pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
Paul Menzel
pmenzel at molgen.mpg.de
Sun Mar 29 09:02:21 UTC 2020
Dear fwts folks,
Linux 5.6-rc3 (and before and later) with
[ 0.000000] DMI: Micro-Star International Co., Ltd.
MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.MR 12/02/2019
logs the error below.
pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
According to the Linux folks this is a firmware limitation (and
limitation of missing datasheets from AMD).
Could such a check be integrated into fwts?
Kind regards,
Paul
-------------- next part --------------
[ 0.000000] Linux version 5.6.0-rc3-00225-g66e2d30ba7b5 (root at f190a37d1577) (gcc version 9.2.1 20200224 (Debian 9.2.1-30)) #43 SMP Fri Feb 28 13:54:47 UTC 2020
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-5.6.0-rc3-00225-g66e2d30ba7b5 root=UUID=8883f733-2248-47e0-90b9-ee5384f18d62 ro quiet noisapnp cryptomgr.notests random.trust_cpu=on selinux=0 apparmor=0 kmemleak=off
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009d7ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000009d80000-0x0000000009ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20afff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000000a20b000-0x000000000affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000eba9efff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000eba9f000-0x00000000ebb94fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ebb95000-0x00000000ec013fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ec014000-0x00000000ec11efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000ec11f000-0x00000000ecf38fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ecf39000-0x00000000ecfd9fff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000ecfda000-0x00000000eeffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ef000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fd000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000038effffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000038f000000-0x000000040effffff] reserved
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.70 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xec09b000 ACPI=0xec09b000 SMBIOS=0xece25000 MEMATTR=0xe8c5a698 ESRT=0xe8c67f98
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Micro-Star International Co., Ltd. MS-7A37/B350M MORTAR (MS-7A37), BIOS 1.MR 12/02/2019
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] last_pfn = 0x38f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFE0000000 write-back
[ 0.000000] 3 base 0000E0000000 mask FFFFF0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000410000000 aka 16640M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.000000] e820: update [mem 0xf0000000-0xffffffff] usable ==> reserved
[ 0.000000] last_pfn = 0xef000 max_arch_pfn = 0x400000000
[ 0.000000] esrt: Reserving ESRT space from 0x00000000e8c67f98 to 0x00000000e8c67fd0.
[ 0.000000] e820: update [mem 0xe8c67000-0xe8c67fff] usable ==> reserved
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x1cf201000, 0x1cf201fff] PGTABLE
[ 0.000000] BRK [0x1cf202000, 0x1cf202fff] PGTABLE
[ 0.000000] BRK [0x1cf203000, 0x1cf203fff] PGTABLE
[ 0.000000] BRK [0x1cf204000, 0x1cf204fff] PGTABLE
[ 0.000000] BRK [0x1cf205000, 0x1cf205fff] PGTABLE
[ 0.000000] BRK [0x1cf206000, 0x1cf206fff] PGTABLE
[ 0.000000] BRK [0x1cf207000, 0x1cf207fff] PGTABLE
[ 0.000000] BRK [0x1cf208000, 0x1cf208fff] PGTABLE
[ 0.000000] BRK [0x1cf209000, 0x1cf209fff] PGTABLE
[ 0.000000] BRK [0x1cf20a000, 0x1cf20afff] PGTABLE
[ 0.000000] BRK [0x1cf20b000, 0x1cf20bfff] PGTABLE
[ 0.000000] BRK [0x1cf20c000, 0x1cf20cfff] PGTABLE
[ 0.000000] Secure boot could not be determined
[ 0.000000] RAMDISK: [mem 0x35649000-0x36b1bfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000EC09B000 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x00000000EC09B0A0 0000C4 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000EC0A2BA8 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000EC09B200 0079A7 (v02 ALASKA A M I 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x00000000EC107E00 000040
[ 0.000000] ACPI: APIC 0x00000000EC0A2CC0 00015E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000EC0A2E20 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x00000000EC0A2E68 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: SSDT 0x00000000EC0A2F08 000060 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
[ 0.000000] ACPI: SSDT 0x00000000EC0A2F68 005419 (v02 AMD AmdTable 00000002 MSFT 04000000)
[ 0.000000] ACPI: SSDT 0x00000000EC0A8388 00366B (v01 AMD AMD AOD 00000001 INTL 20120913)
[ 0.000000] ACPI: MCFG 0x00000000EC0AB9F8 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x00000000EC0ABA38 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: UEFI 0x00000000EC0ABA70 000042 (v01 ALASKA A M I 00000002 01000013)
[ 0.000000] ACPI: VFCT 0x00000000EC0ABAB8 00D484 (v01 ALASKA A M I 00000001 AMD 31504F47)
[ 0.000000] ACPI: IVRS 0x00000000EC0B8F40 0000D0 (v02 AMD AMD IVRS 00000001 AMD 00000000)
[ 0.000000] ACPI: SSDT 0x00000000EC0B9010 000854 (v01 AMD AMD CPU 00000001 AMD 00000001)
[ 0.000000] ACPI: CRAT 0x00000000EC0B9868 000810 (v01 AMD AMD CRAT 00000001 AMD 00000001)
[ 0.000000] ACPI: CDIT 0x00000000EC0BA078 000029 (v01 AMD AMD CDIT 00000001 AMD 00000001)
[ 0.000000] ACPI: SSDT 0x00000000EC0BA0A8 000C34 (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000EC0BACE0 0010AC (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000EC0BBD90 001D4A (v01 AMD AmdTable 00000001 INTL 20120913)
[ 0.000000] ACPI: SSDT 0x00000000EC0BDAE0 0000BF (v01 AMD AMD PT 00001000 INTL 20120913)
[ 0.000000] ACPI: WSMT 0x00000000EC0BDBA0 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000038effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x38efe9000-0x38effffff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000038effffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009ffff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000009d7ffff]
[ 0.000000] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
[ 0.000000] node 0: [mem 0x000000000a20b000-0x000000000affffff]
[ 0.000000] node 0: [mem 0x000000000b020000-0x00000000eba9efff]
[ 0.000000] node 0: [mem 0x00000000ebb95000-0x00000000ec013fff]
[ 0.000000] node 0: [mem 0x00000000ecfda000-0x00000000eeffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000038effffff]
[ 0.000000] Zeroed struct page in unavailable ranges: 13256 pages
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000038effffff]
[ 0.000000] On node 0 totalpages: 3656760
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 30 pages reserved
[ 0.000000] DMA zone: 3999 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 15155 pages used for memmap
[ 0.000000] DMA32 zone: 969881 pages, LIFO batch:63
[ 0.000000] Normal zone: 41920 pages used for memmap
[ 0.000000] Normal zone: 2682880 pages, LIFO batch:63
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 5, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 6, version 33, address 0xfec01000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 32 CPUs, 28 hotplug CPUs
[ 0.000000] [mem 0xf0000000-0xf7ffffff] available for PCI devices
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[ 0.000000] After setup_arch
[ 0.000000] After setup_command_line
[ 0.000000] After setup_nr_cpu_ids
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:32 nr_node_ids:1
[ 0.000000] percpu: Embedded 54 pages/cpu s182808 r8192 d30184 u262144
[ 0.000000] pcpu-alloc: s182808 r8192 d30184 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
[ 0.000000] pcpu-alloc: [0] 16 17 18 19 20 21 22 23 [0] 24 25 26 27 28 29 30 31
[ 0.000000] After setup_per_cpu_areas
[ 0.000000] After smp_perpare_boot_cpu
[ 0.000000] After boot_cpu_hotplug_init
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 3599591
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-5.6.0-rc3-00225-g66e2d30ba7b5 root=UUID=8883f733-2248-47e0-90b9-ee5384f18d62 ro quiet noisapnp cryptomgr.notests random.trust_cpu=on selinux=0 apparmor=0 kmemleak=off
[ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 14161756K/14627040K available (12292K kernel code, 1406K rwdata, 4408K rodata, 1628K init, 7440K bss, 465284K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=32, Nodes=1
[ 0.000000] After mm_init
[ 0.000000] ftrace: allocating 39173 entries in 154 pages
[ 0.000000] ftrace: allocated 154 pages with 4 groups
[ 0.000000] After sched_init
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=32.
[ 0.000000] Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=32
[ 0.000000] After rcu_init
[ 0.000000] NR_IRQS: 4352, nr_irqs: 1224, preallocated irqs: 16
[ 0.000000] rcu: Offload RCU callbacks from CPUs: (none).
