[PATCH 7/9][FWTS-TEST] klog-0001: Update klog test to reflect changes in fwts klog database
Colin King
colin.king at canonical.com
Mon Dec 17 10:57:14 UTC 2012
From: Colin Ian King <colin.king at canonical.com>
The fwts klog database has expanded the advice and checking for a lot
of errors, so update this test to reflect the improved changes.
Signed-off-by: Colin Ian King <colin.king at canonical.com>
---
klog-0001/klog-0001.log | 10057 ++++++++++++++++++++++++++--------------------
1 file changed, 5721 insertions(+), 4336 deletions(-)
diff --git a/klog-0001/klog-0001.log b/klog-0001/klog-0001.log
index c4bf1ab..d1febf7 100644
--- a/klog-0001/klog-0001.log
+++ b/klog-0001/klog-0001.log
@@ -2397,14 +2397,16 @@ klog opcode corruption in the DSDT or SSDT tables or a bug in
klog the ACPI execution engine. Recommend disassembing using
klog iasl to find any offending code.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.034090] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ee025630),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
klog message: [ 0.040119] [Firmware Bug]: the BIOS has
@@ -2585,32 +2587,38 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.077854] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f4c250d8), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.077854] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.078226] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.APCT] (Node
klog f7033090), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.078254] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.GCAP] (Node
klog f7033078), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.078268] ACPI Warning: Incorrect
@@ -2621,14 +2629,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.078278] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog f7033048), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.078686] ACPI Warning: Incorrect
@@ -2648,50 +2658,62 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.085590] ACPI Error: Could not map memory at
-klog 0x000000007F5E3520, size 463 (20110112/exregion-178)
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.085590] ACPI Error: Could not map
+klog memory at 0x000000007F5E3520, size 463 (20110112
+klog /exregion-178)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.085606] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1.APPT] (Node f403d228),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.085618] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1.GCAP] (Node f403d1f8),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.085627] ACPI Error: Could not map memory at
-klog 0x000000007D3E1520, size 463 (20110112/exregion-178)
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.085627] ACPI Error: Could not map
+klog memory at 0x000000007D3E1520, size 463 (20110112
+klog /exregion-178)
+klog
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.085628] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1._PDC] (Node f403d1c8),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.085974] ACPI Warning: Incorrect
@@ -2711,50 +2733,62 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.086081] ACPI Error: Could not map memory at
-klog 0x000000007F395420, size 141 (20110112/exregion-178)
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.086081] ACPI Error: Could not map
+klog memory at 0x000000007F395420, size 141 (20110112
+klog /exregion-178)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.086097] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1.APCT] (Node f403d210),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.086108] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2.GCAP] (Node f403d270),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.086118] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2._PDC] (Node f403d240),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.086119] ACPI Error: Could not map memory at
-klog 0x000000007D198120, size 141 (20110112/exregion-178)
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.086119] ACPI Error: Could not map
+klog memory at 0x000000007D198120, size 141 (20110112
+klog /exregion-178)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.088999] ACPI Warning: Incorrect
@@ -2791,21 +2825,27 @@ klog
klog ADVICE: A Method has returned a Package List that was
klog larger than expected.
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.091463] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.APPT] (Node
klog f701e228), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.091510] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.GCAP] (Node
klog f701e1f8), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.091541] ACPI Warning: Incorrect
@@ -2816,13 +2856,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.091552] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog f701e1c8), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.091778] ACPI Warning: Incorrect
@@ -2842,32 +2885,38 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.092524] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.APCT] (Node
klog f701e210), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.092570] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2.GCAP] (Node
klog f701e270), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.092612] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
klog f701e240), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
klog message: [ 0.093544] ACPI Error: Needed type [Reference],
@@ -2893,41 +2942,50 @@ klog ADVICE: _BQC (Brightness Query Current level) seems to be
klog missing. This method returns the current brightness level
klog of a built-in display output device.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.095719] ACPI Error: Could not map memory at
-klog 0x0000000087127520, size 463 (20110112/exregion-178)
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.095719] ACPI Error: Could not map
+klog memory at 0x0000000087127520, size 463 (20110112
+klog /exregion-178)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.095737] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1.APPT] (Node f383e498),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.095749] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1.GCAP] (Node f383e468),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.095760] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1._PDC] (Node f383e438),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiMissingBqc: Test 1, HIGH Kernel
klog message: [ 0.095817] [Firmware Bug]: ACPI: ACPI brightness
@@ -2937,41 +2995,50 @@ klog ADVICE: _BQC (Brightness Query Current level) seems to be
klog missing. This method returns the current brightness level
klog of a built-in display output device.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.096257] ACPI Error: Could not map memory at
-klog 0x0000000086DB1C20, size 141 (20110112/exregion-178)
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.096257] ACPI Error: Could not map
+klog memory at 0x0000000086DB1C20, size 141 (20110112
+klog /exregion-178)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.096273] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1.APCT] (Node f383e480),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.096285] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2.GCAP] (Node f383e4e0),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.096295] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2._PDC] (Node f383e4b0),
klog AE_NO_MEMORY (20110112/psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.096447] ACPI Warning: Incorrect
@@ -3009,13 +3076,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.101946] ACPI Error: Method parse/execution
-klog failed [_SB_.MEM_._CRS] (Node f442af60),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.101946] ACPI Error: Method parse
+klog /execution failed [_SB_.MEM_._CRS] (Node f442af60),
klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.101953] ACPI Error: Method execution failed
@@ -3034,23 +3104,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.104297] ACPI Error (psargs-0359): [OSYS]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.104297] ACPI Error (psargs-0359):
+klog [OSYS] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.104304] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.ACEL._STA] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.104304] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.ACEL._STA] (Node
klog f701c4e0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
klog 1, HIGH Kernel message: [ 0.105061] ACPI Warning: Package
@@ -3093,14 +3164,16 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.109635] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f701adc8),
-klog AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.109635] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f701adc8), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.110905] ACPI Warning: Incorrect
@@ -3111,29 +3184,38 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.113709] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1._PDC] (Node f5822150),
klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.113864] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2._PDC] (Node f58221e0),
klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.114544] ACPI Error: Method parse
klog /execution failed [_PR_.CPU0._PDC] (Node f54211c8),
klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.115838] ACPI Warning: Incorrect
@@ -3144,23 +3226,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.118277] ACPI Error (psargs-0359): [SUPP]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.118277] ACPI Error (psargs-0359):
+klog [SUPP] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.118284] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7012780),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.118284] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7012780), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.118568] ACPI Warning: Incorrect
@@ -3180,23 +3263,28 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.122347] ACPI Error: Could not map memory at
-klog 0x00000000000FFA32, size 0 (20100428/exregion-178)
+klog FAILED [HIGH] KlogAcpiOpRegionMemMapError: Test 1, HIGH
+klog Kernel message: [ 0.122347] ACPI Error: Could not map
+klog memory at 0x00000000000FFA32, size 0 (20100428
+klog /exregion-178)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was requested to read or
+klog write to a memory region via a memory space handler but
+klog the logical address could not be mapped from the given
+klog physical address given. This memory region is not mappable
+klog , so it could be an AML opregion bug or a bug in the
+klog kernel (less likely).
