ACK: [PATCH 4/5] fwts-test: Update the test scripts for new test environment (LP: #1201250)
IvanHu
ivan.hu at canonical.com
Wed Feb 26 03:36:09 UTC 2014
On 02/11/2014 08:49 PM, Keng-Yu Lin wrote:
> Now the fwts-tests are run by `make check`.
> Makefile.am carries the environment variables.
> Update the scripts to use them.
>
> Signed-off-by: Keng-Yu Lin <kengyu at canonical.com>
> ---
> Makefile.am | 76 +++
> fwts-test/acpidump-0001/test-0001.sh | 4 +-
> fwts-test/acpitables-0001/test-0001.sh | 4 +-
> fwts-test/acpitables-0002/test-0001.sh | 4 +-
> fwts-test/acpitables-0002/test-0002.sh | 4 +-
> fwts-test/acpitables-0003/test-0001.sh | 4 +-
> fwts-test/acpitables-0004/test-0001.sh | 4 +-
> fwts-test/acpitables-0005/test-0001.sh | 4 +-
> fwts-test/acpitables-0006/test-0001.sh | 4 +-
> fwts-test/acpitables-0007/test-0001.sh | 4 +-
> fwts-test/acpitables-0008/test-0001.sh | 4 +-
> fwts-test/apicinstance-0001/test-0001.sh | 4 +-
> fwts-test/apicinstance-0001/test-0002.sh | 4 +-
> fwts-test/arg-help-0001/test-0001.sh | 2 +-
> fwts-test/arg-help-0001/test-0002.sh | 2 +-
> fwts-test/arg-json-0001/test-0001.sh | 6 +-
> fwts-test/arg-json-0001/test-0002.sh | 6 +-
> fwts-test/arg-json-0001/test-0003.sh | 4 +-
> fwts-test/arg-json-0001/test-0004.sh | 4 +-
> fwts-test/arg-klog-0001/test-0001.sh | 4 +-
> fwts-test/arg-klog-0001/test-0002.sh | 4 +-
> fwts-test/arg-log-fields-0001/test-0001.sh | 2 +-
> fwts-test/arg-log-format-0001/klog-0001.log | 550 ++++++++++-----------
> fwts-test/arg-log-format-0001/klog-0003.log | 394 +++++++--------
> fwts-test/arg-log-format-0001/test-0001.sh | 4 +-
> fwts-test/arg-log-format-0001/test-0002.sh | 4 +-
> fwts-test/arg-log-format-0001/test-0003.sh | 4 +-
> fwts-test/arg-log-format-0001/test-0004.sh | 4 +-
> fwts-test/arg-quiet-0001/test-0001.sh | 2 +-
> fwts-test/arg-quiet-0001/test-0002.sh | 2 +-
> fwts-test/arg-results-0001/test-0001.sh | 4 +-
> fwts-test/arg-results-0001/test-0002.sh | 4 +-
> fwts-test/arg-results-0001/test-0003.sh | 4 +-
> fwts-test/arg-results-0001/test-0004.sh | 4 +-
> fwts-test/arg-results-0001/test-0005.sh | 6 +-
> fwts-test/arg-results-0001/test-0006.sh | 6 +-
> .../arg-results-no-separators-0001/test-0001.sh | 4 +-
> .../arg-show-progress-dialog-0001/test-0001.sh | 4 +-
> .../arg-show-progress-dialog-0001/test-0002.sh | 4 +-
> fwts-test/arg-show-tests-0001/test-0001.sh | 2 +-
> fwts-test/arg-show-tests-0001/test-0002.sh | 2 +-
> fwts-test/arg-show-tests-full-0001/test-0001.sh | 2 +-
> fwts-test/arg-table-path-0001/test-0001.sh | 4 +-
> fwts-test/arg-table-path-0001/test-0002.sh | 4 +-
> fwts-test/arg-width-0001/test-0001.sh | 4 +-
> fwts-test/arg-width-0001/test-0002.sh | 4 +-
> fwts-test/arg-width-0001/test-0003.sh | 4 +-
> fwts-test/arg-width-0001/test-0004.sh | 4 +-
> fwts-test/arg-width-0001/test-0005.sh | 4 +-
> fwts-test/arg-width-0001/test-0006.sh | 4 +-
> fwts-test/arg-width-0001/test-0007.sh | 4 +-
> fwts-test/arg-width-0001/test-0008.sh | 4 +-
> fwts-test/checksum-0001/test-0001.sh | 4 +-
> fwts-test/checksum-0001/test-0003.sh | 4 +-
> fwts-test/checksum-0001/test-0004.sh | 4 +-
> fwts-test/disassemble-0001/test-0001.sh | 6 +-
> fwts-test/klog-0001/test-0001.sh | 4 +-
> fwts-test/klog-0001/test-0002.sh | 4 +-
> fwts-test/klog-0001/test-0003.sh | 4 +-
> fwts-test/klog-0002/test-0001.sh | 4 +-
> fwts-test/klog-0002/test-0002.sh | 4 +-
> fwts-test/klog-0002/test-0003.sh | 4 +-
> fwts-test/method-0001/test-0001.sh | 4 +-
> fwts-test/oops-0001/test-0001.sh | 4 +-
> fwts-test/oops-0001/test-0002.sh | 4 +-
> fwts-test/oops-0001/test-0003.sh | 4 +-
> fwts-test/osilinux-0001/test-0001.sh | 4 +-
> fwts-test/osilinux-0001/test-0002.sh | 4 +-
> fwts-test/syntaxcheck-0001/test-0001.sh | 4 +-
> fwts-test/wmi-0001/test-0001.sh | 4 +-
> fwts-test/wmi-0001/test-0002.sh | 4 +-
> fwts-test/wmi-0001/test-0003.sh | 4 +-
> 72 files changed, 683 insertions(+), 607 deletions(-)
>
> diff --git a/Makefile.am b/Makefile.am
> index 057c47c..b7c0503 100644
> --- a/Makefile.am
> +++ b/Makefile.am
> @@ -1,3 +1,79 @@
> SUBDIRS = src data src/utilities
>
> ACLOCAL_AMFLAGS = -I m4
> +
> +TESTS_ENVIRONMENT = export LC_ALL=C;
> +TESTS_ENVIRONMENT += export FWTS='$(srcdir)/src/fwts';
> +TESTS_ENVIRONMENT += export FWTSTESTDIR='$(srcdir)/fwts-test';
> +TESTS_ENVIRONMENT += export TMP=/tmp;
> +TESTS_ENVIRONMENT += export FAILURE_LOG=/tmp/failure.log;
> +
> +TESTS = fwts-test/acpidump-0001/test-0001.sh \
> + fwts-test/acpitables-0001/test-0001.sh \
> + fwts-test/acpitables-0002/test-0001.sh \
> + fwts-test/acpitables-0002/test-0002.sh \
> + fwts-test/acpitables-0003/test-0001.sh \
> + fwts-test/acpitables-0004/test-0001.sh \
> + fwts-test/acpitables-0005/test-0001.sh \
> + fwts-test/acpitables-0006/test-0001.sh \
> + fwts-test/acpitables-0007/test-0001.sh \
> + fwts-test/acpitables-0008/test-0001.sh \
> + fwts-test/apicinstance-0001/test-0001.sh \
> + fwts-test/apicinstance-0001/test-0002.sh \
> + fwts-test/arg-help-0001/test-0001.sh \
> + fwts-test/arg-help-0001/test-0002.sh \
> + fwts-test/arg-json-0001/test-0001.sh \
> + fwts-test/arg-json-0001/test-0002.sh \
> + fwts-test/arg-json-0001/test-0003.sh \
> + fwts-test/arg-json-0001/test-0004.sh \
> + fwts-test/arg-klog-0001/test-0001.sh \
> + fwts-test/arg-klog-0001/test-0002.sh \
> + fwts-test/arg-log-fields-0001/test-0001.sh \
> + fwts-test/arg-log-format-0001/test-0001.sh \
> + fwts-test/arg-log-format-0001/test-0002.sh \
> + fwts-test/arg-log-format-0001/test-0003.sh \
> + fwts-test/arg-log-format-0001/test-0004.sh \
> + fwts-test/arg-quiet-0001/test-0001.sh \
> + fwts-test/arg-quiet-0001/test-0002.sh \
> + fwts-test/arg-results-0001/test-0001.sh \
> + fwts-test/arg-results-0001/test-0002.sh \
> + fwts-test/arg-results-0001/test-0003.sh \
> + fwts-test/arg-results-0001/test-0004.sh \
> + fwts-test/arg-results-0001/test-0005.sh \
> + fwts-test/arg-results-0001/test-0006.sh \
> + fwts-test/arg-results-no-separators-0001/test-0001.sh \
> + fwts-test/arg-show-progress-dialog-0001/test-0001.sh \
> + fwts-test/arg-show-progress-dialog-0001/test-0002.sh \
> + fwts-test/arg-show-tests-0001/test-0001.sh \
> + fwts-test/arg-show-tests-0001/test-0002.sh \
> + fwts-test/arg-show-tests-full-0001/test-0001.sh \
> + fwts-test/arg-table-path-0001/test-0001.sh \
> + fwts-test/arg-table-path-0001/test-0002.sh \
> + fwts-test/arg-width-0001/test-0001.sh \
> + fwts-test/arg-width-0001/test-0002.sh \
> + fwts-test/arg-width-0001/test-0003.sh \
> + fwts-test/arg-width-0001/test-0004.sh \
> + fwts-test/arg-width-0001/test-0005.sh \
> + fwts-test/arg-width-0001/test-0006.sh \
> + fwts-test/arg-width-0001/test-0007.sh \
> + fwts-test/arg-width-0001/test-0008.sh \
> + fwts-test/checksum-0001/test-0001.sh \
> + fwts-test/checksum-0001/test-0003.sh \
> + fwts-test/checksum-0001/test-0004.sh \
> + fwts-test/disassemble-0001/test-0001.sh \
> + fwts-test/klog-0001/test-0001.sh \
> + fwts-test/klog-0001/test-0002.sh \
> + fwts-test/klog-0001/test-0003.sh \
> + fwts-test/klog-0002/test-0001.sh \
> + fwts-test/klog-0002/test-0002.sh \
> + fwts-test/klog-0002/test-0003.sh \
> + fwts-test/method-0001/test-0001.sh \
> + fwts-test/oops-0001/test-0001.sh \
> + fwts-test/oops-0001/test-0002.sh \
> + fwts-test/oops-0001/test-0003.sh \
> + fwts-test/osilinux-0001/test-0001.sh \
> + fwts-test/osilinux-0001/test-0002.sh \
> + fwts-test/syntaxcheck-0001/test-0001.sh \
> + fwts-test/wmi-0001/test-0001.sh \
> + fwts-test/wmi-0001/test-0002.sh \
> + fwts-test/wmi-0001/test-0003.sh
> diff --git a/fwts-test/acpidump-0001/test-0001.sh b/fwts-test/acpidump-0001/test-0001.sh
> index fa0a1ef..94b3cdd 100755
> --- a/fwts-test/acpidump-0001/test-0001.sh
> +++ b/fwts-test/acpidump-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test acpidump against known ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpidump.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump.log acpidump - | grep "^[0-9]*[ ]*acpidump" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpidump-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpidump-0001/acpidump.log acpidump - | grep "^[0-9]*[ ]*acpidump" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpidump-0001/acpidump-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0001/test-0001.sh b/fwts-test/acpitables-0001/test-0001.sh
> index 47fc7c4..f349698 100755
> --- a/fwts-test/acpitables-0001/test-0001.sh
> +++ b/fwts-test/acpitables-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against known correct ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0001/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0001/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0002/test-0001.sh b/fwts-test/acpitables-0002/test-0001.sh
> index 9081182..94432fc 100755
> --- a/fwts-test/acpitables-0002/test-0001.sh
> +++ b/fwts-test/acpitables-0002/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against known correct ACPI APIC tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0002/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0002/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0002/test-0002.sh b/fwts-test/acpitables-0002/test-0002.sh
> index 4162a05..dff2ee3 100755
> --- a/fwts-test/acpitables-0002/test-0002.sh
> +++ b/fwts-test/acpitables-0002/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against incorrect ACPI APIC tables"
> NAME=test-0002.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables"| cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0002/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables"| cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0002/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0003/test-0001.sh b/fwts-test/acpitables-0003/test-0001.sh
> index 8fff054..7f35850 100755
> --- a/fwts-test/acpitables-0003/test-0001.sh
> +++ b/fwts-test/acpitables-0003/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against broken ACPI FADT"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0003/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0003/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0004/test-0001.sh b/fwts-test/acpitables-0004/test-0001.sh
> index 70a8601..cd90205 100755
> --- a/fwts-test/acpitables-0004/test-0001.sh
> +++ b/fwts-test/acpitables-0004/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against broken ACPI HPET table"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0004/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0004/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0005/test-0001.sh b/fwts-test/acpitables-0005/test-0001.sh
> index cb26cb7..b6c1c5b 100755
> --- a/fwts-test/acpitables-0005/test-0001.sh
> +++ b/fwts-test/acpitables-0005/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against broken ACPI MCFG table"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0005/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0005/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0006/test-0001.sh b/fwts-test/acpitables-0006/test-0001.sh
> index 2036d3a..77d2c8b 100755
> --- a/fwts-test/acpitables-0006/test-0001.sh
> +++ b/fwts-test/acpitables-0006/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against broken ACPI RSDT table"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0006/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0006/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0007/test-0001.sh b/fwts-test/acpitables-0007/test-0001.sh
> index 770a8d3..8ca8ce9 100755
> --- a/fwts-test/acpitables-0007/test-0001.sh
> +++ b/fwts-test/acpitables-0007/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against broken ACPI XSDT table"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0007/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0007/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/acpitables-0008/test-0001.sh b/fwts-test/acpitables-0008/test-0001.sh
> index 844cfeb..68e7c5a 100755
> --- a/fwts-test/acpitables-0008/test-0001.sh
> +++ b/fwts-test/acpitables-0008/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apcitables against broken ACPI RSDP"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpitables.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> -diff $TMPLOG acpitables-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/acpitables-0008/acpidump-0001.log acpitables - | grep "^[0-9]*[ ]*acpitables" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/acpitables-0008/acpitables-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/apicinstance-0001/test-0001.sh b/fwts-test/apicinstance-0001/test-0001.sh
> index 799cf4c..964b0d9 100755
> --- a/fwts-test/apicinstance-0001/test-0001.sh
> +++ b/fwts-test/apicinstance-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test apicinstance against known incorrect ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/apicinstance.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log apicinstance - | grep "^[0-9]*[ ]*apicinstance" | cut -c7- > $TMPLOG
> -diff $TMPLOG apicinstance-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/apicinstance-0001/acpidump-0001.log apicinstance - | grep "^[0-9]*[ ]*apicinstance" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/apicinstance-0001/apicinstance-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/apicinstance-0001/test-0002.sh b/fwts-test/apicinstance-0001/test-0002.sh
