[ubuntu/jaunty] linux-ports 2.6.28-4.10 (Accepted)
Luke Yelavich
themuso at ubuntu.com
Mon Mar 9 06:45:25 GMT 2009
linux-ports (2.6.28-4.10) jaunty; urgency=low
[ Luke Yelavich ]
* set LEGACY_PTY_COUNT to 0 as per most mainline jaunty kernels
* build the fuse module into the kernel, as per mainline jaunty kernels
* add hid-* modules to input-modules udeb
Rebase on top of jaunty 2.6.28-9.29:
[ Andy Whitcroft ]
* link-headers -- only link directories which do not already exist
- LP: #315252
[ Daniel Marjamäki ]
* SAUCE: (drop after 2.6.28) netxen: fix memory leak in
drivers/net/netxen_nic_init.c
- LP: #330813
[ Dhananjay Phadke ]
* SAUCE: (drop after 2.6.28) netxen: fix endianness in firmware commands
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix ipv6 offload and tx cleanup
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix link speed reporting for some
boards
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: firmware init fix
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: cleanup mac list on driver unload
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: hold tx lock while sending firmware
commands
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: handle dma mapping failures
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: avoid invalid iounmap
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: include ipv6.h (fixes build failure)
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix vlan tso/checksum offload
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: reduce memory footprint
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: revert jumbo ringsize
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix msi-x interrupt handling
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: remove pcie workaround
- LP: #330813
[ Hannes Eder ]
* SAUCE: (drop after 2.6.28) drivers/net/netxen: fix sparse warnings: use
NULL pointer instead of plain integer
- LP: #330813
[ Huaxu Wan ]
* SAUCE: report rfkill changes event if interface is down
- LP: #193970
[ Tim Gardner ]
* MV78XX0 must specify a target in the vars definition.
[ Upstream Kernel Changes ]
* Revert "ext4: wait on all pending commits in ext4_sync_fs()"
* jbd2: Fix return value of jbd2_journal_start_commit()
* jbd2: Avoid possible NULL dereference in
jbd2_journal_begin_ordered_truncate()
* ext4: Fix to read empty directory blocks correctly in 64k
* ext4: Fix lockdep warning
* ext4: Initialize preallocation list_head's properly
* ext4: Implement range_cyclic in ext4_da_writepages instead of
write_cache_pages
* ext4: Fix NULL dereference in ext4_ext_migrate()'s error handling
* ext4: Add fallback for find_group_flex
* ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()
* Added mv78xx0 flavor
[ Alexey Starikovskiy ]
* SAUCE: ACPI: EC: Limit workaround for ASUS notebooks even more
- LP: #288385
[ Scott James Remnant ]
* SAUCE: Auto-load esp module when device opened.
* SAUCE: Auto-load bridge module when socket opened.
* SAUCE: Auto-load af_netlink module when socket opened.
* SAUCE: Auto-load wanrouter module when socket opened.
* SAUCE: Auto-load ip_queue module when socket opened.
* SAUCE: Auto-load ip6_queue module when socket opened.
* SAUCE: Auto-load cn module when socket opened.
* SAUCE: Auto-load scsi_transport_iscsi module when socket opened.
* SAUCE: Auto-load ftl module when device opened.
* SAUCE: Auto-load pcd module when device opened.
* SAUCE: Auto-load pf module when device opened.
* SAUCE: Auto-load nftl module when device opened.
* SAUCE: Auto-load mousedev module when psaux device opened.
* SAUCE: Auto-load mousedev module when /dev/input/mice opened.
* SAUCE: Auto-load rng-core module when device opened.
* SAUCE: Auto-load openprom module when device opened.
* SAUCE: Auto-load applicom module when device opened.
* SAUCE: Auto-load toshiba module when device opened.
* SAUCE: Auto-load cyclades module when device opened.
* SAUCE: Auto-load riscom8 module when device opened.
* SAUCE: Auto-load specialix module when device opened.
* SAUCE: Auto-load videodev module when device opened.
* SAUCE: Auto-load i2c_dev module when device opened.
* SAUCE: Auto-load mtdchar module when device opened.
* SAUCE: Auto-load pt module when device opened.
* SAUCE: Auto-load pg module when device opened.
* SAUCE: Auto-load cdc_acm module when device opened.
