[PATCH 6/6][FWTS-TEST] arg-table-path-0001: update log to now that table loading is done deterministically
Keng-Yu Lin
kengyu at canonical.com
Wed Jun 20 15:10:14 UTC 2012
On Wed, Jun 20, 2012 at 7:34 PM, Colin King <colin.king at canonical.com> wrote:
> From: Colin Ian King <colin.king at canonical.com>
>
> Signed-off-by: Colin Ian King <colin.king at canonical.com>
> ---
> arg-table-path-0001/acpidump-0001.log | 72 +++----
> arg-table-path-0001/results.log | 332 ---------------------------------
> 2 files changed, 36 insertions(+), 368 deletions(-)
> delete mode 100644 arg-table-path-0001/results.log
>
> diff --git a/arg-table-path-0001/acpidump-0001.log b/arg-table-path-0001/acpidump-0001.log
> index 5dd9c14..4bbfa9b 100644
> --- a/arg-table-path-0001/acpidump-0001.log
> +++ b/arg-table-path-0001/acpidump-0001.log
> @@ -73,6 +73,7 @@ acpidump [0x008 0008 4] H/W Signature: 0x0000
> acpidump [0x009 0009 1] Checksum: 0x0a
> acpidump [0x009 0009 1] Checksum: 0x11
> acpidump [0x009 0009 1] Checksum: 0x13
> +acpidump [0x009 0009 1] Checksum: 0x30
> acpidump [0x009 0009 1] Checksum: 0x32
> acpidump [0x009 0009 1] Checksum: 0x52
> acpidump [0x009 0009 1] Checksum: 0x59
> @@ -80,7 +81,6 @@ acpidump [0x009 0009 1] Checksum: 0x6d
> acpidump [0x009 0009 1] Checksum: 0x8f
> acpidump [0x009 0009 1] Checksum: 0x99
> acpidump [0x009 0009 1] Checksum: 0xa5
> -acpidump [0x009 0009 1] Checksum: 0xc1
> acpidump [0x009 0009 1] Checksum: 0xc2
> acpidump [0x009 0009 1] Checksum: 0xc8
> acpidump [0x009 0009 1] Checksum: 0xcc
> @@ -154,7 +154,7 @@ acpidump [0x024 0036 1] ACPI CPU ID: 0x01
> acpidump [0x024 0036 1] CMOS offset: 0x36
> acpidump [0x024 0036 2] Flags: 0x0000
> acpidump [0x024 0036 4] Base Address: 0x00000000
> -acpidump [0x024 0036 4] Entry 00 DSDT: 0xbff00000
> +acpidump [0x024 0036 4] Entry 00 APIC: 0xbff00000
> acpidump [0x024 0036 4] Event Timer ID: 0x8086a201
> acpidump [0x024 0036 4] FACS Address: 0xbf6e2fc0
> acpidump [0x024 0036 4] Local APIC Address: 0xfee00000
> @@ -167,7 +167,7 @@ acpidump [0x028 0040 1] addr_space_id: 0x00 (
> acpidump [0x028 0040 1] Bus: 0x00
> acpidump [0x028 0040 4] Base Reserved: 0x00000000
> acpidump [0x028 0040 4] DSDT Address: 0xbf6d9b6a
> -acpidump [0x028 0040 4] Entry 01 SSDT: 0xbff06004
> +acpidump [0x028 0040 4] Entry 01 APIC: 0xbff00078
> acpidump [0x028 0040 4] Flags: 0x00000001
> acpidump [0x029 0041 1] reg_bit_width: 0x00
> acpidump [0x029 0041 1] Source: 0x09
> @@ -178,7 +178,7 @@ acpidump [0x02b 0043 1] access_width: 0x00 (
> acpidump [0x02b 0043 1] Source: 0x00
> acpidump [0x02c 0044 1] Model: 0x00
> acpidump [0x02c 0044 4] Base Address: 0x00000000