> index 0cb6c59..c92e16b 100755
> --- a/fwts-test/apicinstance-0001/test-0002.sh
> +++ b/fwts-test/apicinstance-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test apicinstance against known correct ACPI tables"
> NAME=test-0002.sh
> TMPLOG=$TMP/apicinstance.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0002.log apicinstance - | grep "^[0-9]*[ ]*apicinstance" | cut -c7- > $TMPLOG
> -diff $TMPLOG apicinstance-0002.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/apicinstance-0001/acpidump-0002.log apicinstance - | grep "^[0-9]*[ ]*apicinstance" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/apicinstance-0001/apicinstance-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-help-0001/test-0001.sh b/fwts-test/arg-help-0001/test-0001.sh
> index 3dbee2e..d25f0ed 100755
> --- a/fwts-test/arg-help-0001/test-0001.sh
> +++ b/fwts-test/arg-help-0001/test-0001.sh
> @@ -7,7 +7,7 @@ HERE=`pwd`
>
> stty cols 80
> $FWTS -h | grep -v "Show version" | grep -v "Usage" > $TMPLOG
> -diff $TMPLOG arg-help-0001.log >> $FAILURE_LOG
> +diff $TMPLOG $FWTSTESTDIR/arg-help-0001/arg-help-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-help-0001/test-0002.sh b/fwts-test/arg-help-0001/test-0002.sh
> index b2e271b..d23162e 100755
> --- a/fwts-test/arg-help-0001/test-0002.sh
> +++ b/fwts-test/arg-help-0001/test-0002.sh
> @@ -8,7 +8,7 @@ HERE=`pwd`
> stty cols 80
>
> $FWTS --help | grep -v "Show version" | grep -v "Usage" > $TMPLOG
> -diff $TMPLOG arg-help-0002.log >> $FAILURE_LOG
> +diff $TMPLOG fwts-test/arg-help-0001/arg-help-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-json-0001/test-0001.sh b/fwts-test/arg-json-0001/test-0001.sh
> index 56b61fd..23e0bb8 100755
> --- a/fwts-test/arg-json-0001/test-0001.sh
> +++ b/fwts-test/arg-json-0001/test-0001.sh
> @@ -3,10 +3,10 @@
> TEST="Test --json-data-path option"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
> -HERE=`pwd`
> +HERE=$FWTSTESTDIR/arg-json-0001
>
> -$FWTS --log-format="%line %owner " -w 80 --json-data-path=$HERE --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --json-data-path=$HERE --klog=$FWTSTESTDIR/arg-json-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-json-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-json-0001/test-0002.sh b/fwts-test/arg-json-0001/test-0002.sh
> index 4992302..3c6811c 100755
> --- a/fwts-test/arg-json-0001/test-0002.sh
> +++ b/fwts-test/arg-json-0001/test-0002.sh
> @@ -3,10 +3,10 @@
> TEST="Test -j option"
> NAME=test-0002.sh
> TMPLOG=$TMP/klog.log.$$
> -HERE=`pwd`
> +HERE=$FWTSTESTDIR/arg-json-0001
>
> -$FWTS --log-format="%line %owner " -w 80 -j $HERE --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0002.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $HERE --klog=$FWTSTESTDIR/arg-json-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-json-0001/klog-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-json-0001/test-0003.sh b/fwts-test/arg-json-0001/test-0003.sh
> index c6b90cb..b265b43 100755
> --- a/fwts-test/arg-json-0001/test-0003.sh
> +++ b/fwts-test/arg-json-0001/test-0003.sh
> @@ -5,8 +5,8 @@ NAME=test-0003.sh
> TMPLOG=$TMP/klog.log.$$
> HERE=`pwd`
>
> -$FWTS --log-format="%line %owner " -w 80 --json-data-path=/xxxx/fooo --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --json-data-path=/xxxx/fooo --klog=$FWTSTESTDIR/arg-json-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-json-0001/klog-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-json-0001/test-0004.sh b/fwts-test/arg-json-0001/test-0004.sh
> index e8fdbc8..1e9e38f 100755
> --- a/fwts-test/arg-json-0001/test-0004.sh
> +++ b/fwts-test/arg-json-0001/test-0004.sh
> @@ -5,8 +5,8 @@ NAME=test-0004.sh
> TMPLOG=$TMP/klog.log.$$
> HERE=`pwd`
>
> -$FWTS --log-format="%line %owner " -w 80 -j /xxxx/fooo --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0004.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j /xxxx/fooo --klog=$FWTSTESTDIR/arg-json-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-json-0001/klog-0004.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-klog-0001/test-0001.sh b/fwts-test/arg-klog-0001/test-0001.sh
> index 127b8a1..4e1bb79 100755
> --- a/fwts-test/arg-klog-0001/test-0001.sh
> +++ b/fwts-test/arg-klog-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test --klog option"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-klog-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-klog-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-klog-0001/test-0002.sh b/fwts-test/arg-klog-0001/test-0002.sh
> index 9144897..4a26bb3 100755
> --- a/fwts-test/arg-klog-0001/test-0002.sh
> +++ b/fwts-test/arg-klog-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test -k option"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 -k klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data -k $FWTSTESTDIR/arg-klog-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-klog-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-log-fields-0001/test-0001.sh b/fwts-test/arg-log-fields-0001/test-0001.sh
> index d04a429..be9c359 100755
> --- a/fwts-test/arg-log-fields-0001/test-0001.sh
> +++ b/fwts-test/arg-log-fields-0001/test-0001.sh
> @@ -5,7 +5,7 @@ NAME=test-0001.sh
> TMPLOG=$TMP/logfields.log.$$
>
> $FWTS --log-fields > $TMPLOG
> -diff $TMPLOG logfields-0001.log >> $FAILURE_LOG
> +diff $TMPLOG $FWTSTESTDIR/arg-log-fields-0001/logfields-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-log-format-0001/klog-0001.log b/fwts-test/arg-log-format-0001/klog-0001.log
> index 7c5b81a..db134e0 100644
> --- a/fwts-test/arg-log-format-0001/klog-0001.log
> +++ b/fwts-test/arg-log-format-0001/klog-0001.log
> @@ -1,275 +1,275 @@
> -klog (00019) <16/05/12> HED : klog: Scan kernel log for errors and
> -klog (00020) <16/05/12> HED : warnings.
> -klog (00021) <16/05/12> SEP : --------------------------------------
> -klog (00022) <16/05/12> INF : Test 1 of 1: Kernel log error check.
> -klog (00023) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00024) <16/05/12> FAL H: KlogAcpiMultipleApicMadtFound: Test 1,
> -klog (00025) <16/05/12> FAL H: HIGH Kernel message: [ 0.000000] ACPI:
> -klog (00026) <16/05/12> FAL H: BIOS bug: multiple APIC/MADT found,
> -klog (00027) <16/05/12> FAL H: using 0
> -klog (00028) <16/05/12> NLN :
> -klog (00029) <16/05/12> ADV : ADVICE: The kernel has detected more
> -klog (00030) <16/05/12> ADV : than one ACPI Multiple APIC
> -klog (00031) <16/05/12> ADV : Description Table (MADT) (these tables
> -klog (00032) <16/05/12> ADV : have the "APIC" signature). There
> -klog (00033) <16/05/12> ADV : should only be one MADT and the kernel
> -klog (00034) <16/05/12> ADV : will by default select the first one.
> -klog (00035) <16/05/12> ADV : However, one can override this and
> -klog (00036) <16/05/12> ADV : select the Nth MADT using
> -klog (00037) <16/05/12> ADV : acpi_apic_instance=N.
> -klog (00038) <16/05/12> NLN :
> -klog (00039) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00040) <16/05/12> FAL H: KlogAcpi32Bit64BitAddressMismatch:
> -klog (00041) <16/05/12> FAL H: Test 1, HIGH Kernel message: [
> -klog (00042) <16/05/12> FAL H: 0.000000] ACPI Error: 32/64X address
> -klog (00043) <16/05/12> FAL H: mismatch in Gpe0Block: 00008018
> -klog (00044) <16/05/12> FAL H: /0000000000008028, using 32 (20090903
> -klog (00045) <16/05/12> FAL H: /tbfadt-427)
> -klog (00046) <16/05/12> NLN :
> -klog (00047) <16/05/12> ADV : ADVICE: The FADT table contains a
> -klog (00048) <16/05/12> ADV : mismatch between a 32 bit pointer and
> -klog (00049) <16/05/12> ADV : a 64 bit Generic Address pointer.
> -klog (00050) <16/05/12> ADV : Because these pointers are different,
> -klog (00051) <16/05/12> ADV : it suggests either one of them is
> -klog (00052) <16/05/12> ADV : incorrect. If a non-null 32 bit
> -klog (00053) <16/05/12> ADV : pointer exists, then the kernel will
> -klog (00054) <16/05/12> ADV : opt for this in preference to the 64
> -klog (00055) <16/05/12> ADV : bit pointer even though this is not in
> -klog (00056) <16/05/12> ADV : accordance to the ACPI specification.
> -klog (00057) <16/05/12> NLN :
> -klog (00058) <16/05/12> FAL C: FAILED [CRITICAL]
> -klog (00059) <16/05/12> FAL C: KlogAcpiValidRsdpNotFound: Test 1,
> -klog (00060) <16/05/12> FAL C: CRITICAL Kernel message: [ 0.000000]
> -klog (00061) <16/05/12> FAL C: ACPI Error: A valid RSDP was not found
> -klog (00062) <16/05/12> FAL C: (20090903/tbxfroot-219)
> -klog (00063) <16/05/12> NLN :
> -klog (00064) <16/05/12> ADV : ADVICE: An ACPI compatible system must
> -klog (00065) <16/05/12> ADV : provide an RSDP (Root System
> -klog (00066) <16/05/12> ADV : Description Pointer). This structure
> -klog (00067) <16/05/12> ADV : provides the physical address of the
> -klog (00068) <16/05/12> ADV : RSDT and XSDT. Since this could not be
> -klog (00069) <16/05/12> ADV : found, the ACPI driver has had to
> -klog (00070) <16/05/12> ADV : disable ACPI support.
> -klog (00071) <16/05/12> NLN :
> -klog (00072) <16/05/12> FAL H: FAILED [HIGH] KlogAcpiTwoFacs: Test 1,
> -klog (00073) <16/05/12> FAL H: HIGH Kernel message: [ 0.000000] ACPI
> -klog (00074) <16/05/12> FAL H: Warning: 32/64 FACS address mismatch
> -klog (00075) <16/05/12> FAL H: in FADT - two FACS tables! (20090903
> -klog (00076) <16/05/12> FAL H: /tbfadt-369)
> -klog (00077) <16/05/12> NLN :
> -klog (00078) <16/05/12> ADV : ADVICE: The FADT table contains a
> -klog (00079) <16/05/12> ADV : mismatch between the 32 bit pointer
> -klog (00080) <16/05/12> ADV : (FIRMWARE_CTRL) and 64 bit pointer
> -klog (00081) <16/05/12> ADV : (X_FIRMWARE_CTRL) pointer to the FACS
> -klog (00082) <16/05/12> ADV : table. Section 5.2.9 of version 4.0a
> -klog (00083) <16/05/12> ADV : of the ACPI specification states that
> -klog (00084) <16/05/12> ADV : X_FIRMWARE_CTRL should be zero if
> -klog (00085) <16/05/12> ADV : FIRMWARE_CTRL is defined, or
> -klog (00086) <16/05/12> ADV : FIRMWARE_CTRL should be zero if
> -klog (00087) <16/05/12> ADV : X_FIRMWARE_CTRL is zero. With two
> -klog (00088) <16/05/12> ADV : different pointers defined, the kernel
> -klog (00089) <16/05/12> ADV : has to make a choice, and opts for the
> -klog (00090) <16/05/12> ADV : 32 bit pointer. Because these pointers
> -klog (00091) <16/05/12> ADV : are different, it suggests either one
> -klog (00092) <16/05/12> ADV : of them is incorrect, or different 32
> -klog (00093) <16/05/12> ADV : bit and 64 bit FACS tables are present
> -klog (00094) <16/05/12> ADV : in your system, which is NOT complaint
> -klog (00095) <16/05/12> ADV : with the ACPI specification. The
> -klog (00096) <16/05/12> ADV : kernel has to make a choice and opts
> -klog (00097) <16/05/12> ADV : for the 32 bit FIRMWARE_CTRL.
> -klog (00098) <16/05/12> NLN :
> -klog (00099) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00100) <16/05/12> FAL H: KlogAcpi32Bit64BitAddressMismatchInFadt
> -klog (00101) <16/05/12> FAL H: : Test 1, HIGH Kernel message: [
> -klog (00102) <16/05/12> FAL H: 0.000000] ACPI Warning: 32/64X FACS
> -klog (00103) <16/05/12> FAL H: address mismatch in FADT - DEF2DF40
> -klog (00104) <16/05/12> FAL H: /00000000DEF30D40, using 32 (20090903
> -klog (00105) <16/05/12> FAL H: /tbfadt-486)
> -klog (00106) <16/05/12> NLN :
> -klog (00107) <16/05/12> ADV : ADVICE: The FADT table contains
> -klog (00108) <16/05/12> ADV : Generic Address Structure that has a
> -klog (00109) <16/05/12> ADV : mismatch between the 32 bit and 64 bit
> -klog (00110) <16/05/12> ADV : versions of an address. This should be
> -klog (00111) <16/05/12> ADV : fixed so there are no mismatches.
> -klog (00112) <16/05/12> NLN :
> -klog (00113) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00114) <16/05/12> FAL H: KlogAcpi32Bit64BitAddressMismatchInFadt
> -klog (00115) <16/05/12> FAL H: : Test 1, HIGH Kernel message: [
> -klog (00116) <16/05/12> FAL H: 0.000000] ACPI Warning: 32/64X length
> -klog (00117) <16/05/12> FAL H: mismatch in Gpe1Block: 0/32 20090521
> -klog (00118) <16/05/12> FAL H: tbfadt-527
> -klog (00119) <16/05/12> NLN :
> -klog (00120) <16/05/12> ADV : ADVICE: The FADT table contains
> -klog (00121) <16/05/12> ADV : Generic Address Structure that has a
> -klog (00122) <16/05/12> ADV : mismatch between the 32 bit and 64 bit
> -klog (00123) <16/05/12> ADV : versions of an address. This should be
> -klog (00124) <16/05/12> ADV : fixed so there are no mismatches.
> -klog (00125) <16/05/12> NLN :
> -klog (00126) <16/05/12> FAL H: FAILED [HIGH] KlogAcpiBadAmlCode: Test
> -klog (00127) <16/05/12> FAL H: 1, HIGH Kernel message: [ 0.000000]
> -klog (00128) <16/05/12> FAL H: ACPI Warning: BIOS XSDT has NULL entry
> -klog (00129) <16/05/12> FAL H: , using RSDT (20110112/tbutils-663)
> -klog (00130) <16/05/12> NLN :
> -klog (00131) <16/05/12> ADV : ADVICE: ACPI AML intepreter has found
> -klog (00132) <16/05/12> ADV : some non-conforming AML code. This
> -klog (00133) <16/05/12> ADV : should be investigated and fixed.