* SAUCE: Auto-load msr module when device opened.
* SAUCE: Auto-load cpuid module when device opened.
* SAUCE: quickcam: Enable double-buffering by default
* SAUCE: libata: Ignore HPA by default.
* SAUCE: hostap: Change initial operation mode to managed (infra)
* SAUCE: floppy: Provide a PnP device table in the module.
- LP: #255651
* SAUCE: Auto-load mwave module when device opened.
* Build CONFIG_FUSE_FS into kernel, not as module.
[ Stefan Bader ]
* Enable build of ext4 as a module on LPIA
- LP: #331848
[ Tim Gardner ]
* Update configs to fix LPIA FTBS
Date: Mon, 09 Mar 2009 17:32:16 +1100
Changed-By: Luke Yelavich <themuso at ubuntu.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Signed-By: Luke Yelavich <luke.yelavich at canonical.com>
https://launchpad.net/ubuntu/jaunty/+source/linux-ports/2.6.28-4.10
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Mon, 09 Mar 2009 17:32:16 +1100
Source: linux-ports
Binary: linux-ports-source-2.6.28 linux-ports-doc-2.6.28 linux-ports-headers-2.6.28-4 linux-libc-dev linux-image-2.6.28-4-386 linux-headers-2.6.28-4-386 linux-image-debug-2.6.28-4-386 linux-image-2.6.28-4-hppa32 linux-headers-2.6.28-4-hppa32 linux-image-debug-2.6.28-4-hppa32 linux-image-2.6.28-4-hppa64 linux-headers-2.6.28-4-hppa64 linux-image-debug-2.6.28-4-hppa64 linux-image-2.6.28-4-ia64-generic linux-headers-2.6.28-4-ia64-generic linux-image-debug-2.6.28-4-ia64-generic linux-image-2.6.28-4-powerpc linux-headers-2.6.28-4-powerpc linux-image-debug-2.6.28-4-powerpc linux-image-2.6.28-4-powerpc-smp linux-headers-2.6.28-4-powerpc-smp linux-image-debug-2.6.28-4-powerpc-smp linux-image-2.6.28-4-powerpc64-smp linux-headers-2.6.28-4-powerpc64-smp linux-image-debug-2.6.28-4-powerpc64-smp linux-image-2.6.28-4-sparc64 linux-headers-2.6.28-4-sparc64 linux-image-debug-2.6.28-4-sparc64 linux-image-2.6.28-4-sparc64-smp linux-headers-2.6.28-4-sparc64-smp linux-image-debug-2.6.28-4-sparc64-smp
Architecture: source
Version: 2.6.28-4.10
Distribution: jaunty
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Luke Yelavich <themuso at ubuntu.com>
Description:
linux-headers-2.6.28-4-386 - Linux kernel headers for version 2.6.28 on i386
linux-headers-2.6.28-4-hppa32 - Linux kernel headers for version 2.6.28 on 32-bit HP PA-RISC SMP
linux-headers-2.6.28-4-hppa64 - Linux kernel headers for version 2.6.28 on 64-bit HP PA-RISC SMP
linux-headers-2.6.28-4-ia64-generic - Linux kernel headers for version 2.6.28 on IA-64 SMP
linux-headers-2.6.28-4-powerpc - Linux kernel headers for version 2.6.28 on 32-bit PowerPC
linux-headers-2.6.28-4-powerpc-smp - Linux kernel headers for version 2.6.28 on 32-bit PowerPC SMP
linux-headers-2.6.28-4-powerpc64-smp - Linux kernel headers for version 2.6.28 on 64-bit PowerPC SMP
linux-headers-2.6.28-4-sparc64 - Linux kernel headers for version 2.6.28 on 64-bit UltraSPARC
linux-headers-2.6.28-4-sparc64-smp - Linux kernel headers for version 2.6.28 on 64-bit UltraSPARC SMP
linux-image-2.6.28-4-386 - Linux kernel image for version 2.6.28 on i386
linux-image-2.6.28-4-hppa32 - Linux kernel image for version 2.6.28 on 32-bit HP PA-RISC SMP
linux-image-2.6.28-4-hppa64 - Linux kernel image for version 2.6.28 on 64-bit HP PA-RISC SMP
linux-image-2.6.28-4-ia64-generic - Linux kernel image for version 2.6.28 on IA-64 SMP
linux-image-2.6.28-4-powerpc - Linux kernel image for version 2.6.28 on 32-bit PowerPC
linux-image-2.6.28-4-powerpc-smp - Linux kernel image for version 2.6.28 on 32-bit PowerPC SMP
linux-image-2.6.28-4-powerpc64-smp - Linux kernel image for version 2.6.28 on 64-bit PowerPC SMP