[ 0.000000] random: crng done (trusting CPU's manufacturer)
[ 0.000000] After add_latent_entropy
[ 0.000000] After add_device_randomness
[ 0.000000] After boot_init_stack_canary
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] printk: console [tty0] enabled
[ 0.000000] ACPI: Core revision 20200110
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] APIC: Switch to symmetric I/O mode setup
[ 0.002000] Switched APIC routing to physical flat.
[ 0.003000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.010000] tsc: PIT calibration matches HPET. 2 loops
[ 0.010000] tsc: Detected 3499.998 MHz processor
[ 0.000003] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32734efdd03, max_idle_ns: 440795244944 ns
[ 0.000005] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.99 BogoMIPS (lpj=3499998)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.003291] LSM: Security Framework initializing
[ 0.003502] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.003536] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.003613] *** VALIDATE tmpfs ***
[ 0.004144] *** VALIDATE proc ***
[ 0.004238] *** VALIDATE cgroup ***
[ 0.004239] *** VALIDATE cgroup2 ***
[ 0.004586] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 512
[ 0.004587] Last level dTLB entries: 4KB 1536, 2MB 1536, 4MB 768, 1GB 0
[ 0.004589] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
[ 0.004590] Spectre V2 : Mitigation: Full AMD retpoline
[ 0.004591] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.004592] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[ 0.004593] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[ 0.004764] Freeing SMP alternatives memory: 32K
[ 0.004764] After check_bugs
[ 0.005010] After acpi_subsystem_init
[ 0.005010] After arch_post_acpi_subsys_init
[ 0.005011] After sfi_init_late
[ 0.005012] After rcu_scheduler_starting
[ 0.005122] After find_task_by_pid_ns
[ 0.005124] After numa_default_policy
[ 0.005149] After rcu_read_lock
[ 0.005150] After rcu_read_unlock
[ 0.005151] After kthreadd_done
[ 0.107676] smpboot: CPU0: AMD Ryzen 3 2200G with Radeon Vega Graphics (family: 0x17, model: 0x11, stepping: 0x0)
[ 0.108004] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
[ 0.108004] ... version: 0
[ 0.108004] ... bit width: 48
[ 0.108004] ... generic registers: 6
[ 0.108004] ... value mask: 0000ffffffffffff
[ 0.108004] ... max period: 00007fffffffffff
[ 0.108004] ... fixed-purpose events: 0
[ 0.108004] ... event mask: 000000000000003f
[ 0.108004] rcu: Hierarchical SRCU implementation.
[ 0.108004] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.108676] smp: Bringing up secondary CPUs ...
[ 0.108862] x86: Booting SMP configuration:
[ 0.108864] .... node #0, CPUs: #1
[ 0.110011] After schedule_preempt_disabled
[ 0.110155] #2 #3
[ 0.113062] smp: Brought up 1 node, 4 CPUs
[ 0.113062] smpboot: Max logical packages: 8
[ 0.113062] smpboot: Total of 4 processors activated (27999.98 BogoMIPS)
[ 0.114371] devtmpfs: initialized
[ 0.114371] x86/mm: Memory block size: 128MB
[ 0.116469] PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20afff] (45056 bytes)
[ 0.116469] PM: Registering ACPI NVS region [mem 0xec014000-0xec11efff] (1093632 bytes)
[ 0.116469] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.116469] futex hash table entries: 8192 (order: 7, 524288 bytes, linear)
[ 0.118177] pinctrl core: initialized pinctrl subsystem
[ 0.118241] PM: RTC time: 14:35:44, date: 2020-02-28
[ 0.118242] thermal_sys: Registered thermal governor 'fair_share'
[ 0.118242] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.118243] thermal_sys: Registered thermal governor 'step_wise'
[ 0.118243] thermal_sys: Registered thermal governor 'user_space'
[ 0.118716] NET: Registered protocol family 16
[ 0.118840] audit: initializing netlink subsys (disabled)
[ 0.118844] audit: type=2000 audit(1582900543.128:1): state=initialized audit_enabled=0 res=1
[ 0.118844] cpuidle: using governor menu
[ 0.119114] ACPI: bus type PCI registered
[ 0.119351] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.119353] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.119362] PCI: Using configuration type 1 for base access
[ 0.121183] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.121183] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.122028] alg: self-tests disabled
[ 0.123039] cryptd: max_cpu_qlen set to 1000
[ 0.124104] ACPI: Added _OSI(Module Device)
[ 0.124104] ACPI: Added _OSI(Processor Device)
[ 0.124104] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.124104] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.124104] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.124104] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.124104] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.129098] ACPI: DSDT successfully acquired and loaded
[ 0.135131] ACPI: 9 ACPI AML tables successfully acquired and loaded
[ 0.136360] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.138376] ACPI: Interpreter enabled
[ 0.138387] ACPI: (supports S0 S3 S5)
[ 0.138387] ACPI: Using IOAPIC for interrupt routing
[ 0.138783] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.139152] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.147785] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.147789] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[ 0.147970] acpi PNP0A08:00: _OSC: platform does not support [PME LTR]
[ 0.148152] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[ 0.148162] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.148406] PCI host bridge to bus 0000:00
[ 0.148407] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.148408] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.148409] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.148410] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.148411] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.148412] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.148413] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfcffffff window]
[ 0.148413] pci_bus 0000:00: root bus resource [mem 0x40f000000-0x7fffffffff window]
[ 0.148414] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.148424] pci 0000:00:00.0: [1022:15d0] type 00 class 0x060000
[ 0.148562] pci 0000:00:00.2: [1022:15d1] type 00 class 0x080600
[ 0.148745] pci 0000:00:01.0: [1022:1452] type 00 class 0x060000
[ 0.148863] pci 0000:00:01.2: [1022:15d3] type 01 class 0x060400
[ 0.148919] pci 0000:00:01.2: enabling Extended Tags
[ 0.148985] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[ 0.148985] pci 0000:00:01.2: pme_poll = true
[ 0.148986] pci 0000:00:01.2: after device_set_wakeup_capable()
[ 0.148989] pci 0000:00:01.2: after pci_pme_active()
[ 0.149182] pci 0000:00:08.0: [1022:1452] type 00 class 0x060000
[ 0.149300] pci 0000:00:08.1: [1022:15db] type 01 class 0x060400
[ 0.149359] pci 0000:00:08.1: enabling Extended Tags
[ 0.149422] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
[ 0.149422] pci 0000:00:08.1: pme_poll = true
[ 0.149423] pci 0000:00:08.1: after device_set_wakeup_capable()
[ 0.149426] pci 0000:00:08.1: after pci_pme_active()
[ 0.149582] pci 0000:00:08.2: [1022:15dc] type 01 class 0x060400
[ 0.149642] pci 0000:00:08.2: enabling Extended Tags
[ 0.149708] pci 0000:00:08.2: PME# supported from D0 D3hot D3cold
[ 0.149709] pci 0000:00:08.2: pme_poll = true
[ 0.149709] pci 0000:00:08.2: after device_set_wakeup_capable()
[ 0.149712] pci 0000:00:08.2: after pci_pme_active()
[ 0.149928] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[ 0.150127] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[ 0.150314] pci 0000:00:18.0: [1022:15e8] type 00 class 0x060000
[ 0.150376] pci 0000:00:18.1: [1022:15e9] type 00 class 0x060000
[ 0.150438] pci 0000:00:18.2: [1022:15ea] type 00 class 0x060000
[ 0.150491] pci 0000:00:18.3: [1022:15eb] type 00 class 0x060000