> -acpidump [0x02c 0044 4] Entry 02 RSDP: 0xbff060ba
> +acpidump [0x02c 0044 4] Entry 02 BOOT: 0xbff000f0
> acpidump [0x02c 0044 4] Gbl Sys Int: 0x00000002
> acpidump [0x02c 0044 8] address: 0x00000000fed00000
> acpidump [0x02c 0044 8] Entry 01 unknown: 0x00000000bf6dfcc6
> @@ -187,7 +187,7 @@ acpidump [0x02e 0046 2] Flags: 0x000d
> acpidump [0x02e 0046 2] SCI Interrupt: 0x0009
> acpidump [0x030 0048 2] Flags: 0x0005
> acpidump [0x030 0048 4] Base Reserved: 0x00000000
> -acpidump [0x030 0048 4] Entry 03 SSDT: 0xbff060ee
> +acpidump [0x030 0048 4] Entry 03 DSDT: 0xbff00128
> acpidump [0x030 0048 4] SMI Command Port: 0x000000b2
> acpidump [0x032 0050 1] ACPI CPU ID: 0x00
> acpidump [0x033 0051 2] Flags: 0x0005
> @@ -195,7 +195,7 @@ acpidump [0x034 0052 1] ACPI Enable Value: 0xf0
> acpidump [0x034 0052 1] Bus: 0x00
> acpidump [0x034 0052 1] HPET Number: 0x00
> acpidump [0x034 0052 2] PCI Seg Grp Num: 0x0000
> -acpidump [0x034 0052 4] Entry 04 SSDT: 0xbff0644f
> +acpidump [0x034 0052 4] Entry 04 FACP: 0xbff0612c
> acpidump [0x034 0052 8] Entry 02 unknown: 0x00000000bf6dfd2e
> acpidump [0x035 0053 1] ACPI Disable Value: 0xf1
> acpidump [0x035 0053 1] Local APIC LINT: 0x01
> @@ -208,44 +208,44 @@ acpidump [0x037 0055 1] End Bus Num: 0x00
> acpidump [0x037 0055 1] Page Prot Attr: 0x00
> acpidump [0x037 0055 1] P-State Control: 0x80
> acpidump [0x038 0056 1] ACPI CPU ID: 0x01
> -acpidump [0x038 0056 4] Entry 05 BOOT: 0xbff06945
> +acpidump [0x038 0056 4] Entry 05 FACS: 0xbff06230
> acpidump [0x038 0056 4] PM1A Event Block: 0x00001000
> acpidump [0x039 0057 2] Flags: 0x0005
> acpidump [0x03a 0058 2] Flags: 0x000d
> acpidump [0x03b 0059 1] Local APIC LINT: 0x01
> -acpidump [0x03c 0060 4] Entry 06 SSDT: 0xbff0697d
> +acpidump [0x03c 0060 4] Entry 06 HPET: 0xbff06280
> acpidump [0x03c 0060 4] PM1B Event Block: 0x00000000
> acpidump [0x03c 0060 8] Entry 03 unknown: 0x00000000bf6dfd66
> -acpidump [0x040 0064 4] Entry 07 TMOR: 0xbff06a30
> +acpidump [0x040 0064 4] Entry 07 MCFG: 0xbff062c8
> acpidump [0x040 0064 4] PM1A Control Block: 0x00001004
> -acpidump [0x044 0068 4] Entry 08 HPET: 0xbff06a66
> +acpidump [0x044 0068 4] Entry 08 RSDP: 0xbff06314
> acpidump [0x044 0068 4] PM1B Control Block: 0x00000000
> acpidump [0x044 0068 8] Entry 04 unknown: 0x00000000bf6dfda2
> -acpidump [0x048 0072 4] Entry 09 SLIC: 0xbff06aae
> +acpidump [0x048 0072 4] Entry 09 SLIC: 0xbff06348
> acpidump [0x048 0072 4] PM2 Control Block: 0x00001020
> -acpidump [0x04c 0076 4] Entry 10 TCPA: 0xbff06c34
> +acpidump [0x04c 0076 4] Entry 10 SSDT: 0xbff064ce
> acpidump [0x04c 0076 4] PM Timer Block: 0x00001008
> acpidump [0x04c 0076 8] Entry 05 unknown: 0x00000000bf6dfdd4
