[PATCH 2/2] fwts-test: Add MCHI table regression tests
Colin King
colin.king at canonical.com
Tue Jul 28 13:01:47 UTC 2015
From: Colin Ian King <colin.king at canonical.com>
Signed-off-by: Colin Ian King <colin.king at canonical.com>
---
Makefile.am | 2 +
.../arg-show-tests-0001/arg-show-tests-0001.log | 2 +
.../arg-show-tests-full-0001.log | 4 ++
fwts-test/mchi-0001/acpidump-0001.log | 32 ++++++++++
fwts-test/mchi-0001/acpidump-0002.log | 32 ++++++++++
fwts-test/mchi-0001/mchi-0001.log | 31 ++++++++++
fwts-test/mchi-0001/mchi-0002.log | 70 ++++++++++++++++++++++
fwts-test/mchi-0001/test-0001.sh | 17 ++++++
fwts-test/mchi-0001/test-0002.sh | 17 ++++++
9 files changed, 207 insertions(+)
create mode 100644 fwts-test/mchi-0001/acpidump-0001.log
create mode 100644 fwts-test/mchi-0001/acpidump-0002.log
create mode 100644 fwts-test/mchi-0001/mchi-0001.log
create mode 100644 fwts-test/mchi-0001/mchi-0002.log
create mode 100755 fwts-test/mchi-0001/test-0001.sh
create mode 100755 fwts-test/mchi-0001/test-0002.sh
diff --git a/Makefile.am b/Makefile.am
index 0cb63dd..31bedd9 100644
--- a/Makefile.am
+++ b/Makefile.am
@@ -91,6 +91,8 @@ TESTS = fwts-test/acpidump-0001/test-0001.sh \
fwts-test/slit-0001/test-0002.sh \
fwts-test/madt-0001/test-0001.sh \
fwts-test/madt-0001/test-0002.sh \
+ fwts-test/mchi-0001/test-0001.sh \
+ fwts-test/mchi-0001/test-0002.sh \
fwts-test/msdm-0001/test-0001.sh \
fwts-test/msdm-0001/test-0002.sh \
fwts-test/method-0001/test-0001.sh \
diff --git a/fwts-test/arg-show-tests-0001/arg-show-tests-0001.log b/fwts-test/arg-show-tests-0001/arg-show-tests-0001.log
index 1aaf9df..fac372d 100644
--- a/fwts-test/arg-show-tests-0001/arg-show-tests-0001.log
+++ b/fwts-test/arg-show-tests-0001/arg-show-tests-0001.log
@@ -24,6 +24,7 @@ ACPI tests:
lpit LPIT Low Power Idle Table test.
madt MADT Multiple APIC Description Table test.
mcfg MCFG PCI Express* memory mapped config space test.
+ mchi MCHI Management Controller Host Interface Table test.
method ACPI DSDT Method Semantic tests.
msdm MSDM Microsoft Data Management Table test.
pcc Processor Clocking Control (PCC) test.
@@ -84,6 +85,7 @@ Batch tests:
maxfreq Test max CPU frequencies against max scaling frequency.
maxreadreq Test firmware has set PCI Express MaxReadReq to a higher value on non-motherboard devices.
mcfg MCFG PCI Express* memory mapped config space test.
+ mchi MCHI Management Controller Host Interface Table test.
method ACPI DSDT Method Semantic tests.
microcode Test if system is using latest microcode.
mpcheck MultiProcessor Tables tests.
diff --git a/fwts-test/arg-show-tests-full-0001/arg-show-tests-full-0001.log b/fwts-test/arg-show-tests-full-0001/arg-show-tests-full-0001.log
index 3d0906e..f7865a0 100644
--- a/fwts-test/arg-show-tests-full-0001/arg-show-tests-full-0001.log
+++ b/fwts-test/arg-show-tests-full-0001/arg-show-tests-full-0001.log
@@ -57,6 +57,8 @@ ACPI tests:
mcfg (2 tests):
Validate MCFG table.
Validate MCFG PCI config space.
+ mchi (1 test):
+ MCHI Management Controller Host Interface Table test.
method (180 tests):
Test Method Names.
Test _AEI.
@@ -372,6 +374,8 @@ Batch tests:
mcfg (2 tests):
Validate MCFG table.
Validate MCFG PCI config space.
+ mchi (1 test):
+ MCHI Management Controller Host Interface Table test.
method (180 tests):
Test Method Names.
