[ubuntu/jaunty] ntfs-3g 1:1.2531-1.1ubuntu1 (Accepted)

Chris Coulson chrisccoulson at googlemail.com
Tue Nov 18 15:30:16 GMT 2008


ntfs-3g (1:1.2531-1.1ubuntu1) jaunty; urgency=low

  * Merge from debian unstable, remaining changes (LP: #298141):
    - Add udeb shlibs entries for libntfs-3g31-udeb.
    - Create libntfs3g31-udeb and ntfs-3g-udeb.
    - Copy ntfs-3g into the initramfs. If ntfs-3g is used to mount the root
      filesystem (either directly or via a loopback mount), load the fuse
      module beforehand, and save ntfs-3g's PID (indirectly) in
      /var/run/sendsigs.omit.
    - Move ntfs-3g to /bin.
    - Move libntfs-3g.so.* to /lib. Adjust libntfs-3g.so symlink to match.
    - Add /sbin/mount.ntfs symlink to /bin/ntfs-3g.
    - Add a symlink for the mount.ntfs manual page too.
    - Pass basenames rather than full paths to pidof; create
      /dev/.initramfs/varrun if necessary.
    - Always add ntfs and ntfs-3g to sendsigs.omit.
    - Build against the external fuse libraries and add dependency on
      fuse-utils.
    - Ensure ntfs-3g flushed dirty write data back to device
      added ntfs-3f mount option "syncio" which opens the underlying
      filesystem used by fuse with O_SYNC to ensure dirty write data is
      written back to ntfs immediately. This allows us to remove the
      vm.dirty sysctl hacks from wubi.

ntfs-3g (1:1.2531-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * The hal standard configuration no longer allows the 'locale=' mount option
    for NTFS, as the Linux kernel NTFS driver does not support this option.
    As a workaround we install our own fdi file 20-ntfs-3g-policy.fdi to
    /usr/share/hal/fdi/policy/10osvendor which will add this mount option back
    and make hal use ntfs-3g as default fs driver.

ntfs-3g (1:1.2531-1) unstable; urgency=low

  * New upstream release.
  * Bump library package name to match current soname.
  * Bump Standards-Version to 3.8.0.

Date: Fri, 14 Nov 2008 18:18:03 +0000
Changed-By: Chris Coulson <chrisccoulson at googlemail.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Martin Pitt <martin.pitt at ubuntu.com>
https://launchpad.net/ubuntu/jaunty/+source/ntfs-3g/1:1.2531-1.1ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

Format: 1.8
Date: Fri, 14 Nov 2008 18:18:03 +0000
Source: ntfs-3g
Binary: ntfs-3g libntfs-3g-dev libntfs-3g31 ntfs-3g-udeb libntfs-3g31-udeb
Architecture: source
Version: 1:1.2531-1.1ubuntu1
Distribution: jaunty
Urgency: low
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Chris Coulson <chrisccoulson at googlemail.com>
Description: 
 libntfs-3g-dev - ntfs-3g filesystem in userspace (FUSE) library headers
 libntfs-3g31 - ntfs-3g filesystem in userspace (FUSE) library
 libntfs-3g31-udeb - ntfs-3g filesystem in userspace (FUSE) library (udeb)
 ntfs-3g    - read-write NTFS driver for FUSE
 ntfs-3g-udeb - read-write NTFS driver for FUSE (udeb)
Launchpad-Bugs-Fixed: 298141
Changes: 
 ntfs-3g (1:1.2531-1.1ubuntu1) jaunty; urgency=low
 .
   * Merge from debian unstable, remaining changes (LP: #298141):
     - Add udeb shlibs entries for libntfs-3g31-udeb.
     - Create libntfs3g31-udeb and ntfs-3g-udeb.
     - Copy ntfs-3g into the initramfs. If ntfs-3g is used to mount the root
       filesystem (either directly or via a loopback mount), load the fuse
       module beforehand, and save ntfs-3g's PID (indirectly) in
       /var/run/sendsigs.omit.
     - Move ntfs-3g to /bin.
     - Move libntfs-3g.so.* to /lib. Adjust libntfs-3g.so symlink to match.
     - Add /sbin/mount.ntfs symlink to /bin/ntfs-3g.
     - Add a symlink for the mount.ntfs manual page too.
     - Pass basenames rather than full paths to pidof; create
       /dev/.initramfs/varrun if necessary.
     - Always add ntfs and ntfs-3g to sendsigs.omit.
     - Build against the external fuse libraries and add dependency on
       fuse-utils.
     - Ensure ntfs-3g flushed dirty write data back to device
       added ntfs-3f mount option "syncio" which opens the underlying
       filesystem used by fuse with O_SYNC to ensure dirty write data is
       written back to ntfs immediately. This allows us to remove the
       vm.dirty sysctl hacks from wubi.
 .
 ntfs-3g (1:1.2531-1.1) unstable; urgency=low
 .
   * Non-maintainer upload.
   * The hal standard configuration no longer allows the 'locale=' mount option
     for NTFS, as the Linux kernel NTFS driver does not support this option.
     As a workaround we install our own fdi file 20-ntfs-3g-policy.fdi to
     /usr/share/hal/fdi/policy/10osvendor which will add this mount option back
     and make hal use ntfs-3g as default fs driver.
 .
 ntfs-3g (1:1.2531-1) unstable; urgency=low
 .
   * New upstream release.
   * Bump library package name to match current soname.
   * Bump Standards-Version to 3.8.0.
Checksums-Sha1: 
 6fdb63f1cc18de7e947aa1f44bfdf1eede387e44 1250 ntfs-3g_1.2531-1.1ubuntu1.dsc
 24c814700490665396e6e667870a6ba518145e02 651157 ntfs-3g_1.2531.orig.tar.gz
 ae8c0dabb4535207fae308daf18b10d6003f4f49 14089 ntfs-3g_1.2531-1.1ubuntu1.diff.gz
Checksums-Sha256: 
 460bbffdb30f245dc241649018fa8081bb86cef703b90a73472bd37142f15d2a 1250 ntfs-3g_1.2531-1.1ubuntu1.dsc
 e5d834f0be7efdedc36e45808554dafcb53f70b2fa2d511df5b9ae23e6807bbe 651157 ntfs-3g_1.2531.orig.tar.gz
 492e8304d22b584d8153a7f17367787d3ea7b73f9f0f533cf5fc29a5d0d86578 14089 ntfs-3g_1.2531-1.1ubuntu1.diff.gz
Files: 
 002764eb9d2c3567e92203873c91c4d3 1250 otherosfs optional ntfs-3g_1.2531-1.1ubuntu1.dsc
 69374cd09803c5fdbb5dabd1d704b9fe 651157 otherosfs optional ntfs-3g_1.2531.orig.tar.gz
 895493dc06437a26859b53e6f6c61227 14089 otherosfs optional ntfs-3g_1.2531-1.1ubuntu1.diff.gz
Original-Maintainer: Adam Cécile (Le_Vert) <gandalf at le-vert.net>

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.9 (GNU/Linux)

iEYEARECAAYFAkki3nMACgkQDecnbV4Fd/I8XACfYX0EWz/6GVg+Or+Lf1B8OKOn
CxYAoN8KdUcI81aH0LbeWjKNYkdFhrO4
=+fOM
-----END PGP SIGNATURE-----


More information about the Jaunty-changes mailing list