> -acpidump [0x050 0080 4] Entry 11 APIC: 0xbff06c76
> +acpidump [0x050 0080 4] Entry 11 SSDT: 0xbff0678b
> acpidump [0x050 0080 4] GPE0 Block: 0x00001028
> -acpidump [0x054 0084 4] Entry 12 MCFG: 0xbff06cee
> +acpidump [0x054 0084 4] Entry 12 SSDT: 0xbff0683e
> acpidump [0x054 0084 4] GPE1 Block: 0x00000000
> acpidump [0x054 0084 8] Entry 06 unknown: 0x00000000bf6dfdfa
> acpidump [0x058 0088 1] PM1 Event Block Length: 0x04
> -acpidump [0x058 0088 4] Entry 13 APIC: 0xbff06d3a
> +acpidump [0x058 0088 4] Entry 13 SSDT: 0xbff06aad
> acpidump [0x059 0089 1] PM1 Control Block Length: 0x02
> acpidump [0x05a 0090 1] PM2 Control Block Length: 0x01
> acpidump [0x05b 0091 1] PM Timer Block Length: 0x04
> acpidump [0x05c 0092 1] GPE0 Block Length: 0x08
> -acpidump [0x05c 0092 4] Entry 14 FACP: 0xbff06db2
> +acpidump [0x05c 0092 4] Entry 14 SSDT: 0xbff06b63
> acpidump [0x05c 0092 8] Entry 07 unknown: 0x00000000bf6dff70
> acpidump [0x05d 0093 1] GPE1 Block Length: 0x00
> acpidump [0x05f 0095 1] _CST Support: 0x85
> acpidump [0x060 0096 2] C2 Latency: 0x0001
> -acpidump [0x060 0096 4] Entry 15 FACS: 0xbff06eb6
> +acpidump [0x060 0096 4] Entry 15 TCPA: 0xbff07059
> acpidump [0x062 0098 2] C3 Latency: 0x0023
> acpidump [0x064 0100 2] CPU Cache Size: 0x0000
> -acpidump [0x064 0100 4] Entry 16 SSDT: 0xbff06f06
> +acpidump [0x064 0100 4] Entry 16 TMOR: 0xbff0709b
> acpidump [0x064 0100 8] Entry 08 unknown: 0x00000000bf6dffd8
> acpidump [0x066 0102 2] CPU Cache Flush Stride: 0x0000
> acpidump [0x068 0104 1] Duty Cycle Offset: 0x01
> @@ -320,8 +320,8 @@ acpidump [0x0ec 0236 8] address: 0x0000
> acpidump 32 bit PM timer (V1): 0x0
> acpidump 8042 present on ports 60/64 (V2): 0x0
> acpidump All CPUs support C1 (V1): 0x1
> -acpidump APIC @ bff06c76 (104 bytes)
> -acpidump APIC @ bff06d3a (104 bytes)
> +acpidump APIC @ bff00000 (104 bytes)
> +acpidump APIC @ bff00078 (104 bytes)
> acpidump APIC Structure #1:
> acpidump APIC Structure #2:
> acpidump APIC Structure #3:
> @@ -329,7 +329,7 @@ acpidump APIC Structure #4:
> acpidump APIC Structure #5:
> acpidump APIC Structure #6:
> acpidump APIC Structure #7:
> -acpidump BOOT @ bff06945 (40 bytes)
> +acpidump BOOT @ bff000f0 (40 bytes)
> acpidump C2 works on MP system (V1): 0x0
> acpidump Cannot get read/write permission on I/O ports.
> acpidump Configuration #1:
> @@ -343,20 +343,20 @@ acpidump Control Method Power Button (V1): 0x0
> acpidump Control Method Sleep Button (V1): 0x1
> acpidump Count Size Cap: 0x1
> acpidump Docking Capability (V1): 0x0
> -acpidump DSDT @ bff00000 (24564 bytes)
> +acpidump DSDT @ bff00128 (24564 bytes)
> acpidump Dump ACPI tables.
