[FWTS-TEST 3/3] klog-0001: update test to keep in sync with new klog patterns
Keng-Yu Lin
kengyu at canonical.com
Tue Aug 6 07:53:22 UTC 2013
Signed-off-by: Keng-Yu Lin <kengyu at canonical.com>
---
klog-0001/klog-0001.log | 74 ++++++++++++++++++++++++-------------------------
klog-0001/klog-0002.log | 6 ++--
2 files changed, 40 insertions(+), 40 deletions(-)
diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log
index 0274ff9..f2da037 100644
--- a/klog-0001/klog-0001.log
+++ b/klog-0001/klog-0001.log
@@ -3070,7 +3070,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -3085,7 +3085,7 @@ klog (20110112/uteval-103)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -3304,7 +3304,7 @@ klog (Node dd8159d8), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -3319,7 +3319,7 @@ klog dd8159d8), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -5027,7 +5027,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -5042,7 +5042,7 @@ klog f7015900), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -5102,7 +5102,7 @@ klog AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -5117,7 +5117,7 @@ klog AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -7762,7 +7762,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -7777,7 +7777,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/uteval-103)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -7909,7 +7909,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -7924,7 +7924,7 @@ klog ffff88013142fac0), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -8657,7 +8657,7 @@ klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -8672,7 +8672,7 @@ klog AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -9529,7 +9529,7 @@ klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -9544,7 +9544,7 @@ klog AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -12728,7 +12728,7 @@ klog ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -12743,7 +12743,7 @@ klog ffff88013bc2bd40), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -13373,7 +13373,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -13388,7 +13388,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -13579,7 +13579,7 @@ klog ffff88122fc1ece0), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -13594,7 +13594,7 @@ klog ffff88122fc1ec60), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14205,7 +14205,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14220,7 +14220,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14517,7 +14517,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14532,7 +14532,7 @@ klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14556,7 +14556,7 @@ klog ffff8800b3832600), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14571,7 +14571,7 @@ klog ffff8800b382b840), AE_AML_BUFFER_LIMIT
klog
klog ADVICE: Generally this error occurs because of access
klog outside of a buffer. This occurs for several reasons: a) A
-klog field does not fit withing the current length of a buffer,
+klog field does not fit within the current length of a buffer,
klog b) an ACPI table load did not fit into a buffer, c) An
klog attempt to convert a buffer into an integer failed because
klog the buffer was zero sized, d) a SMBus/IPMI
@@ -14804,16 +14804,16 @@ klog
klog ADVICE: Method _BQC (Brightness Query Current) returned an
klog invalid display brightness level.
klog
-klog FAILED [MEDIUM] KlogAcpiDuplicateAcpiVideoBus: Test 1,
-klog MEDIUM Kernel message: [ 20.435766] [Firmware Bug]:
-klog Duplicate ACPI video bus devices for the same VGA
-klog controller, please try module parameter
-klog "video.allow_duplicates=1"if the current driver doesn't
-klog work.
+klog FAILED [LOW] KlogDuplicateACPIVideoBus: Test 1, LOW Kernel
+klog message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video
+klog bus devices for the same VGA controller, please try module
+klog parameter "video.allow_duplicates=1"if the current driver
+klog doesn't work.
klog
-klog ADVICE: Try video module parameter
-klog video.allow_duplicates=1 if the current driver does't
-klog work.
+klog ADVICE: The ACPI video driver has found a duplicate ACPI
+klog video bus device for the same VGA controller. If the
+klog current driver does not work, one can try to work around
+klog this using the video.allow_duplicates=1 kernel parameter.
klog
klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
klog Kernel message: [ 20.634744] ACPI Warning for
diff --git a/klog-0001/klog-0002.log b/klog-0001/klog-0002.log
index 445cc44..43e8c1b 100644
--- a/klog-0001/klog-0002.log
+++ b/klog-0001/klog-0002.log
@@ -1266,7 +1266,7 @@ summary klog: HIGH Kernel message: [ 44.661543] ACPI Warning for _SB_.P
summary klog: HIGH Kernel message: [ 50.737630] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMI: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
summary klog: HIGH Kernel message: [ 50.737686] ACPI Warning for _SB_.PCI0.AGP_.VID_.MXMS: Excess arguments - needs 1, found 2 (20090903/nspredef-303)
summary
-summary Medium failures: 332
+summary Medium failures: 331
summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x3E, should be 0x41 (20110112/tbutils-314)
summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x65, should be 0x68 (20110112/tbutils-314)
summary klog: MEDIUM Kernel message: [ 0.000000] ACPI Warning: Incorrect checksum in table [APIC] - 0x69, should be 0x6C (20110112/tbutils-314)
@@ -1598,9 +1598,9 @@ summary klog: MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrec
summary klog: MEDIUM Kernel message: [ 3.382442] ACPI Warning: Incorrect checksum in table [_RAT] - 00, should be 63 (20090903/tbutils-314)
summary klog: MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect checksum in table [TCPA] - 0xF8, should be 0x9C (20110413/tbutils-314)
summary klog: MEDIUM Kernel message: [ 4.046031] ACPI Warning: Incorrect checksum in table [OEMB] - 4A, should be 47 (20090903/tbutils-314)
-summary klog: MEDIUM Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
summary
-summary Low failures: NONE
+summary Low failures: 1
+summary klog: LOW Kernel message: [ 20.435766] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
summary
summary Other failures: NONE
summary
--
1.8.1.2
More information about the fwts-devel
mailing list