[PATCH 3/5][FWTS-TEST] arg-show-tests-full-0001: update log to keep in sync with fwts
Colin King
colin.king at canonical.com
Tue Jan 15 10:45:07 UTC 2013
From: Colin Ian King <colin.king at canonical.com>
fwts added some extra spacing in the output and also added a new
test uefirtmisc and some new subtests, so update this test to
keep in sync with fwts
Signed-off-by: Colin Ian King <colin.king at canonical.com>
---
.../arg-show-tests-full-0001.log | 130 +++++++++++----------
1 file changed, 69 insertions(+), 61 deletions(-)
diff --git a/arg-show-tests-full-0001/arg-show-tests-full-0001.log b/arg-show-tests-full-0001/arg-show-tests-full-0001.log
index 431c2b4..4b811fd 100644
--- a/arg-show-tests-full-0001/arg-show-tests-full-0001.log
+++ b/arg-show-tests-full-0001/arg-show-tests-full-0001.log
@@ -1,58 +1,59 @@
Batch tests:
- acpiinfo (3 tests):
+ acpiinfo (3 tests):
Determine Kernel ACPI version.
Determine machines ACPI version.
Determine AML compiler.
- acpitables (1 test):
+ acpitables (1 test):
Check ACPI tables.
- apicedge (1 test):
+ apicedge (1 test):
Legacy and PCI Interrupt Edge/Level trigger checks.
- apicinstance (1 test):
+ apicinstance (1 test):
Check single instance of APIC/MADT table.
- aspm (2 tests):
+ aspm (2 tests):
PCIe ASPM ACPI test.
PCIe ASPM registers test.
- bios32 (1 test):
+ bios32 (1 test):
Check BIOS32 Service Directory.
- bios_info (1 test):
+ bios_info (1 test):
Gather BIOS DMI information
- checksum (1 test):
+ checksum (1 test):
Check ACPI table checksums.
- cpufreq (1 test):
+ cpufreq (1 test):
CPU P-State Checks.
- crs (1 test):
+ crs (1 test):
Check PCI host bridge configuration using _CRS.
- csm (1 test):
+ csm (1 test):
Check for UEFI Compatibility Support Module.
- cstates (1 test):
+ cstates (1 test):
Check all CPUs C-states.
- dmar (1 test):
+ dmar (1 test):
Check DMA Remapping.
- dmi_decode (1 test):
+ dmi_decode (1 test):
Test DMI/SMBIOS tables for errors.
- ebda (1 test):
+ ebda (1 test):
Check EBDA is reserved in E820 table.
- fadt (1 test):
+ fadt (1 test):
Check FADT SCI_EN bit is enabled.
- fan (2 tests):
+ fan (2 tests):
Check fan status.
Load system, check CPU fan status.
- hda_audio (1 test):
+ hda_audio (1 test):
Check HDA Audio Pin Configs.
- hpet_check (3 tests):
+ hpet_check (4 tests):
Check HPET base in kernel log.
- Sanity check HPET configuration.
+ Check HPET base in HPET table.
Check HPET base in DSDT and/or SSDT.
- klog (1 test):
+ Sanity check HPET configuration.
+ klog (1 test):
Kernel log error check.
- maxfreq (1 test):
+ maxfreq (1 test):
Maximum CPU frequency check.
- maxreadreq (1 test):
+ maxreadreq (1 test):
Check firmware settings MaxReadReq for PCI Express devices.
- mcfg (2 tests):
+ mcfg (2 tests):
Validate MCFG table.
Validate MCFG PCI config space.
- method (139 tests):
+ method (139 tests):
Check Method Names.
Check _AEI.
Check _DDN (DOS Device Name).
@@ -192,9 +193,9 @@ Batch tests:
Check _ROM (Get ROM Data).
Check _SPD (Set POST Device).
Check _VPO (Video POST Options).
- microcode (1 test):
+ microcode (1 test):
Check for most recent microcode being loaded.
- mpcheck (9 tests):
+ mpcheck (9 tests):
Check MP header.
Check MP CPU entries.
Check MP Bus entries.
@@ -204,107 +205,114 @@ Batch tests:
Check MP System Address entries.
Check MP Bus Hierarchy entries.
Check MP Compatible Bus Address Space entries.
- msr (5 tests):
+ msr (5 tests):
Check CPU generic MSRs.
Check CPU specific model MSRs.
Check all P State Ratios.
Check C1 and C3 autodemotion.
Check SMRR MSR registers.