> acpidump Enabled: 0x1
> -acpidump FACP @ bff06db2 (244 bytes)
> -acpidump FACS @ bff06eb6 (64 bytes)
> +acpidump FACP @ bff0612c (244 bytes)
> +acpidump FACS @ bff06230 (64 bytes)
> acpidump Hardware Rev: 0x01
> acpidump Headless, No Video (V3): 0x0
> -acpidump HPET @ bff06a66 (56 bytes)
> +acpidump HPET @ bff06280 (56 bytes)
> acpidump Interrupt Source Override:
> acpidump I/O APIC:
> acpidump IRQ Routing Cap: 0x1
> acpidump Legacy Devices Supported (V2): 0x0
> acpidump Local APIC NMI:
> -acpidump MCFG @ bff06cee (60 bytes)
> +acpidump MCFG @ bff062c8 (60 bytes)
> acpidump MSI Not Supported (V4): 0x0
> acpidump Num Comparitors: 0x02
> acpidump OEM Attr: 0x0
> @@ -370,21 +370,21 @@ acpidump Remote power on capable (V4): 0x0
> acpidump Reserved: 0x0
> acpidump RESERVED: 0x000
> acpidump Reset Register Supported (V2): 0x0
> -acpidump RSDP @ bff060ba (36 bytes)
> +acpidump RSDP @ bff06314 (36 bytes)
> acpidump RSDT @ bff07175 (104 bytes)
> acpidump RTC can wake system from S4 (V1): 0x1
> acpidump RTC_STS Valid after S4 wake (V4): 0x0
> acpidump RTC wake not in fixed reg space (V1): 0x0
> acpidump Sealed Case (V3): 0x0
> -acpidump SLIC @ bff06aae (374 bytes)
> -acpidump SSDT @ bff06004 (166 bytes)
> -acpidump SSDT @ bff060ee (685 bytes)
> -acpidump SSDT @ bff0644f (1254 bytes)
> -acpidump SSDT @ bff0697d (163 bytes)
> -acpidump SSDT @ bff06f06 (607 bytes)
> -acpidump TCPA @ bff06c34 (50 bytes)
> +acpidump SLIC @ bff06348 (374 bytes)
> +acpidump SSDT @ bff064ce (685 bytes)
> +acpidump SSDT @ bff0678b (163 bytes)
> +acpidump SSDT @ bff0683e (607 bytes)
> +acpidump SSDT @ bff06aad (166 bytes)
> +acpidump SSDT @ bff06b63 (1254 bytes)
> +acpidump TCPA @ bff07059 (50 bytes)
> acpidump Test 1 of 1: Dump ACPI tables.
> -acpidump TMOR @ bff06a30 (38 bytes)
> +acpidump TMOR @ bff0709b (38 bytes)
> acpidump Use APIC Cluster Model (V4): 0x0
> acpidump Use APIC Physical Dest. Mode (V4): 0x0
> acpidump Use native instr. after SLP_TYPx (V3): 0x0
> @@ -392,4 +392,4 @@ acpidump Use patform clock (V4): 0x0
> acpidump VGA Not Present (V4): 0x0
> acpidump WBINVD flushes all caches (V1): 0x0
> acpidump WBINVD instruction (V1): 0x1
> -acpidump XSDT @ bff063ab (148 bytes)
> +acpidump XSDT @ bff070d1 (148 bytes)
> diff --git a/arg-table-path-0001/results.log b/arg-table-path-0001/results.log
> deleted file mode 100644
> index 6d288d2..0000000
> --- a/arg-table-path-0001/results.log
> +++ /dev/null
> @@ -1,332 +0,0 @@
> -00001 fwts Results generated by fwts: Version V0.23.23 (Wed Aug 31 17:08:37 BST 2011).
> -00002 fwts
> -00003 fwts Some of this work - Copyright (c) 1999 - 2010, Intel Corp. All rights
> -00004 fwts reserved.
> -00005 fwts Some of this work - Copyright (c) 2010 - 2011, Canonical.
> -00006 fwts
> -00007 fwts This test run on 05/10/11 at 11:05:36 on host Linux lenovo 3.0.0-12-generic
> -00008 fwts #19-Ubuntu SMP Fri Sep 23 21:23:39 UTC 2011 x86_64.
> -00009 fwts
> -00010 fwts Running tests: version bios_info oops mtrr dmesg_common acpiinfo klog
> -00011 fwts microcode msr nx maxfreq virt maxreadreq crs hpet_check dmi_decode smbios
> -00012 fwts mpcheck os2gap hda_audio bios32 ebda wmi osilinux apicedge method mcfg fan
> -00013 fwts fadt cstates checksum apicinstance acpitables syntaxcheck wakealarm.
> -
> -00015 version Gather kernel system information.