Test _AEI.
diff --git a/fwts-test/mchi-0001/acpidump-0001.log b/fwts-test/mchi-0001/acpidump-0001.log
new file mode 100644
index 0000000..26b9a42
--- /dev/null
+++ b/fwts-test/mchi-0001/acpidump-0001.log
@@ -0,0 +1,32 @@
+FACS @ 0x00000000
+ 0000: 46 41 43 53 40 00 00 00 00 00 00 00 00 00 00 00 FACS at ...........
+ 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+
+FACP @ 0x00000000
+ 0000: 46 41 43 50 f4 00 00 00 03 f9 41 4d 44 20 20 20 FACP......AMD
+ 0010: 47 55 41 4d 20 20 20 20 00 00 04 06 41 4d 44 20 GUAM ....AMD
+ 0020: 40 42 0f 00 c0 2f e9 af 92 47 e8 af 00 02 09 00 @B.../...G......
+ 0030: b0 00 00 00 f0 f1 00 00 00 80 00 00 00 00 00 00 ................
+ 0040: 04 80 00 00 00 00 00 00 00 82 00 00 08 80 00 00 ................
+ 0050: 20 80 00 00 00 00 00 00 04 02 01 04 08 00 00 00 ...............
+ 0060: 65 00 e9 03 00 00 00 00 01 00 0d 00 32 00 00 00 e...........2...
+ 0070: a5 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0080: 00 00 00 00 c0 2f e9 af 00 00 00 00 92 47 e8 af ...../.......G..
+ 0090: 00 00 00 00 01 20 00 00 00 80 00 00 00 00 00 00 ..... ..........
+ 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 01 10 00 00 ................
+ 00b0: 04 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 00c0: 00 00 00 00 01 08 00 00 00 82 00 00 00 00 00 00 ................
+ 00d0: 01 20 00 00 08 80 00 00 00 00 00 00 01 40 00 00 . ........... at ..
+ 00e0: 20 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...............
+ 00f0: 00 00 00 00 ....
+
+MCHI @ 0x00000000
+ 0000: 4d 43 48 49 45 00 00 00 01 ba 49 4e 54 45 4c 20 MCHIE.....INTEL
+ 0010: 54 45 4d 50 4c 41 54 45 15 07 00 02 49 4e 54 4c TEMPLATE....INTL
+ 0020: 19 06 15 20 02 01 87 96 a5 b4 c3 d2 e1 f0 02 00 ... ............
+ 0030: 01 34 02 00 00 01 08 00 00 80 c0 08 00 00 80 ee .4..............
+ 0040: ff 01 02 1f 47 ....G
+
diff --git a/fwts-test/mchi-0001/acpidump-0002.log b/fwts-test/mchi-0001/acpidump-0002.log
new file mode 100644
index 0000000..afe2648
--- /dev/null
+++ b/fwts-test/mchi-0001/acpidump-0002.log
@@ -0,0 +1,32 @@
+FACS @ 0x00000000
+ 0000: 46 41 43 53 40 00 00 00 00 00 00 00 00 00 00 00 FACS at ...........
+ 0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0020: 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+
+FACP @ 0x00000000
+ 0000: 46 41 43 50 f4 00 00 00 03 f9 41 4d 44 20 20 20 FACP......AMD
+ 0010: 47 55 41 4d 20 20 20 20 00 00 04 06 41 4d 44 20 GUAM ....AMD
+ 0020: 40 42 0f 00 c0 2f e9 af 92 47 e8 af 00 02 09 00 @B.../...G......
+ 0030: b0 00 00 00 f0 f1 00 00 00 80 00 00 00 00 00 00 ................
+ 0040: 04 80 00 00 00 00 00 00 00 82 00 00 08 80 00 00 ................
+ 0050: 20 80 00 00 00 00 00 00 04 02 01 04 08 00 00 00 ...............
+ 0060: 65 00 e9 03 00 00 00 00 01 00 0d 00 32 00 00 00 e...........2...
+ 0070: a5 c1 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 0080: 00 00 00 00 c0 2f e9 af 00 00 00 00 92 47 e8 af ...../.......G..
+ 0090: 00 00 00 00 01 20 00 00 00 80 00 00 00 00 00 00 ..... ..........
+ 00a0: 00 00 00 00 00 00 00 00 00 00 00 00 01 10 00 00 ................
+ 00b0: 04 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
+ 00c0: 00 00 00 00 01 08 00 00 00 82 00 00 00 00 00 00 ................