[ 0.150545] pci 0000:00:18.4: [1022:15ec] type 00 class 0x060000
[ 0.150606] pci 0000:00:18.5: [1022:15ed] type 00 class 0x060000
[ 0.150660] pci 0000:00:18.6: [1022:15ee] type 00 class 0x060000
[ 0.150714] pci 0000:00:18.7: [1022:15ef] type 00 class 0x060000
[ 0.150849] pci 0000:12:00.0: [1022:43bb] type 00 class 0x0c0330
[ 0.150879] pci 0000:12:00.0: reg 0x10: [mem 0xfcea0000-0xfcea7fff 64bit]
[ 0.150928] pci 0000:12:00.0: enabling Extended Tags
[ 0.150992] pci 0000:12:00.0: PME# supported from D3hot D3cold
[ 0.150992] pci 0000:12:00.0: pme_poll = true
[ 0.150993] pci 0000:12:00.0: after device_set_wakeup_capable()
[ 0.150996] pci 0000:12:00.0: after pci_pme_active()
[ 0.151131] pci 0000:12:00.1: [1022:43b7] type 00 class 0x010601
[ 0.151194] pci 0000:12:00.1: reg 0x24: [mem 0xfce80000-0xfce9ffff]
[ 0.151203] pci 0000:12:00.1: reg 0x30: [mem 0xfce00000-0xfce7ffff pref]
[ 0.151211] pci 0000:12:00.1: enabling Extended Tags
[ 0.151261] pci 0000:12:00.1: PME# supported from D3hot D3cold
[ 0.151262] pci 0000:12:00.1: pme_poll = true
[ 0.151262] pci 0000:12:00.1: after device_set_wakeup_capable()
[ 0.151265] pci 0000:12:00.1: after pci_pme_active()
[ 0.151367] pci 0000:12:00.2: [1022:43b2] type 01 class 0x060400
[ 0.151426] pci 0000:12:00.2: enabling Extended Tags
[ 0.151482] pci 0000:12:00.2: PME# supported from D3hot D3cold
[ 0.151483] pci 0000:12:00.2: pme_poll = true
[ 0.151483] pci 0000:12:00.2: after device_set_wakeup_capable()
[ 0.151486] pci 0000:12:00.2: after pci_pme_active()
[ 0.151625] pci 0000:00:01.2: PCI bridge to [bus 12-25]
[ 0.151630] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.151633] pci 0000:00:01.2: bridge window [mem 0xfcd00000-0xfcefffff]
[ 0.151711] pci 0000:20:00.0: [1022:43b4] type 01 class 0x060400
[ 0.151775] pci 0000:20:00.0: enabling Extended Tags
[ 0.151845] pci 0000:20:00.0: PME# supported from D3hot D3cold
[ 0.151846] pci 0000:20:00.0: pme_poll = true
[ 0.151846] pci 0000:20:00.0: after device_set_wakeup_capable()
[ 0.151849] pci 0000:20:00.0: after pci_pme_active()
[ 0.151960] pci 0000:20:01.0: [1022:43b4] type 01 class 0x060400
[ 0.152027] pci 0000:20:01.0: enabling Extended Tags
[ 0.152096] pci 0000:20:01.0: PME# supported from D3hot D3cold
[ 0.152097] pci 0000:20:01.0: pme_poll = true
[ 0.152097] pci 0000:20:01.0: after device_set_wakeup_capable()
[ 0.152100] pci 0000:20:01.0: after pci_pme_active()
[ 0.152227] pci 0000:20:04.0: [1022:43b4] type 01 class 0x060400
[ 0.152292] pci 0000:20:04.0: enabling Extended Tags
[ 0.152362] pci 0000:20:04.0: PME# supported from D3hot D3cold
[ 0.152362] pci 0000:20:04.0: pme_poll = true
[ 0.152363] pci 0000:20:04.0: after device_set_wakeup_capable()
[ 0.152365] pci 0000:20:04.0: after pci_pme_active()
[ 0.152494] pci 0000:12:00.2: PCI bridge to [bus 20-25]
[ 0.152500] pci 0000:12:00.2: bridge window [io 0xf000-0xffff]
[ 0.152503] pci 0000:12:00.2: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.152554] pci 0000:20:00.0: PCI bridge to [bus 21]
[ 0.152627] pci 0000:22:00.0: [10ec:8168] type 00 class 0x020000
[ 0.152670] pci 0000:22:00.0: reg 0x10: [io 0xf000-0xf0ff]
[ 0.152703] pci 0000:22:00.0: reg 0x18: [mem 0xfcd04000-0xfcd04fff 64bit]
[ 0.152724] pci 0000:22:00.0: reg 0x20: [mem 0xfcd00000-0xfcd03fff 64bit]
[ 0.152882] pci 0000:22:00.0: supports D1 D2
[ 0.152882] pci 0000:22:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.152883] pci 0000:22:00.0: pme_poll = true
[ 0.152883] pci 0000:22:00.0: after device_set_wakeup_capable()
[ 0.152888] pci 0000:22:00.0: after pci_pme_active()
[ 0.153118] pci 0000:20:01.0: PCI bridge to [bus 22]
[ 0.153124] pci 0000:20:01.0: bridge window [io 0xf000-0xffff]
[ 0.153127] pci 0000:20:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.153183] pci 0000:20:04.0: PCI bridge to [bus 25]
[ 0.153299] pci 0000:26:00.0: [1002:15dd] type 00 class 0x030000
[ 0.153346] pci 0000:26:00.0: reg 0x10: [mem 0x7fe0000000-0x7fefffffff 64bit pref]
[ 0.153363] pci 0000:26:00.0: reg 0x18: [mem 0x7ff0000000-0x7ff01fffff 64bit pref]
[ 0.153375] pci 0000:26:00.0: reg 0x20: [io 0xe000-0xe0ff]
[ 0.153387] pci 0000:26:00.0: reg 0x24: [mem 0xfcc00000-0xfcc7ffff]
[ 0.153407] pci 0000:26:00.0: enabling Extended Tags
[ 0.153421] pci 0000:26:00.0: BAR 0: assigned to efifb
[ 0.153527] pci 0000:26:00.0: PME# supported from D1 D2 D3hot D3cold
[ 0.153527] pci 0000:26:00.0: pme_poll = true
[ 0.153528] pci 0000:26:00.0: after device_set_wakeup_capable()
[ 0.153532] pci 0000:26:00.0: after pci_pme_active()
[ 0.153690] pci 0000:26:00.1: [1002:15de] type 00 class 0x040300
[ 0.153716] pci 0000:26:00.1: reg 0x10: [mem 0xfcc88000-0xfcc8bfff]
[ 0.153770] pci 0000:26:00.1: enabling Extended Tags
[ 0.153841] pci 0000:26:00.1: PME# supported from D1 D2 D3hot D3cold
[ 0.153842] pci 0000:26:00.1: pme_poll = true
[ 0.153842] pci 0000:26:00.1: after device_set_wakeup_capable()
[ 0.153846] pci 0000:26:00.1: after pci_pme_active()
[ 0.153953] pci 0000:26:00.2: [1022:15df] type 00 class 0x108000
[ 0.153993] pci 0000:26:00.2: reg 0x18: [mem 0xfcb00000-0xfcbfffff]
[ 0.154022] pci 0000:26:00.2: reg 0x24: [mem 0xfcc8c000-0xfcc8dfff]
[ 0.154039] pci 0000:26:00.2: enabling Extended Tags
[ 0.154210] pci 0000:26:00.3: [1022:15e0] type 00 class 0x0c0330
[ 0.154245] pci 0000:26:00.3: reg 0x10: [mem 0xfca00000-0xfcafffff 64bit]
[ 0.154307] pci 0000:26:00.3: enabling Extended Tags
[ 0.154385] pci 0000:26:00.3: PME# supported from D0 D3hot D3cold
[ 0.154386] pci 0000:26:00.3: pme_poll = true
[ 0.154386] pci 0000:26:00.3: after device_set_wakeup_capable()
[ 0.154390] pci 0000:26:00.3: after pci_pme_active()
[ 0.154493] pci 0000:26:00.4: [1022:15e1] type 00 class 0x0c0330
[ 0.154528] pci 0000:26:00.4: reg 0x10: [mem 0xfc900000-0xfc9fffff 64bit]
[ 0.154588] pci 0000:26:00.4: enabling Extended Tags
[ 0.154667] pci 0000:26:00.4: PME# supported from D0 D3hot D3cold
[ 0.154667] pci 0000:26:00.4: pme_poll = true
[ 0.154668] pci 0000:26:00.4: after device_set_wakeup_capable()
[ 0.154671] pci 0000:26:00.4: after pci_pme_active()
[ 0.154783] pci 0000:26:00.6: [1022:15e3] type 00 class 0x040300
[ 0.154809] pci 0000:26:00.6: reg 0x10: [mem 0xfcc80000-0xfcc87fff]
[ 0.154862] pci 0000:26:00.6: enabling Extended Tags
[ 0.154934] pci 0000:26:00.6: PME# supported from D0 D3hot D3cold
[ 0.154934] pci 0000:26:00.6: pme_poll = true
[ 0.154935] pci 0000:26:00.6: after device_set_wakeup_capable()
[ 0.154938] pci 0000:26:00.6: after pci_pme_active()
[ 0.155102] pci 0000:00:08.1: PCI bridge to [bus 26]
[ 0.155108] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.155111] pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfccfffff]
[ 0.155116] pci 0000:00:08.1: bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[ 0.155193] pci 0000:27:00.0: [1022:7901] type 00 class 0x010601
[ 0.155279] pci 0000:27:00.0: reg 0x24: [mem 0xfcf00000-0xfcf007ff]
[ 0.155298] pci 0000:27:00.0: enabling Extended Tags
[ 0.155389] pci 0000:27:00.0: PME# supported from D3hot D3cold
[ 0.155390] pci 0000:27:00.0: pme_poll = true
[ 0.155390] pci 0000:27:00.0: after device_set_wakeup_capable()
[ 0.155394] pci 0000:27:00.0: after pci_pme_active()
[ 0.155563] pci 0000:00:08.2: PCI bridge to [bus 27]
[ 0.155570] pci 0000:00:08.2: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.156281] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156345] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156398] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156466] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156537] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156586] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156635] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[ 0.156684] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[ 0.157197] iommu: Default domain type: Translated
[ 0.157354] SCSI subsystem initialized
[ 0.157370] libata version 3.00 loaded.