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.122369] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU0._PDC] (Node
klog f70191c8), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 0.128150] ACPI Warning for
@@ -3225,13 +3313,17 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.136600] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.PIB_.SIO0.LPT_._CRS]
-klog (Node dd8159d8), AE_AML_BUFFER_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.136600] ACPI Error (psparse-0537):
+klog Method parse/execution failed
+klog [_SB_.PCI0.PIB_.SIO0.LPT_._CRS] (Node dd8159d8),
+klog AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.136637] ACPI Error (uteval-0250): Method
@@ -3266,14 +3358,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.150000] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
klog ffff880137e47618), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.150000] ACPI Error: No handler for
@@ -3293,32 +3387,36 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.159797] ACPI Error: Method parse/execution
-klog failed [_SB_._OSC] (Node f4421648), AE_NOT_FOUND (20110413
-klog /psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.159797] ACPI Error: Method parse
+klog /execution failed [_SB_._OSC] (Node f4421648),
+klog AE_NOT_FOUND (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.160246] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.LPC0.EC0_._REG] (Node ffff880147830960),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.160246] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
+klog ffff880147830960), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.160246] ACPI Error: [_SB_.PHSR] Namespace
-klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.160246] ACPI Error: [_SB_.PHSR]
+klog Namespace lookup failure, AE_NOT_FOUND (20110112
+klog /psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
klog FAILED [MEDIUM] KlogBiosMtrrsInconsistentAcrossCPUs: Test
klog 1, MEDIUM Kernel message: [ 0.160449] mtrr: your CPUs had
@@ -3356,41 +3454,46 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.165683] ACPI Error: [CDW1] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.165683] ACPI Error: [CDW1] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.165689] ACPI Error: Method parse/execution
-klog failed [_SB_._OSC] (Node f3821648), AE_NOT_FOUND (20110112
-klog /psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.165689] ACPI Error: Method parse
+klog /execution failed [_SB_._OSC] (Node f3821648),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.166264] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_._OSC] (Node f701a648),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.166264] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_._OSC] (Node f701a648),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.166294] ACPI Error: Method parse/execution
-klog failed [_SB_._OSC] (Node f4021648), AE_NOT_FOUND (20110112
-klog /psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.166294] ACPI Error: Method parse
+klog /execution failed [_SB_._OSC] (Node f4021648),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.166323] ACPI Error: No handler for
@@ -3401,14 +3504,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.166336] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
klog (Node f7021bb8), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.166808] ACPI Error: No handler for
@@ -3419,41 +3524,46 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.166808] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.HTEV] (Node f701be10),
klog AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.166808] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
klog (Node f7024d08), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.169111] ACPI Error: [HPTF] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.169111] ACPI Error: [HPTF] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.169117] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.HPET._STA] (Node f402ae58), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.169117] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.HPET._STA] (Node f402ae58),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.169362] ACPI Warning: Incorrect
@@ -3473,14 +3583,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.170000] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a06440),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.170000] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a06440),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
klog 1, HIGH Kernel message: [ 0.170000] ACPI Warning: Package
@@ -3517,14 +3629,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.171916] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f700e3d8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.172406] ACPI Warning: Incorrect
@@ -3569,14 +3683,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.172880] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
klog (Node f70159f0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.173062] ACPI Warning: Incorrect
@@ -3587,14 +3703,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.173605] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f70215e8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.173745] ACPI Warning: Incorrect
@@ -3605,22 +3723,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.173917] ACPI Error (psparse-0537):
klog Method parse/execution failed [] (Node c08d6804),
klog AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.173917] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c08d6804), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.173917] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c08d6804),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.175144] ACPI Warning: Incorrect
@@ -3640,23 +3763,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.175394] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU0._OSC] (Node
klog f7025558), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.175428] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU0._PDC] (Node
klog f7025540), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
klog 1, HIGH Kernel message: [ 0.175892] ACPI Warning: Package
@@ -3684,14 +3811,13 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.176410] ACPI Error: [RAMB] Namespace lookup
-klog failure, AE_NOT_FOUND (20110413/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.176410] ACPI Error: [RAMB] Namespace
+klog lookup failure, AE_NOT_FOUND (20110413/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.176680] ACPI Warning: Incorrect
@@ -3736,14 +3862,16 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.177377] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7022dc8),
-klog AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.177377] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7022dc8), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.177506] ACPI Warning: Incorrect
@@ -3781,14 +3909,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.178434] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D0._STA] (Node
klog f7072000), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.178458] ACPI Error (uteval-0250):
@@ -3799,14 +3929,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.178486] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D1._STA] (Node
klog f70720a8), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.178510] ACPI Error (uteval-0250):
@@ -3817,14 +3949,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.178539] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D0._STA] (Node
klog f7072210), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.178563] ACPI Error (uteval-0250):
@@ -3835,14 +3969,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.178590] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D1._STA] (Node
klog f70722b8), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.178614] ACPI Error (uteval-0250):
@@ -3862,32 +3998,38 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.179688] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f74174c8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.181591] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7022db0),
-klog AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.181591] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7022db0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.181679] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f740f438), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.181959] ACPI Warning: Incorrect
@@ -3907,49 +4049,54 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.182199] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f4c25228), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.182199] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f4c25228),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.182199] ACPI Error: [Z012] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.182199] ACPI Error: [Z012] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.182639] ACPI Error (psargs-0359): [ECEN]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.182639] ACPI Error (psargs-0359):
+klog [ECEN] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.182645] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c090665c), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.182645] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c090665c),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.183306] ACPI Error: Method parse
klog /execution failed [_PR_.CPU0._PDC] (Node f403a228),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.183518] ACPI Warning: Incorrect
@@ -3969,14 +4116,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.183734] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D0._STA] (Node
klog f70c4180), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.183755] ACPI Error (uteval-0250):
@@ -3987,14 +4136,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.183773] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D1._STA] (Node
klog f70c4240), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.183793] ACPI Error (uteval-0250):
@@ -4005,14 +4156,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.183812] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D0._STA] (Node
klog f70c43c0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.183832] ACPI Error (uteval-0250):
@@ -4023,14 +4176,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.183850] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D1._STA] (Node
klog f70c4480), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.183870] ACPI Error (uteval-0250):
@@ -4059,48 +4214,57 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.184314] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7015eb8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.185673] ACPI Error (dswload-0659): [___P]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.185673] ACPI Error (dswload-0659):
+klog [___P] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.185686] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog f701a150), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.185688] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._INI] (Node f700f6c0),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.185688] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._INI] (Node
+klog f700f6c0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.185862] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
klog f701a1e0), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiPackageListLargerThanExpected: Test
klog 1, HIGH Kernel message: [ 0.186281] ACPI Warning: Package
@@ -4128,13 +4292,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.187800] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c0994f7c), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.187800] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c0994f7c),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.187872] ACPI Warning: Incorrect
@@ -4181,14 +4348,13 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.188487] ACPI Error (psargs-0359): q z
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.188487] ACPI Error (psargs-0359): q z
klog Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.188669] ACPI Warning: Incorrect
@@ -4206,14 +4372,16 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.189100] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7017dc8),