linux-image-2.6.28-4-sparc64 - Linux kernel image for version 2.6.28 on 64-bit UltraSPARC
linux-image-2.6.28-4-sparc64-smp - Linux kernel image for version 2.6.28 on 64-bit UltraSPARC SMP
linux-image-debug-2.6.28-4-386 - Linux kernel debug image for version 2.6.28 on i386
linux-image-debug-2.6.28-4-hppa32 - Linux kernel debug image for version 2.6.28 on 32-bit HP PA-RISC
linux-image-debug-2.6.28-4-hppa64 - Linux kernel debug image for version 2.6.28 on 64-bit HP PA-RISC
linux-image-debug-2.6.28-4-ia64-generic - Linux kernel debug image for version 2.6.28 on IA-64 SMP
linux-image-debug-2.6.28-4-powerpc - Linux kernel debug image for version 2.6.28 on 32-bit PowerPC
linux-image-debug-2.6.28-4-powerpc-smp - Linux kernel debug image for version 2.6.28 on 32-bit PowerPC SMP
linux-image-debug-2.6.28-4-powerpc64-smp - Linux kernel debug image for version 2.6.28 on 64-bit PowerPC SMP
linux-image-debug-2.6.28-4-sparc64 - Linux kernel debug image for version 2.6.28 on 64-bit UltraSPARC
linux-image-debug-2.6.28-4-sparc64-smp - Linux kernel debug image for version 2.6.28 on 64-bit UltraSPARC
linux-libc-dev - Linux Kernel Headers for development
linux-ports-doc-2.6.28 - Linux kernel specific documentation for version 2.6.28
linux-ports-headers-2.6.28-4 - Header files related to Linux kernel version 2.6.28
linux-ports-source-2.6.28 - Linux kernel source for version 2.6.28 with Ubuntu patches
Launchpad-Bugs-Fixed: 193970 255651 288385 315252 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 330813 331848
Changes:
linux-ports (2.6.28-4.10) jaunty; urgency=low
.
[ Luke Yelavich ]
.
* set LEGACY_PTY_COUNT to 0 as per most mainline jaunty kernels
* build the fuse module into the kernel, as per mainline jaunty kernels
* add hid-* modules to input-modules udeb
.
Rebase on top of jaunty 2.6.28-9.29:
.
[ Andy Whitcroft ]
.
* link-headers -- only link directories which do not already exist
- LP: #315252
.
[ Daniel Marjamäki ]
.
* SAUCE: (drop after 2.6.28) netxen: fix memory leak in
drivers/net/netxen_nic_init.c
- LP: #330813
.
[ Dhananjay Phadke ]
.
* SAUCE: (drop after 2.6.28) netxen: fix endianness in firmware commands
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix ipv6 offload and tx cleanup
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix link speed reporting for some
boards
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: firmware init fix
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: cleanup mac list on driver unload
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: hold tx lock while sending firmware
commands
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: handle dma mapping failures
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: avoid invalid iounmap
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: include ipv6.h (fixes build failure)
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix vlan tso/checksum offload
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: reduce memory footprint
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: revert jumbo ringsize
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: fix msi-x interrupt handling
- LP: #330813
* SAUCE: (drop after 2.6.28) netxen: remove pcie workaround
- LP: #330813
.
[ Hannes Eder ]
.
* SAUCE: (drop after 2.6.28) drivers/net/netxen: fix sparse warnings: use
NULL pointer instead of plain integer
- LP: #330813
.
[ Huaxu Wan ]
.
* SAUCE: report rfkill changes event if interface is down
- LP: #193970
.
[ Tim Gardner ]
.
* MV78XX0 must specify a target in the vars definition.
.
[ Upstream Kernel Changes ]
.