+ 00d0: 01 20 00 00 08 80 00 00 00 00 00 00 01 40 00 00 . ........... at ..
+ 00e0: 20 80 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ...............
+ 00f0: 00 00 00 00 ....
+
+MCHI @ 0x00000000
+ 0000: 4d 43 48 49 45 00 00 00 01 a1 49 4e 54 45 4c 20 MCHIE.....INTEL
+ 0010: 54 45 4d 50 4c 41 54 45 15 07 00 02 49 4e 54 4c TEMPLATE....INTL
+ 0020: 19 06 15 20 01 fe 87 96 a5 b4 c3 d2 e1 f0 80 f0 ... ............
+ 0030: f1 34 02 00 00 04 f0 20 20 80 c0 08 00 00 80 ee .4..... .......
+ 0040: ff ff ff ff ff .....
+
diff --git a/fwts-test/mchi-0001/mchi-0001.log b/fwts-test/mchi-0001/mchi-0001.log
new file mode 100644
index 0000000..3a75218
--- /dev/null
+++ b/fwts-test/mchi-0001/mchi-0001.log
@@ -0,0 +1,31 @@
+mchi mchi: MCHI Management Controller Host Interface Table
+mchi test.
+mchi ----------------------------------------------------------
+mchi Test 1 of 1: MCHI Management Controller Host Interface
+mchi Table test.
+mchi MCHI Table:
+mchi Interface Type: 0x02
+mchi Protocol Identifier 0x01
+mchi Protocol Data: 0x87 0x96 0xa5 0xb4
+mchi 0xc3 0xd2 0xe1 0xf0
+mchi Interrupt Type: 0x02
+mchi GPE: 0x00
+mchi PCI Device Flag: 0x01
+mchi Global System Interrupt: 0x00000234
+mchi Base Address:
+mchi Address Space ID: 0x01
+mchi Register Bit Width 0x08
+mchi Register Bit Offset 0x00
+mchi Access Size 0x00
+mchi Address 0xffee80000008c080
+mchi PCI Segment Group: 0x01
+mchi PCI Bus Number: 0x02
+mchi PCI Device Number: 0x1f
+mchi PCI Function Number: 0x47
+mchi
+mchi PASSED: Test 1, No issues found in MCHI table.
+mchi
+mchi ==========================================================
+mchi 1 passed, 0 failed, 0 warning, 0 aborted, 0 skipped, 0
+mchi info only.
+mchi ==========================================================
diff --git a/fwts-test/mchi-0001/mchi-0002.log b/fwts-test/mchi-0001/mchi-0002.log
new file mode 100644
index 0000000..2b63528
--- /dev/null
+++ b/fwts-test/mchi-0001/mchi-0002.log
@@ -0,0 +1,70 @@
+mchi mchi: MCHI Management Controller Host Interface Table
+mchi test.
+mchi ----------------------------------------------------------
+mchi Test 1 of 1: MCHI Management Controller Host Interface
+mchi Table test.
+mchi MCHI Table:
+mchi Interface Type: 0x01
+mchi Protocol Identifier 0xfe
+mchi Protocol Data: 0x87 0x96 0xa5 0xb4
+mchi 0xc3 0xd2 0xe1 0xf0
+mchi Interrupt Type: 0x80
+mchi GPE: 0xf0
+mchi PCI Device Flag: 0xf1
+mchi Global System Interrupt: 0x00000234
+mchi Base Address:
+mchi Address Space ID: 0x04
+mchi Register Bit Width 0xf0
+mchi Register Bit Offset 0x20
+mchi Access Size 0x20
+mchi Address 0xffee80000008c080
+mchi PCI Segment Group: 0xff
+mchi PCI Bus Number: 0xff
+mchi PCI Device Number: 0xff
+mchi PCI Function Number: 0xff
+mchi
+mchi FAILED [HIGH] MCHIInvalidInterfaceType: Test 1, MCHI
+mchi Interface Type is 0x01 which is reserved, allowed values
+mchi are 0x02..0x08
+mchi FAILED [HIGH] MCHIInvalidProtocolIdentifier: Test 1, MCHI
+mchi Protocol Indentifier 0xfe which is reserved, allowed
+mchi values are 0x00 (Unspecifier), 0x01 (MCTP), 0x02 (IPMI) or
+mchi 255 (OEM defined)
+mchi FAILED [HIGH] MCHIInterruptTypeReservedNonZero: Test 1,
+mchi MCHI Interrupt Type 0x80 has some reserved bits [7:2] set,
+mchi these should be all zero.