- mtrr (3 tests):
+ mtrr (3 tests):
Validate the kernel MTRR IOMEM setup.
Validate the MTRR setup across all processors.
Check for AMD MtrrFixDramModEn being cleared by the BIOS.
- nx (3 tests):
+ nx (3 tests):
Check CPU NX capability.
Check all CPUs have same BIOS set NX flag.
Check all CPUs have same msr setting in MSR 0x1a0.
- oops (1 test):
+ oops (1 test):
Kernel log oops check.
- os2gap (1 test):
+ os2gap (1 test):
Check the OS/2 15Mb memory hole is absent.
- osilinux (1 test):
+ osilinux (1 test):
Disassemble DSDT to check for _OSI("Linux").
- pcc (1 test):
+ pcc (1 test):
Check PCCH.
- pciirq (1 test):
+ pciirq (1 test):
PCI IRQ Routing Table.
- pnp (1 test):
+ pnp (1 test):
Check PnP BIOS Support Installation structure.
- smbios (1 test):
+ smbios (1 test):
Find and Check SMBIOS Table Entry Point.
- syntaxcheck (2 tests):
+ syntaxcheck (2 tests):
Disassemble and reassemble DSDT
Disassemble and reassemble SSDT
- version (3 tests):
+ version (3 tests):
Gather kernel signature.
Gather kernel system information.
Gather APCI driver version.
- virt (1 test):
+ virt (1 test):
Check CPU Virtualisation Configuration.
- wakealarm (4 tests):
+ wakealarm (4 tests):
Check existence of /sys/class/rtc/rtc0/wakealarm.
Trigger wakealarm for 1 seconds in the future.
Check if wakealarm is fired.
Multiple wakealarm firing tests.
- wmi (2 tests):
+ wmi (2 tests):
Check Windows Management Instrumentation in DSDT
Check Windows Management Instrumentation in SSDT
Interactive tests:
- ac_adapter (3 tests):
+ ac_adapter (3 tests):
Test ACPI ac_adapter state.
Test ac_adapter initial on-line state.
Test ac_adapter state changes.
- battery (1 test):
+ battery (1 test):
Check batteries.
- brightness (5 tests):
+ brightness (5 tests):
Check for maximum and actual brightness.
Change actual brightness.
Observe all brightness changes.
Observe min, max brightness changes.
Check brightness hotkeys.
- hotkey (1 test):
+ hotkey (1 test):
Hotkey keypress checks.
- lid (3 tests):
+ lid (3 tests):
Test LID buttons report open correctly.
Test LID buttons on a single open/close.
Test LID buttons on multiple open/close events.
- power_button (1 test):
+ power_button (1 test):
Test press of power button and ACPI event.
Power States tests:
- s3 (1 test):
+ s3 (1 test):
S3 suspend/resume test.
- s3power (1 test):
+ s3power (1 test):
S3 power loss during suspend test.
- s4 (1 test):
+ s4 (1 test):
S4 hibernate/resume test.
Utilities:
- acpidump (1 test):
+ acpidump (1 test):
Dump ACPI tables.
- cmosdump (1 test):
+ cmosdump (1 test):
Dump CMOS Memory.
- ebdadump (1 test):
+ ebdadump (1 test):
Dump EBDA region.
- memmapdump (1 test):
+ memmapdump (1 test):
Dump system memory map.
- mpdump (1 test):
+ mpdump (1 test):
Dump Multi Processor Data.
- romdump (1 test):
+ romdump (1 test):
Dump ROM data.
- uefidump (1 test):
+ uefidump (1 test):
Dump UEFI Variables.
Unsafe tests:
- uefirttime (4 tests):
+ uefirtmisc (2 tests):
+ Test for UEFI miscellaneous runtime service interfaces.
+ Stress test for UEFI miscellaneous runtime service interfaces.
+ uefirttime (4 tests):
Test UEFI RT service get time interface.
Test UEFI RT service set time interface.
Test UEFI RT service get wakeup time interface.
Test UEFI RT service set wakeup time interface.
- uefirtvariabl (3 tests):
+ uefirtvariable (7 tests):
Test UEFI RT service get variable interface.
Test UEFI RT service get next variable name interface.
Test UEFI RT service set variable interface.
+ Test UEFI RT service query variable info interface.
+ Test UEFI RT service variable interface stress test.
+ Test UEFI RT service set variable interface stress test.
+ Test UEFI RT service query variable info interface stress test.
-Total of 240 tests
+Total of 247 tests
--
1.8.0
More information about the fwts-devel
mailing list