答复: 答复: Using maas+juju to deploy openstack,I can't run 02-maasdeploy.sh successfully.

Wed Dec 9 02:16:04 UTC 2015

Hi Narinder Gupta,
     Now  I am use the user onos ,password root,
     Where should I modify in the file deployments.yaml?
Could you show me?

Thanks and Regards,
yuanyou

发件人: zhangyuanyou
发送时间: 2015年12月7日 9:48
收件人: 'Narinder Gupta'
抄送: artur.tyloch at canonical.com; billy.olsen at canonical.com; Weidong.Shao; juju at lists.ubuntu.com
主题: 答复: 答复: Using maas+juju to deploy openstack,I can't run 02-maasdeploy.sh successfully.

Hi Narinder Gupta,
I can login maas server by ssh onos at 192.168.212.140<mailto:onos at 192.168.212.140> successfully.
I had uploaded the file ,please check it.
Thanks for your help!

Yuanyou

发件人: Narinder Gupta [mailto:narinder.gupta at canonical.com]
发送时间: 2015年12月5日 23:20
收件人: zhangyuanyou
抄送: artur.tyloch at canonical.com<mailto:artur.tyloch at canonical.com>; billy.olsen at canonical.com<mailto:billy.olsen at canonical.com>; Weidong.Shao; juju at lists.ubuntu.com<mailto:juju at lists.ubuntu.com>
主题: Re: 答复: Using maas+juju to deploy openstack,I can't run 02-maasdeploy.sh successfully.

Yuanyou,
Will you please send me following details?

deployments.yaml file also script 02-maasdeployment.sh

Also try the following:

try to ssh into the maas server and see whether it works or not? ssh onos at 192.168.212.140<mailto:onos at 192.168.212.140>  also whether you are able to ping or not to 192.168.212.140.

Also please send me your jump host config details. specially /etc/network/interfaces file.i

Thanks and Regards,

Narinder Gupta (PMP)                   narinder.gupta at canonical.com<mailto:narinder.gupta at canonical.com>

Canonical, Ltd.                    narindergupta [irc.freenode.net<http://irc.freenode.net>]

+1.281.736.5150                            narindergupta2007[skype]

Ubuntu- Linux for human beings | www.ubuntu.com<http://www.ubuntu.com> | www.canonical.com<http://www.canonical.com>

On Sat, Dec 5, 2015 at 2:50 AM, zhangyuanyou <zhangyuanyou at huawei.com<mailto:zhangyuanyou at huawei.com>> wrote:
Hi Narinder Gupta,
I had to change to user onos,but it doesn’t work. Is it shoulb be user ubuntu?
My host environment is like this:
       Maas server :
Ip:192.168.212.140
user :root
password:root

user:onos
password:root
       Thanks,
Yuanyou

发件人: Narinder Gupta [mailto:narinder.gupta at canonical.com<mailto:narinder.gupta at canonical.com>]
发送时间: 2015年12月5日 14:50
收件人: zhangyuanyou
抄送: artur.tyloch at canonical.com<mailto:artur.tyloch at canonical.com>; billy.olsen at canonical.com<mailto:billy.olsen at canonical.com>; Weidong.Shao; juju at lists.ubuntu.com<mailto:juju at lists.ubuntu.com>
主题: Re: Using maas+juju to deploy openstack,I can't run 02-maasdeploy.sh successfully.

For more information about ATT recent setup please follow this link which works well https://wiki.opnfv.org/copper/academy/joid

Thanks and Regards,

Narinder Gupta (PMP)                   narinder.gupta at canonical.com<mailto:narinder.gupta at canonical.com>

Canonical, Ltd.                    narindergupta [irc.freenode.net<http://irc.freenode.net>]

+1.281.736.5150<tel:%2B1.281.736.5150>                            narindergupta2007[skype]

Ubuntu- Linux for human beings | www.ubuntu.com<http://www.ubuntu.com> | www.canonical.com<http://www.canonical.com>

On Sat, Dec 5, 2015 at 12:34 AM, Narinder Gupta <narinder.gupta at canonical.com<mailto:narinder.gupta at canonical.com>> wrote:
Hi Yuanyou,
Will you please let me know your host environment and I am wondering you are using root user? I have not tested 02-maasdeploy.sh script with root user yet. Will you please try it with ubuntu user?