+mchi FAILED [HIGH] MCHIGpeNonZero: Test 1, MCHI GPE is 0xf0 and
+mchi should be zero when bit 0 of the Interrupt Type field is 0
+mchi (SCI triggered through GPE non-supported)
+mchi FAILED [HIGH] MCHIPciDeviceFlagReservedNonZero: Test 1,
+mchi MCHI PCI Device Flag 0xf1 has some reserved bits [7:1] set
+mchi , these should be all zero.
+mchi FAILED [HIGH] MCHIGsiNonZero: Test 1, MCHI Global System
+mchi Interrupt is 0x234 and should be zero when bit 1 of the
+mchi Interrupt Type field is 0
+mchi FAILED [HIGH] MCHIPciDeviceFlagInvalid: Test 1, MCHI PCI
+mchi Device Flag is 0xf1 and bit [0] should be 0 for a SMBus
+mchi Address Space ID
+mchi FAILED [MEDIUM] MCHISmbusRegBitWidthNonZero: Test 1, MCHI
+mchi Base Address Register Bit Width is 0xf0 and should be zero
+mchi for a SMBus Address Space ID
+mchi FAILED [MEDIUM] MCHISmbusRegBitOffsetNonZero: Test 1, MCHI
+mchi Base Address Register Bit Offset is 0x20 and should be
+mchi zero for a SMBus Address Space ID
+mchi FAILED [MEDIUM] MCHISmbusRegAddressSizeInvalid: Test 1,
+mchi MCHI Base Address Register Address Size is 0x20 and should
+mchi be 1 (byte access) for a SMBus Address Space ID
+mchi FAILED [MEDIUM] MCHISmbusAddressInvalid: Test 1, MCHI Base
+mchi Address is 0xffee80000008c080 and should be 0x00..0x7f a
+mchi SMBus Address Space ID
+mchi FAILED [MEDIUM] MCHIPciDeviceNumberInvalid: Test 1, MCHI
+mchi PCI Device Number is 0xff and reserved bits [7:5] should
+mchi be zero
+mchi FAILED [MEDIUM] MCHIPciFunctionNumberInvalid: Test 1, MCHI
+mchi PCI Function Number is 0xff and reserved bits [7] and [5
+mchi :3] should be zero
+mchi
+mchi ==========================================================
+mchi 0 passed, 13 failed, 0 warning, 0 aborted, 0 skipped, 0
+mchi info only.
+mchi ==========================================================
diff --git a/fwts-test/mchi-0001/test-0001.sh b/fwts-test/mchi-0001/test-0001.sh
new file mode 100755
index 0000000..20835f6
--- /dev/null
+++ b/fwts-test/mchi-0001/test-0001.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+#
+TEST="Test table against MCHI"
+NAME=test-0001.sh
+TMPLOG=$TMP/mchi.log.$$
+
+$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/mchi-0001/acpidump-0001.log mchi - | cut -c7- | grep "^mchi" > $TMPLOG
+diff $TMPLOG $FWTSTESTDIR/mchi-0001/mchi-0001.log >> $FAILURE_LOG
+ret=$?
+if [ $ret -eq 0 ]; then
+ echo PASSED: $TEST, $NAME
+else
+ echo FAILED: $TEST, $NAME
+fi
+
+rm $TMPLOG
+exit $ret
diff --git a/fwts-test/mchi-0001/test-0002.sh b/fwts-test/mchi-0001/test-0002.sh
new file mode 100755
index 0000000..0081373
--- /dev/null
+++ b/fwts-test/mchi-0001/test-0002.sh
@@ -0,0 +1,17 @@
+#!/bin/bash
+#
+TEST="Test table against MCHI"
+NAME=test-0001.sh
+TMPLOG=$TMP/mchi.log.$$
+
+$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/mchi-0001/acpidump-0002.log mchi - | cut -c7- | grep "^mchi" > $TMPLOG
+diff $TMPLOG $FWTSTESTDIR/mchi-0001/mchi-0002.log >> $FAILURE_LOG
+ret=$?
+if [ $ret -eq 0 ]; then
+ echo PASSED: $TEST, $NAME
+else
+ echo FAILED: $TEST, $NAME
+fi
+
+rm $TMPLOG
+exit $ret
--
2.4.6
More information about the fwts-devel
mailing list