> -klog (00134) <16/05/12> NLN :
> -klog (00135) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00136) <16/05/12> FAL H: KlogAcpiFadtInvalidLength: Test 1,
> -klog (00137) <16/05/12> FAL H: HIGH Kernel message: [ 0.000000] ACPI
> -klog (00138) <16/05/12> FAL H: Warning: Invalid length for
> -klog (00139) <16/05/12> FAL H: Pm1aControlBlock: 32, using default 16
> -klog (00140) <16/05/12> FAL H: (20090903/tbfadt-607)
> -klog (00141) <16/05/12> NLN :
> -klog (00142) <16/05/12> ADV : ADVICE: This item in the FADT is the
> -klog (00143) <16/05/12> ADV : incorrect length. Should be corrected.
> -klog (00144) <16/05/12> NLN :
> -klog (00145) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00146) <16/05/12> FAL H: KlogAcpiOptionalFieldZeroAddressOrLength
> -klog (00147) <16/05/12> FAL H: : Test 1, HIGH Kernel message: [
> -klog (00148) <16/05/12> FAL H: 0.000000] ACPI Warning: Optional field
> -klog (00149) <16/05/12> FAL H: Gpe1Block has zero address or length:
> -klog (00150) <16/05/12> FAL H: 000000000000102C/0 20090521 tbfadt-558
> -klog (00151) <16/05/12> NLN :
> -klog (00152) <16/05/12> ADV : ADVICE: An ACPI table contains Generic
> -klog (00153) <16/05/12> ADV : Address Structure that has an address
> -klog (00154) <16/05/12> ADV : that is incorrectly set to zero, or a
> -klog (00155) <16/05/12> ADV : zero length. This needs to be fixed.
> -klog (00156) <16/05/12> NLN :
> -klog (00157) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00158) <16/05/12> FAL H: KlogAcpiOptionalFieldZeroAddressOrLength
> -klog (00159) <16/05/12> FAL H: : Test 1, HIGH Kernel message: [
> -klog (00160) <16/05/12> FAL H: 0.000000] ACPI Warning: Optional field
> -klog (00161) <16/05/12> FAL H: Pm2ControlBlock has zero address or
> -klog (00162) <16/05/12> FAL H: length: 0000000000000000/1 20090521
> -klog (00163) <16/05/12> FAL H: tbfadt-558
> -klog (00164) <16/05/12> NLN :
> -klog (00165) <16/05/12> ADV : ADVICE: An ACPI table contains Generic
> -klog (00166) <16/05/12> ADV : Address Structure that has an address
> -klog (00167) <16/05/12> ADV : that is incorrectly set to zero, or a
> -klog (00168) <16/05/12> ADV : zero length. This needs to be fixed.
> -klog (00169) <16/05/12> NLN :
> -klog (00170) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00171) <16/05/12> FAL H: KlogAcpiOptionalFieldZeroAddressOrLength
> -klog (00172) <16/05/12> FAL H: : Test 1, HIGH Kernel message: [
> -klog (00173) <16/05/12> FAL H: 0.000000] ACPI Warning (tbfadt-0460):
> -klog (00174) <16/05/12> FAL H: Optional field "Gpe1Block" has zero
> -klog (00175) <16/05/12> FAL H: address or length: 000000000000102C/0
> -klog (00176) <16/05/12> FAL H: [20080926]
> -klog (00177) <16/05/12> NLN :
> -klog (00178) <16/05/12> ADV : ADVICE: An ACPI table contains Generic
> -klog (00179) <16/05/12> ADV : Address Structure that has an address
> -klog (00180) <16/05/12> ADV : that is incorrectly set to zero, or a
> -klog (00181) <16/05/12> ADV : zero length. This needs to be fixed.
> -klog (00182) <16/05/12> NLN :
> -klog (00183) <16/05/12> FAL M: FAILED [MEDIUM]
> -klog (00184) <16/05/12> FAL M: KlogBiosMtrrIncorrectMask: Test 1,
> -klog (00185) <16/05/12> FAL M: MEDIUM Kernel message: [ 0.000000]
> -klog (00186) <16/05/12> FAL M: mtrr: your BIOS has configured an
> -klog (00187) <16/05/12> FAL M: incorrect mask, fixing it.
> -klog (00188) <16/05/12> NLN :
> -klog (00189) <16/05/12> ADV : ADVICE: The Memory Type Range
> -klog (00190) <16/05/12> ADV : Registers (MTRRs) which define memory
> -klog (00191) <16/05/12> ADV : caching policy are misconfigued by the
> -klog (00192) <16/05/12> ADV : BIOS. In this case, the mask is
> -klog (00193) <16/05/12> ADV : incorrectly set and the kernel has
> -klog (00194) <16/05/12> ADV : detected this and worked around the
> -klog (00195) <16/05/12> ADV : firmware bug.
> -klog (00196) <16/05/12> NLN :
> -klog (00197) <16/05/12> FAL C: FAILED [CRITICAL]
> -klog (00198) <16/05/12> FAL C: KlogBiosCpuMtrrMisconfigured: Test 1,
> -klog (00199) <16/05/12> FAL C: CRITICAL Kernel message: [ 0.000000]
> -klog (00200) <16/05/12> FAL C: WARNING: BIOS bug: CPU MTRRs don't
> -klog (00201) <16/05/12> FAL C: cover all of memory, losing 1408MB of
> -klog (00202) <16/05/12> FAL C: RAM.
> -klog (00203) <16/05/12> NLN :
> -klog (00204) <16/05/12> ADV : ADVICE: The Memory Type Range
> -klog (00205) <16/05/12> ADV : Registers (MTRRs) which define memory
> -klog (00206) <16/05/12> ADV : caching policy are misconfigued by the
> -klog (00207) <16/05/12> ADV : BIOS and don't appear to cover all
> -klog (00208) <16/05/12> ADV : available physical memory. The kernel
> -klog (00209) <16/05/12> ADV : has detected this and has reduced the
> -klog (00210) <16/05/12> ADV : amount of memory available to be safe.
> -klog (00211) <16/05/12> ADV : Either check that the BIOS memory
> -klog (00212) <16/05/12> ADV : caching options are set correctly or
> -klog (00213) <16/05/12> ADV : contact your BIOS vendor to get this
> -klog (00214) <16/05/12> ADV : fixed.
> -klog (00215) <16/05/12> NLN :
> -klog (00216) <16/05/12> FAL H: FAILED [HIGH] KlogAcpiUnknownAmlOpcode
> -klog (00217) <16/05/12> FAL H: : Test 1, HIGH Kernel message: [
> -klog (00218) <16/05/12> FAL H: 0.022719] ACPI Error: Found unknown
> -klog (00219) <16/05/12> FAL H: opcode 0xFD at AML address f7ffe14c
> -klog (00220) <16/05/12> FAL H: offset 0xE8, ignoring (20110112
> -klog (00221) <16/05/12> FAL H: /psloop-141)
> -klog (00222) <16/05/12> NLN :
> -klog (00223) <16/05/12> ADV : ADVICE: ACPI execution run time error:
> -klog (00224) <16/05/12> ADV : The ACPI interpreter has reached an
> -klog (00225) <16/05/12> ADV : opcode that is unknown, this normally
> -klog (00226) <16/05/12> ADV : is a bug in the underlying AML code
> -klog (00227) <16/05/12> ADV : either because of badly written AML
> -klog (00228) <16/05/12> ADV : code or the compiler has produced code
> -klog (00229) <16/05/12> ADV : that is incorrect or the ACPI
> -klog (00230) <16/05/12> ADV : interpreter does not support this
> -klog (00231) <16/05/12> ADV : valid opcode.
> -klog (00232) <16/05/12> NLN :
> -klog (00233) <16/05/12> FAL C: FAILED [CRITICAL]
> -klog (00234) <16/05/12> FAL C: KlogAcpiDetectedUnsupportedOpCode:
> -klog (00235) <16/05/12> FAL C: Test 1, CRITICAL Kernel message: [
> -klog (00236) <16/05/12> FAL C: 0.025463] ACPI Warning: Detected an
> -klog (00237) <16/05/12> FAL C: unsupported executable opcode at
> -klog (00238) <16/05/12> FAL C: module-level: [0x007B] at table offset
> -klog (00239) <16/05/12> FAL C: 0x00C3 (20110112/psloop-526)
> -klog (00240) <16/05/12> NLN :
> -klog (00241) <16/05/12> ADV : ADVICE: An illegal AML opcode has been
> -klog (00242) <16/05/12> ADV : found and is ignored. This indicates
> -klog (00243) <16/05/12> ADV : either badly compiled code or opcode
> -klog (00244) <16/05/12> ADV : corruption in the DSDT or SSDT tables
> -klog (00245) <16/05/12> ADV : or a bug in the ACPI execution engine.
> -klog (00246) <16/05/12> ADV : Recommend disassembing using iasl to
> -klog (00247) <16/05/12> ADV : find any offending code.
> -klog (00248) <16/05/12> NLN :
> -klog (00249) <16/05/12> FAL H: FAILED [HIGH]
> -klog (00250) <16/05/12> FAL H: KlogAcpiObjectAlreadyExists: Test 1,
> -klog (00251) <16/05/12> FAL H: HIGH Kernel message: [ 0.034090] ACPI
> -klog (00252) <16/05/12> FAL H: Error: Method parse/execution failed
> -klog (00253) <16/05/12> FAL H: [_SB_.PCI0._OSC] (Node ee025630),
> -klog (00254) <16/05/12> FAL H: AE_ALREADY_EXISTS (20110112
> -klog (00255) <16/05/12> FAL H: /psparse-536)
> -klog (00256) <16/05/12> NLN :
> -klog (00257) <16/05/12> ADV : ADVICE: This is a bug picked up by the
> -klog (00258) <16/05/12> ADV : kernel, but as yet, the firmware test
> -klog (00259) <16/05/12> ADV : suite has no diagnostic advice for
> -klog (00260) <16/05/12> ADV : this particular problem.
> -klog (00261) <16/05/12> NLN :
> -klog (00262) <16/05/12> FAL H: FAILED [HIGH] KlogAcpiFirmwareError:
> -klog (00263) <16/05/12> FAL H: Test 1, HIGH Kernel message: [
> -klog (00264) <16/05/12> FAL H: 0.040119] [Firmware Bug]: the BIOS has
> -klog (00265) <16/05/12> FAL H: corrupted hw-PMU resources (MSR 186 is
> -klog (00266) <16/05/12> FAL H: 400000)
> -klog (00267) <16/05/12> NLN :
> -klog (00268) <16/05/12> ADV : ADVICE: The kernel has detected a
> -klog (00269) <16/05/12> ADV : Firmware bug in the BIOS or ACPI which
> -klog (00270) <16/05/12> ADV : needs investigating and fixing.
> -klog (00271) <16/05/12> NLN :
> -klog (00272) <16/05/12> FAL C: FAILED [CRITICAL]
> -klog (00273) <16/05/12> FAL C: KlogAcpiDetectedUnsupportedOpCode:
> -klog (00274) <16/05/12> FAL C: Test 1, CRITICAL Kernel message: [
> -klog (00275) <16/05/12> FAL C: 0.042222] ACPI Warning: Detected an
> -klog (00276) <16/05/12> FAL C: unsupported executable opcode at
> -klog (00277) <16/05/12> FAL C: module-level: [0x0070] at table offset
> -klog (00278) <16/05/12> FAL C: 0x2366 (20100121/psloop-526)
> -klog (00279) <16/05/12> NLN :
> -klog (00280) <16/05/12> ADV : ADVICE: An illegal AML opcode has been
> -klog (00281) <16/05/12> ADV : found and is ignored. This indicates
> -klog (00282) <16/05/12> ADV : either badly compiled code or opcode
> -klog (00283) <16/05/12> ADV : corruption in the DSDT or SSDT tables
> -klog (00284) <16/05/12> ADV : or a bug in the ACPI execution engine.
> -klog (00285) <16/05/12> ADV : Recommend disassembing using iasl to
> -klog (00286) <16/05/12> ADV : find any offending code.
> -klog (00287) <16/05/12> NLN :
> -klog (00288) <16/05/12> INF : Found 18 unique errors in kernel log.
> -klog (00289) <16/05/12> NLN :
> -klog (00290) <16/05/12> SEP : ======================================
> -klog (00291) <16/05/12> SUM : 0 passed, 18 failed, 0 warning, 0
> -klog (00292) <16/05/12> SUM : aborted, 0 skipped, 0 info only.
> -klog (00293) <16/05/12> SEP : ======================================
> +klog (00021) <10/02/14> HED : klog: Scan kernel log for errors and
> +klog (00022) <10/02/14> HED : warnings.
> +klog (00023) <10/02/14> SEP : --------------------------------------
> +klog (00024) <10/02/14> INF : Test 1 of 1: Kernel log error check.
> +klog (00025) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00026) <10/02/14> FAL H: KlogAcpiMultipleApicMadtFound: Test 1,
> +klog (00027) <10/02/14> FAL H: HIGH Kernel message: [ 0.000000] ACPI:
> +klog (00028) <10/02/14> FAL H: BIOS bug: multiple APIC/MADT found,
> +klog (00029) <10/02/14> FAL H: using 0
> +klog (00030) <10/02/14> NLN :
> +klog (00031) <10/02/14> ADV : ADVICE: The kernel has detected more
> +klog (00032) <10/02/14> ADV : than one ACPI Multiple APIC
> +klog (00033) <10/02/14> ADV : Description Table (MADT) (these tables
> +klog (00034) <10/02/14> ADV : have the "APIC" signature). There
> +klog (00035) <10/02/14> ADV : should only be one MADT and the kernel
> +klog (00036) <10/02/14> ADV : will by default select the first one.
> +klog (00037) <10/02/14> ADV : However, one can override this and
> +klog (00038) <10/02/14> ADV : select the Nth MADT using
> +klog (00039) <10/02/14> ADV : acpi_apic_instance=N.
> +klog (00040) <10/02/14> NLN :
> +klog (00041) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00042) <10/02/14> FAL H: KlogAcpi32Bit64BitAddressMismatch:
> +klog (00043) <10/02/14> FAL H: Test 1, HIGH Kernel message: [
> +klog (00044) <10/02/14> FAL H: 0.000000] ACPI Error: 32/64X address
> +klog (00045) <10/02/14> FAL H: mismatch in Gpe0Block: 00008018
> +klog (00046) <10/02/14> FAL H: /0000000000008028, using 32 (20090903
> +klog (00047) <10/02/14> FAL H: /tbfadt-427)
> +klog (00048) <10/02/14> NLN :
> +klog (00049) <10/02/14> ADV : ADVICE: The FADT table contains a
> +klog (00050) <10/02/14> ADV : mismatch between a 32 bit pointer and
> +klog (00051) <10/02/14> ADV : a 64 bit Generic Address pointer.
> +klog (00052) <10/02/14> ADV : Because these pointers are different,
> +klog (00053) <10/02/14> ADV : it suggests either one of them is
> +klog (00054) <10/02/14> ADV : incorrect. If a non-null 32 bit
> +klog (00055) <10/02/14> ADV : pointer exists, then the kernel will
> +klog (00056) <10/02/14> ADV : opt for this in preference to the 64
> +klog (00057) <10/02/14> ADV : bit pointer even though this is not in
> +klog (00058) <10/02/14> ADV : accordance to the ACPI specification.