-klog AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.189100] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7017dc8), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
klog message: [ 0.189451] ACPI Error: Needed type [Reference],
@@ -4222,32 +4390,35 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.189466] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7016dc8),
-klog AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.189466] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7016dc8), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.189515] ACPI Error (psargs-0359): [CVCL]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.189515] ACPI Error (psargs-0359):
+klog [CVCL] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.189522] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.DIGI._STA] (Node
-klog f702a390), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.189522] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.DIGI._STA]
+klog (Node f702a390), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.191013] ACPI Warning: Incorrect
@@ -4267,13 +4438,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.191906] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c098ff6c), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.191906] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c098ff6c),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.192037] ACPI Warning: Incorrect
@@ -4292,14 +4466,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.192182] ACPI Error (psparse-0537):
klog Method parse/execution failed [] (Node c08ce7dc),
klog AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.192983] ACPI Warning: Incorrect
@@ -4310,13 +4486,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.193750] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c08ce7dc), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.193750] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c08ce7dc),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.194184] ACPI Warning: Incorrect
@@ -4336,21 +4515,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.194554] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1._PDC] (Node f5821150),
klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.194701] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2._PDC] (Node f58211e0),
klog AE_INVALID_TABLE_LENGTH (20110112/psparse-536)
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.194897] ACPI Warning: Incorrect
@@ -4406,14 +4591,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.197451] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.SBRG.EC__._REG]
klog (Node f701e2a0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.198490] ACPI Warning: Incorrect
@@ -4442,23 +4629,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.199465] ACPI Error: [CDW1] Namespace lookup
-klog failure, AE_NOT_FOUND (20110413/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.199465] ACPI Error: [CDW1] Namespace
+klog lookup failure, AE_NOT_FOUND (20110413/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.199471] ACPI Error: Method parse/execution
-klog failed [_SB_._OSC] (Node ffff880138e2ea78), AE_NOT_FOUND
-klog (20110413/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.199471] ACPI Error: Method parse
+klog /execution failed [_SB_._OSC] (Node ffff880138e2ea78),
+klog AE_NOT_FOUND (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.200426] ACPI Warning: Incorrect
@@ -4487,13 +4675,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.201466] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog f700e180), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.203079] ACPI Warning: Incorrect
@@ -4522,14 +4713,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.205365] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5422e88),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.206075] ACPI Warning: Incorrect
@@ -4558,14 +4751,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.209105] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f701f270),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.209105] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f701f270), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.210543] ACPI Warning: Incorrect
@@ -4612,23 +4807,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.211928] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701fd08), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.211938] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
klog (Node ee423708), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.212633] ACPI Warning: Incorrect
@@ -4639,14 +4838,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.212815] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f7424eb8), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.212815] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f7424eb8),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 0.213084] ACPI Error (dsfield-0143):
@@ -4656,14 +4857,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.213100] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7014ca8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.213771] ACPI Warning: Incorrect
@@ -4709,23 +4912,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.217060] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog dec13ca8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.217763] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7013030), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.217957] ACPI Warning: Incorrect
@@ -4736,23 +4943,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.218957] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701be88), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.219691] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7013270),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.219691] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7013270), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.219959] ACPI Error: No handler for
@@ -4771,14 +4982,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.219977] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D0._STA] (Node
klog f701ba38), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.220034] ACPI Error (uteval-0250):
@@ -4789,14 +5002,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.220068] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D1._STA] (Node
klog f701baf8), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.220107] ACPI Error (uteval-0250):
@@ -4807,14 +5022,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.220142] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D0._STA] (Node
klog f701bc78), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.220180] ACPI Error (uteval-0250):
@@ -4825,14 +5042,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.220213] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D1._STA] (Node
klog f701bd38), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.220252] ACPI Error (uteval-0250):
@@ -4843,23 +5062,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.221153] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.HPET._CRS] (Node f402ae70), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.221153] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.HPET._CRS] (Node f402ae70),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.221220] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.221220] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.RTC_._CRS] (Node f402aee8),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogBiosMtrrDefTypeIncosistent: Test 1,
klog MEDIUM Kernel message: [ 0.221945] mtrr: your CPUs had
@@ -4871,14 +5094,16 @@ klog consistently set across all CPUs which is a firmware bug.
klog The kernel has worked around this bug, but it may be worth
klog getting the BIOS vendor to fix this.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.222211] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701beb8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.222869] ACPI Warning: Incorrect
@@ -4898,13 +5123,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.222987] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
-klog f7015900), AE_AML_BUFFER_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.222987] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS]
+klog (Node f7015900), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.223020] ACPI Error (uteval-0250): Method
@@ -4941,14 +5169,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.224569] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701fca8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
klog CRITICAL Kernel message: [ 0.224987] ACPI Error: Field
@@ -4959,13 +5189,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.224994] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.MEM_._CRS] (Node f7021990),
-klog AE_AML_BUFFER_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.224994] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.MEM_._CRS] (Node
+klog f7021990), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.225018] ACPI Error (uteval-0250): Method
@@ -4993,23 +5226,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.228032] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.228032] ACPI Error (psargs-0359):
klog [_PR_.C002._PPC] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.228041] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
-klog f742a558), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.228041] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
+klog (Node f742a558), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
klog message: [ 0.228469] [Firmware Bug]: the BIOS has
@@ -5027,59 +5261,68 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.228773] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f4025450), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.228773] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f4025450),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.229334] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7020750), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.229639] ACPI Error (psargs-0359): [CDW1]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.229639] ACPI Error (psargs-0359):
+klog [CDW1] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.229644] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7413270),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.229644] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7413270), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.230075] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7014630), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.231134] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node f7012f00),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.231134] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
+klog f7012f00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.232350] ACPI Warning: Incorrect
@@ -5099,14 +5342,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.232733] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701ebd0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.232830] ACPI Warning: Incorrect
@@ -5162,14 +5407,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.236739] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f3c24f00), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.236739] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f3c24f00),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.241360] ACPI Warning: Incorrect
@@ -5216,15 +5463,15 @@ klog while executing ACPI AML. The error lists the ACPI driver
klog module and the line number where the bug has been caught
klog and the method that caused the error.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.245830] ACPI Error: Type returned from _PRT
-klog was incorrect: Integer, expected Btypes: 0x8 (20100428
-klog /uteval-313)
+klog FAILED [HIGH] KlogAcpiIncorrectReturnType: Test 1, HIGH
+klog Kernel message: [ 0.245830] ACPI Error: Type returned from
+klog _PRT was incorrect: Integer, expected Btypes: 0x8
+klog (20100428/uteval-313)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The ACPI interpreter was evaluating a namespace
+klog object and discovered that the return type did not match
+klog the expected return type. This is an ACPI AML bug in the
+klog ACPI DSDT or SSDTs.