[ 0.157370] pci 0000:26:00.0: vgaarb: VGA device added: decodes=io+mem,owns=none,locks=none
[ 0.157370] pci 0000:26:00.0: vgaarb: bridge control possible
[ 0.157370] pci 0000:26:00.0: vgaarb: setting as boot device
[ 0.157370] vgaarb: loaded
[ 0.157370] ACPI: bus type USB registered
[ 0.157370] usbcore: registered new interface driver usbfs
[ 0.157370] usbcore: registered new interface driver hub
[ 0.157370] usbcore: registered new device driver usb
[ 0.157370] Registered efivars operations
[ 0.157370] PCI: Using ACPI for IRQ routing
[ 0.160555] PCI: pci_cache_line_size set to 64 bytes
[ 0.160635] e820: reserve RAM buffer [mem 0x09d80000-0x0bffffff]
[ 0.160636] e820: reserve RAM buffer [mem 0x0a200000-0x0bffffff]
[ 0.160636] e820: reserve RAM buffer [mem 0x0b000000-0x0bffffff]
[ 0.160637] e820: reserve RAM buffer [mem 0xe8c67000-0xebffffff]
[ 0.160638] e820: reserve RAM buffer [mem 0xeba9f000-0xebffffff]
[ 0.160638] e820: reserve RAM buffer [mem 0xec014000-0xefffffff]
[ 0.160639] e820: reserve RAM buffer [mem 0xef000000-0xefffffff]
[ 0.160640] e820: reserve RAM buffer [mem 0x38f000000-0x38fffffff]
[ 0.160802] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.160804] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 0.163093] clocksource: Switched to clocksource tsc-early
[ 0.175324] *** VALIDATE bpf ***
[ 0.175473] VFS: Disk quotas dquot_6.6.0
[ 0.175519] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.175550] *** VALIDATE ramfs ***
[ 0.175581] *** VALIDATE hugetlbfs ***
[ 0.175640] pnp: PnP ACPI init
[ 0.175787] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.175791] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.175851] system 00:01: [mem 0x38f000000-0x40effffff window] has been reserved
[ 0.175853] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176029] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.176223] system 00:03: [io 0x0a00-0x0a0f] has been reserved
[ 0.176224] system 00:03: [io 0x0a10-0x0a1f] has been reserved
[ 0.176225] system 00:03: [io 0x0a20-0x0a2f] has been reserved
[ 0.176226] system 00:03: [io 0x0a40-0x0a4f] has been reserved
[ 0.176229] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.176633] pnp 00:04: [dma 0 disabled]
[ 0.176662] pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.176885] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 0.176886] system 00:05: [io 0x040b] has been reserved
[ 0.176887] system 00:05: [io 0x04d6] has been reserved
[ 0.176888] system 00:05: [io 0x0c00-0x0c01] has been reserved
[ 0.176888] system 00:05: [io 0x0c14] has been reserved
[ 0.176889] system 00:05: [io 0x0c50-0x0c51] has been reserved
[ 0.176890] system 00:05: [io 0x0c52] has been reserved
[ 0.176891] system 00:05: [io 0x0c6c] has been reserved
[ 0.176891] system 00:05: [io 0x0c6f] has been reserved
[ 0.176892] system 00:05: [io 0x0cd0-0x0cd1] has been reserved
[ 0.176893] system 00:05: [io 0x0cd2-0x0cd3] has been reserved
[ 0.176894] system 00:05: [io 0x0cd4-0x0cd5] has been reserved
[ 0.176894] system 00:05: [io 0x0cd6-0x0cd7] has been reserved
[ 0.176895] system 00:05: [io 0x0cd8-0x0cdf] has been reserved
[ 0.176896] system 00:05: [io 0x0800-0x089f] has been reserved
[ 0.176897] system 00:05: [io 0x0b00-0x0b0f] has been reserved
[ 0.176897] system 00:05: [io 0x0b20-0x0b3f] has been reserved
[ 0.176898] system 00:05: [io 0x0900-0x090f] has been reserved
[ 0.176899] system 00:05: [io 0x0910-0x091f] has been reserved
[ 0.176900] system 00:05: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.176901] system 00:05: [mem 0xfec01000-0xfec01fff] could not be reserved
[ 0.176902] system 00:05: [mem 0xfedc0000-0xfedc0fff] has been reserved
[ 0.176903] system 00:05: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.176904] system 00:05: [mem 0xfed80000-0xfed8ffff] could not be reserved
[ 0.176904] system 00:05: [mem 0xfec10000-0xfec10fff] has been reserved
[ 0.176905] system 00:05: [mem 0xff000000-0xffffffff] has been reserved
[ 0.176908] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.177402] pnp: PnP ACPI: found 6 devices
[ 0.183724] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.183751] pci 0000:20:00.0: PCI bridge to [bus 21]
[ 0.183764] pci 0000:20:01.0: PCI bridge to [bus 22]
[ 0.183767] pci 0000:20:01.0: bridge window [io 0xf000-0xffff]
[ 0.183772] pci 0000:20:01.0: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.183780] pci 0000:20:04.0: PCI bridge to [bus 25]
[ 0.183792] pci 0000:12:00.2: PCI bridge to [bus 20-25]
[ 0.183794] pci 0000:12:00.2: bridge window [io 0xf000-0xffff]
[ 0.183798] pci 0000:12:00.2: bridge window [mem 0xfcd00000-0xfcdfffff]
[ 0.183806] pci 0000:00:01.2: PCI bridge to [bus 12-25]
[ 0.183808] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
[ 0.183812] pci 0000:00:01.2: bridge window [mem 0xfcd00000-0xfcefffff]
[ 0.183821] pci 0000:00:08.1: PCI bridge to [bus 26]
[ 0.183827] pci 0000:00:08.1: bridge window [io 0xe000-0xefff]
[ 0.183832] pci 0000:00:08.1: bridge window [mem 0xfc900000-0xfccfffff]
[ 0.183835] pci 0000:00:08.1: bridge window [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[ 0.183841] pci 0000:00:08.2: PCI bridge to [bus 27]
[ 0.183845] pci 0000:00:08.2: bridge window [mem 0xfcf00000-0xfcffffff]
[ 0.183854] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 0.183855] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 0.183856] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 0.183857] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.183858] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.183859] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.183860] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfcffffff window]
[ 0.183860] pci_bus 0000:00: resource 11 [mem 0x40f000000-0x7fffffffff window]
[ 0.183861] pci_bus 0000:12: resource 0 [io 0xf000-0xffff]
[ 0.183862] pci_bus 0000:12: resource 1 [mem 0xfcd00000-0xfcefffff]
[ 0.183863] pci_bus 0000:20: resource 0 [io 0xf000-0xffff]
[ 0.183863] pci_bus 0000:20: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.183864] pci_bus 0000:22: resource 0 [io 0xf000-0xffff]
[ 0.183865] pci_bus 0000:22: resource 1 [mem 0xfcd00000-0xfcdfffff]
[ 0.183866] pci_bus 0000:26: resource 0 [io 0xe000-0xefff]
[ 0.183866] pci_bus 0000:26: resource 1 [mem 0xfc900000-0xfccfffff]
[ 0.183867] pci_bus 0000:26: resource 2 [mem 0x7fe0000000-0x7ff01fffff 64bit pref]
[ 0.183868] pci_bus 0000:27: resource 1 [mem 0xfcf00000-0xfcffffff]
[ 0.184094] NET: Registered protocol family 2
[ 0.184316] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.184334] TCP established hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.184463] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
[ 0.184577] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.184625] UDP hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.184655] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes, linear)
[ 0.184869] NET: Registered protocol family 1
[ 0.185074] pci 0000:26:00.1: D0 power state depends on 0000:26:00.0
[ 0.185082] pci 0000:26:00.3: extending delay after power-on from D3hot to 20 msec
[ 0.185279] pci 0000:26:00.4: extending delay after power-on from D3hot to 20 msec
[ 0.185388] PCI: CLS 64 bytes, default 64
[ 0.185424] Trying to unpack rootfs image as initramfs...
