scanner group anymore!
    - debian/libsane.preinst:
      + Remove the old blacklist-scanner modprobe file.  LP: #340873.
      + Remove the old file if unmodified
  * Add ubuntu_udev_noperm.dpatch: Change udev rules to be suitable for
    Ubuntu:
    - Do not change device permissions (already covered by udev-extra's
      70-acl.rules)
    - Do not cover SCSI scanners (already covered by udev-extra's
      70-acl.rules)
    - Simplify description and structure.
   * debian/rules: Install udev rules again, since we now don't rely on
     hal any more and thus we need the ENV{libsane_matched}=="yes" flag.

sane-backends (1.0.20-4) unstable; urgency=low

  * debian/rules:
    + Serialize autotools/patch/configure for parallel builds, now that
      parallel builds are possible with the upstream build system
      (closes: #506620).
  * debian/control:
    + Bump libsane-extras dependencies to 1.0.20.1.
  * debian/sane-utils.saned.init:
    + Add status action, taken from iaxmodem (closes: #528265).

  * debian/patches/07_tools_missing_libcam.dpatch:
    + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI
      libraries. From upstream via Aurélien JARNO (closes: #528594).

Date: Thu, 04 Jun 2009 10:06:14 +0200
Changed-By: Martin Pitt <martin.pitt at ubuntu.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/karmic/+source/sane-backends/1.0.20-4ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Thu, 04 Jun 2009 10:06:14 +0200
Source: sane-backends
Binary: sane-utils libsane libsane-dev libsane-dbg
Architecture: source
Version: 1.0.20-4ubuntu1
Distribution: karmic
Urgency: low
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Martin Pitt <martin.pitt at ubuntu.com>
Description: 
 libsane    - API library for scanners
 libsane-dbg - API development library for scanners [debug symbols]
 libsane-dev - API development library for scanners [development files]
 sane-utils - API library for scanners -- utilities
Closes: 506620 528265 528594
Launchpad-Bugs-Fixed: 314485 340873
Changes: 
 sane-backends (1.0.20-4ubuntu1) karmic; urgency=low
 .
   * Merge from debian unstable, remaining changes:
     - Add 42_add_epson_cx_6000.dpatch: Add Epson CX6000. (LP: #314485)
     - debian/control:
       + Set Ubuntu maintainer address.
       + Demote libsane-extras from Depends: to Suggests:, as long as
         this package is in universe.
       + Demote sane-utils and avahi-daemon from Recommends to Suggests.
         We do not want to have an init script for saned laying around,
         which is disabled by default anyway.
     - debian/libsane.dirs.linux: remove
     - debian/{libsane.install.in,libsane-dev.install,rules}: Install
       documentation into libsane-dev instead of libsane to save CD space.
     - debian/rules:
       + Link using -Bsymbolic-functions (startup time optimization).
       + /etc/modprobe.d/libsane blacklists two modules that don't exist
         anymore, dropped creation of this file
     - debian{rules,sane-utils.saned.init}: saned init script does not need
       to be started before gdm, and does not need to be called on shutdown.
     - debian/libsane.postinst: Do not create the scanner group.
     - debian/{sane-utils.config,sane-utils.postinst,sane-utils.templates}:
       Drop the support for saned in the scanner group, since we don't have
       a scanner group anymore!
     - debian/libsane.preinst:
       + Remove the old blacklist-scanner modprobe file.  LP: #340873.
       + Remove the old file if unmodified
   * Add ubuntu_udev_noperm.dpatch: Change udev rules to be suitable for
     Ubuntu:
     - Do not change device permissions (already covered by udev-extra's
       70-acl.rules)
     - Do not cover SCSI scanners (already covered by udev-extra's
       70-acl.rules)
     - Simplify description and structure.
    * debian/rules: Install udev rules again, since we now don't rely on
      hal any more and thus we need the ENV{libsane_matched}=="yes" flag.
 .
 sane-backends (1.0.20-4) unstable; urgency=low
 .
   * debian/rules:
     + Serialize autotools/patch/configure for parallel builds, now that
       parallel builds are possible with the upstream build system
       (closes: #506620).
   * debian/control:
     + Bump libsane-extras dependencies to 1.0.20.1.
   * debian/sane-utils.saned.init:
     + Add status action, taken from iaxmodem (closes: #528265).
 .
   * debian/patches/07_tools_missing_libcam.dpatch:
     + Added; fix sane_find_scanner build on kFreeBSD by adding missing SCSI
       libraries. From upstream via Aurélien JARNO (closes: #528594).
Checksums-Sha1: 
 1242dc61d31590d0cbfbec45e7b103a380ccc862 1565 sane-backends_1.0.20-4ubuntu1.dsc
 3cd8fd628dd1976366ab40eb7bff0c7454ebfc3c 47348 sane-backends_1.0.20-4ubuntu1.diff.gz
Checksums-Sha256: 
 965723ff88f37c7b5299bde471a60afa38d454ae506110ebb16ff709aa36e0e8 1565 sane-backends_1.0.20-4ubuntu1.dsc
 307fac441a458ee09ffa0fefa4687f38fe562e3e585a1ae50a257f6153b251d6 47348 sane-backends_1.0.20-4ubuntu1.diff.gz
Files: 
 b6a02771671809dbfc15edb6feeeb9fc 1565 graphics optional sane-backends_1.0.20-4ubuntu1.dsc
 7de1ac89f9a5540429e861646d90c7c1 47348 graphics optional sane-backends_1.0.20-4ubuntu1.diff.gz
Original-Maintainer: Julien BLACHE <jblache at debian.org>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkonjpsACgkQDecnbV4Fd/JH+wCg3nH+ivnj9HtB/+2tK14HdA2s
0w8AoKBt708rf/2dCFvEBxekmiaSx+6o
=GBn8
-----END PGP SIGNATURE-----