> +klog (00059) <10/02/14> NLN :
> +klog (00060) <10/02/14> FAL C: FAILED [CRITICAL]
> +klog (00061) <10/02/14> FAL C: KlogAcpiValidRsdpNotFound: Test 1,
> +klog (00062) <10/02/14> FAL C: CRITICAL Kernel message: [ 0.000000]
> +klog (00063) <10/02/14> FAL C: ACPI Error: A valid RSDP was not found
> +klog (00064) <10/02/14> FAL C: (20090903/tbxfroot-219)
> +klog (00065) <10/02/14> NLN :
> +klog (00066) <10/02/14> ADV : ADVICE: An ACPI compatible system must
> +klog (00067) <10/02/14> ADV : provide an RSDP (Root System
> +klog (00068) <10/02/14> ADV : Description Pointer). This structure
> +klog (00069) <10/02/14> ADV : provides the physical address of the
> +klog (00070) <10/02/14> ADV : RSDT and XSDT. Since this could not be
> +klog (00071) <10/02/14> ADV : found, the ACPI driver has had to
> +klog (00072) <10/02/14> ADV : disable ACPI support.
> +klog (00073) <10/02/14> NLN :
> +klog (00074) <10/02/14> FAL H: FAILED [HIGH] KlogAcpiTwoFacs: Test 1,
> +klog (00075) <10/02/14> FAL H: HIGH Kernel message: [ 0.000000] ACPI
> +klog (00076) <10/02/14> FAL H: Warning: 32/64 FACS address mismatch
> +klog (00077) <10/02/14> FAL H: in FADT - two FACS tables! (20090903
> +klog (00078) <10/02/14> FAL H: /tbfadt-369)
> +klog (00079) <10/02/14> NLN :
> +klog (00080) <10/02/14> ADV : ADVICE: The FADT table contains a
> +klog (00081) <10/02/14> ADV : mismatch between the 32 bit pointer
> +klog (00082) <10/02/14> ADV : (FIRMWARE_CTRL) and 64 bit pointer
> +klog (00083) <10/02/14> ADV : (X_FIRMWARE_CTRL) pointer to the FACS
> +klog (00084) <10/02/14> ADV : table. Section 5.2.9 of version 4.0a
> +klog (00085) <10/02/14> ADV : of the ACPI specification states that
> +klog (00086) <10/02/14> ADV : X_FIRMWARE_CTRL should be zero if
> +klog (00087) <10/02/14> ADV : FIRMWARE_CTRL is defined, or
> +klog (00088) <10/02/14> ADV : FIRMWARE_CTRL should be zero if
> +klog (00089) <10/02/14> ADV : X_FIRMWARE_CTRL is zero. With two
> +klog (00090) <10/02/14> ADV : different pointers defined, the kernel
> +klog (00091) <10/02/14> ADV : has to make a choice, and opts for the
> +klog (00092) <10/02/14> ADV : 32 bit pointer. Because these pointers
> +klog (00093) <10/02/14> ADV : are different, it suggests either one
> +klog (00094) <10/02/14> ADV : of them is incorrect, or different 32
> +klog (00095) <10/02/14> ADV : bit and 64 bit FACS tables are present
> +klog (00096) <10/02/14> ADV : in your system, which is NOT complaint
> +klog (00097) <10/02/14> ADV : with the ACPI specification. The
> +klog (00098) <10/02/14> ADV : kernel has to make a choice and opts
> +klog (00099) <10/02/14> ADV : for the 32 bit FIRMWARE_CTRL.
> +klog (00100) <10/02/14> NLN :
> +klog (00101) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00102) <10/02/14> FAL H: KlogAcpi32Bit64BitAddressMismatchInFadt
> +klog (00103) <10/02/14> FAL H: : Test 1, HIGH Kernel message: [
> +klog (00104) <10/02/14> FAL H: 0.000000] ACPI Warning: 32/64X FACS
> +klog (00105) <10/02/14> FAL H: address mismatch in FADT - DEF2DF40
> +klog (00106) <10/02/14> FAL H: /00000000DEF30D40, using 32 (20090903
> +klog (00107) <10/02/14> FAL H: /tbfadt-486)
> +klog (00108) <10/02/14> NLN :
> +klog (00109) <10/02/14> ADV : ADVICE: The FADT table contains
> +klog (00110) <10/02/14> ADV : Generic Address Structure that has a
> +klog (00111) <10/02/14> ADV : mismatch between the 32 bit and 64 bit
> +klog (00112) <10/02/14> ADV : versions of an address. This should be
> +klog (00113) <10/02/14> ADV : fixed so there are no mismatches.
> +klog (00114) <10/02/14> NLN :
> +klog (00115) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00116) <10/02/14> FAL H: KlogAcpi32Bit64BitAddressMismatchInFadt
> +klog (00117) <10/02/14> FAL H: : Test 1, HIGH Kernel message: [
> +klog (00118) <10/02/14> FAL H: 0.000000] ACPI Warning: 32/64X length
> +klog (00119) <10/02/14> FAL H: mismatch in Gpe1Block: 0/32 20090521
> +klog (00120) <10/02/14> FAL H: tbfadt-527
> +klog (00121) <10/02/14> NLN :
> +klog (00122) <10/02/14> ADV : ADVICE: The FADT table contains
> +klog (00123) <10/02/14> ADV : Generic Address Structure that has a
> +klog (00124) <10/02/14> ADV : mismatch between the 32 bit and 64 bit
> +klog (00125) <10/02/14> ADV : versions of an address. This should be
> +klog (00126) <10/02/14> ADV : fixed so there are no mismatches.
> +klog (00127) <10/02/14> NLN :
> +klog (00128) <10/02/14> FAL H: FAILED [HIGH] KlogAcpiBadAmlCode: Test
> +klog (00129) <10/02/14> FAL H: 1, HIGH Kernel message: [ 0.000000]
> +klog (00130) <10/02/14> FAL H: ACPI Warning: BIOS XSDT has NULL entry
> +klog (00131) <10/02/14> FAL H: , using RSDT (20110112/tbutils-663)
> +klog (00132) <10/02/14> NLN :
> +klog (00133) <10/02/14> ADV : ADVICE: ACPI AML intepreter has found
> +klog (00134) <10/02/14> ADV : some non-conforming AML code. This
> +klog (00135) <10/02/14> ADV : should be investigated and fixed.
> +klog (00136) <10/02/14> NLN :
> +klog (00137) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00138) <10/02/14> FAL H: KlogAcpiFadtInvalidLength: Test 1,
> +klog (00139) <10/02/14> FAL H: HIGH Kernel message: [ 0.000000] ACPI
> +klog (00140) <10/02/14> FAL H: Warning: Invalid length for
> +klog (00141) <10/02/14> FAL H: Pm1aControlBlock: 32, using default 16
> +klog (00142) <10/02/14> FAL H: (20090903/tbfadt-607)
> +klog (00143) <10/02/14> NLN :
> +klog (00144) <10/02/14> ADV : ADVICE: This item in the FADT is the
> +klog (00145) <10/02/14> ADV : incorrect length. Should be corrected.
> +klog (00146) <10/02/14> NLN :
> +klog (00147) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00148) <10/02/14> FAL H: KlogAcpiOptionalFieldZeroAddressOrLength
> +klog (00149) <10/02/14> FAL H: : Test 1, HIGH Kernel message: [
> +klog (00150) <10/02/14> FAL H: 0.000000] ACPI Warning: Optional field
> +klog (00151) <10/02/14> FAL H: Gpe1Block has zero address or length:
> +klog (00152) <10/02/14> FAL H: 000000000000102C/0 20090521 tbfadt-558
> +klog (00153) <10/02/14> NLN :
> +klog (00154) <10/02/14> ADV : ADVICE: An ACPI table contains Generic
> +klog (00155) <10/02/14> ADV : Address Structure that has an address
> +klog (00156) <10/02/14> ADV : that is incorrectly set to zero, or a
> +klog (00157) <10/02/14> ADV : zero length. This needs to be fixed.
> +klog (00158) <10/02/14> NLN :
> +klog (00159) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00160) <10/02/14> FAL H: KlogAcpiOptionalFieldZeroAddressOrLength
> +klog (00161) <10/02/14> FAL H: : Test 1, HIGH Kernel message: [
> +klog (00162) <10/02/14> FAL H: 0.000000] ACPI Warning: Optional field
> +klog (00163) <10/02/14> FAL H: Pm2ControlBlock has zero address or
> +klog (00164) <10/02/14> FAL H: length: 0000000000000000/1 20090521
> +klog (00165) <10/02/14> FAL H: tbfadt-558
> +klog (00166) <10/02/14> NLN :
> +klog (00167) <10/02/14> ADV : ADVICE: An ACPI table contains Generic
> +klog (00168) <10/02/14> ADV : Address Structure that has an address
> +klog (00169) <10/02/14> ADV : that is incorrectly set to zero, or a
> +klog (00170) <10/02/14> ADV : zero length. This needs to be fixed.
> +klog (00171) <10/02/14> NLN :
> +klog (00172) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00173) <10/02/14> FAL H: KlogAcpiOptionalFieldZeroAddressOrLength
> +klog (00174) <10/02/14> FAL H: : Test 1, HIGH Kernel message: [
> +klog (00175) <10/02/14> FAL H: 0.000000] ACPI Warning (tbfadt-0460):
> +klog (00176) <10/02/14> FAL H: Optional field "Gpe1Block" has zero
> +klog (00177) <10/02/14> FAL H: address or length: 000000000000102C/0
> +klog (00178) <10/02/14> FAL H: [20080926]
> +klog (00179) <10/02/14> NLN :
> +klog (00180) <10/02/14> ADV : ADVICE: An ACPI table contains Generic
> +klog (00181) <10/02/14> ADV : Address Structure that has an address
> +klog (00182) <10/02/14> ADV : that is incorrectly set to zero, or a
> +klog (00183) <10/02/14> ADV : zero length. This needs to be fixed.
> +klog (00184) <10/02/14> NLN :
> +klog (00185) <10/02/14> FAL M: FAILED [MEDIUM]
> +klog (00186) <10/02/14> FAL M: KlogBiosMtrrIncorrectMask: Test 1,
> +klog (00187) <10/02/14> FAL M: MEDIUM Kernel message: [ 0.000000]
> +klog (00188) <10/02/14> FAL M: mtrr: your BIOS has configured an
> +klog (00189) <10/02/14> FAL M: incorrect mask, fixing it.
> +klog (00190) <10/02/14> NLN :
> +klog (00191) <10/02/14> ADV : ADVICE: The Memory Type Range
> +klog (00192) <10/02/14> ADV : Registers (MTRRs) which define memory
> +klog (00193) <10/02/14> ADV : caching policy are misconfigued by the
> +klog (00194) <10/02/14> ADV : BIOS. In this case, the mask is
> +klog (00195) <10/02/14> ADV : incorrectly set and the kernel has
> +klog (00196) <10/02/14> ADV : detected this and worked around the
> +klog (00197) <10/02/14> ADV : firmware bug.
> +klog (00198) <10/02/14> NLN :
> +klog (00199) <10/02/14> FAL C: FAILED [CRITICAL]
> +klog (00200) <10/02/14> FAL C: KlogBiosCpuMtrrMisconfigured: Test 1,
> +klog (00201) <10/02/14> FAL C: CRITICAL Kernel message: [ 0.000000]
> +klog (00202) <10/02/14> FAL C: WARNING: BIOS bug: CPU MTRRs don't
> +klog (00203) <10/02/14> FAL C: cover all of memory, losing 1408MB of
> +klog (00204) <10/02/14> FAL C: RAM.
> +klog (00205) <10/02/14> NLN :
> +klog (00206) <10/02/14> ADV : ADVICE: The Memory Type Range
> +klog (00207) <10/02/14> ADV : Registers (MTRRs) which define memory
> +klog (00208) <10/02/14> ADV : caching policy are misconfigued by the
> +klog (00209) <10/02/14> ADV : BIOS and don't appear to cover all
> +klog (00210) <10/02/14> ADV : available physical memory. The kernel
> +klog (00211) <10/02/14> ADV : has detected this and has reduced the
> +klog (00212) <10/02/14> ADV : amount of memory available to be safe.
> +klog (00213) <10/02/14> ADV : Either check that the BIOS memory
> +klog (00214) <10/02/14> ADV : caching options are set correctly or
> +klog (00215) <10/02/14> ADV : contact your BIOS vendor to get this
> +klog (00216) <10/02/14> ADV : fixed.
> +klog (00217) <10/02/14> NLN :
> +klog (00218) <10/02/14> FAL H: FAILED [HIGH] KlogAcpiUnknownAmlOpcode
> +klog (00219) <10/02/14> FAL H: : Test 1, HIGH Kernel message: [
> +klog (00220) <10/02/14> FAL H: 0.022719] ACPI Error: Found unknown
> +klog (00221) <10/02/14> FAL H: opcode 0xFD at AML address f7ffe14c
> +klog (00222) <10/02/14> FAL H: offset 0xE8, ignoring (20110112
> +klog (00223) <10/02/14> FAL H: /psloop-141)
> +klog (00224) <10/02/14> NLN :
> +klog (00225) <10/02/14> ADV : ADVICE: ACPI execution run time error:
> +klog (00226) <10/02/14> ADV : The ACPI interpreter has reached an
> +klog (00227) <10/02/14> ADV : opcode that is unknown, this normally
> +klog (00228) <10/02/14> ADV : is a bug in the underlying AML code
> +klog (00229) <10/02/14> ADV : either because of badly written AML
> +klog (00230) <10/02/14> ADV : code or the compiler has produced code
> +klog (00231) <10/02/14> ADV : that is incorrect or the ACPI
> +klog (00232) <10/02/14> ADV : interpreter does not support this
> +klog (00233) <10/02/14> ADV : valid opcode.
> +klog (00234) <10/02/14> NLN :
> +klog (00235) <10/02/14> FAL C: FAILED [CRITICAL]
> +klog (00236) <10/02/14> FAL C: KlogAcpiDetectedUnsupportedOpCode:
> +klog (00237) <10/02/14> FAL C: Test 1, CRITICAL Kernel message: [
> +klog (00238) <10/02/14> FAL C: 0.025463] ACPI Warning: Detected an
> +klog (00239) <10/02/14> FAL C: unsupported executable opcode at
> +klog (00240) <10/02/14> FAL C: module-level: [0x007B] at table offset
> +klog (00241) <10/02/14> FAL C: 0x00C3 (20110112/psloop-526)
> +klog (00242) <10/02/14> NLN :
> +klog (00243) <10/02/14> ADV : ADVICE: An illegal AML opcode has been
> +klog (00244) <10/02/14> ADV : found and is ignored. This indicates
> +klog (00245) <10/02/14> ADV : either badly compiled code or opcode
> +klog (00246) <10/02/14> ADV : corruption in the DSDT or SSDT tables
> +klog (00247) <10/02/14> ADV : or a bug in the ACPI execution engine.
> +klog (00248) <10/02/14> ADV : Recommend disassembing using iasl to
> +klog (00249) <10/02/14> ADV : find any offending code.