[ 0.222999] Freeing initrd memory: 21324K
[ 0.223072] pci 0000:00:00.2: AMD-Vi: Unable to read/write to IOMMU perf counter.
[ 0.223168] pci 0000:00:00.2: can't derive routing for PCI INT A
[ 0.223169] pci 0000:00:00.2: PCI INT A: not connected
[ 0.223226] pci 0000:00:01.0: Adding to iommu group 0
[ 0.223632] pci 0000:00:01.2: Adding to iommu group 1
[ 0.224079] pci 0000:00:08.0: Adding to iommu group 2
[ 0.224453] pci 0000:00:08.1: Adding to iommu group 3
[ 0.224819] pci 0000:00:08.2: Adding to iommu group 4
[ 0.225219] pci 0000:00:14.0: Adding to iommu group 5
[ 0.225589] pci 0000:00:14.3: Adding to iommu group 5
[ 0.225642] pci 0000:00:18.0: Adding to iommu group 6
[ 0.226027] pci 0000:00:18.1: Adding to iommu group 6
[ 0.226049] pci 0000:00:18.2: Adding to iommu group 6
[ 0.226072] pci 0000:00:18.3: Adding to iommu group 6
[ 0.226094] pci 0000:00:18.4: Adding to iommu group 6
[ 0.226117] pci 0000:00:18.5: Adding to iommu group 6
[ 0.226147] pci 0000:00:18.6: Adding to iommu group 6
[ 0.226170] pci 0000:00:18.7: Adding to iommu group 6
[ 0.226227] pci 0000:12:00.0: Adding to iommu group 7
[ 0.226609] pci 0000:12:00.1: Adding to iommu group 7
[ 0.226653] pci 0000:12:00.2: Adding to iommu group 7
[ 0.226676] pci 0000:20:00.0: Adding to iommu group 7
[ 0.226699] pci 0000:20:01.0: Adding to iommu group 7
[ 0.226729] pci 0000:20:04.0: Adding to iommu group 7
[ 0.226761] pci 0000:22:00.0: Adding to iommu group 7
[ 0.226875] pci 0000:26:00.0: Adding to iommu group 8
[ 0.226974] pci 0000:26:00.0: Using iommu direct mapping
[ 0.227032] pci 0000:26:00.1: Adding to iommu group 9
[ 0.227432] pci 0000:26:00.2: Adding to iommu group 9
[ 0.227474] pci 0000:26:00.3: Adding to iommu group 9
[ 0.227524] pci 0000:26:00.4: Adding to iommu group 9
[ 0.227567] pci 0000:26:00.6: Adding to iommu group 9
[ 0.227598] pci 0000:27:00.0: Adding to iommu group 10
[ 0.228208] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[ 0.228209] pci 0000:00:00.2: AMD-Vi: Extended features (0x4f77ef22294ada):
[ 0.228210] PPR NX GT IA GA PC GA_vAPIC
[ 0.228212] AMD-Vi: Interrupt remapping enabled
[ 0.228212] AMD-Vi: Virtual APIC enabled
[ 0.228401] AMD-Vi: Lazy IO/TLB flushing enabled
[ 0.229674] amd_uncore: AMD NB counters detected
[ 0.229685] amd_uncore: AMD LLC counters detected
[ 0.231080] Initialise system trusted keyrings
[ 0.231228] workingset: timestamp_bits=37 max_order=22 bucket_order=0
[ 0.232840] zbud: loaded
[ 0.233645] NET: Registered protocol family 38
[ 0.233647] Key type asymmetric registered
[ 0.233648] Asymmetric key parser 'x509' registered
[ 0.233651] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.233729] io scheduler mq-deadline registered
[ 0.233730] io scheduler kyber registered
[ 0.234030] pcieport 0000:00:01.2: AER: enabled with IRQ 26
[ 0.234449] pcieport 0000:00:08.2: AER: enabled with IRQ 28
[ 0.235246] efifb: probing for efifb
[ 0.235270] efifb: framebuffer at 0x7fe0000000, using 3072k, total 3072k
[ 0.235271] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 0.235271] efifb: scrolling: redraw
[ 0.235272] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.235388] Console: switching to colour frame buffer device 128x48
[ 0.236688] fb0: EFI VGA frame buffer device
[ 0.236808] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.236832] ACPI: Power Button [PWRB]
[ 0.236865] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 0.236889] ACPI: Power Button [PWRF]
[ 0.236927] Monitor-Mwait will be used to enter C-1 state
[ 0.236929] ACPI: \_PR_.C000: Found 2 idle states
[ 0.237026] ACPI: \_PR_.C001: Found 2 idle states
[ 0.237134] ACPI: \_PR_.C002: Found 2 idle states
[ 0.237366] ACPI: \_PR_.C003: Found 2 idle states
[ 0.237617] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.237693] 00:04: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.238817] Non-volatile memory driver v1.3
[ 0.238836] Linux agpgart interface v0.103
[ 0.239155] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel at suse.de>
[ 0.239554] ahci 0000:12:00.1: version 3.0
[ 0.239668] ahci 0000:12:00.1: SSS flag set, parallel bus scan disabled
[ 0.239716] ahci 0000:12:00.1: AHCI 0001.0301 32 slots 8 ports 6 Gbps 0x33 impl SATA mode
[ 0.239718] ahci 0000:12:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
[ 0.240449] scsi host0: ahci
[ 0.240677] scsi host1: ahci
[ 0.240850] scsi host2: ahci
[ 0.240984] scsi host3: ahci
[ 0.241117] scsi host4: ahci
[ 0.241239] scsi host5: ahci
[ 0.241364] scsi host6: ahci
[ 0.241489] scsi host7: ahci
[ 0.241540] ata1: SATA max UDMA/133 abar m131072 at 0xfce80000 port 0xfce80100 irq 36
[ 0.241542] ata2: SATA max UDMA/133 abar m131072 at 0xfce80000 port 0xfce80180 irq 36
[ 0.241543] ata3: DUMMY
[ 0.241543] ata4: DUMMY
[ 0.241545] ata5: SATA max UDMA/133 abar m131072 at 0xfce80000 port 0xfce80300 irq 36
[ 0.241546] ata6: SATA max UDMA/133 abar m131072 at 0xfce80000 port 0xfce80380 irq 36
[ 0.241547] ata7: DUMMY
[ 0.241547] ata8: DUMMY
[ 0.241610] ata1: SATA link down (SStatus 0 SControl 0)
[ 0.241682] ata2: SATA link down (SStatus 0 SControl 0)
[ 0.241746] ata5: SATA link down (SStatus 0 SControl 0)
[ 0.241783] ata6: SATA link down (SStatus 0 SControl 0)
[ 0.251963] ahci 0000:27:00.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[ 0.251965] ahci 0000:27:00.0: flags: 64bit ncq sntf ilck pm led clo only pmp fbs pio slum part
[ 0.252216] scsi host8: ahci
[ 0.252274] ata9: SATA max UDMA/133 abar m2048 at 0xfcf00000 port 0xfcf00100 irq 38
[ 0.252311] [drm] radeon kernel modesetting enabled.
[ 0.252462] libphy: Fixed MDIO Bus: probed
[ 0.252533] usbcore: registered new interface driver cdc_acm
[ 0.252533] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 0.252549] i8042: PNP: No PS/2 controller found.