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.246137] ACPI Warning: Incorrect
@@ -5244,41 +5491,49 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.249570] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._OSC] (Node
klog f7010198), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.249594] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog f7010180), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.249860] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._OSC] (Node
klog f7010270), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.249882] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
klog f7010258), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.250005] ACPI Error: No handler for
@@ -5297,41 +5552,49 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.250019] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.SBRG.EC__._REG] (Node
klog f4425bb8), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.250572] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7010e88), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.250864] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7013e58), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.250941] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4022e88),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
klog message: [ 0.250986] [Firmware Bug]: ACPI: BIOS
@@ -5350,23 +5613,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.254947] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f3c22e88),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.255884] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f70142b8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.256141] ACPI Warning: Incorrect
@@ -5395,14 +5662,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.262586] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701f390), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
klog message: [ 0.262663] pci 0000:00:1f.0: [Firmware Bug]:
@@ -5411,22 +5680,27 @@ klog
klog ADVICE: The kernel has detected a Firmware bug in the BIOS
klog or ACPI which needs investigating and fixing.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.264838] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701f2a0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.265119] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c08d5804), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.265119] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c08d5804),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.265541] ACPI Warning: Incorrect
@@ -5456,58 +5730,71 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with incorrectly typed data. The
klog offending method needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.268093] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c0927024), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.268093] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c0927024),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.268171] ACPI Error (psparse-0537):
klog Method parse/execution failed [] (Node c0927024),
klog AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.268458] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f70142a0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.269488] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.APCT] (Node
klog ffff88007af30560), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.269534] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1.GCAP] (Node
klog ffff88007af30540), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.269576] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog ffff88007af30500), AE_NO_MEMORY
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.272427] ACPI Error: No handler for
@@ -5518,14 +5805,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.272435] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D0._STA] (Node
klog f7102150), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.272452] ACPI Error (uteval-0250):
@@ -5536,14 +5825,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.272469] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D1._STA] (Node
klog f71021f8), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.272486] ACPI Error (uteval-0250):
@@ -5554,14 +5845,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.272503] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D0._STA] (Node
klog f7102360), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.272519] ACPI Error (uteval-0250):
@@ -5572,14 +5865,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.272536] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D1._STA] (Node
klog f7102408), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.272552] ACPI Error (uteval-0250):
@@ -5599,50 +5894,57 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.284552] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.284552] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
klog f7014858), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.284566] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM] (Node
-klog f7014798), AE_AML_PACKAGE_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.284566] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM]
+klog (Node f7014798), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.285468] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.285468] ACPI Error (psargs-0359):
klog [_PR_.CPU0._PPC] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.285476] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.ADP0.ADJP] (Node f7015b10),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.285476] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.ADP0.ADJP] (Node
+klog f7015b10), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.285546] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.ADP0._PSR] (Node f7015ae0),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.285546] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.ADP0._PSR] (Node
+klog f7015ae0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.288180] ACPI Warning: Incorrect
@@ -5653,23 +5955,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.288591] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701fd50), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.288966] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f34245b8), AE_NOT_FOUND
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.288966] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f34245b8),
+klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [CRITICAL] KlogAcpiCrtInvalidThreshold: Test 1,
klog CRITICAL Kernel message: [ 0.296054] [Firmware Bug]:
@@ -5679,68 +5985,79 @@ klog ADVICE: ACPI _CRT (Critical Trip Point) is returning a
klog threshold lower than zero degrees Celsius which is clearly
klog incorrect.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.296149] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701eca8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.296644] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_._OSC] (Node ffff88012fc16660)
-klog , AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.296644] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_._OSC] (Node
+klog ffff88012fc16660), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.302946] ACPI Error (psargs-0359): [HPTF]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.302946] ACPI Error (psargs-0359):
+klog [HPTF] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.302952] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.HPET._STA] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.302952] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.HPET._STA] (Node
klog ffff88007db32200), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.307009] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4c22e88),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.307757] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
-klog f74145a0), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.307757] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
+klog (Node f74145a0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.307837] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
-klog f7414690), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.307837] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
+klog (Node f7414690), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.308095] ACPI Warning: Incorrect
@@ -5751,23 +6068,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.308151] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
-klog f7414cd8), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.308151] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
+klog (Node f7414cd8), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.308213] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
-klog f7414dc8), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.308213] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
+klog (Node f7414dc8), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
klog message: [ 0.310609] ACPI Warning for _PR_.CPU1._PSS:
@@ -5786,23 +6107,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.311025] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.311041] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f54250d8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
klog message: [ 0.311335] ACPI Warning for _PR_.CPU2._PSS:
@@ -5837,14 +6162,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.314451] ACPI Error (psparse-0537):
klog Method parse/execution failed [] (Node ffffffff81a2b040),
klog AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.314603] ACPI Warning: Incorrect
@@ -5892,23 +6219,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.316829] ACPI Error: Method parse
klog /execution failed [_SB_.HTEV] (Node ffff88007a730780),
klog AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.316839] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
klog ffff88007a73a078), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.317152] ACPI Warning: Incorrect
@@ -5919,14 +6250,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.317427] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog ffff88007d735160), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.317685] ACPI Warning: Incorrect
@@ -5946,14 +6279,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.321587] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a12040),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.321587] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a12040),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
klog message: [ 0.321722] ACPI Error: Needed type [Reference],
@@ -5962,14 +6297,16 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.321740] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.321740] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff880075532ba0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.322869] ACPI Error: No handler for
@@ -5980,23 +6317,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.322886] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
klog f7435228), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.322899] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
klog f7428d98), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.323465] ACPI Warning: Incorrect
@@ -6024,41 +6365,49 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.325334] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.KBC0.SMWR]
klog (Node ffff88007d32c8c0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.325357] ACPI Error (psparse-0537):
klog Method parse/execution failed [_TZ_.THRM.SFAN] (Node
klog ffff88007d328ec0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.325376] ACPI Error (psparse-0537):
klog Method parse/execution failed [_TZ_.THRM.THCK] (Node
klog ffff88007d328f40), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.325396] ACPI Error (psparse-0537):
klog Method parse/execution failed [_GPE._L02] (Node
klog ffff88007d3289c0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
klog Kernel message: [ 0.325630] ACPI Error: Could not enable
@@ -6110,14 +6459,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.329378] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88012b63d760), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.330000] ACPI Warning: Incorrect
@@ -6155,14 +6506,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.330496] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D0._STA] (Node
klog ffff88011bf0d360), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.330513] ACPI Error (uteval-0250):
@@ -6173,14 +6526,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.330528] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D1._STA] (Node
klog ffff88011bf0d460), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.330545] ACPI Error (uteval-0250):
@@ -6191,14 +6546,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.330560] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D0._STA] (Node
klog ffff88011bf0d660), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.330576] ACPI Error (uteval-0250):
@@ -6209,14 +6566,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.330590] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D1._STA] (Node
klog ffff88011bf0d760), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.330606] ACPI Error (uteval-0250):
@@ -6227,14 +6586,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.330759] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88011763c000), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.330793] ACPI Warning: Incorrect
@@ -6252,14 +6613,16 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.331653] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.331653] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88014b83cac0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededReference: Test 1, HIGH Kernel
klog message: [ 0.331820] ACPI Error: Needed type [Reference],
@@ -6268,14 +6631,16 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.331838] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.331838] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff8800379bbba0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.331948] ACPI Warning: Incorrect
@@ -6286,23 +6651,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.332160] ACPI Error (dswload-0677): [PCI0]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.332160] ACPI Error (dswload-0677):
+klog [PCI0] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.332167] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81cf5eb0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.332167] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81cf5eb0),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.333155] ACPI Warning: Incorrect
@@ -6322,23 +6688,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.333300] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.HTEV] (Node
klog ffff8800bc62e600), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.333326] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
klog (Node ffff8800bc63e9a0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.333559] ACPI Error: No handler for
@@ -6349,14 +6719,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.333573] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.HTEV] (Node
klog ffff88007db28600), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.333591] ACPI Warning: Incorrect
@@ -6367,14 +6739,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.333601] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
klog (Node ffff88007db309a0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
klog HIGH Kernel message: [ 0.333734] ACPI Warning for
@@ -6385,50 +6759,57 @@ klog ADVICE: The ACPI Method was executing with a different
klog number of parameters than the Method expected. This should
klog be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.333765] ACPI Error (psargs-0359): [FZHD]
-klog Namespace lookup failure, AE_NOT_FOUND
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.333771] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
-klog f7014300), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.333853] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
-klog f70143f0), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.334143] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
-klog f7014a38), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.334206] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
-klog f7014b28), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.333765] ACPI Error (psargs-0359):
+klog [FZHD] Namespace lookup failure, AE_NOT_FOUND
+klog
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.333771] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
+klog (Node f7014300), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.333853] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
+klog (Node f70143f0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.334143] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
+klog (Node f7014a38), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.334206] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
+klog (Node f7014b28), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.335658] ACPI Error: No handler for
@@ -6439,14 +6820,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.335698] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
klog ffff88007af36730), AE_NOT_EXIST (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.335745] ACPI Warning: Incorrect
@@ -6466,41 +6849,46 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.337513] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f54243f0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.337662] ACPI Error (psargs-0359): [URES]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.337662] ACPI Error (psargs-0359):
+klog [URES] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.337662] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PSW] (Node f701f0a8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.337662] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PSW] (Node f701f0a8),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.338155] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88021302db60), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.338440] ACPI Error: No handler for
@@ -6511,14 +6899,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.338717] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D0._STA] (Node
klog ffff88012bb111a0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.338801] ACPI Warning: Incorrect
@@ -6538,14 +6928,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.339363] ACPI Error (psparse-0537):
klog Method parse/execution failed [PRID.P_D1._STA] (Node
klog ffff88012bb11280), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.339551] ACPI Error (uteval-0250):
@@ -6583,14 +6975,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.340003] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D0._STA] (Node
klog ffff88012bb11460), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.340121] ACPI Warning: Incorrect
@@ -6610,14 +7004,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.340651] ACPI Error (psparse-0537):
klog Method parse/execution failed [SECD.S_D1._STA] (Node
klog ffff88012bb11540), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 0.340838] ACPI Error (uteval-0250):
@@ -6646,59 +7042,71 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.341812] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._OSC] (Node
klog ffff88017bc14660), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.341843] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog ffff88017bc14640), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.342116] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
klog (Node f742f228), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.342130] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._OSC] (Node
klog ffff88017bc14780), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.342160] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
klog ffff88017bc14760), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.342409] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
klog (Node f7422d98), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.342985] ACPI Warning: Incorrect
@@ -6845,14 +7253,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.353215] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.SBRG.EC0_._REG]
klog (Node ffff88013be520e0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.353356] ACPI Warning: Incorrect
@@ -6888,23 +7298,27 @@ klog
klog ADVICE: An ACPI Method has returned an Device type when a
klog Reference type was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 0.353652] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.353652] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff8800379bba80), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.355135] ACPI Error: Method parse
klog /execution failed [_PR_.CPU0._PDC] (Node ffff88007a738ca8)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
klog message: [ 0.355798] ACPI Error: ACPI path has too many
@@ -6916,15 +7330,12 @@ klog while executing ACPI AML. The error lists the ACPI driver
klog module and the line number where the bug has been caught
klog and the method that caused the error.