> -00016 version -----------------------------------------------------------------------------
> -00017 version Test 1 of 3: Gather kernel signature.
> -00018 version PASSED: Test 1, Signature: Ubuntu 3.0.0-12.19-generic 3.0.4
> -00019 version
> -00020 version Test 2 of 3: Gather kernel system information.
> -00021 version PASSED: Test 2, Kernel Version: Linux version 3.0.0-12-generic
> -00022 version (buildd at crested) (gcc version 4.6.1 (Ubuntu/Linaro 4.6.1-9ubuntu3) )
> -00023 version #19-Ubuntu SMP Fri Sep 23 21:23:39 UTC 2011
> -00024 version
> -00025 version Test 3 of 3: Gather APCI driver version.
> -00026 version PASSED: Test 3, ACPI Version: 20110413
> -00027 version
> -00028 version =============================================================================
> -00029 version 3 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00030 version =============================================================================
> -
> -00032 bios_info Gather BIOS DMI information.
> -00033 bios_info -----------------------------------------------------------------------------
> -00034 bios_info Test 1 of 1: Gather BIOS DMI information
> -00035 bios_info BIOS Vendor : LENOVO
> -00036 bios_info BIOS Version : 68ET27WW
> -00037 bios_info BIOS Release Date : 11/14/2007
> -00038 bios_info Board Name : IEL10
> -00039 bios_info Board Version : REFERENCE
> -00040 bios_info Board Asset Tag :
> -00041 bios_info Chassis Type : 10
> -00042 bios_info Chassis Vendor : No Enclosure
> -00043 bios_info Chassis Version : N/A
> -00044 bios_info Chassic Asset Tag : No Asset Tag
> -00045 bios_info Product Name : 0769BMG
> -00046 bios_info Product Version : 3000 N200
> -00047 bios_info System Vendor : LENOVO
> -00048 bios_info
> -00049 bios_info =============================================================================
> -00050 bios_info 0 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 1 info only.
> -00051 bios_info =============================================================================
> -
> -00053 oops Scan kernel log for Oopses.
> -00054 oops -----------------------------------------------------------------------------
> -00055 oops Test 1 of 1: Kernel log oops check.
> -00056 oops PASSED: Test 1, Found no oopses in kernel log.
> -00057 oops
> -00058 oops =============================================================================
> -00059 oops 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00060 oops =============================================================================
> -
> -00062 mtrr MTRR validation.
> -00063 mtrr -----------------------------------------------------------------------------
> -00064 mtrr Must be run as root or sudo to be able to read system information.
> -00065 mtrr Aborted test, insufficient privilege.
> -00066 mtrr =============================================================================
> -00067 mtrr 0 passed, 0 failed, 0 warnings, 3 aborted, 0 skipped, 0 info only.
> -00068 mtrr =============================================================================
> -
> -00070 dmesg_common General dmesg common errors check.
> -00071 dmesg_common -----------------------------------------------------------------------------
> -00072 dmesg_common Test 1 of 1: Check common errors in kernel log.
> -00073 dmesg_common PASSED: Test 1, No common error messages found in kernel message log.
> -00074 dmesg_common
> -00075 dmesg_common =============================================================================
> -00076 dmesg_common 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00077 dmesg_common =============================================================================
> -
> -00079 acpiinfo General ACPI information check.
> -00080 acpiinfo -----------------------------------------------------------------------------
> -00081 acpiinfo Test 1 of 1: General ACPI information check.
> -00082 acpiinfo This test checks the output of the in-kernel ACPI CA against common error
> -00083 acpiinfo messages that indicate a bad interaction with the bios, including those that
> -00084 acpiinfo point at AML syntax errors.
> -00085 acpiinfo DSDT was compiled by the Intel AML compiler.
> -00086 acpiinfo PASSED: Test 1, Found no errors in kernel log.
> -00087 acpiinfo
> -00088 acpiinfo =============================================================================
> -00089 acpiinfo 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00090 acpiinfo =============================================================================
> -
> -00092 klog Scan kernel log for errors and warnings.
> -00093 klog -----------------------------------------------------------------------------
> -00094 klog Test 1 of 1: Kernel log error check.