[ 0.252604] mousedev: PS/2 mouse device common for all mice
[ 0.252667] rtc_cmos 00:02: RTC can wake from S4
[ 0.252948] rtc_cmos 00:02: registered as rtc0
[ 0.252968] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.253027] device-mapper: uevent: version 1.0.3
[ 0.253110] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel at redhat.com
[ 0.253372] hid: raw HID events driver (C) Jiri Kosina
[ 0.253397] usbcore: registered new interface driver usbhid
[ 0.253398] usbhid: USB HID core driver
[ 0.253599] Initializing XFRM netlink socket
[ 0.253901] NET: Registered protocol family 10
[ 0.254284] Segment Routing with IPv6
[ 0.254298] mip6: Mobile IPv6
[ 0.254299] NET: Registered protocol family 17
[ 0.254528] microcode: CPU0: patch_level=0x08101016
[ 0.254531] microcode: CPU1: patch_level=0x08101016
[ 0.254535] microcode: CPU2: patch_level=0x08101016
[ 0.254547] microcode: CPU3: patch_level=0x08101016
[ 0.254616] microcode: Microcode Update Driver: v2.2.
[ 0.254618] IPI shorthand broadcast: enabled
[ 0.254623] AVX2 version of gcm_enc/dec engaged.
[ 0.254623] AES CTR mode by8 optimization enabled
[ 0.258211] ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 0)
[ 0.258345] ata9.00: supports DRM functions and may not be fully accessible
[ 0.258402] ata9.00: ATA-10: CT1000MX500SSD4, M3CR020, max UDMA/133
[ 0.258404] ata9.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 0.259192] ata9.00: supports DRM functions and may not be fully accessible
[ 0.259793] ata9.00: configured for UDMA/133
[ 0.259924] scsi 8:0:0:0: Direct-Access ATA CT1000MX500SSD4 020 PQ: 0 ANSI: 5
[ 0.260138] sd 8:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 0.260140] sd 8:0:0:0: [sda] 4096-byte physical blocks
[ 0.260148] sd 8:0:0:0: [sda] Write Protect is off
[ 0.260149] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.260162] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.260694] sda: sda1 sda2 sda3
[ 0.261375] sd 8:0:0:0: [sda] Attached SCSI disk
[ 0.270491] sched_clock: Marking stable (280465410, -9995240)->(289182085, -18711915)
[ 0.270695] registered taskstats version 1
[ 0.270699] Loading compiled-in X.509 certificates
[ 0.274532] Loaded X.509 cert 'Build time autogenerated kernel key: 91b5e042fe2c53b9e28e9b8228b2a1504b5ab494'
[ 0.274556] zswap: loaded using pool lzo/zbud
[ 0.278040] Key type encrypted registered
[ 0.279119] PM: Magic number: 8:593:587
[ 0.279275] rtc_cmos 00:02: setting system clock to 2020-02-28T14:35:44 UTC (1582900544)
[ 0.279433] After kernel_init_freeable
[ 0.280832] Freeing unused kernel image (initmem) memory: 1628K
[ 0.282965] Write protecting the kernel read-only data: 20480k
[ 0.283449] Freeing unused kernel image (text/rodata gap) memory: 2040K
[ 0.283791] Freeing unused kernel image (rodata/data gap) memory: 1736K
[ 0.305463] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 0.305471] rodata_test: all tests were successful
[ 0.305472] After mark_readonly
[ 0.305472] After pti_finalize
[ 0.305476] rcu_end_inkernel_boot
[ 0.305476] Run /init as init process
[ 0.305478] with arguments:
[ 0.305478] /init
[ 0.305479] noisapnp
[ 0.305479] with environment:
[ 0.305480] HOME=/
[ 0.305480] TERM=linux
[ 0.305481] BOOT_IMAGE=/vmlinuz-5.6.0-rc3-00225-g66e2d30ba7b5
[ 0.305481] apparmor=0
[ 0.385128] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 0.385190] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 1
[ 0.440688] xhci_hcd 0000:12:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000048000410
[ 0.440913] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 0.440914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.440915] usb usb1: Product: xHCI Host Controller
[ 0.440916] usb usb1: Manufacturer: Linux 5.6.0-rc3-00225-g66e2d30ba7b5 xhci-hcd
[ 0.440916] usb usb1: SerialNumber: 0000:12:00.0
[ 0.441022] hub 1-0:1.0: USB hub found
[ 0.441038] hub 1-0:1.0: 10 ports detected
[ 0.441778] xhci_hcd 0000:12:00.0: xHCI Host Controller
[ 0.441803] xhci_hcd 0000:12:00.0: new USB bus registered, assigned bus number 2
[ 0.441805] xhci_hcd 0000:12:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.441863] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.441924] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 0.441924] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.441925] usb usb2: Product: xHCI Host Controller
[ 0.441926] usb usb2: Manufacturer: Linux 5.6.0-rc3-00225-g66e2d30ba7b5 xhci-hcd
[ 0.441926] usb usb2: SerialNumber: 0000:12:00.0
[ 0.442039] hub 2-0:1.0: USB hub found
[ 0.442060] hub 2-0:1.0: 4 ports detected
[ 0.442434] xhci_hcd 0000:26:00.3: xHCI Host Controller
[ 0.442474] xhci_hcd 0000:26:00.3: new USB bus registered, assigned bus number 3
[ 0.442828] xhci_hcd 0000:26:00.3: hcc params 0x0270ffe5 hci version 0x110 quirks 0x0000000840000410
[ 0.443760] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 0.443761] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.443762] usb usb3: Product: xHCI Host Controller
[ 0.443763] usb usb3: Manufacturer: Linux 5.6.0-rc3-00225-g66e2d30ba7b5 xhci-hcd
[ 0.443763] usb usb3: SerialNumber: 0000:26:00.3
[ 0.443848] hub 3-0:1.0: USB hub found
[ 0.443861] hub 3-0:1.0: 4 ports detected
[ 0.444328] xhci_hcd 0000:26:00.3: xHCI Host Controller
[ 0.444359] xhci_hcd 0000:26:00.3: new USB bus registered, assigned bus number 4
[ 0.444361] xhci_hcd 0000:26:00.3: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.444395] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.444408] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 0.444409] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.444409] usb usb4: Product: xHCI Host Controller
[ 0.444410] usb usb4: Manufacturer: Linux 5.6.0-rc3-00225-g66e2d30ba7b5 xhci-hcd
[ 0.444410] usb usb4: SerialNumber: 0000:26:00.3
[ 0.444492] hub 4-0:1.0: USB hub found
[ 0.444519] hub 4-0:1.0: 4 ports detected
[ 0.445034] xhci_hcd 0000:26:00.4: xHCI Host Controller
[ 0.445072] xhci_hcd 0000:26:00.4: new USB bus registered, assigned bus number 5
[ 0.445462] xhci_hcd 0000:26:00.4: hcc params 0x0260ffe5 hci version 0x110 quirks 0x0000000840000410
[ 0.446039] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
[ 0.446040] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.446041] usb usb5: Product: xHCI Host Controller
[ 0.446041] usb usb5: Manufacturer: Linux 5.6.0-rc3-00225-g66e2d30ba7b5 xhci-hcd
[ 0.446042] usb usb5: SerialNumber: 0000:26:00.4
[ 0.446121] hub 5-0:1.0: USB hub found
[ 0.446130] hub 5-0:1.0: 1 port detected
[ 0.446289] xhci_hcd 0000:26:00.4: xHCI Host Controller
[ 0.446330] xhci_hcd 0000:26:00.4: new USB bus registered, assigned bus number 6
[ 0.446331] xhci_hcd 0000:26:00.4: Host supports USB 3.1 Enhanced SuperSpeed
[ 0.446382] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 0.446409] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.06
[ 0.446410] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.446411] usb usb6: Product: xHCI Host Controller
[ 0.446411] usb usb6: Manufacturer: Linux 5.6.0-rc3-00225-g66e2d30ba7b5 xhci-hcd
[ 0.446412] usb usb6: SerialNumber: 0000:26:00.4
[ 0.446515] hub 6-0:1.0: USB hub found
[ 0.446534] hub 6-0:1.0: 1 port detected
[ 0.452403] [drm] amdgpu kernel modesetting enabled.