klog
-klog FAILED [HIGH] KlogBiosTimerNotConnectedtoIoApic: Test 1,
+klog FAILED [HIGH] KlogIoApic8254TimerNotConnected: Test 1,
klog HIGH Kernel message: [ 0.356001] ..MP-BIOS bug: 8254 timer
klog not connected to IO-APIC
klog
-klog ADVICE: The BIOS is reporting the ExtINTA I/O APIC input
-klog from the cascaded 8259A as the timer interrupt input. The
-klog kernel has detected just one pin, so it has to check the
-klog timer directly and through the 8259A because of the broken
-klog BIOS reporting.
+klog ADVICE: The 8254 timer is not connected to an IO-APIC,
+klog this is invariably due to a misconfiguration in the BIOS.
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.356108] ACPI Error: No handler for
@@ -6943,23 +7354,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.356119] ACPI Error (psparse-0537):
klog Method parse/execution failed [P8XH] (Node
klog ffff88013ba28020), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.356143] ACPI Error (psparse-0537):
klog Method parse/execution failed [_GPE._L02] (Node
klog ffff88013ba32120), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.356280] ACPI Warning: Incorrect
@@ -7006,14 +7421,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.359183] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7021a68), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.359915] ACPI Warning: Incorrect
@@ -7043,22 +7460,27 @@ klog while executing ACPI AML. The error lists the ACPI driver
klog module and the line number where the bug has been caught
klog and the method that caused the error.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.362481] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c091bffc), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.362481] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c091bffc),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.362557] ACPI Error (psparse-0537):
klog Method parse/execution failed [] (Node c091bffc),
klog AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 0.362606] ACPI Error (dsfield-0487):
@@ -7068,14 +7490,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.362751] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f40255d0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiFirmwareError: Test 1, HIGH Kernel
klog message: [ 0.362859] [Firmware Bug]: ACPI: BIOS
@@ -7093,23 +7517,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.362886] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7014a80), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.363488] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog ffff880227048f60), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.363621] ACPI Warning: Incorrect
@@ -7147,14 +7575,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.364521] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f44285b8),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.366917] ACPI Warning: Incorrect
@@ -7219,23 +7649,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.372475] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5426ca8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.372684] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node dd825ca8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.375383] ACPI Warning: Incorrect
@@ -7246,39 +7680,46 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.375585] ACPI Error (dswload-0677): [USB0]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.375585] ACPI Error (dswload-0677):
+klog [USB0] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.375609] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c09fb6c8), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.375609] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c09fb6c8),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.375966] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node c0992f7c), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.375966] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node c0992f7c),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.376047] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node dd825ca8),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 0.376092] ACPI Error: No handler for
@@ -7289,32 +7730,38 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.376106] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU0._OSC] (Node
klog ffff88007cf3f440), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.376141] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU0._PDC] (Node
klog ffff88007cf3f420), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.376733] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5026ca8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.378931] ACPI Warning: Incorrect
@@ -7343,14 +7790,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.381039] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7016a38), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.381211] ACPI Warning: Incorrect
@@ -7370,14 +7819,16 @@ klog ADVICE: It appears that PCI config space has been
klog configured for a specific device but does not appear to be
klog reserved by the ACPI motherboard resources.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.382740] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_._OSC] (Node ffff88003f013ca0)
-klog , AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.382740] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_._OSC] (Node
+klog ffff88003f013ca0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.383518] ACPI Warning: Incorrect
@@ -7397,23 +7848,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.384722] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.HPET._CRS] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.384722] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.HPET._CRS] (Node
klog ffff88007db32220), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.384811] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.384811] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.RTC_._CRS] (Node
klog ffff88007db322c0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.385777] ACPI Warning: Incorrect
@@ -7442,23 +7897,25 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.390341] ACPI Error: [GUR_._BAS] Namespace
-klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.390341] ACPI Error: [GUR_._BAS]
+klog Namespace lookup failure, AE_NOT_FOUND (20110112
+klog /psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.390354] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.MBIO._CRS] (Node ffff880078f30aa0),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.390354] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.MBIO._CRS] (Node
+klog ffff880078f30aa0), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
klog MEDIUM Kernel message: [ 0.390975] [Firmware Bug]: PCI:
@@ -7478,14 +7935,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.395834] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.395834] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88013ba393a0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiInvalidPssFrequency: Test 1,
klog MEDIUM Kernel message: [ 0.396197] [Firmware Bug]: ACPI:
@@ -7540,13 +7999,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.399996] ACPI Error: Method parse/execution
-klog failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000),
-klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.399996] ACPI Error: Method parse
+klog /execution failed [_SB_.MEM_._CRS] (Node ffff8800b8e38000)
+klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.400012] ACPI Error: Method execution failed
@@ -7583,23 +8045,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.406016] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.ADP0.ADJP] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.406016] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.ADP0.ADJP] (Node
klog ffff88013ba3c5a0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.406038] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.ADP0._PSR] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.406038] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.ADP0._PSR] (Node
klog ffff88013ba3c560), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.407719] ACPI Warning: Incorrect
@@ -7610,14 +8076,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.408529] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4c285b8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.414781] ACPI Warning: Incorrect
@@ -7655,14 +8123,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.420218] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88022b749b18)
klog , AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
klog CRITICAL Kernel message: [ 0.420241] ACPI Error: Field
@@ -7673,13 +8143,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.420248] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS] (Node
-klog ffff88013142fac0), AE_AML_BUFFER_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.420248] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.PMIO._CRS]
+klog (Node ffff88013142fac0), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.420284] ACPI Error (uteval-0250): Method
@@ -7715,32 +8188,35 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.426823] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.426823] ACPI Error (psargs-0359):
klog [_PR_.CPU0._PSS] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.426833] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.AC__.ADJP] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.426833] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__.ADJP] (Node
klog ffff88007b32ee00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.426872] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.AC__._PSR] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.426872] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
klog ffff88007b32edc0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
klog message: [ 0.429245] ACPI Warning for _PR_.CPU0._TSD:
@@ -7767,14 +8243,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.436921] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.436921] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88013b62ccc0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.438019] ACPI Warning: Incorrect
@@ -7803,41 +8281,46 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.444897] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4c252a0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.450562] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node ffff8800b8e33ca8),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.450562] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node ffff8800b8e33ca8)
+klog , AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.451517] ACPI Error (psargs-0359): [GUR_._BAS]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.451517] ACPI Error (psargs-0359):
+klog [GUR_._BAS] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.451682] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.451682] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.MBIO._CRS] (Node
klog ffff88007bb2a880), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
klog HIGH Kernel message: [ 0.453111] ACPI Warning for
@@ -7902,14 +8385,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.461793] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003cdb0f00)
klog , AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.462573] ACPI Warning: Incorrect
@@ -7920,59 +8405,71 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.468216] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._CST] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.468216] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._CST] (Node
klog ffff88007c5cc380), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.468859] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88003f1afdc0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.475076] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
-klog f701eb28), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.475159] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
-klog f701ec18), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.475441] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
-klog f70202a0), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.475506] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
-klog f7020390), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.475076] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.CHN0._GTM]
+klog (Node f701eb28), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.475159] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.CHN1._GTM]