Will you please try this with latest git repository as i checked in few changes recently within couple of days for JOID.

In new version i have added default lab which is very much like you are trying the MAAS on.  I tried to configure the ssh appropriately in script before i copy the values. So may be running as ubuntu user should be good. Also in yaml file try the ubuntu user.

Same was tested by 4 different labs so far it is working.

Thanks and Regards,

Narinder Gupta (PMP)                   narinder.gupta at canonical.com<mailto:narinder.gupta at canonical.com>

Canonical, Ltd.                    narindergupta [irc.freenode.net<http://irc.freenode.net>]

+1.281.736.5150<tel:%2B1.281.736.5150>                            narindergupta2007[skype]

Ubuntu- Linux for human beings | www.ubuntu.com<http://www.ubuntu.com> | www.canonical.com<http://www.canonical.com>

On Fri, Dec 4, 2015 at 8:35 PM, zhangyuanyou <zhangyuanyou at huawei.com<mailto:zhangyuanyou at huawei.com>> wrote:
Hi  Artur Tyloch,
   I'm working on maas+juju to deploy openstack,now I edit the 02-maasdeploy.sh and excute it.
But this line "maas-deployer -c deployment.yaml -d --force" can't pass ,it always let me to input the password like this:

2015-12-04 17:45:54,032 DEBUG Executing: 'virt-install --connect qemu:///system --name opnfv-maas-intel --ram 4096 --vcpus 4 --disk vol=default/opnfv-maas-intel-root.img,format=qcow2,bus=virtio,io=native --disk vol=default/opnfv-maas-intel-seed.img,format=raw,bus=virtio,io=native --network bridge=brAdm,model=virtio --network bridge=brData,model=virtio --network bridge=brPublic,model=virtio --noautoconsole --vnc --import' stdin=''
2015-12-04 17:45:55,145 DEBUG Executing: 'virsh -c qemu:///system autostart opnfv-maas-intel' stdin=''
2015-12-04 17:45:55,162 DEBUG Waiting for MAAS vm to come up for ssh..
2015-12-04 17:45:55,163 DEBUG Using ip address specified: 192.168.212.140
2015-12-04 17:45:55,163 DEBUG Executing: 'ssh -i /root/.ssh/id_maas -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no root at 192.168.212.140<mailto:root at 192.168.212.140> true' stdin=''
root at 192.168.212.140's<mailto:root at 192.168.212.140's> password:

I edited the file deployment.yaml like this:
demo-maas:
    maas:
        # Defines the general setup for the MAAS environment, including the
        # username and password for the host as well as the MAAS server.
        user: root
        password: root

        # Contains the virtual machine parameters for creating the MAAS virtual
        # server. Here you can configure the name of the virsh domain, the
        # parameters for how the network is attached.
        name: opnfv-maas-intel
        interfaces: ['bridge=brAdm,model=virtio','bridge=brData,model=virtio','bridge=brPublic,model=virtio']
        memory: 4096
        vcpus: 4
        arch: amd64
        pool: default
        disk_size: 160G

        # Apt http proxy setting(s)
        apt_http_proxy:

        apt_sources:
          - ppa:maas/stable
          - ppa:juju/stable

        # Virsh power settings
        # Specifies the uri and keys to use for virsh power control of the
        # juju virtual machine. If the uri is omitted, the value for the
        # --remote is used. If no power settings are desired, then do not
        # supply the virsh block.
        virsh:
            rsa_priv_key: /home/ubuntu/.ssh/id_rsa
            rsa_pub_key: /home/ubuntu/.ssh/id_rsa.pub
#            uri: qemu+ssh://ubuntu@10.4.1.1/system<http://ubuntu@10.4.1.1/system>

        # Defines the IP Address that the configuration script will use to
        # to access the MAAS controller via SSH.
        ip_address: 192.168.212.140

Could you help me to resolve the question ? Any assistance is greatly appreciated.
Thanks.
Yuanyou

--
Juju mailing list
Juju at lists.ubuntu.com<mailto:Juju at lists.ubuntu.com>
Modify settings or unsubscribe at: https://lists.ubuntu.com/mailman/listinfo/juju

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/juju/attachments/20151209/f24fc051/attachment.html>