> -00095 klog FAILED [HIGH] KlogACPIBIOSBugMultipleAPIC: Test 1, HIGH Kernel message: [
> -00096 klog 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
> -00097 klog
> -00098 klog ADVICE: The kernel has detected more than one ACPI Multiple APIC Description
> -00099 klog Table (MADT) (these tables have the "APIC" signature). There should only be
> -00100 klog one MADT and the kernel will by default select the first one. However, one can
> -00101 klog override this and select the Nth MADT using acpi_apic_instance=N.
> -00102 klog
> -00103 klog Kernel message: [ 0.228089] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query
> -00104 klog ignored
> -00105 klog
> -00106 klog ADVICE: This is not exactly a failure mode but a warning from the kernel. The
> -00107 klog _OSI() method has implemented a match to the 'Linux' query in the DSDT and
> -00108 klog this is redundant because the ACPI driver matches onto the Windows _OSI
> -00109 klog strings by default.
> -00110 klog
> -00111 klog Found 1 unique errors in kernel log.
> -00112 klog
> -00113 klog =============================================================================
> -00114 klog 0 passed, 1 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00115 klog =============================================================================
> -
> -00117 microcode Check if system is using latest microcode.
> -00118 microcode -----------------------------------------------------------------------------
> -00119 microcode Must be run as root or sudo to be able to read system information.
> -00120 microcode Aborted test, insufficient privilege.
> -00121 microcode =============================================================================
> -00122 microcode 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00123 microcode =============================================================================
> -
> -00125 msr MSR register tests.
> -00126 msr -----------------------------------------------------------------------------
> -00127 msr Must be run as root or sudo to be able to read system information.
> -00128 msr Aborted test, insufficient privilege.
> -00129 msr =============================================================================
> -00130 msr 0 passed, 0 failed, 0 warnings, 5 aborted, 0 skipped, 0 info only.
> -00131 msr =============================================================================
> -
> -00133 nx Test if CPU NX is disabled by the BIOS.
> -00134 nx -----------------------------------------------------------------------------
> -00135 nx Must be run as root or sudo to be able to read system information.
> -00136 nx Aborted test, insufficient privilege.
> -00137 nx =============================================================================
> -00138 nx 0 passed, 0 failed, 0 warnings, 3 aborted, 0 skipped, 0 info only.
> -00139 nx =============================================================================
> -
> -00141 maxfreq Check max CPU frequencies against max scaling frequency.
> -00142 maxfreq -----------------------------------------------------------------------------
> -00143 maxfreq Test 1 of 1: Maximum CPU frequency check.
> -00144 maxfreq This test checks the maximum CPU frequency as detected by the kernel for each
> -00145 maxfreq CPU against maxiumum frequency as specified by the BIOS frequency scaling
> -00146 maxfreq settings.
> -00147 maxfreq PASSED: Test 1, 2 CPUs passed the maximum frequency check.
> -00148 maxfreq
> -00149 maxfreq =============================================================================
> -00150 maxfreq 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00151 maxfreq =============================================================================
> -
> -00153 virt Test CPU Virtualisation Configuration.
> -00154 virt -----------------------------------------------------------------------------
> -00155 virt Must be run as root or sudo to be able to read system information.
> -00156 virt Aborted test, insufficient privilege.
> -00157 virt =============================================================================
> -00158 virt 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00159 virt =============================================================================
> -
> -00161 maxreadreq Checks firmware has set PCI Express MaxReadReq to a higher value on
> -00162 maxreadreq non-motherboard devices.
> -00163 maxreadreq -----------------------------------------------------------------------------
> -00164 maxreadreq Must be run as root or sudo to be able to read system information.
> -00165 maxreadreq Aborted test, insufficient privilege.
> -00166 maxreadreq =============================================================================
> -00167 maxreadreq 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00168 maxreadreq =============================================================================
> -
> -00170 crs Check PCI host bridge configuration using _CRS.
> -00171 crs -----------------------------------------------------------------------------
> -00172 crs Must be run as root or sudo to be able to read system information.
> -00173 crs Aborted test, insufficient privilege.
> -00174 crs =============================================================================
> -00175 crs 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00176 crs =============================================================================
> -
> -00178 hpet_check HPET configuration test.
> -00179 hpet_check -----------------------------------------------------------------------------
> -00180 hpet_check Must be run as root or sudo to be able to read system information.