+klog (Node f701ec18), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.475441] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT1.CHN0._GTM]
+klog (Node f70202a0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.475506] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT1.CHN1._GTM]
+klog (Node f7020390), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.479385] ACPI Warning: Incorrect
@@ -7983,41 +8480,49 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.479821] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f3c28a68),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.481067] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4028a68),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.482955] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9b0f00)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.484974] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f3c28a68),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
klog HIGH Kernel message: [ 0.485955] ACPI Warning: For
@@ -8074,14 +8579,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.492569] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a08440),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.492569] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a08440),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 0.492648] ACPI Error (dswload-0781):
@@ -8091,23 +8598,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.492655] ACPI Error (psparse-0537):
klog Method parse/execution failed [] (Node ffffffff81a08440),
klog AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.492811] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5428a68),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.494198] ACPI Warning: Incorrect
@@ -8163,50 +8674,60 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.500043] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
-klog ffff8800ac22d040), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.500043] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
+klog (Node ffff8800ac22d040), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.501138] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f3c28a38),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.505041] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4028a38),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.513609] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5428a38),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.516158] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f74296c0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.526190] ACPI Warning
@@ -8217,23 +8738,27 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.527455] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5422df8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.533028] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9b0bb8)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.534826] ACPI Warning: Incorrect
@@ -8262,69 +8787,80 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.539149] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPCB.SNC_.SBRT] (Node
klog ffff88012fa4f398), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.539161] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
klog ffff88012fa396b8), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.540036] ACPI Error: [_PR_.C002._PPC]
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.540036] ACPI Error: [_PR_.C002._PPC]
klog Namespace lookup failure, AE_NOT_FOUND (20110112
klog /psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.540046] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.LPC0.EC0_._REG] (Node ffff880107e623c0),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.540046] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
+klog ffff880107e623c0), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.541238] ACPI Error: Method parse/execution
-klog failed [_TZ_.C2E8] (Node f482d108), AE_AML_PACKAGE_LIMIT
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.541238] ACPI Error: Method parse
+klog /execution failed [_TZ_.C2E8] (Node f482d108),
+klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.541258] ACPI Error: Method parse/execution
-klog failed [_TZ_.C2E7] (Node f482d0f0), AE_AML_PACKAGE_LIMIT
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.541258] ACPI Error: Method parse
+klog /execution failed [_TZ_.C2E7] (Node f482d0f0),
+klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.541277] ACPI Error: Method parse/execution
-klog failed [_TZ_.TZ2_._TMP] (Node f482d7c8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.541277] ACPI Error: Method parse
+klog /execution failed [_TZ_.TZ2_._TMP] (Node f482d7c8),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.548650] ACPI Warning: Incorrect
@@ -8344,14 +8880,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.563415] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9af848)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 0.566332] ACPI Warning: For
@@ -8407,13 +8945,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.591729] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.MEM_._CRS] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.591729] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.MEM_._CRS] (Node
klog ffff8800b4040f60), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.591760] ACPI Error (uteval-0250): Method
@@ -8423,50 +8964,60 @@ klog
klog ADVICE: Method failed: ResourceSourceIndex is present but
klog ResourceSource is not.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.593045] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node f702c7b0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.593045] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node f702c7b0),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.593072] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node f7019648),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.593072] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node f7019648),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.593095] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node f702ea08),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.593095] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node f702ea08),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.593119] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node f702e9c0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.593119] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node f702e9c0),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.593142] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog f702e678), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.593142] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node f702e678), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiConvertedBufferToString: Test 1,
klog HIGH Kernel message: [ 0.597675] ACPI Warning for
@@ -8508,23 +9059,24 @@ klog type and ACPI driver automatically converted it to a
klog String. It is worth fixing this in the DSDT or SSDT even
klog if the kernel fixes it at run time.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.600451] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.600451] ACPI Error (psargs-0359):
klog [_SB_.PCI0.EGBA] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.600456] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC_.MBRD._CRS] (Node
-klog f7416318), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.600456] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC_.MBRD._CRS]
+klog (Node f7416318), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.612305] ACPI Warning: Incorrect
@@ -8543,14 +9095,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.612820] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88003d9ae190)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.614155] ACPI Warning: Incorrect
@@ -8571,50 +9125,60 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with incorrectly typed data. The
klog offending method needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.621415] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node f702c828),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.621415] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node f702c828),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.621443] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node f7019ed0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.621443] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node f7019ed0),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.621468] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node f702ea98),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.621468] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node f702ea98),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.621493] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node f702ea50),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.621493] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node f702ea50),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.621518] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog f702e708), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.621518] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node f702e708), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiMmconfigNotReserved: Test 1,
klog MEDIUM Kernel message: [ 0.625680] [Firmware Bug]: PCI:
@@ -8625,24 +9189,25 @@ klog ADVICE: It appears that PCI config space has been
klog configured for a specific device but does not appear to be
klog reserved by the ACPI motherboard resources.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.627242] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.627242] ACPI Error (psargs-0359):
klog [_SB_.PCI0.EC__.HOTT] Namespace lookup failure,
klog AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.627255] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_TZ_.TZ01._HOT] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.627255] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_TZ_.TZ01._HOT] (Node
klog ffff88013ba3ae60), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.628646] ACPI Warning: Incorrect
@@ -8662,14 +9227,16 @@ klog to be invalid. This normally indicates that the ERST table
klog header size is too small, or the table size (excluding
klog header) is not a multiple of the ERST entries.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.630258] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88007af370a0)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.641157] ACPI Warning: Incorrect
@@ -8698,41 +9265,49 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.651383] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_._OSC] (Node ffff88007f416680)
-klog , AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.651383] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_._OSC] (Node
+klog ffff88007f416680), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.652133] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a2e040),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.652133] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a2e040),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.652695] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a0f040),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.652695] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a0f040),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.653163] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff88007ab2f460)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.653985] ACPI Warning: Incorrect
@@ -8743,68 +9318,78 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.654642] ACPI Error: Method parse
klog /execution failed [_PR_.CPU1._PDC] (Node ffff88020f44deb0)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.654994] ACPI Error: Method parse
klog /execution failed [_PR_.CPU2._PDC] (Node ffff88020f44df50)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.655350] ACPI Error: Method parse
klog /execution failed [_PR_.CPU3._PDC] (Node ffff88020f454000)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.655369] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.655369] ACPI Error (psargs-0359):
klog [_SB_.PCI0.PSKB] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.655376] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.SIO_.KBC0._STA]
-klog (Node ffff880236c47260), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.655376] ACPI Error (psparse-0537):
+klog Method parse/execution failed
+klog [_SB_.PCI0.LPC0.SIO_.KBC0._STA] (Node ffff880236c47260),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.655576] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.655576] ACPI Error (psargs-0359):