[ 0.452425] checking generic (7fe0000000 300000) vs hw (7fe0000000 10000000)
[ 0.452426] fb0: switching to amdgpudrmfb from EFI VGA
[ 0.452492] Console: switching to colour dummy device 80x25
[ 0.452517] amdgpu 0000:26:00.0: vgaarb: deactivate vga console
[ 0.452566] amdgpu 0000:26:00.0: enabling device (0006 -> 0007)
[ 0.452760] [drm] initializing kernel modesetting (RAVEN 0x1002:0x15DD 0x1002:0x15DD 0xC8).
[ 0.452770] [drm] register mmio base: 0xFCC00000
[ 0.452771] [drm] register mmio size: 524288
[ 0.452839] [drm] add ip block number 0 <soc15_common>
[ 0.452840] [drm] add ip block number 1 <gmc_v9_0>
[ 0.452840] [drm] add ip block number 2 <vega10_ih>
[ 0.452841] [drm] add ip block number 3 <psp>
[ 0.452841] [drm] add ip block number 4 <gfx_v9_0>
[ 0.452842] [drm] add ip block number 5 <sdma_v4_0>
[ 0.452843] [drm] add ip block number 6 <powerplay>
[ 0.452843] [drm] add ip block number 7 <dm>
[ 0.452844] [drm] add ip block number 8 <vcn_v1_0>
[ 0.452884] ATOM BIOS: 113-RAVEN-114
[ 0.452902] [drm] VCN decode is enabled in VM mode
[ 0.452903] [drm] VCN encode is enabled in VM mode
[ 0.452903] [drm] JPEG decode is enabled in VM mode
[ 0.452925] [drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
[ 0.452931] amdgpu 0000:26:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
[ 0.452931] amdgpu 0000:26:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[ 0.452933] amdgpu 0000:26:00.0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[ 0.452935] [drm] Detected VRAM RAM=2048M, BAR=2048M
[ 0.452936] [drm] RAM width 128bits DDR4
[ 0.453002] [TTM] Zone kernel: Available graphics memory: 7168232 KiB
[ 0.453003] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
[ 0.453003] [TTM] Initializing pool allocator
[ 0.453006] [TTM] Initializing DMA pool allocator
[ 0.453064] [drm] amdgpu: 2048M of VRAM memory ready
[ 0.453065] [drm] amdgpu: 3072M of GTT memory ready.
[ 0.453073] [drm] GART: num cpu pages 262144, num gpu pages 262144
[ 0.453646] [drm] PCIE GART of 1024M enabled (table at 0x000000F400900000).
[ 0.456834] [drm] use_doorbell being set to: [true]
[ 0.457032] amdgpu: [powerplay] hwmgr_sw_init smu backed is smu10_smu
[ 0.457104] [drm] Found VCN firmware Version ENC: 1.9 DEC: 1 VEP: 0 Revision: 28
[ 0.457106] [drm] PSP loading VCN firmware
[ 0.478317] [drm] reserve 0x400000 from 0xf47f800000 for PSP TMR
[ 0.565211] amdgpu 0000:26:00.0: RAS: ras ta ucode is not available
[ 0.572611] [drm] kiq ring mec 2 pipe 1 q 0
[ 0.573710] [drm] DM_PPLIB: values for F clock
[ 0.573711] [drm] DM_PPLIB: 400000 in kHz, 3649 in mV
[ 0.573711] [drm] DM_PPLIB: 933000 in kHz, 4074 in mV
[ 0.573712] [drm] DM_PPLIB: 1067000 in kHz, 4250 in mV
[ 0.573713] [drm] DM_PPLIB: values for DCF clock
[ 0.573713] [drm] DM_PPLIB: 300000 in kHz, 3649 in mV
[ 0.573714] [drm] DM_PPLIB: 600000 in kHz, 4074 in mV
[ 0.573714] [drm] DM_PPLIB: 626000 in kHz, 4250 in mV
[ 0.573714] [drm] DM_PPLIB: 654000 in kHz, 4399 in mV
[ 0.573950] [drm] Display Core initialized with v3.2.69!
[ 0.630114] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.630114] [drm] Driver supports precise vblank timestamp query.
[ 0.643357] [drm] VCN decode and encode initialized successfully(under SPG Mode).
[ 0.644968] [drm] fb mappable at 0x38FBC1000
[ 0.644969] [drm] vram apper at 0x38F000000
[ 0.644969] [drm] size 5242880
[ 0.644969] [drm] fb depth is 24
[ 0.644970] [drm] pitch is 5120
[ 0.645008] fbcon: amdgpudrmfb (fb0) is primary device
[ 0.668383] Console: switching to colour frame buffer device 160x64
[ 0.686752] amdgpu 0000:26:00.0: fb0: amdgpudrmfb frame buffer device
[ 0.690293] amdgpu 0000:26:00.0: ring gfx uses VM inv eng 0 on hub 0
[ 0.690294] amdgpu 0000:26:00.0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
[ 0.690295] amdgpu 0000:26:00.0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
[ 0.690296] amdgpu 0000:26:00.0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
[ 0.690297] amdgpu 0000:26:00.0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
[ 0.690298] amdgpu 0000:26:00.0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
[ 0.690299] amdgpu 0000:26:00.0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
[ 0.690300] amdgpu 0000:26:00.0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
[ 0.690301] amdgpu 0000:26:00.0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
[ 0.690302] amdgpu 0000:26:00.0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
[ 0.690303] amdgpu 0000:26:00.0: ring sdma0 uses VM inv eng 0 on hub 1
[ 0.690304] amdgpu 0000:26:00.0: ring vcn_dec uses VM inv eng 1 on hub 1
[ 0.690305] amdgpu 0000:26:00.0: ring vcn_enc0 uses VM inv eng 4 on hub 1
[ 0.690306] amdgpu 0000:26:00.0: ring vcn_enc1 uses VM inv eng 5 on hub 1
[ 0.690307] amdgpu 0000:26:00.0: ring jpeg_dec uses VM inv eng 6 on hub 1
[ 0.703012] [drm] Initialized amdgpu 3.36.0 20150101 for 0000:26:00.0 on minor 0
[ 0.760680] usb 1-7: new low-speed USB device number 2 using xhci_hcd
[ 0.768678] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ 0.792721] usb 5-1: New USB device found, idVendor=1c6b, idProduct=a223, bcdDevice= 0.00
[ 0.792723] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 0.792724] usb 5-1: Product: Mass Storage Device
[ 0.792725] usb 5-1: Manufacturer: USB2.0 External
[ 0.792726] usb 5-1: SerialNumber: 86 406817504398
[ 0.996224] usb 1-7: New USB device found, idVendor=093a, idProduct=2521, bcdDevice= 1.00
[ 0.996226] usb 1-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 0.996227] usb 1-7: Product: USB OPTICAL MOUSE
[ 1.022358] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-7/1-7:1.0/0003:093A:2521.0001/input/input2
[ 1.022987] hid-generic 0003:093A:2521.0001: input,hidraw0: USB HID v1.11 Mouse [USB OPTICAL MOUSE] on usb-0000:12:00.0-7/input0
[ 1.137074] usb 1-10: new low-speed USB device number 3 using xhci_hcd
[ 1.237058] tsc: Refined TSC clocksource calibration: 3499.997 MHz
[ 1.237067] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734e5ebc4, max_idle_ns: 440795265422 ns
[ 1.237344] clocksource: Switched to clocksource tsc
[ 1.380310] usb 1-10: New USB device found, idVendor=045e, idProduct=07b9, bcdDevice= 1.14
[ 1.380314] usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.380316] usb 1-10: Product: USB Keyboard
[ 1.380318] usb 1-10: Manufacturer: LITEON Technology
[ 1.410412] input: LITEON Technology USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:12:00.0/usb1/1-10/1-10:1.0/0003:045E:07B9.0002/input/input3
[ 1.463279] hid-generic 0003:045E:07B9.0002: input,hidraw1: USB HID v1.10 Keyboard [LITEON Technology USB Keyboard] on usb-0000:12:00.0-10/input0
[ 7.912261] process '/usr/bin/fstype' started with executable stack
[ 7.957139] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
[ 8.096132] systemd[1]: Inserted module 'autofs4'
[ 8.136575] systemd[1]: systemd 244.3-1 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[ 8.148051] systemd[1]: Detected architecture x86-64.
[ 8.154321] systemd[1]: Set hostname to <tokeiihto>.
[ 8.242803] systemd[1]: /lib/systemd/system/dbus.socket:5: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 8.273639] systemd[1]: Created slice system-systemd\x2dcryptsetup.slice.