> -00181 hpet_check Aborted test, insufficient privilege.
> -00182 hpet_check =============================================================================
> -00183 hpet_check 0 passed, 0 failed, 0 warnings, 3 aborted, 0 skipped, 0 info only.
> -00184 hpet_check =============================================================================
> -
> -00186 dmi_decode Test DMI/SMBIOS tables for errors.
> -00187 dmi_decode -----------------------------------------------------------------------------
> -00188 dmi_decode Must be run as root or sudo to be able to read system information.
> -00189 dmi_decode Aborted test, insufficient privilege.
> -00190 dmi_decode =============================================================================
> -00191 dmi_decode 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00192 dmi_decode =============================================================================
> -
> -00194 smbios Check SMBIOS.
> -00195 smbios -----------------------------------------------------------------------------
> -00196 smbios Must be run as root or sudo to be able to read system information.
> -00197 smbios Aborted test, insufficient privilege.
> -00198 smbios =============================================================================
> -00199 smbios 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00200 smbios =============================================================================
> -
> -00202 mpcheck Check MultiProcessor Tables.
> -00203 mpcheck -----------------------------------------------------------------------------
> -00204 mpcheck Must be run as root or sudo to be able to read system information.
> -00205 mpcheck Aborted test, insufficient privilege.
> -00206 mpcheck =============================================================================
> -00207 mpcheck 0 passed, 0 failed, 0 warnings, 9 aborted, 0 skipped, 0 info only.
> -00208 mpcheck =============================================================================
> -
> -00210 os2gap OS/2 memory hole test.
> -00211 os2gap -----------------------------------------------------------------------------
> -00212 os2gap Test 1 of 1: Check the OS/2 15Mb memory hole is absent.
> -00213 os2gap PASSED: Test 1, No OS/2 memory hole found.
> -00214 os2gap
> -00215 os2gap =============================================================================
> -00216 os2gap 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00217 os2gap =============================================================================
> -
> -00219 hda_audio Check HDA Audio Pin Configs.
> -00220 hda_audio -----------------------------------------------------------------------------
> -00221 hda_audio Test 1 of 1: Check HDA Audio Pin Configs.
> -00222 hda_audio Checking 'hwC0D0':
> -00223 hda_audio Vendor Name : Realtek
> -00224 hda_audio Vendor ID : 0x10ec0862
> -00225 hda_audio Subsystem ID : 0x17aa3867
> -00226 hda_audio Revision ID : 0x100001
> -00227 hda_audio BIOS pin configurations:
> -00228 hda_audio Pin Setting
> -00229 hda_audio 0x0014 0x99130110
> -00230 hda_audio 0x0015 0x411111f0
> -00231 hda_audio 0x0016 0x411111f0
> -00232 hda_audio 0x0017 0x411111f0
> -00233 hda_audio 0x0018 0x03a19820
> -00234 hda_audio 0x0019 0x99a3012f
> -00235 hda_audio 0x001a 0x411111f0
> -00236 hda_audio 0x001b 0x0321401f
> -00237 hda_audio 0x001c 0x411111f0
> -00238 hda_audio 0x001d 0x40178e2d
> -00239 hda_audio 0x001e 0x411111f0
> -00240 hda_audio PASSED: Test 1, Default BIOS pin configurations did not have software
> -00241 hda_audio override.
> -00242 hda_audio
> -00243 hda_audio
> -00244 hda_audio =============================================================================
> -00245 hda_audio 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00246 hda_audio =============================================================================
> -
> -00248 bios32 Check BIOS32 Service Directory.
> -00249 bios32 -----------------------------------------------------------------------------
> -00250 bios32 Must be run as root or sudo to be able to read system information.
> -00251 bios32 Aborted test, insufficient privilege.
> -00252 bios32 =============================================================================
> -00253 bios32 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00254 bios32 =============================================================================
> -
> -00256 ebda Validate EBDA region is mapped and reserved in memory map table.
> -00257 ebda -----------------------------------------------------------------------------
> -00258 ebda Must be run as root or sudo to be able to read system information.
> -00259 ebda Aborted test, insufficient privilege.
> -00260 ebda =============================================================================
> -00261 ebda 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00262 ebda =============================================================================
> -
> -00264 wmi Extract and analyse Windows Management Instrumentation (WMI).