klog [_SB_.PCI0.PSMS] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.655581] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.SIO_.MSE0._STA]
-klog (Node ffff880236c47340), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.655581] ACPI Error (psparse-0537):
+klog Method parse/execution failed
+klog [_SB_.PCI0.LPC0.SIO_.MSE0._STA] (Node ffff880236c47340),
+klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.656750] ACPI Warning: Incorrect
@@ -8823,23 +9408,27 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.658697] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88023fc14aa0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.662008] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a0c440),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.662008] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a0c440),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiCrsSecondaryBusRangeMissing: Test
klog 1, MEDIUM Kernel message: [ 0.663194] [Firmware Bug]: ACPI
@@ -8920,23 +9509,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.674938] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
klog f3829120), AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.674963] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node
klog f3829330), AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.675162] ACPI Warning: Incorrect
@@ -9012,14 +9605,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.695029] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a0e440),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.695029] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a0e440),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.695887] ACPI Warning: Incorrect
@@ -9081,32 +9676,38 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.710267] ACPI Error: Method parse/execution
-klog failed [_TZ_.PSWT] (Node f7424bb8), AE_AML_PACKAGE_LIMIT
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.710267] ACPI Error: Method parse
+klog /execution failed [_TZ_.PSWT] (Node f7424bb8),
+klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.710275] ACPI Error: Method parse/execution
-klog failed [_TZ_.GTTP] (Node f7424b88), AE_AML_PACKAGE_LIMIT
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.710275] ACPI Error: Method parse
+klog /execution failed [_TZ_.GTTP] (Node f7424b88),
+klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.710281] ACPI Error: Method parse/execution
-klog failed [_TZ_.GFXZ._TMP] (Node f74249a8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.710281] ACPI Error: Method parse
+klog /execution failed [_TZ_.GFXZ._TMP] (Node f74249a8),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.710890] ACPI Warning: Incorrect
@@ -9117,14 +9718,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.712727] ACPI Error: Method parse/execution
-klog failed [_TZ_.DTSZ._TMP] (Node f7424ca8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.712727] ACPI Error: Method parse
+klog /execution failed [_TZ_.DTSZ._TMP] (Node f7424ca8),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.715065] ACPI Warning: Incorrect
@@ -9162,23 +9765,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.721822] ACPI Error (dswload-0659): [USB0]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.721822] ACPI Error (dswload-0659):
+klog [USB0] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.722199] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a4d180),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.722199] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a4d180),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
klog Kernel message: [ 0.725417] ACPI Warning for
@@ -9226,14 +9830,16 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.743273] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f701f0d8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 0.743525] ACPI Error: [CAPD] Namespace
@@ -9243,14 +9849,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.743530] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f50273d8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiParameterCountMistmatch: Test 1,
klog HIGH Kernel message: [ 0.743538] ACPI Warning: For
@@ -9270,13 +9878,16 @@ klog ADVICE: The field exceeds the allocated buffer size. This
klog can lead to unexpected results when fetching data outside
klog this region.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 0.744114] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.MEM_._CRS] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.744114] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.MEM_._CRS] (Node
klog ffff88013ba44cc0), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
klog message: [ 0.744142] ACPI Error (uteval-0250): Method
@@ -9295,14 +9906,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.772223] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f4c250d8),
klog AE_ALREADY_EXISTS (20101013/psparse-537)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.775831] ACPI Warning: Incorrect
@@ -9358,14 +9971,13 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.782613] ACPI Error (psargs-0359): [RAMB]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.782613] ACPI Error (psargs-0359):
+klog [RAMB] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.783246] ACPI Warning: Incorrect
@@ -9423,25 +10035,29 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.790513] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
klog ffff880079f39f78), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.790526] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC_.EC__.BAT0._BIF] (Node
klog ffff880079f37118), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.791560] ACPI Warning: Incorrect
@@ -9487,68 +10103,73 @@ klog to display adapter) is defined but we should also have
klog _DOS (Enable/Disable output switching) defined but it's
klog been omitted. This can cause display switching issues.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.810687] ACPI Error (dswload-0659): [DD02]
-klog Namespace lookup failure, AE_NOT_FOUND
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.810756] ACPI Error (dswload-0659): [EHC1]
-klog Namespace lookup failure, AE_NOT_FOUND
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.820565] ACPI Error: [FZHD] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.820571] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff880127632b40),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.820632] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff880127632cd0),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.810687] ACPI Error (dswload-0659):
+klog [DD02] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.821065] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff880127634758),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.810756] ACPI Error (dswload-0659):
+klog [EHC1] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.821112] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff8801276348e8),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.820565] ACPI Error: [FZHD] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.820571] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
+klog ffff880127632b40), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.820632] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
+klog ffff880127632cd0), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.821065] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
+klog ffff880127634758), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.821112] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
+klog ffff8801276348e8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 0.822836] ACPI Warning: For
@@ -9568,59 +10189,71 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.860349] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node ffff88023704ea40)
-klog , AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.860349] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node
+klog ffff88023704ea40), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.860380] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node ffff8802370590e0),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.860380] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node
+klog ffff8802370590e0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.860410] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node ffff8802370522a0),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.860410] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node
+klog ffff8802370522a0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.860439] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node ffff880237052240),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.860439] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node
+klog ffff880237052240), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.860468] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog ffff880237050de0), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.860468] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node ffff880237050de0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.870147] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0._OSC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.870147] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog ffff88013ba29e80), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.872036] ACPI Warning: Incorrect
@@ -9658,23 +10291,24 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 0.879606] ACPI Error (psargs-0359): [MPEN]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 0.879606] ACPI Error (psargs-0359):
+klog [MPEN] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.879794] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_TZ_.TZ00._PSL] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.879794] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_TZ_.TZ00._PSL] (Node
klog ffff88015ba4de00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
klog HIGH Kernel message: [ 0.888177] ACPI Warning for
@@ -9703,68 +10337,82 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.890421] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.SNC_.SBRT]
klog (Node ffff880133a49620), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.890696] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
klog (Node ffff880133a385e0), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.892097] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node ffff88021704e920)
-klog , AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.892124] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node ffff880217056700),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.892147] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node ffff880217052180),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.892171] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node ffff880217052120),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.892195] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog ffff880217050cc0), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.892097] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node
+klog ffff88021704e920), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.892124] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node
+klog ffff880217056700), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.892147] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node
+klog ffff880217052180), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.892171] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node
+klog ffff880217052120), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.892195] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node ffff880217050cc0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.892915] ACPI Warning: Incorrect
@@ -9784,113 +10432,137 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.900692] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node ffff88021704e960)
-klog , AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.900729] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node ffff880217059000),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.900753] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node ffff8802170521c0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.900776] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node ffff880217052160),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.900801] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog ffff880217050d00), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.905032] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node ffff88021304e940)