[ 8.273857] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 8.274048] systemd[1]: Created slice User and Session Slice.
[ 8.274106] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 8.274151] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 8.274277] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 8.274359] systemd[1]: Reached target Remote File Systems.
[ 8.274390] systemd[1]: Reached target Slices.
[ 8.274423] systemd[1]: Reached target Swap.
[ 8.275980] systemd[1]: Listening on Process Core Dump Socket.
[ 8.276093] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 8.276147] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 8.276287] systemd[1]: Listening on Journal Audit Socket.
[ 8.276358] systemd[1]: Listening on Journal Socket (/dev/log).
[ 8.276440] systemd[1]: Listening on Journal Socket.
[ 8.276516] systemd[1]: Listening on udev Control Socket.
[ 8.276604] systemd[1]: Listening on udev Kernel Socket.
[ 8.277334] systemd[1]: Mounting Huge Pages File System...
[ 8.277963] systemd[1]: Mounting POSIX Message Queue File System...
[ 8.278078] systemd[1]: Condition check resulted in FUSE Control File System being skipped.
[ 8.278866] systemd[1]: Mounting Kernel Configuration File System...
[ 8.279546] systemd[1]: Mounting Kernel Debug File System...
[ 8.280288] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 8.281876] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 8.281915] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
[ 8.283169] systemd[1]: Starting Journal Service...
[ 8.284236] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 8.284917] systemd[1]: Starting Apply Kernel Variables...
[ 8.285709] systemd[1]: Starting udev Coldplug all Devices...
[ 8.289279] systemd[1]: Mounted Huge Pages File System.
[ 8.289359] systemd[1]: Mounted POSIX Message Queue File System.
[ 8.289421] systemd[1]: Mounted Kernel Configuration File System.
[ 8.289480] systemd[1]: Mounted Kernel Debug File System.
[ 8.289776] systemd[1]: Started Create list of static device nodes for the current kernel.
[ 8.294409] EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
[ 8.296163] systemd[1]: Started Remount Root and Kernel File Systems.
[ 8.297708] systemd[1]: Condition check resulted in Rebuild Hardware Database being skipped.
[ 8.298357] systemd[1]: Starting Load/Save Random Seed...
[ 8.299095] systemd[1]: Starting Create System Users...
[ 8.307024] systemd[1]: Started Apply Kernel Variables.
[ 8.313304] systemd[1]: Started Create System Users.
[ 8.313986] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 8.315309] systemd[1]: Started Load/Save Random Seed.
[ 8.328040] systemd[1]: Started Create Static Device Nodes in /dev.
[ 8.328167] systemd[1]: Reached target Local File Systems (Pre).
[ 8.328926] systemd[1]: Starting udev Kernel Device Manager...
[ 8.354001] systemd[1]: Started udev Coldplug all Devices.
[ 8.377310] systemd[1]: Started udev Kernel Device Manager.
[ 8.413558] acpi_cpufreq: overriding BIOS provided _PSD data
[ 8.440248] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no)
[ 8.441066] acpi device:10: registered as cooling_device4
[ 8.441115] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0f/LNXVIDEO:01/input/input4
[ 8.454180] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:01)
[ 8.489604] ccp 0000:26:00.2: enabling device (0000 -> 0002)
[ 8.489872] r8169 0000:22:00.0: enabling device (0000 -> 0003)
[ 8.490546] ccp 0000:26:00.2: WARN: Device release is not defined so it is not safe to unbind this driver while in use
[ 8.490605] ccp 0000:26:00.2: ccp enabled
[ 8.490616] ccp 0000:26:00.2: psp: unable to access the device: you might be running a broken BIOS.
[ 8.494292] libphy: r8169: probed
[ 8.494457] r8169 0000:22:00.0 eth0: RTL8168h/8111h, 30:9c:23:04:d6:98, XID 541, IRQ 55
[ 8.494458] r8169 0000:22:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 8.522908] sd 8:0:0:0: Attached scsi generic sg0 type 0
[ 8.524056] 1
[ 8.524063] 2
[ 8.524067] snd_hda_intel 0000:26:00.1: enabling device (0000 -> 0002)
[ 8.524183] 3
[ 8.524183] 4
[ 8.524184] 5
[ 8.524184] 6
[ 8.524184] 7
[ 8.524186] 8
[ 8.524186] 9
[ 8.524606] 1
[ 8.524612] 2
[ 8.524626] snd_hda_intel 0000:26:00.6: enabling device (0000 -> 0002)
[ 8.524680] 3
[ 8.524681] 4
[ 8.524681] 5
[ 8.524681] 6
[ 8.524681] 7
[ 8.524683] 8
[ 8.524683] 9
[ 8.526491] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 8.526493] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[ 8.531406] usb-storage 5-1:1.0: USB Mass Storage device detected
[ 8.532060] scsi host9: usb-storage 5-1:1.0
[ 8.532208] usbcore: registered new interface driver usb-storage
[ 8.535406] snd_hda_intel 0000:26:00.1: bound 0000:26:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
[ 8.535990] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:08.1/0000:26:00.1/sound/card0/input5
[ 8.536054] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:08.1/0000:26:00.1/sound/card0/input6
[ 8.536118] input: HD-Audio Generic HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:08.1/0000:26:00.1/sound/card0/input7
[ 8.551460] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC892: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[ 8.551461] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.551462] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[ 8.551463] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 8.551464] snd_hda_codec_realtek hdaudioC1D0: dig-out=0x1e/0x0
[ 8.551464] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 8.551465] snd_hda_codec_realtek hdaudioC1D0: Front Mic=0x19
[ 8.551466] snd_hda_codec_realtek hdaudioC1D0: Rear Mic=0x18
[ 8.551467] snd_hda_codec_realtek hdaudioC1D0: Line=0x1a
[ 8.554381] systemd[1]: Found device CT1000MX500SSD4 3.
[ 8.555204] systemd[1]: Starting Cryptography Setup for sda3_crypt...
[ 8.559559] systemd[1]: Found device CT1000MX500SSD4 EFI_System.
[ 8.560370] systemd[1]: Starting File System Check on /dev/disk/by-uuid/0C1D-2401...
[ 8.563219] systemd[1]: Started Cryptography Setup for sda3_crypt.
[ 8.563381] systemd[1]: Reached target Local Encrypted Volumes.
[ 8.569712] systemd[1]: Started File System Check Daemon to report status.
[ 8.572647] systemd[1]: Found device CT1000MX500SSD4 tokeiihto-boot.
[ 8.573582] systemd[1]: Starting File System Check on /dev/disk/by-uuid/801afa2b-2304-4e1a-9621-43d853e3208f...
[ 8.584439] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input8
[ 8.584519] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input9
[ 8.584633] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input10
[ 8.584688] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input11
[ 8.584727] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input12
[ 8.584760] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input13
[ 8.584804] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:26:00.6/sound/card1/input14
[ 8.597837] systemd[1]: Started Journal Service.
[ 8.611486] systemd-journald[308]: Received client request to flush runtime journal.
[ 8.632098] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: errors=remount-ro
[ 8.632106] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
[ 8.679127] r8169 0000:22:00.0 enp34s0: renamed from eth0
[ 9.381914] Generic FE-GE Realtek PHY r8169-2200:00: attached PHY driver [Generic FE-GE Realtek PHY] (mii_bus:phy_addr=r8169-2200:00, irq=IGNORE)
[ 9.475187] r8169 0000:22:00.0 enp34s0: Link is Down
[ 9.561775] scsi 9:0:0:0: CD-ROM ASUS SDRW-08U9M-U B101 PQ: 0 ANSI: 0
[ 9.562152] scsi 9:0:0:0: Attached scsi generic sg1 type 5
[ 9.575985] sr 9:0:0:0: Power-on or device reset occurred
[ 9.587053] sr 9:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 9.587056] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 9.597707] sr 9:0:0:0: Attached scsi CD-ROM sr0
[ 13.093409] r8169 0000:22:00.0 enp34s0: Link is Up - 1Gbps/Full - flow control rx/tx
[ 13.093419] IPv6: ADDRCONF(NETDEV_CHANGE): enp34s0: link becomes ready
[ 16.981052] fuse: init (API version 7.31)
[ 16.981113] *** VALIDATE fuseblk ***
[ 16.981116] *** VALIDATE fuse ***
More information about the fwts-devel
mailing list