Accepted pose 3.5-9.1 (source)
Ubuntu Installer
archive at ubuntu.com
Sat Jun 16 13:35:29 BST 2007
Accepted:
pose 3.5-9.1 was ACCEPTED.
Component: multiverse Section: otherosfs
Origin: Debian/unstable
Format: 1.7
Date: Sat, 16 Jun 2007 13:26:56 +0100
Source: pose
Binary: pose, pose-profile, pose-doc
Architecture: source
Version: 3.5-9.1
Distribution: gutsy
Urgency: medium
Maintainer: Lucas Wall <lwall at debian.org>
Changed-By: Ubuntu Archive Auto-Sync <archive at ubuntu.com>
Description:
pose - emulates the hardware for most Palm Computing Platform devices
Closes: 52676 61909 99102 102299 103603 113077 125172 131486 195373 195438 205230 216485 227723 246932 269112 297258 297267 303199 316898 318900 318902 343015 346850 385827
Changes:
pose (3.5-9.1) unstable; urgency=medium
.
* Non-maintainer upload.
* Make package build with gcc 4.1. (Closes: #343015, #385827)
* In MAKE_ONE_SCALAR_ALIAS_ASSIGNMENT_OPERATOR and
MAKE_ONE_SCALAR_PROXY_ASSIGNMENT_OPERATOR, always cast the value via
long, since gcc no longer accepts a direct cast from void * to, say,
char. (It is not likely that any of these code paths are actually ever
getting touched, but they still need to compile.)
* Don't set CC=gcc-3.4 CXX=g++-3.4 when building.
* Remove build-dependency on gcc-3.4 and g++-3.4.
.
pose (3.5-9) unstable; urgency=low
.
* Removed dependancy on xlibs-dev. (closes: #346850)
.
pose (3.5-8) unstable; urgency=low
.
* Fixed deadlock when doing hotsync through pesudo tty. (closes: #297258)
* Fixed "PADP TX Unexpected packet" when doing hotsync. (closes: #297267)
Thanks YuLei!
* Updated pose to use zlib. Thanks Nate Eldredge! (closes: #303199)
* Fixed va_list portability issue. Thanks Nathan Hand! (closes: #318900)
* Pose responds to pen events. (closes: #318902)
* Unix serial port file descriptor corrections. (closes: #316898)
* Builds with gcc 3.4.
.
pose (3.5-7) unstable; urgency=low
.
* New maintainer (closes: #269112)
* Builds with gcc 3.3 (closes: #246932)
* Builds with libfltk 1.1 (closes: #227723)
.
pose (3.5-6) unstable; urgency=low
.
* Orphan package (set maintainer to Debian QA Group
<packages at qa.debian.org>)
.
pose (3.5-5) unstable; urgency=low
.
* Revert the code to 3.5-3 package:
+ Use gcc 2.95, not gcc 3.3
+ Use fltk 1, not fltk 1.1
* Fix typo on manual page, thanks to Mike Markley (Closes: #216485)
* Added versioned Build-Depends
* Debhelper compatibility set to version 4
* tmp installation is debian/pose, not debian/tmp
.
pose (3.5-4) unstable; urgency=low
.
* Use fltk 1.1 instead of fltk 1:
+ Few ideas 'stolen' from FreeBSD patches by Helge Oldach
+ Added fluid to Build-Depends
+ Use .H includes instead of .h
* Use gcc 3.3 instead of old gcc 2.95 (Closes: #205230)
+ Thanks to Aaron M. Ucko for its help on this issue
* Build for Architecture: any
* Bumped Standards-Version: to 3.6.1 (no changes needed)
* Changed maintainer's email address
.
pose (3.5-3) unstable; urgency=low
.
* New maintainer, close ITA bug (Closes: #195373).
* Changed download dir to sourceforge project page.
* Updated BuildUnix/config.{sub,guess}.
* Added gcc-2.95, g++-2.95 to Build-Depends: (Closes: #195438).
* Bumped Standards-Version: to 3.6.0.
* Added pose manpage.
* Sponsored by Amaya Rodrigo Sastre <amaya at debian.org>. Changed Depends: to
libfltk1-dev so it does build. Let's find a solution for this.
.
pose (3.5-2) unstable; urgency=low
.
* Orphaned package (set maintainer to packages at qa.debian.org)
.
pose (3.5-1) unstable; urgency=low
.
* New upstream version
.
pose (3.4-1) unstable; urgency=low
.
* New upstream version (closes: #131486)
.
pose (3.3-2) unstable; urgency=low
.
* Build on mipsel again (closes: #125172)
.
pose (3.3-1) unstable; urgency=low
.
* New upstream version
* Remove redundant copy of GPL (closes: #113077)
* Include scripting modules (closes: #103603)
* List architectures instead of using "any", and exclude arm (see bug
91911). This will let me downgrade the "serious" bug keeping
updated versions of pose out of testing
.
pose (3.2-2) unstable; urgency=low
.
* Fixed build depends (closes: #102299)
.
pose (3.2-1) unstable; urgency=low
.
* New upstream version
.
pose (3.1-2) unstable; urgency=low
.
* Add build-depends (closes: #99102)
.
pose (3.1-1) unstable; urgency=low
.
* New upstream release
.
pose (3.0a8-1) unstable; urgency=low
.
* New upstream version
.
pose (3.0a7-3) unstable; urgency=low
.
* Fix skin search path again. Now searches in /usr/share/pose/Skins and
$POSER_DIR/Skins (if POSER_DIR is unset, $HOME is used instead)
.
pose (3.0a7-2) unstable; urgency=low
.
* Fix skin search path
.
pose (3.0a7-1) unstable; urgency=low
.
* New upstream version
.
pose (3.0a6-1) unstable; urgency=low
.
* New upstream version
* ROM Transfer.prc now included (closes: #61909)
* Skins split into separate package (pose-skins)
.
pose (3.0a5-1) unstable; urgency=low
.
* New upstream version
* Remove GL dependency (no longer necessary with new libfltk1)
.
pose (3.0a4-1) unstable; urgency=low
.
* New upstream version (closes: #52676)
.
pose (3.0a3-3) frozen unstable; urgency=low
.
* Change maintainer email address
* Link against libGL instead of libMesaGL, thus letting the package be
installed on systems that use Utah GLX instead of Mesa
* ObFrozen: no code changes, just fixing the dependencies
.
pose (3.0a3-2) unstable; urgency=low
.
* Fixed crash on startup when using non-EZ roms
* Made HostFPrintF compile on Alpha (still doesn't work though)
* Fixed dependency on mesag3
.
pose (3.0a3-1) unstable; urgency=low
.
* New upstream release (closes #41288)
.
pose (2.1d29-1) unstable; urgency=low
.
* New upstream release
.
pose (2.1d28-2) unstable; urgency=low
.
* debian/rules: fixed problems in "clean" target
.
pose (2.1d28-1) unstable; urgency=low
.
* Initial Release.
Files:
c69b10798e524b999739bf1950125655 3162363 contrib/otherosfs optional pose_3.5.orig.tar.gz
5e1bcdf1521f1425a5d444b1483bbe5f 187612 contrib/otherosfs optional pose_3.5-9.1.diff.gz
ae5028f20be688978adecc1f701b6a0e 639 contrib/otherosfs optional pose_3.5-9.1.dsc
More information about the gutsy-changes
mailing list