> +klog (00250) <10/02/14> NLN :
> +klog (00251) <10/02/14> FAL H: FAILED [HIGH]
> +klog (00252) <10/02/14> FAL H: KlogAcpiObjectAlreadyExists: Test 1,
> +klog (00253) <10/02/14> FAL H: HIGH Kernel message: [ 0.034090] ACPI
> +klog (00254) <10/02/14> FAL H: Error: Method parse/execution failed
> +klog (00255) <10/02/14> FAL H: [_SB_.PCI0._OSC] (Node ee025630),
> +klog (00256) <10/02/14> FAL H: AE_ALREADY_EXISTS (20110112
> +klog (00257) <10/02/14> FAL H: /psparse-536)
> +klog (00258) <10/02/14> NLN :
> +klog (00259) <10/02/14> ADV : ADVICE: This is a bug picked up by the
> +klog (00260) <10/02/14> ADV : kernel, but as yet, the firmware test
> +klog (00261) <10/02/14> ADV : suite has no diagnostic advice for
> +klog (00262) <10/02/14> ADV : this particular problem.
> +klog (00263) <10/02/14> NLN :
> +klog (00264) <10/02/14> FAL H: FAILED [HIGH] KlogAcpiFirmwareError:
> +klog (00265) <10/02/14> FAL H: Test 1, HIGH Kernel message: [
> +klog (00266) <10/02/14> FAL H: 0.040119] [Firmware Bug]: the BIOS has
> +klog (00267) <10/02/14> FAL H: corrupted hw-PMU resources (MSR 186 is
> +klog (00268) <10/02/14> FAL H: 400000)
> +klog (00269) <10/02/14> NLN :
> +klog (00270) <10/02/14> ADV : ADVICE: The kernel has detected a
> +klog (00271) <10/02/14> ADV : Firmware bug in the BIOS or ACPI which
> +klog (00272) <10/02/14> ADV : needs investigating and fixing.
> +klog (00273) <10/02/14> NLN :
> +klog (00274) <10/02/14> FAL C: FAILED [CRITICAL]
> +klog (00275) <10/02/14> FAL C: KlogAcpiDetectedUnsupportedOpCode:
> +klog (00276) <10/02/14> FAL C: Test 1, CRITICAL Kernel message: [
> +klog (00277) <10/02/14> FAL C: 0.042222] ACPI Warning: Detected an
> +klog (00278) <10/02/14> FAL C: unsupported executable opcode at
> +klog (00279) <10/02/14> FAL C: module-level: [0x0070] at table offset
> +klog (00280) <10/02/14> FAL C: 0x2366 (20100121/psloop-526)
> +klog (00281) <10/02/14> NLN :
> +klog (00282) <10/02/14> ADV : ADVICE: An illegal AML opcode has been
> +klog (00283) <10/02/14> ADV : found and is ignored. This indicates
> +klog (00284) <10/02/14> ADV : either badly compiled code or opcode
> +klog (00285) <10/02/14> ADV : corruption in the DSDT or SSDT tables
> +klog (00286) <10/02/14> ADV : or a bug in the ACPI execution engine.
> +klog (00287) <10/02/14> ADV : Recommend disassembing using iasl to
> +klog (00288) <10/02/14> ADV : find any offending code.
> +klog (00289) <10/02/14> NLN :
> +klog (00290) <10/02/14> INF : Found 18 unique errors in kernel log.
> +klog (00291) <10/02/14> NLN :
> +klog (00292) <10/02/14> SEP : ======================================
> +klog (00293) <10/02/14> SUM : 0 passed, 18 failed, 0 warning, 0
> +klog (00294) <10/02/14> SUM : aborted, 0 skipped, 0 info only.
> +klog (00295) <10/02/14> SEP : ======================================
> diff --git a/fwts-test/arg-log-format-0001/klog-0003.log b/fwts-test/arg-log-format-0001/klog-0003.log
> index 13b48c2..3bc32af 100644
> --- a/fwts-test/arg-log-format-0001/klog-0003.log
> +++ b/fwts-test/arg-log-format-0001/klog-0003.log
> @@ -1,197 +1,197 @@
> -klog 00015: klog: Scan kernel log for errors and warnings.
> -klog 00016: ---------------------------------------------------------
> -klog 00017: Test 1 of 1: Kernel log error check.
> -klog 00018: FAILED [HIGH] KlogAcpiMultipleApicMadtFound: Test 1, HIGH
> -klog 00019: Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC
> -klog 00020: /MADT found, using 0
> -klog 00021:
> -klog 00022: ADVICE: The kernel has detected more than one ACPI
> -klog 00023: Multiple APIC Description Table (MADT) (these tables have
> -klog 00024: the "APIC" signature). There should only be one MADT and
> -klog 00025: the kernel will by default select the first one. However,
> -klog 00026: one can override this and select the Nth MADT using
> -klog 00027: acpi_apic_instance=N.
> -klog 00028:
> -klog 00029: FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> -klog 00030: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> -klog 00031: address mismatch in Gpe0Block: 00008018/0000000000008028,
> -klog 00032: using 32 (20090903/tbfadt-427)
> -klog 00033:
> -klog 00034: ADVICE: The FADT table contains a mismatch between a 32
> -klog 00035: bit pointer and a 64 bit Generic Address pointer. Because
> -klog 00036: these pointers are different, it suggests either one of
> -klog 00037: them is incorrect. If a non-null 32 bit pointer exists,
> -klog 00038: then the kernel will opt for this in preference to the 64
> -klog 00039: bit pointer even though this is not in accordance to the
> -klog 00040: ACPI specification.
> -klog 00041:
> -klog 00042: FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
> -klog 00043: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
> -klog 00044: RSDP was not found (20090903/tbxfroot-219)
> -klog 00045:
> -klog 00046: ADVICE: An ACPI compatible system must provide an RSDP
> -klog 00047: (Root System Description Pointer). This structure
> -klog 00048: provides the physical address of the RSDT and XSDT. Since
> -klog 00049: this could not be found, the ACPI driver has had to
> -klog 00050: disable ACPI support.
> -klog 00051:
> -klog 00052: FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel
> -klog 00053: message: [ 0.000000] ACPI Warning: 32/64 FACS address
> -klog 00054: mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
> -klog 00055:
> -klog 00056: ADVICE: The FADT table contains a mismatch between the 32
> -klog 00057: bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> -klog 00058: (X_FIRMWARE_CTRL) pointer to the FACS table. Section
> -klog 00059: 5.2.9 of version 4.0a of the ACPI specification states
> -klog 00060: that X_FIRMWARE_CTRL should be zero if FIRMWARE_CTRL is
> -klog 00061: defined, or FIRMWARE_CTRL should be zero if
> -klog 00062: X_FIRMWARE_CTRL is zero. With two different pointers
> -klog 00063: defined, the kernel has to make a choice, and opts for
> -klog 00064: the 32 bit pointer. Because these pointers are different,
> -klog 00065: it suggests either one of them is incorrect, or different
> -klog 00066: 32 bit and 64 bit FACS tables are present in your system,
> -klog 00067: which is NOT complaint with the ACPI specification. The
> -klog 00068: kernel has to make a choice and opts for the 32 bit
> -klog 00069: FIRMWARE_CTRL.
> -klog 00070:
> -klog 00071: FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> -klog 00072: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> -klog 00073: /64X FACS address mismatch in FADT - DEF2DF40
> -klog 00074: /00000000DEF30D40, using 32 (20090903/tbfadt-486)
> -klog 00075:
> -klog 00076: ADVICE: The FADT table contains Generic Address Structure
> -klog 00077: that has a mismatch between the 32 bit and 64 bit
> -klog 00078: versions of an address. This should be fixed so there are
> -klog 00079: no mismatches.
> -klog 00080:
> -klog 00081: FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> -klog 00082: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> -klog 00083: /64X length mismatch in Gpe1Block: 0/32 20090521
> -klog 00084: tbfadt-527
> -klog 00085:
> -klog 00086: ADVICE: The FADT table contains Generic Address Structure
> -klog 00087: that has a mismatch between the 32 bit and 64 bit
> -klog 00088: versions of an address. This should be fixed so there are
> -klog 00089: no mismatches.
> -klog 00090:
> -klog 00091: FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> -klog 00092: message: [ 0.000000] ACPI Warning: BIOS XSDT has NULL
> -klog 00093: entry, using RSDT (20110112/tbutils-663)
> -klog 00094:
> -klog 00095: ADVICE: ACPI AML intepreter has found some non-conforming
> -klog 00096: AML code. This should be investigated and fixed.
> -klog 00097:
> -klog 00098: FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> -klog 00099: Kernel message: [ 0.000000] ACPI Warning: Invalid length
> -klog 00100: for Pm1aControlBlock: 32, using default 16 (20090903
> -klog 00101: /tbfadt-607)
> -klog 00102:
> -klog 00103: ADVICE: This item in the FADT is the incorrect length.
> -klog 00104: Should be corrected.
> -klog 00105:
> -klog 00106: FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> -klog 00107: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> -klog 00108: Optional field Gpe1Block has zero address or length:
> -klog 00109: 000000000000102C/0 20090521 tbfadt-558
> -klog 00110:
> -klog 00111: ADVICE: An ACPI table contains Generic Address Structure
> -klog 00112: that has an address that is incorrectly set to zero, or a
> -klog 00113: zero length. This needs to be fixed.
> -klog 00114:
> -klog 00115: FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> -klog 00116: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> -klog 00117: Optional field Pm2ControlBlock has zero address or length
> -klog 00118: : 0000000000000000/1 20090521 tbfadt-558
> -klog 00119:
> -klog 00120: ADVICE: An ACPI table contains Generic Address Structure
> -klog 00121: that has an address that is incorrectly set to zero, or a
> -klog 00122: zero length. This needs to be fixed.
> -klog 00123:
> -klog 00124: FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> -klog 00125: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning
> -klog 00126: (tbfadt-0460): Optional field "Gpe1Block" has zero
> -klog 00127: address or length: 000000000000102C/0 [20080926]
> -klog 00128:
> -klog 00129: ADVICE: An ACPI table contains Generic Address Structure
> -klog 00130: that has an address that is incorrectly set to zero, or a
> -klog 00131: zero length. This needs to be fixed.
> -klog 00132:
> -klog 00133: FAILED [MEDIUM] KlogBiosMtrrIncorrectMask: Test 1, MEDIUM
> -klog 00134: Kernel message: [ 0.000000] mtrr: your BIOS has
> -klog 00135: configured an incorrect mask, fixing it.
> -klog 00136:
> -klog 00137: ADVICE: The Memory Type Range Registers (MTRRs) which
> -klog 00138: define memory caching policy are misconfigued by the
> -klog 00139: BIOS. In this case, the mask is incorrectly set and the
> -klog 00140: kernel has detected this and worked around the firmware
> -klog 00141: bug.
> -klog 00142:
> -klog 00143: FAILED [CRITICAL] KlogBiosCpuMtrrMisconfigured: Test 1,
> -klog 00144: CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug:
> -klog 00145: CPU MTRRs don't cover all of memory, losing 1408MB of
> -klog 00146: RAM.
> -klog 00147:
> -klog 00148: ADVICE: The Memory Type Range Registers (MTRRs) which
> -klog 00149: define memory caching policy are misconfigued by the BIOS
> -klog 00150: and don't appear to cover all available physical memory.
> -klog 00151: The kernel has detected this and has reduced the amount
> -klog 00152: of memory available to be safe. Either check that the
> -klog 00153: BIOS memory caching options are set correctly or contact
> -klog 00154: your BIOS vendor to get this fixed.
> -klog 00155:
> -klog 00156: FAILED [HIGH] KlogAcpiUnknownAmlOpcode: Test 1, HIGH
> -klog 00157: Kernel message: [ 0.022719] ACPI Error: Found unknown
> -klog 00158: opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring
> -klog 00159: (20110112/psloop-141)
> -klog 00160:
> -klog 00161: ADVICE: ACPI execution run time error: The ACPI
> -klog 00162: interpreter has reached an opcode that is unknown, this
> -klog 00163: normally is a bug in the underlying AML code either
> -klog 00164: because of badly written AML code or the compiler has
> -klog 00165: produced code that is incorrect or the ACPI interpreter
> -klog 00166: does not support this valid opcode.
> -klog 00167:
> -klog 00168: FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> -klog 00169: 1, CRITICAL Kernel message: [ 0.025463] ACPI Warning:
> -klog 00170: Detected an unsupported executable opcode at module-level
> -klog 00171: : [0x007B] at table offset 0x00C3 (20110112/psloop-526)
> -klog 00172:
> -klog 00173: ADVICE: An illegal AML opcode has been found and is
> -klog 00174: ignored. This indicates either badly compiled code or
> -klog 00175: opcode corruption in the DSDT or SSDT tables or a bug in
> -klog 00176: the ACPI execution engine. Recommend disassembing using
> -klog 00177: iasl to find any offending code.
> -klog 00178:
> -klog 00179: FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> -klog 00180: Kernel message: [ 0.034090] ACPI Error: Method parse
> -klog 00181: /execution failed [_SB_.PCI0._OSC] (Node ee025630),
> -klog 00182: AE_ALREADY_EXISTS (20110112/psparse-536)
> -klog 00183:
> -klog 00184: ADVICE: This is a bug picked up by the kernel, but as yet
> -klog 00185: , the firmware test suite has no diagnostic advice for
> -klog 00186: this particular problem.
> -klog 00187:
> -klog 00188: FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> -klog 00189: message: [ 0.040119] [Firmware Bug]: the BIOS has
> -klog 00190: corrupted hw-PMU resources (MSR 186 is 400000)
> -klog 00191:
> -klog 00192: ADVICE: The kernel has detected a Firmware bug in the
> -klog 00193: BIOS or ACPI which needs investigating and fixing.
> -klog 00194:
> -klog 00195: FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> -klog 00196: 1, CRITICAL Kernel message: [ 0.042222] ACPI Warning:
> -klog 00197: Detected an unsupported executable opcode at module-level
> -klog 00198: : [0x0070] at table offset 0x2366 (20100121/psloop-526)
> -klog 00199:
> -klog 00200: ADVICE: An illegal AML opcode has been found and is
> -klog 00201: ignored. This indicates either badly compiled code or
> -klog 00202: opcode corruption in the DSDT or SSDT tables or a bug in
> -klog 00203: the ACPI execution engine. Recommend disassembing using
> -klog 00204: iasl to find any offending code.
> -klog 00205:
> -klog 00206: Found 18 unique errors in kernel log.
> -klog 00207:
> -klog 00208: =========================================================
> -klog 00209: 0 passed, 18 failed, 0 warning, 0 aborted, 0 skipped, 0
> -klog 00210: info only.
> -klog 00211: =========================================================
> +klog 00016: klog: Scan kernel log for errors and warnings.
> +klog 00017: ---------------------------------------------------------
> +klog 00018: Test 1 of 1: Kernel log error check.
> +klog 00019: FAILED [HIGH] KlogAcpiMultipleApicMadtFound: Test 1, HIGH
> +klog 00020: Kernel message: [ 0.000000] ACPI: BIOS bug: multiple APIC
> +klog 00021: /MADT found, using 0
> +klog 00022:
> +klog 00023: ADVICE: The kernel has detected more than one ACPI
> +klog 00024: Multiple APIC Description Table (MADT) (these tables have
> +klog 00025: the "APIC" signature). There should only be one MADT and
> +klog 00026: the kernel will by default select the first one. However,
> +klog 00027: one can override this and select the Nth MADT using
> +klog 00028: acpi_apic_instance=N.