> -00265 wmi -----------------------------------------------------------------------------
> -00266 wmi Test 1 of 2: Check Windows Management Instrumentation in DSDT
> -00267 wmi Must be run as root or sudo to be able to read system information.
> -00268 wmi ABORTED: Test 1, Cannot disassemble and parse for WMI information.
> -00269 wmi
> -00270 wmi Test 2 of 2: Check Windows Management Instrumentation in SSDT
> -00271 wmi Must be run as root or sudo to be able to read system information.
> -00272 wmi ABORTED: Test 2, Cannot disassemble and parse for WMI information.
> -00273 wmi
> -00274 wmi =============================================================================
> -00275 wmi 0 passed, 0 failed, 0 warnings, 2 aborted, 0 skipped, 2 info only.
> -00276 wmi =============================================================================
> -
> -00278 osilinux Disassemble DSDT to check for _OSI("Linux").
> -00279 osilinux -----------------------------------------------------------------------------
> -00280 osilinux Test 1 of 1: Disassemble DSDT to check for _OSI("Linux").
> -00281 osilinux Must be run as root or sudo to be able to read system information.
> -00282 osilinux ABORTED: Test 1, Cannot disassemble DSDT with iasl.
> -00283 osilinux
> -00284 osilinux =============================================================================
> -00285 osilinux 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00286 osilinux =============================================================================
> -
> -00288 apicedge APIC Edge/Level Check.
> -00289 apicedge -----------------------------------------------------------------------------
> -00290 apicedge Test 1 of 1: Legacy and PCI Interrupt Edge/Level trigger checks.
> -00291 apicedge PASSED: Test 1, Legacy interrupts are edge and PCI interrupts are level
> -00292 apicedge triggered.
> -00293 apicedge
> -00294 apicedge =============================================================================
> -00295 apicedge 1 passed, 0 failed, 0 warnings, 0 aborted, 0 skipped, 0 info only.
> -00296 apicedge =============================================================================
> -
> -00298 method ACPI DSDT Method Semantic Tests.
> -00299 method -----------------------------------------------------------------------------
> -00300 method Must be run as root or sudo to be able to read system information.
> -00301 method FADT Preferred PM profile indicates this is not a Mobile Platform, skipping
> -00302 method Mobile Platform specific tests.
> -00303 method Must be run as root or sudo to be able to read system information.
> -00304 method Aborted test, initialisation failed.
> -00305 method =============================================================================
> -00306 method 0 passed, 0 failed, 0 warnings, 92 aborted, 0 skipped, 0 info only.
> -00307 method =============================================================================
> -
> -00309 mcfg MCFG PCI Express* memory mapped config space.
> -00310 mcfg -----------------------------------------------------------------------------
> -00311 mcfg Must be run as root or sudo to be able to read system information.
> -00312 mcfg Aborted test, insufficient privilege.
> -00313 mcfg =============================================================================
> -00314 mcfg 0 passed, 0 failed, 0 warnings, 1 aborted, 0 skipped, 0 info only.
> -00315 mcfg =============================================================================
> -
> -00317 fan Simple Fan Tests.
> -00318 fan -----------------------------------------------------------------------------
> -00319 fan Test 1 of 2: Check fan status.
> -00320 fan Test how many fans there are in the system. Check for the current status of
> -00321 fan the fan(s).
> -00322 fan PASSED: Test 1, Fan cooling_device0 of type Processor has max cooling state 10
> -00323 fan and current cooling state 0.
> -00324 fan PASSED: Test 1, Fan cooling_device1 of type Processor has max cooling state 10
> -00325 fan and current cooling state 0.
> -00326 fan PASSED: Test 1, Fan cooling_device2 of type LCD has max cooling state 7 and
> -00327 fan current cooling state 7.
> -00328 fan
> -00329 fan Test 2 of 2: Load system, check CPU fan status.
> -00330 fan Test how many fans there are in the system. Check for the current status of
> -00331 fan the fan(s).
> -00332 fan Loading CPUs for 20 seconds to try and get fan speeds to change.
> --
> 1.7.10.4
>
Acked-by: Keng-Yu Lin <kengyu at canonical.com>
More information about the fwts-devel
mailing list