* Revert "ext4: wait on all pending commits in ext4_sync_fs()"
* jbd2: Fix return value of jbd2_journal_start_commit()
* jbd2: Avoid possible NULL dereference in
jbd2_journal_begin_ordered_truncate()
* ext4: Fix to read empty directory blocks correctly in 64k
* ext4: Fix lockdep warning
* ext4: Initialize preallocation list_head's properly
* ext4: Implement range_cyclic in ext4_da_writepages instead of
write_cache_pages
* ext4: Fix NULL dereference in ext4_ext_migrate()'s error handling
* ext4: Add fallback for find_group_flex
* ext4: Fix deadlock in ext4_write_begin() and ext4_da_write_begin()
* Added mv78xx0 flavor
.
[ Alexey Starikovskiy ]
.
* SAUCE: ACPI: EC: Limit workaround for ASUS notebooks even more
- LP: #288385
.
[ Scott James Remnant ]
.
* SAUCE: Auto-load esp module when device opened.
* SAUCE: Auto-load bridge module when socket opened.
* SAUCE: Auto-load af_netlink module when socket opened.
* SAUCE: Auto-load wanrouter module when socket opened.
* SAUCE: Auto-load ip_queue module when socket opened.
* SAUCE: Auto-load ip6_queue module when socket opened.
* SAUCE: Auto-load cn module when socket opened.
* SAUCE: Auto-load scsi_transport_iscsi module when socket opened.
* SAUCE: Auto-load ftl module when device opened.
* SAUCE: Auto-load pcd module when device opened.
* SAUCE: Auto-load pf module when device opened.
* SAUCE: Auto-load nftl module when device opened.
* SAUCE: Auto-load mousedev module when psaux device opened.
* SAUCE: Auto-load mousedev module when /dev/input/mice opened.
* SAUCE: Auto-load rng-core module when device opened.
* SAUCE: Auto-load openprom module when device opened.
* SAUCE: Auto-load applicom module when device opened.
* SAUCE: Auto-load toshiba module when device opened.
* SAUCE: Auto-load cyclades module when device opened.
* SAUCE: Auto-load riscom8 module when device opened.
* SAUCE: Auto-load specialix module when device opened.
* SAUCE: Auto-load videodev module when device opened.
* SAUCE: Auto-load i2c_dev module when device opened.
* SAUCE: Auto-load mtdchar module when device opened.
* SAUCE: Auto-load pt module when device opened.
* SAUCE: Auto-load pg module when device opened.
* SAUCE: Auto-load cdc_acm module when device opened.
* SAUCE: Auto-load msr module when device opened.
* SAUCE: Auto-load cpuid module when device opened.
* SAUCE: quickcam: Enable double-buffering by default
* SAUCE: libata: Ignore HPA by default.
* SAUCE: hostap: Change initial operation mode to managed (infra)
* SAUCE: floppy: Provide a PnP device table in the module.
- LP: #255651
* SAUCE: Auto-load mwave module when device opened.
* Build CONFIG_FUSE_FS into kernel, not as module.
.
[ Stefan Bader ]
.
* Enable build of ext4 as a module on LPIA
- LP: #331848
.
[ Tim Gardner ]
.
* Update configs to fix LPIA FTBS
Checksums-Sha1:
e46a79831a3ef6abecb3d1f7a64c071b691df2d4 2321 linux-ports_2.6.28-4.10.dsc
2817a526f4955cfa96d940bd14b27e95e3069b5a 7601002 linux-ports_2.6.28-4.10.diff.gz
Checksums-Sha256:
2e6ec84bd06f7b3e3ea5e4e678b7806587e9da229a0be4f92ab8cadc27a3857d 2321 linux-ports_2.6.28-4.10.dsc
fc37244ece87e10f69df4ee567785de40d1fe9943fdd884bec130a27e28f8d87 7601002 linux-ports_2.6.28-4.10.diff.gz
Files:
cb6bb00a394d19e7fd6b22accb3a3a09 2321 devel optional linux-ports_2.6.28-4.10.dsc
75863ee4f3cba862097323612d154a04 7601002 devel optional linux-ports_2.6.28-4.10.diff.gz
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)
iEYEARECAAYFAkm0uV0ACgkQjVefwtBjIM4yagCdEPPXmPFm8tzaoW7k/cL5+c+G
oo0AoJpKe1Wv2NPHmoRI/uD0F27xnqjL
=mW8W
-----END PGP SIGNATURE-----
More information about the Jaunty-changes
mailing list