> +klog 00029:
> +klog 00030: FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatch: Test 1,
> +klog 00031: HIGH Kernel message: [ 0.000000] ACPI Error: 32/64X
> +klog 00032: address mismatch in Gpe0Block: 00008018/0000000000008028,
> +klog 00033: using 32 (20090903/tbfadt-427)
> +klog 00034:
> +klog 00035: ADVICE: The FADT table contains a mismatch between a 32
> +klog 00036: bit pointer and a 64 bit Generic Address pointer. Because
> +klog 00037: these pointers are different, it suggests either one of
> +klog 00038: them is incorrect. If a non-null 32 bit pointer exists,
> +klog 00039: then the kernel will opt for this in preference to the 64
> +klog 00040: bit pointer even though this is not in accordance to the
> +klog 00041: ACPI specification.
> +klog 00042:
> +klog 00043: FAILED [CRITICAL] KlogAcpiValidRsdpNotFound: Test 1,
> +klog 00044: CRITICAL Kernel message: [ 0.000000] ACPI Error: A valid
> +klog 00045: RSDP was not found (20090903/tbxfroot-219)
> +klog 00046:
> +klog 00047: ADVICE: An ACPI compatible system must provide an RSDP
> +klog 00048: (Root System Description Pointer). This structure
> +klog 00049: provides the physical address of the RSDT and XSDT. Since
> +klog 00050: this could not be found, the ACPI driver has had to
> +klog 00051: disable ACPI support.
> +klog 00052:
> +klog 00053: FAILED [HIGH] KlogAcpiTwoFacs: Test 1, HIGH Kernel
> +klog 00054: message: [ 0.000000] ACPI Warning: 32/64 FACS address
> +klog 00055: mismatch in FADT - two FACS tables! (20090903/tbfadt-369)
> +klog 00056:
> +klog 00057: ADVICE: The FADT table contains a mismatch between the 32
> +klog 00058: bit pointer (FIRMWARE_CTRL) and 64 bit pointer
> +klog 00059: (X_FIRMWARE_CTRL) pointer to the FACS table. Section
> +klog 00060: 5.2.9 of version 4.0a of the ACPI specification states
> +klog 00061: that X_FIRMWARE_CTRL should be zero if FIRMWARE_CTRL is
> +klog 00062: defined, or FIRMWARE_CTRL should be zero if
> +klog 00063: X_FIRMWARE_CTRL is zero. With two different pointers
> +klog 00064: defined, the kernel has to make a choice, and opts for
> +klog 00065: the 32 bit pointer. Because these pointers are different,
> +klog 00066: it suggests either one of them is incorrect, or different
> +klog 00067: 32 bit and 64 bit FACS tables are present in your system,
> +klog 00068: which is NOT complaint with the ACPI specification. The
> +klog 00069: kernel has to make a choice and opts for the 32 bit
> +klog 00070: FIRMWARE_CTRL.
> +klog 00071:
> +klog 00072: FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog 00073: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog 00074: /64X FACS address mismatch in FADT - DEF2DF40
> +klog 00075: /00000000DEF30D40, using 32 (20090903/tbfadt-486)
> +klog 00076:
> +klog 00077: ADVICE: The FADT table contains Generic Address Structure
> +klog 00078: that has a mismatch between the 32 bit and 64 bit
> +klog 00079: versions of an address. This should be fixed so there are
> +klog 00080: no mismatches.
> +klog 00081:
> +klog 00082: FAILED [HIGH] KlogAcpi32Bit64BitAddressMismatchInFadt:
> +klog 00083: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning: 32
> +klog 00084: /64X length mismatch in Gpe1Block: 0/32 20090521
> +klog 00085: tbfadt-527
> +klog 00086:
> +klog 00087: ADVICE: The FADT table contains Generic Address Structure
> +klog 00088: that has a mismatch between the 32 bit and 64 bit
> +klog 00089: versions of an address. This should be fixed so there are
> +klog 00090: no mismatches.
> +klog 00091:
> +klog 00092: FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
> +klog 00093: message: [ 0.000000] ACPI Warning: BIOS XSDT has NULL
> +klog 00094: entry, using RSDT (20110112/tbutils-663)
> +klog 00095:
> +klog 00096: ADVICE: ACPI AML intepreter has found some non-conforming
> +klog 00097: AML code. This should be investigated and fixed.
> +klog 00098:
> +klog 00099: FAILED [HIGH] KlogAcpiFadtInvalidLength: Test 1, HIGH
> +klog 00100: Kernel message: [ 0.000000] ACPI Warning: Invalid length
> +klog 00101: for Pm1aControlBlock: 32, using default 16 (20090903
> +klog 00102: /tbfadt-607)
> +klog 00103:
> +klog 00104: ADVICE: This item in the FADT is the incorrect length.
> +klog 00105: Should be corrected.
> +klog 00106:
> +klog 00107: FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog 00108: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog 00109: Optional field Gpe1Block has zero address or length:
> +klog 00110: 000000000000102C/0 20090521 tbfadt-558
> +klog 00111:
> +klog 00112: ADVICE: An ACPI table contains Generic Address Structure
> +klog 00113: that has an address that is incorrectly set to zero, or a
> +klog 00114: zero length. This needs to be fixed.
> +klog 00115:
> +klog 00116: FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog 00117: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning:
> +klog 00118: Optional field Pm2ControlBlock has zero address or length
> +klog 00119: : 0000000000000000/1 20090521 tbfadt-558
> +klog 00120:
> +klog 00121: ADVICE: An ACPI table contains Generic Address Structure
> +klog 00122: that has an address that is incorrectly set to zero, or a
> +klog 00123: zero length. This needs to be fixed.
> +klog 00124:
> +klog 00125: FAILED [HIGH] KlogAcpiOptionalFieldZeroAddressOrLength:
> +klog 00126: Test 1, HIGH Kernel message: [ 0.000000] ACPI Warning
> +klog 00127: (tbfadt-0460): Optional field "Gpe1Block" has zero
> +klog 00128: address or length: 000000000000102C/0 [20080926]
> +klog 00129:
> +klog 00130: ADVICE: An ACPI table contains Generic Address Structure
> +klog 00131: that has an address that is incorrectly set to zero, or a
> +klog 00132: zero length. This needs to be fixed.
> +klog 00133:
> +klog 00134: FAILED [MEDIUM] KlogBiosMtrrIncorrectMask: Test 1, MEDIUM
> +klog 00135: Kernel message: [ 0.000000] mtrr: your BIOS has
> +klog 00136: configured an incorrect mask, fixing it.
> +klog 00137:
> +klog 00138: ADVICE: The Memory Type Range Registers (MTRRs) which
> +klog 00139: define memory caching policy are misconfigued by the
> +klog 00140: BIOS. In this case, the mask is incorrectly set and the
> +klog 00141: kernel has detected this and worked around the firmware
> +klog 00142: bug.
> +klog 00143:
> +klog 00144: FAILED [CRITICAL] KlogBiosCpuMtrrMisconfigured: Test 1,
> +klog 00145: CRITICAL Kernel message: [ 0.000000] WARNING: BIOS bug:
> +klog 00146: CPU MTRRs don't cover all of memory, losing 1408MB of
> +klog 00147: RAM.
> +klog 00148:
> +klog 00149: ADVICE: The Memory Type Range Registers (MTRRs) which
> +klog 00150: define memory caching policy are misconfigued by the BIOS
> +klog 00151: and don't appear to cover all available physical memory.
> +klog 00152: The kernel has detected this and has reduced the amount
> +klog 00153: of memory available to be safe. Either check that the
> +klog 00154: BIOS memory caching options are set correctly or contact
> +klog 00155: your BIOS vendor to get this fixed.
> +klog 00156:
> +klog 00157: FAILED [HIGH] KlogAcpiUnknownAmlOpcode: Test 1, HIGH
> +klog 00158: Kernel message: [ 0.022719] ACPI Error: Found unknown
> +klog 00159: opcode 0xFD at AML address f7ffe14c offset 0xE8, ignoring
> +klog 00160: (20110112/psloop-141)
> +klog 00161:
> +klog 00162: ADVICE: ACPI execution run time error: The ACPI
> +klog 00163: interpreter has reached an opcode that is unknown, this
> +klog 00164: normally is a bug in the underlying AML code either
> +klog 00165: because of badly written AML code or the compiler has
> +klog 00166: produced code that is incorrect or the ACPI interpreter
> +klog 00167: does not support this valid opcode.
> +klog 00168:
> +klog 00169: FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 00170: 1, CRITICAL Kernel message: [ 0.025463] ACPI Warning:
> +klog 00171: Detected an unsupported executable opcode at module-level
> +klog 00172: : [0x007B] at table offset 0x00C3 (20110112/psloop-526)
> +klog 00173:
> +klog 00174: ADVICE: An illegal AML opcode has been found and is
> +klog 00175: ignored. This indicates either badly compiled code or
> +klog 00176: opcode corruption in the DSDT or SSDT tables or a bug in
> +klog 00177: the ACPI execution engine. Recommend disassembing using
> +klog 00178: iasl to find any offending code.
> +klog 00179:
> +klog 00180: FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
> +klog 00181: Kernel message: [ 0.034090] ACPI Error: Method parse
> +klog 00182: /execution failed [_SB_.PCI0._OSC] (Node ee025630),
> +klog 00183: AE_ALREADY_EXISTS (20110112/psparse-536)
> +klog 00184:
> +klog 00185: ADVICE: This is a bug picked up by the kernel, but as yet
> +klog 00186: , the firmware test suite has no diagnostic advice for
> +klog 00187: this particular problem.
> +klog 00188:
> +klog 00189: FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
> +klog 00190: message: [ 0.040119] [Firmware Bug]: the BIOS has
> +klog 00191: corrupted hw-PMU resources (MSR 186 is 400000)
> +klog 00192:
> +klog 00193: ADVICE: The kernel has detected a Firmware bug in the
> +klog 00194: BIOS or ACPI which needs investigating and fixing.
> +klog 00195:
> +klog 00196: FAILED [CRITICAL] KlogAcpiDetectedUnsupportedOpCode: Test
> +klog 00197: 1, CRITICAL Kernel message: [ 0.042222] ACPI Warning:
> +klog 00198: Detected an unsupported executable opcode at module-level
> +klog 00199: : [0x0070] at table offset 0x2366 (20100121/psloop-526)
> +klog 00200:
> +klog 00201: ADVICE: An illegal AML opcode has been found and is
> +klog 00202: ignored. This indicates either badly compiled code or
> +klog 00203: opcode corruption in the DSDT or SSDT tables or a bug in
> +klog 00204: the ACPI execution engine. Recommend disassembing using
> +klog 00205: iasl to find any offending code.
> +klog 00206:
> +klog 00207: Found 18 unique errors in kernel log.
> +klog 00208:
> +klog 00209: =========================================================
> +klog 00210: 0 passed, 18 failed, 0 warning, 0 aborted, 0 skipped, 0
> +klog 00211: info only.
> +klog 00212: =========================================================
> diff --git a/fwts-test/arg-log-format-0001/test-0001.sh b/fwts-test/arg-log-format-0001/test-0001.sh
> index ac536c4..d89c7b9 100755
> --- a/fwts-test/arg-log-format-0001/test-0001.sh
> +++ b/fwts-test/arg-log-format-0001/test-0001.sh
> @@ -6,11 +6,11 @@ TMPLOG=$TMP/klog.log.$$
> TMPLOG_ORIG=$TMP/klog-0001.log.$$
> TODAY=`date +%d/%m/%y`
>
> -$FWTS -w 80 --klog=klog.txt --log-format="%owner (%line) <%date> %field %level: " klog - | grep "^klog" > $TMPLOG
> +$FWTS -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-log-format-0001/klog.txt --log-format="%owner (%line) <%date> %field %level: " klog - | grep "^klog" > $TMPLOG
> #
> # Need to adjust reference log to today's date
> #
> -sed sx16\/05\/12x${TODAY}x < klog-0001.log > $TMPLOG_ORIG
> +sed sx10\/02\/14x${TODAY}x < $FWTSTESTDIR/arg-log-format-0001/klog-0001.log > $TMPLOG_ORIG
> diff $TMPLOG $TMPLOG_ORIG >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> diff --git a/fwts-test/arg-log-format-0001/test-0002.sh b/fwts-test/arg-log-format-0001/test-0002.sh
> index 99f2e87..92c431d 100755
> --- a/fwts-test/arg-log-format-0001/test-0002.sh
> +++ b/fwts-test/arg-log-format-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test --log-format, %owner field"
> NAME=test-0002.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS -w 80 --klog=klog.txt --log-format="%owner: " klog - | grep "^klog" > $TMPLOG
> -diff $TMPLOG klog-0002.log >> $FAILURE_LOG
> +$FWTS -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-log-format-0001/klog.txt --log-format="%owner: " klog - | grep "^klog" > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-log-format-0001/klog-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-log-format-0001/test-0003.sh b/fwts-test/arg-log-format-0001/test-0003.sh
> index 5aa6825..1589325 100755
> --- a/fwts-test/arg-log-format-0001/test-0003.sh
> +++ b/fwts-test/arg-log-format-0001/test-0003.sh
> @@ -5,8 +5,8 @@ NAME=test-0003.sh
> TMPLOG=$TMP/klog.log.$$
> TODAY=`date +%d/%m/%y`
>
> -$FWTS -w 80 --klog=klog.txt --log-format="%owner %line: " klog - | grep "^klog" | sed sx12\/10\/11x${TODAY}x > $TMPLOG
> -diff $TMPLOG klog-0003.log >> $FAILURE_LOG
> +$FWTS -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-log-format-0001/klog.txt --log-format="%owner %line: " klog - | grep "^klog" | sed sx12\/10\/11x${TODAY}x > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-log-format-0001/klog-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-log-format-0001/test-0004.sh b/fwts-test/arg-log-format-0001/test-0004.sh
> index 23e7d2e..bebf252 100755
> --- a/fwts-test/arg-log-format-0001/test-0004.sh
> +++ b/fwts-test/arg-log-format-0001/test-0004.sh
> @@ -10,8 +10,8 @@ TODAY=`date +%d/%m/%y`
> #
> # Need to adjust reference log to today's date
> #
> -$FWTS -w 80 --klog=klog.txt --log-format="%owner %date %%level: " klog - | grep "^klog" > $TMPLOG
> -sed sx10\/10\/11x${TODAY}x < klog-0004.log > $TMPLOG_ORIG
> +$FWTS -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-log-format-0001/klog.txt --log-format="%owner %date %%level: " klog - | grep "^klog" > $TMPLOG
> +sed sx10\/10\/11x${TODAY}x < $FWTSTESTDIR/arg-log-format-0001/klog-0004.log > $TMPLOG_ORIG
> diff $TMPLOG $TMPLOG_ORIG >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> diff --git a/fwts-test/arg-quiet-0001/test-0001.sh b/fwts-test/arg-quiet-0001/test-0001.sh
> index 270be2e..5a449d6 100755
> --- a/fwts-test/arg-quiet-0001/test-0001.sh
> +++ b/fwts-test/arg-quiet-0001/test-0001.sh
> @@ -4,7 +4,7 @@ TEST="Test --quiet option"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --quiet -w 80 --klog=klog.txt klog -r /dev/null > $TMPLOG
> +$FWTS --quiet -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-quiet-0001/klog.txt klog -r /dev/null > $TMPLOG
> diff $TMPLOG /dev/null >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> diff --git a/fwts-test/arg-quiet-0001/test-0002.sh b/fwts-test/arg-quiet-0001/test-0002.sh
> index 627d9a0..6e55974 100755
> --- a/fwts-test/arg-quiet-0001/test-0002.sh
> +++ b/fwts-test/arg-quiet-0001/test-0002.sh
> @@ -4,7 +4,7 @@ TEST="Test -q option"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS -q -w 80 --klog=klog.txt klog -r /dev/null > $TMPLOG
> +$FWTS -q -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-quiet-0001/klog.txt klog -r /dev/null > $TMPLOG
> diff $TMPLOG /dev/null >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> diff --git a/fwts-test/arg-results-0001/test-0001.sh b/fwts-test/arg-results-0001/test-0001.sh
> index 607bb66..c258c95 100755
> --- a/fwts-test/arg-results-0001/test-0001.sh
> +++ b/fwts-test/arg-results-0001/test-0001.sh
> @@ -4,9 +4,9 @@ TEST="Test --results-output option"
> NAME=test-0001.sh
> TMPLOG=$TMP/results_$$.log
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog --results-output=$TMPLOG >& /dev/null
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog --results-output=$TMPLOG >& /dev/null
> grep "^[0-9]*[ ]*klog" $TMPLOG | cut -c7- > $TMPLOG.filtered
> -diff $TMPLOG.filtered results.log >> $FAILURE_LOG
> +diff $TMPLOG.filtered $FWTSTESTDIR/arg-results-0001/results.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-results-0001/test-0002.sh b/fwts-test/arg-results-0001/test-0002.sh
> index f067d91..b7e6ab0 100755
> --- a/fwts-test/arg-results-0001/test-0002.sh
> +++ b/fwts-test/arg-results-0001/test-0002.sh
> @@ -4,9 +4,9 @@ TEST="Test -r option"
> NAME=test-0002.sh
> TMPLOG=$TMP/results_$$.log
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog -r $TMPLOG >& /dev/null
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog -r $TMPLOG >& /dev/null
> grep "^[0-9]*[ ]*klog" $TMPLOG | cut -c7- > $TMPLOG.filtered
> -diff $TMPLOG.filtered results.log >> $FAILURE_LOG
> +diff $TMPLOG.filtered $FWTSTESTDIR/arg-results-0001/results.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-results-0001/test-0003.sh b/fwts-test/arg-results-0001/test-0003.sh
> index 4ba0a84..85ac06b 100755
> --- a/fwts-test/arg-results-0001/test-0003.sh
> +++ b/fwts-test/arg-results-0001/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test --results-output stdout option"
> NAME=test-0003.sh
> TMPLOG=$TMP/results_$$.log
>
> -($FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog --results-output=stdout | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG ) >& /dev/null
> -diff $TMPLOG results.log >> $FAILURE_LOG
> +($FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog --results-output=stdout | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG ) >& /dev/null
> +diff $TMPLOG $FWTSTESTDIR/arg-results-0001/results.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-results-0001/test-0004.sh b/fwts-test/arg-results-0001/test-0004.sh
> index 9e19460..01f87f3 100755
> --- a/fwts-test/arg-results-0001/test-0004.sh
> +++ b/fwts-test/arg-results-0001/test-0004.sh
> @@ -4,8 +4,8 @@ TEST="Test -r stdout option"
> NAME=test-0004.sh
> TMPLOG=$TMP/results_$$.log
>
> -($FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog -r stdout | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG ) >& /dev/null
> -diff $TMPLOG results.log >> $FAILURE_LOG
> +($FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog -r stdout | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG ) >& /dev/null
> +diff $TMPLOG $FWTSTESTDIR/arg-results-0001/results.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-results-0001/test-0005.sh b/fwts-test/arg-results-0001/test-0005.sh
> index 9ccba1a..443f419 100755
> --- a/fwts-test/arg-results-0001/test-0005.sh
> +++ b/fwts-test/arg-results-0001/test-0005.sh
> @@ -4,10 +4,10 @@ TEST="Test --results-output option (append)"
> NAME=test-0005.sh
> TMPLOG=$TMP/results_$$.log
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog --results-output=$TMPLOG >& /dev/null
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog --results-output=$TMPLOG >& /dev/null
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog --results-output=$TMPLOG >& /dev/null
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog --results-output=$TMPLOG >& /dev/null
> grep "^[0-9]*[ ]*klog" $TMPLOG | cut -c7- > $TMPLOG.filtered
> -diff $TMPLOG.filtered results-0005.log >> $FAILURE_LOG
> +diff $TMPLOG.filtered $FWTSTESTDIR/arg-results-0001/results-0005.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-results-0001/test-0006.sh b/fwts-test/arg-results-0001/test-0006.sh
> index bfb3d6c..36bc79b 100755
> --- a/fwts-test/arg-results-0001/test-0006.sh
> +++ b/fwts-test/arg-results-0001/test-0006.sh
> @@ -4,10 +4,10 @@ TEST="Test -r option (append)"
> NAME=test-0006.sh
> TMPLOG=$TMP/results_$$.log
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog -r $TMPLOG >& /dev/null
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog -r $TMPLOG >& /dev/null
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog -r $TMPLOG >& /dev/null
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-results-0001/klog.txt klog -r $TMPLOG >& /dev/null
> grep "^[0-9]*[ ]*klog" $TMPLOG | cut -c7- > $TMPLOG.filtered
> -diff $TMPLOG.filtered results-0005.log >> $FAILURE_LOG
> +diff $TMPLOG.filtered $FWTSTESTDIR/arg-results-0001/results-0005.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-results-no-separators-0001/test-0001.sh b/fwts-test/arg-results-no-separators-0001/test-0001.sh
> index fb9b7f3..cf424ee 100755
> --- a/fwts-test/arg-results-no-separators-0001/test-0001.sh
> +++ b/fwts-test/arg-results-no-separators-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test --results-no-separators option"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --results-no-separators --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --results-no-separators --klog=$FWTSTESTDIR/arg-results-no-separators-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-results-no-separators-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-show-progress-dialog-0001/test-0001.sh b/fwts-test/arg-show-progress-dialog-0001/test-0001.sh
> index 74b654d..8349e2b 100755
> --- a/fwts-test/arg-show-progress-dialog-0001/test-0001.sh
> +++ b/fwts-test/arg-show-progress-dialog-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test --show-progress-dialog option"
> NAME=test-0001.sh
> TMPLOG=$TMP/progress.log.$$
>
> -$FWTS -w 80 --show-progress-dialog --klog=klog.txt oops klog version > $TMPLOG
> -diff $TMPLOG progress-0001.log >> $FAILURE_LOG
> +$FWTS -w 80 --show-progress-dialog -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-show-progress-dialog-0001/klog.txt oops klog version > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-show-progress-dialog-0001/progress-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-show-progress-dialog-0001/test-0002.sh b/fwts-test/arg-show-progress-dialog-0001/test-0002.sh
> index 22b7b5d..08dd842 100755
> --- a/fwts-test/arg-show-progress-dialog-0001/test-0002.sh
> +++ b/fwts-test/arg-show-progress-dialog-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test -D option"
> NAME=test-0001.sh
> TMPLOG=$TMP/progress.log.$$
>
> -$FWTS -w 80 -D --klog=klog.txt oops klog version > $TMPLOG
> -diff $TMPLOG progress-0001.log >> $FAILURE_LOG
> +$FWTS -w 80 -D -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-show-progress-dialog-0001/klog.txt oops klog version > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-show-progress-dialog-0001/progress-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-show-tests-0001/test-0001.sh b/fwts-test/arg-show-tests-0001/test-0001.sh
> index 4a293d2..9c81be7 100755
> --- a/fwts-test/arg-show-tests-0001/test-0001.sh
> +++ b/fwts-test/arg-show-tests-0001/test-0001.sh
> @@ -6,7 +6,7 @@ TMPLOG=$TMP/arg-show-tests.log.$$
>
> stty cols 80
> $FWTS -s > $TMPLOG
> -diff $TMPLOG arg-show-tests-0001.log >> $FAILURE_LOG
> +diff $TMPLOG $FWTSTESTDIR/arg-show-tests-0001/arg-show-tests-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-show-tests-0001/test-0002.sh b/fwts-test/arg-show-tests-0001/test-0002.sh
> index 75c3559..e3f6c17 100755
> --- a/fwts-test/arg-show-tests-0001/test-0002.sh
> +++ b/fwts-test/arg-show-tests-0001/test-0002.sh
> @@ -6,7 +6,7 @@ TMPLOG=$TMP/arg-show-tests.log.$$
>
> stty cols 80
> $FWTS -s > $TMPLOG
> -diff $TMPLOG arg-show-tests-0001.log >> $FAILURE_LOG
> +diff $TMPLOG $FWTSTESTDIR/arg-show-tests-0001/arg-show-tests-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-show-tests-full-0001/test-0001.sh b/fwts-test/arg-show-tests-full-0001/test-0001.sh
> index 08dfe07..4858bee 100755
> --- a/fwts-test/arg-show-tests-full-0001/test-0001.sh
> +++ b/fwts-test/arg-show-tests-full-0001/test-0001.sh
> @@ -6,7 +6,7 @@ TMPLOG=$TMP/arg-show-tests-full.log.$$
>
> stty cols 80
> $FWTS --show-tests-full > $TMPLOG
> -diff $TMPLOG arg-show-tests-full-0001.log >> $FAILURE_LOG
> +diff $TMPLOG $FWTSTESTDIR/arg-show-tests-full-0001/arg-show-tests-full-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-table-path-0001/test-0001.sh b/fwts-test/arg-table-path-0001/test-0001.sh
> index cad4af7..77eb04a 100755
> --- a/fwts-test/arg-table-path-0001/test-0001.sh
> +++ b/fwts-test/arg-table-path-0001/test-0001.sh
> @@ -4,7 +4,7 @@ TEST="Test --table-path to load dumped tables produced by acpixtract"
> NAME=test-0001.sh
> TMPLOG=$TMP/acpidump.log.$$
> SORTED=$TMP/acpidump.log.sorted
> -HERE=`pwd`
> +HERE=$FWTSTESTDIR/arg-table-path-0001
>
> #
> # Unfortunately we can pull in the tables in different order depending
> @@ -13,7 +13,7 @@ HERE=`pwd`
> # the output before we diff.
> #
> $FWTS --log-format="%line %owner " -w 80 --table-path=$HERE acpidump - | grep "^[0-9]*[ ]*acpidump" | cut -c7- | sort | uniq > $TMPLOG
> -sort acpidump-0001.log > $SORTED
> +sort $HERE/acpidump-0001.log > $SORTED
> diff $TMPLOG $SORTED >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> diff --git a/fwts-test/arg-table-path-0001/test-0002.sh b/fwts-test/arg-table-path-0001/test-0002.sh
> index d9fb658..84db755 100755
> --- a/fwts-test/arg-table-path-0001/test-0002.sh
> +++ b/fwts-test/arg-table-path-0001/test-0002.sh
> @@ -4,7 +4,7 @@ TEST="Test -T to load dumped tables produced by acpixtract"
> NAME=test-0002.sh
> TMPLOG=$TMP/acpidump.log.$$
> SORTED=$TMP/acpidump.log.sorted
> -HERE=`pwd`
> +HERE=$FWTSTESTDIR/arg-table-path-0001
>
> #
> # Unfortunately we can pull in the tables in different order depending
> @@ -13,7 +13,7 @@ HERE=`pwd`
> # the output before we diff.
> #
> $FWTS --log-format="%line %owner " -w 80 -t $HERE acpidump - | grep "^[0-9]*[ ]*acpidump" | cut -c7- | sort | uniq > $TMPLOG
> -sort acpidump-0001.log > $SORTED
> +sort $HERE/acpidump-0001.log > $SORTED
> diff $TMPLOG $SORTED >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> diff --git a/fwts-test/arg-width-0001/test-0001.sh b/fwts-test/arg-width-0001/test-0001.sh
> index a33e5d4..57b1410 100755
> --- a/fwts-test/arg-width-0001/test-0001.sh
> +++ b/fwts-test/arg-width-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test -w 80"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0002.sh b/fwts-test/arg-width-0001/test-0002.sh
> index 1f52f28..d7392f9 100755
> --- a/fwts-test/arg-width-0001/test-0002.sh
> +++ b/fwts-test/arg-width-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test -w 90"
> NAME=test-0002.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 90 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0002.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 90 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0003.sh b/fwts-test/arg-width-0001/test-0003.sh
> index 8d67f02..76eef38 100755
> --- a/fwts-test/arg-width-0001/test-0003.sh
> +++ b/fwts-test/arg-width-0001/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test -w 100"
> NAME=test-0003.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 100 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 100 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0004.sh b/fwts-test/arg-width-0001/test-0004.sh
> index ddad193..79bc838 100755
> --- a/fwts-test/arg-width-0001/test-0004.sh
> +++ b/fwts-test/arg-width-0001/test-0004.sh
> @@ -4,8 +4,8 @@ TEST="Test -w 1000"
> NAME=test-0004.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 1000 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0004.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 1000 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0004.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0005.sh b/fwts-test/arg-width-0001/test-0005.sh
> index bf1c18e..94e263e 100755
> --- a/fwts-test/arg-width-0001/test-0005.sh
> +++ b/fwts-test/arg-width-0001/test-0005.sh
> @@ -4,8 +4,8 @@ TEST="Test --log-width=80"
> NAME=test-0005.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " --log-width=80 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " --log-width=80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0006.sh b/fwts-test/arg-width-0001/test-0006.sh
> index 97864ad..9abd382 100755
> --- a/fwts-test/arg-width-0001/test-0006.sh
> +++ b/fwts-test/arg-width-0001/test-0006.sh
> @@ -4,8 +4,8 @@ TEST="Test --log-width=90"
> NAME=test-0006.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " --log-width=90 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0002.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " --log-width=90 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0007.sh b/fwts-test/arg-width-0001/test-0007.sh
> index c8efa7d..30cf0c6 100755
> --- a/fwts-test/arg-width-0001/test-0007.sh
> +++ b/fwts-test/arg-width-0001/test-0007.sh
> @@ -4,8 +4,8 @@ TEST="Test --log-width=100"
> NAME=test-0007.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " --log-width=100 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " --log-width=100 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/arg-width-0001/test-0008.sh b/fwts-test/arg-width-0001/test-0008.sh
> index 0ae3759..a59e760 100755
> --- a/fwts-test/arg-width-0001/test-0008.sh
> +++ b/fwts-test/arg-width-0001/test-0008.sh
> @@ -4,8 +4,8 @@ TEST="Test --log-width=1000"
> NAME=test-0008.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " --log-width=1000 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0004.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " --log-width=1000 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/arg-width-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/arg-width-0001/klog-0004.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/checksum-0001/test-0001.sh b/fwts-test/checksum-0001/test-0001.sh
> index 79dcd73..49e9961 100755
> --- a/fwts-test/checksum-0001/test-0001.sh
> +++ b/fwts-test/checksum-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test checksum against known correct ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/checksum.log.$$
>
> -$FWTS --log-format="%line %owner " -w 120 --dumpfile=acpidump-0001.log checksum - | grep "^[0-9]*[ ]*checksum" | grep -v RSDP | cut -c7- > $TMPLOG
> -diff $TMPLOG checksum-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 120 --dumpfile=$FWTSTESTDIR/checksum-0001/acpidump-0001.log checksum - | grep "^[0-9]*[ ]*checksum" | grep -v RSDP | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/checksum-0001/checksum-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/checksum-0001/test-0003.sh b/fwts-test/checksum-0001/test-0003.sh
> index 3db119c..62f58b3 100755
> --- a/fwts-test/checksum-0001/test-0003.sh
> +++ b/fwts-test/checksum-0001/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test checksum against incorrect ACPI DSDT table"
> NAME=test-0003.sh
> TMPLOG=$TMP/checksum.log.$$
>
> -$FWTS --log-format="%line %owner " -w 120 --dumpfile=acpidump-0003.log checksum - | grep "^[0-9]*[ ]*checksum" | grep -v RSDP | cut -c7- > $TMPLOG
> -diff $TMPLOG checksum-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 120 --dumpfile=$FWTSTESTDIR/checksum-0001/acpidump-0003.log checksum - | grep "^[0-9]*[ ]*checksum" | grep -v RSDP | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/checksum-0001/checksum-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/checksum-0001/test-0004.sh b/fwts-test/checksum-0001/test-0004.sh
> index b7c40be..f3fd350 100755
> --- a/fwts-test/checksum-0001/test-0004.sh
> +++ b/fwts-test/checksum-0001/test-0004.sh
> @@ -4,8 +4,8 @@ TEST="Test checksum against incorrect ACPI DSDT table"
> NAME=test-0004.sh
> TMPLOG=$TMP/checksum.log.$$
>
> -$FWTS --log-format="%line %owner " -w 120 --dumpfile=acpidump-0004.log checksum - | grep "^[0-9]*[ ]*checksum" | grep -v RSDP | cut -c7- > $TMPLOG
> -diff $TMPLOG checksum-0004.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 120 --dumpfile=$FWTSTESTDIR/checksum-0001/acpidump-0004.log checksum - | grep "^[0-9]*[ ]*checksum" | grep -v RSDP | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/checksum-0001/checksum-0004.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/disassemble-0001/test-0001.sh b/fwts-test/disassemble-0001/test-0001.sh
> index 1fe4c32..27de6a0 100755
> --- a/fwts-test/disassemble-0001/test-0001.sh
> +++ b/fwts-test/disassemble-0001/test-0001.sh
> @@ -4,14 +4,14 @@ NAME=test-0001.sh
>
> TMPDIR=$TMP/disassemble-aml
> TMPLOG=$TMP/disassemble-aml.log.$$
> -HERE=`pwd`
> +HERE=$FWTSTESTDIR/disassemble-0001
>
> mkdir $TMPDIR
> $FWTS -w 80 --dumpfile=$HERE/acpidump.log --disassemble-aml=$TMPDIR - > $TMPLOG
>
> failed=0
> TEST="Test --disassemble-aml output to stdout"
> -diff disassemble-aml-0001.log $TMPLOG >> $FAILURE_LOG
> +diff $HERE/disassemble-aml-0001.log $TMPLOG >> $FAILURE_LOG
> if [ $? -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> else
> @@ -26,7 +26,7 @@ do
> # Remove lines that contain a tmp file output name in disassembly
> #
> grep -v "/tmp/fwts_iasl" $TMPDIR/$I.dsl | grep -v "AML Disassembler version" > $TMPDIR/$I.dsl.fixed.$$
> - grep -v "/tmp/fwts_iasl" $I.dsl.orig | grep -v "AML Disassembler version" > $TMPDIR/$I.dsl.orig.fixed.$$
> + grep -v "/tmp/fwts_iasl" $HERE/$I.dsl.orig | grep -v "AML Disassembler version" > $TMPDIR/$I.dsl.orig.fixed.$$
>
> diff $TMPDIR/$I.dsl.fixed.$$ $TMPDIR/$I.dsl.orig.fixed.$$
> if [ $? -eq 0 ]; then
> diff --git a/fwts-test/klog-0001/test-0001.sh b/fwts-test/klog-0001/test-0001.sh
> index cca066a..72b7f44 100755
> --- a/fwts-test/klog-0001/test-0001.sh
> +++ b/fwts-test/klog-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test klog against known failure patterns"
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/klog-0001/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/klog-0001/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/klog-0001/test-0002.sh b/fwts-test/klog-0001/test-0002.sh
> index ed46cb0..535f87d 100755
> --- a/fwts-test/klog-0001/test-0002.sh
> +++ b/fwts-test/klog-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test klog summary table against known failure patterns"
> NAME=test-0002.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep summary | sed 's/line: [0-9]*//' | cut -c7- > $TMPLOG
> -grep -v "log line:" klog-0002.log | diff $TMPLOG - >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/klog-0001/klog.txt klog - | grep summary | sed 's/line: [0-9]*//' | cut -c7- > $TMPLOG
> +grep -v "log line:" $FWTSTESTDIR/klog-0001/klog-0002.log | diff $TMPLOG - >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/klog-0001/test-0003.sh b/fwts-test/klog-0001/test-0003.sh
> index b25677d..badcb93 100755
> --- a/fwts-test/klog-0001/test-0003.sh
> +++ b/fwts-test/klog-0001/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test klog against known failure rate"
> NAME=test-0003.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep "unique errors in kernel log" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/klog-0001/klog.txt klog - | grep "unique errors in kernel log" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/klog-0001/klog-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/klog-0002/test-0001.sh b/fwts-test/klog-0002/test-0001.sh
> index 134c60d..23251de 100755
> --- a/fwts-test/klog-0002/test-0001.sh
> +++ b/fwts-test/klog-0002/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test klog against known common failure patterns (was the dmesg_common test
> NAME=test-0001.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/klog-0002/klog.txt klog - | grep "^[0-9]*[ ]*klog" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/klog-0002/klog-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/klog-0002/test-0002.sh b/fwts-test/klog-0002/test-0002.sh
> index 9f057a4..446343e 100755
> --- a/fwts-test/klog-0002/test-0002.sh
> +++ b/fwts-test/klog-0002/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test klog against known common failure patterns (was the dmesg_common test
> NAME=test-0002.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep summary | sed 's/line: [0-9]*//' | cut -c7- > $TMPLOG
> -grep -v "log line:" klog-0002.log | diff $TMPLOG - >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/klog-0002/klog.txt klog - | grep summary | sed 's/line: [0-9]*//' | cut -c7- > $TMPLOG
> +grep -v "log line:" $FWTSTESTDIR/klog-0002/klog-0002.log | diff $TMPLOG - >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/klog-0002/test-0003.sh b/fwts-test/klog-0002/test-0003.sh
> index 3588d29..000d5f6 100755
> --- a/fwts-test/klog-0002/test-0003.sh
> +++ b/fwts-test/klog-0002/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test klog against known common failure patterns (was the dmesg_common test
> NAME=test-0003.sh
> TMPLOG=$TMP/klog.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=klog.txt klog - | grep "errors in kernel log" | grep "Found" | cut -c7- > $TMPLOG
> -diff $TMPLOG klog-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --klog=$FWTSTESTDIR/klog-0002/klog.txt klog - | grep "errors in kernel log" | grep "Found" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/klog-0002/klog-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/method-0001/test-0001.sh b/fwts-test/method-0001/test-0001.sh
> index f210616..b67c0ec 100755
> --- a/fwts-test/method-0001/test-0001.sh
> +++ b/fwts-test/method-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test method against known correct ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/method.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log method - | grep "^[0-9]*[ ]*method" | cut -c7- > $TMPLOG
> -diff $TMPLOG method-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/method-0001/acpidump-0001.log method - | grep "^[0-9]*[ ]*method" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/method-0001/method-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/oops-0001/test-0001.sh b/fwts-test/oops-0001/test-0001.sh
> index 13318e1..4e80c84 100755
> --- a/fwts-test/oops-0001/test-0001.sh
> +++ b/fwts-test/oops-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test oops against known failure patterns"
> NAME=test-0001.sh
> TMPLOG=$TMP/oops.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=oops.txt oops - | grep "^[0-9]*[ ]*oops" | cut -c7- > $TMPLOG
> -diff $TMPLOG oops-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --klog=$FWTSTESTDIR/oops-0001/oops.txt oops - | grep "^[0-9]*[ ]*oops" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/oops-0001/oops-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/oops-0001/test-0002.sh b/fwts-test/oops-0001/test-0002.sh
> index 9b5e1bc..c6b57b0 100755
> --- a/fwts-test/oops-0001/test-0002.sh
> +++ b/fwts-test/oops-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test oops summary table against known failure patterns"
> NAME=test-0002.sh
> TMPLOG=$TMP/oops.log.$$
>
> -$FWTS --log-format="%line %owner " -w 400 --klog=oops.txt oops - | grep summary | sed 's/line: [0-9]*//' | cut -c7- > $TMPLOG
> -grep -v "log line:" oops-0002.log | diff $TMPLOG - >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 400 --klog=$FWTSTESTDIR/oops-0001/oops.txt oops - | grep summary | sed 's/line: [0-9]*//' | cut -c7- > $TMPLOG
> +grep -v "log line:" $FWTSTESTDIR/oops-0001/oops-0002.log | diff $TMPLOG - >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/oops-0001/test-0003.sh b/fwts-test/oops-0001/test-0003.sh
> index 8efb02d..eee508e 100755
> --- a/fwts-test/oops-0001/test-0003.sh
> +++ b/fwts-test/oops-0001/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test oops against known failure rate"
> NAME=test-0003.sh
> TMPLOG=$TMP/oops.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --klog=oops.txt oops - | grep "oopses" | grep -v "summary" | cut -c7- > $TMPLOG
> -diff $TMPLOG oops-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --klog=$FWTSTESTDIR/oops-0001/oops.txt oops - | grep "oopses" | grep -v "summary" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/oops-0001/oops-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/osilinux-0001/test-0001.sh b/fwts-test/osilinux-0001/test-0001.sh
> index 93adeac..d1369d8 100755
> --- a/fwts-test/osilinux-0001/test-0001.sh
> +++ b/fwts-test/osilinux-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test osilinux against known incorrect ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/osilinux.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log osilinux - | grep "^[0-9]*[ ]*osilinux" | cut -c7- > $TMPLOG
> -diff $TMPLOG osilinux-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/osilinux-0001/acpidump-0001.log osilinux - | grep "^[0-9]*[ ]*osilinux" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/osilinux-0001/osilinux-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/osilinux-0001/test-0002.sh b/fwts-test/osilinux-0001/test-0002.sh
> index 4564fa3..b03557d 100755
> --- a/fwts-test/osilinux-0001/test-0002.sh
> +++ b/fwts-test/osilinux-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test osilinux against known correct ACPI tables"
> NAME=test-0002.sh
> TMPLOG=$TMP/osilinux.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0002.log osilinux - | grep "^[0-9]*[ ]*osilinux" | cut -c7- > $TMPLOG
> -diff $TMPLOG osilinux-0002.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/osilinux-0001/acpidump-0002.log osilinux - | grep "^[0-9]*[ ]*osilinux" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/osilinux-0001/osilinux-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/syntaxcheck-0001/test-0001.sh b/fwts-test/syntaxcheck-0001/test-0001.sh
> index 231e314..6ee730a 100755
> --- a/fwts-test/syntaxcheck-0001/test-0001.sh
> +++ b/fwts-test/syntaxcheck-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test syntaxcheck against known correct ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/syntaxcheck.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log syntaxcheck - | grep "^[0-9]*[ ]*syntaxcheck" | cut -c7- > $TMPLOG
> -diff $TMPLOG syntaxcheck-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 -j $FWTSTESTDIR/../data --dumpfile=$FWTSTESTDIR/syntaxcheck-0001/acpidump-0001.log syntaxcheck - | grep "^[0-9]*[ ]*syntaxcheck" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/syntaxcheck-0001/syntaxcheck-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/wmi-0001/test-0001.sh b/fwts-test/wmi-0001/test-0001.sh
> index 10e97da..74343eb 100755
> --- a/fwts-test/wmi-0001/test-0001.sh
> +++ b/fwts-test/wmi-0001/test-0001.sh
> @@ -4,8 +4,8 @@ TEST="Test wmi against known correct ACPI tables"
> NAME=test-0001.sh
> TMPLOG=$TMP/wmi.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0001.log wmi - | grep "^[0-9]*[ ]*wmi" | cut -c7- > $TMPLOG
> -diff $TMPLOG wmi-0001.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/wmi-0001/acpidump-0001.log wmi - | grep "^[0-9]*[ ]*wmi" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/wmi-0001/wmi-0001.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/wmi-0001/test-0002.sh b/fwts-test/wmi-0001/test-0002.sh
> index ec1dbcf..1213991 100755
> --- a/fwts-test/wmi-0001/test-0002.sh
> +++ b/fwts-test/wmi-0001/test-0002.sh
> @@ -4,8 +4,8 @@ TEST="Test wmi against known correct ACPI tables"
> NAME=test-0002.sh
> TMPLOG=$TMP/wmi.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0002.log wmi - | grep "^[0-9]*[ ]*wmi" | cut -c7- > $TMPLOG
> -diff $TMPLOG wmi-0002.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/wmi-0001/acpidump-0002.log wmi - | grep "^[0-9]*[ ]*wmi" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/wmi-0001/wmi-0002.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
> diff --git a/fwts-test/wmi-0001/test-0003.sh b/fwts-test/wmi-0001/test-0003.sh
> index 8ca1b90..76d8db3 100755
> --- a/fwts-test/wmi-0001/test-0003.sh
> +++ b/fwts-test/wmi-0001/test-0003.sh
> @@ -4,8 +4,8 @@ TEST="Test wmi against known incorrect ACPI tables"
> NAME=test-0003.sh
> TMPLOG=$TMP/wmi.log.$$
>
> -$FWTS --log-format="%line %owner " -w 80 --dumpfile=acpidump-0003.log wmi - | grep "^[0-9]*[ ]*wmi" | cut -c7- > $TMPLOG
> -diff $TMPLOG wmi-0003.log >> $FAILURE_LOG
> +$FWTS --log-format="%line %owner " -w 80 --dumpfile=$FWTSTESTDIR/wmi-0001/acpidump-0003.log wmi - | grep "^[0-9]*[ ]*wmi" | cut -c7- > $TMPLOG
> +diff $TMPLOG $FWTSTESTDIR/wmi-0001/wmi-0003.log >> $FAILURE_LOG
> ret=$?
> if [ $ret -eq 0 ]; then
> echo PASSED: $TEST, $NAME
>
Acked-by: Ivan Hu <ivan.hu at canonical.com>
More information about the fwts-devel
mailing list