-klog , AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.905061] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node ffff8802130576a0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.905085] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node ffff8802130521a0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.905110] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node ffff880213052140),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.905135] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog ffff880213050ce0), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.905920] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.C000.C264] (Node f7024e58),
-klog AE_AML_PACKAGE_LIMIT
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 0.905985] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.C000._PSS] (Node f7024f30),
-klog AE_AML_PACKAGE_LIMIT
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.900692] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node
+klog ffff88021704e960), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.900729] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node
+klog ffff880217059000), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.900753] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node
+klog ffff8802170521c0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.900776] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node
+klog ffff880217052160), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.900801] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node ffff880217050d00), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905032] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node
+klog ffff88021304e940), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905061] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node
+klog ffff8802130576a0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905085] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node
+klog ffff8802130521a0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905110] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node
+klog ffff880213052140), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905135] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node ffff880213050ce0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905920] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.C000.C264] (Node
+klog f7024e58), AE_AML_PACKAGE_LIMIT
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.905985] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.C000._PSS] (Node
+klog f7024f30), AE_AML_PACKAGE_LIMIT
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiMissingPssPct: Test 1, HIGH Kernel
klog message: [ 0.906063] [Firmware Bug]: BIOS needs update for
@@ -9909,14 +10581,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 0.940948] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f7421fc0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 0.941821] ACPI Warning: Incorrect
@@ -9936,14 +10610,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.944156] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.944156] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
klog ffff88013384d720), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 0.967528] ACPI Warning for
@@ -9979,41 +10655,49 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 0.992685] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81cf6eb0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 0.992685] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81cf6eb0),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.004972] ACPI Error (psparse-0537): Method
-klog parse/execution failed [CPUT] (Node f701c150),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.004972] ACPI Error (psparse-0537):
+klog Method parse/execution failed [CPUT] (Node f701c150),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.005015] ACPI Error (psparse-0537): Method
-klog parse/execution failed [PSSC] (Node f701c168),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.005015] ACPI Error (psparse-0537):
+klog Method parse/execution failed [PSSC] (Node f701c168),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.005055] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
-klog f702f3c0), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.005055] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog (Node f702f3c0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.005834] ACPI Warning: Incorrect
@@ -10024,14 +10708,16 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.009421] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.009421] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.ACAD._PSR] (Node
klog f701aa98), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.020525] ACPI Warning: Incorrect
@@ -10085,14 +10771,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.027587] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.DOCK._STA] (Node
klog ffff880133e48620), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 1.027653] ACPI Error (uteval-0250):
@@ -10110,32 +10798,35 @@ klog
klog ADVICE: No valid ACPI _CRT (Critical Trip Point) was
klog found.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.158298] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_._OSC] (Node f701b648),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.158298] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_._OSC] (Node f701b648),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.167050] ACPI Error: [CDW1] Namespace lookup
-klog failure, AE_NOT_FOUND (20110316/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.167050] ACPI Error: [CDW1] Namespace
+klog lookup failure, AE_NOT_FOUND (20110316/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.167226] ACPI Error: Method parse/execution
-klog failed [_SB_._OSC] (Node f4422648), AE_NOT_FOUND (20110316
-klog /psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.167226] ACPI Error: Method parse
+klog /execution failed [_SB_._OSC] (Node f4422648),
+klog AE_NOT_FOUND (20110316/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.168945] ACPI Warning: Incorrect
@@ -10205,77 +10896,90 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.186079] ACPI Error: [BRTW] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.186079] ACPI Error: [BRTW] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.186087] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f4c2a588),
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.186087] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
+klog f4c2a588), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.187842] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog f7450168), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.187891] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0._PPC] (Node
+klog f74500c0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.188370] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._PPC] (Node
+klog f7450150), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.188776] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU2._PPC] (Node
+klog f74502b8), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.189190] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU3._PPC] (Node
+klog f7450258), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.196055] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0._OSC] (Node f3824270),
klog AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.187842] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0.PPC_] (Node f7450168),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.187891] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0._PPC] (Node f74500c0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.188370] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._PPC] (Node f7450150),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.188776] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU2._PPC] (Node f74502b8),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.189190] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU3._PPC] (Node f7450258),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.196055] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0._OSC] (Node f3824270), AE_NOT_FOUND
-klog (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 1.210593] ACPI Warning: For
@@ -10303,68 +11007,82 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.214761] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
klog f3023438), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.214775] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
klog f3023420), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.222641] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
klog f30235b8), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.222655] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
klog f30235a0), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 1.224060] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.BAT1._STA] (Node f7023b10),
-klog AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.228128] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG] (Node
-klog f702a570), AE_NOT_FOUND
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.224060] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.BAT1._STA] (Node
+klog f7023b10), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.228128] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._REG]
+klog (Node f702a570), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.229185] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0._OSC] (Node
klog f70140d8), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
klog message: [ 1.230869] ACPI Warning for _PR_.CPU0._PSS:
@@ -10416,50 +11134,60 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.246169] ACPI Error: Method parse
klog /execution failed [_TZ_.RDEC] (Node f442fc60),
klog AE_NOT_EXIST (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.246176] ACPI Error: Method parse
klog /execution failed [_TZ_.TZS0._TMP] (Node f442fca8),
klog AE_NOT_EXIST (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.270260] ACPI Error (psparse-0537): Method
-klog parse/execution failed [CPUT] (Node ffff880137a4e840),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.270297] ACPI Error (psparse-0537): Method
-klog parse/execution failed [PSSC] (Node ffff880137a4e860),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.270332] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
-klog ffff880137a3fd00), AE_NOT_FOUND
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.270260] ACPI Error (psparse-0537):
+klog Method parse/execution failed [CPUT] (Node
+klog ffff880137a4e840), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.270297] ACPI Error (psparse-0537):
+klog Method parse/execution failed [PSSC] (Node
+klog ffff880137a4e860), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.270332] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog (Node ffff880137a3fd00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 1.272398] ACPI Error: No handler for
@@ -10470,23 +11198,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.272407] ACPI Error: Method parse
klog /execution failed [_TZ_.RDEC] (Node f742fc60),
klog AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.272415] ACPI Error: Method parse
klog /execution failed [_TZ_.TZS0._TMP] (Node f742fca8),
klog AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 1.280955] ACPI Error: No handler for
@@ -10497,32 +11229,35 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.280965] ACPI Error (psparse-0537):
klog Method parse/execution failed [J380._STA] (Node
klog ffff88013712b380), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.314561] ACPI Error: [ECPU] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.314561] ACPI Error: [ECPU] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.314567] ACPI Error: Method parse/execution
-klog failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.314567] ACPI Error: Method parse
+klog /execution failed [_TZ_.TZ00._TMP] (Node ffff88011763ca28)
+klog , AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.320114] ACPI Warning: Incorrect
@@ -10573,23 +11308,24 @@ klog an 8 byte buffer of 2 x 32 DWORDs, however it appears that
klog the method is possibly trying to access data outside this
klog buffer. This is a bug in the _OSC method.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.381411] ACPI Error (psparse-0537): Method
-klog parse/execution failed [] (Node ffffffff81a2b040),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.381411] ACPI Error (psparse-0537):
+klog Method parse/execution failed [] (Node ffffffff81a2b040),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.381481] ACPI Error (dswload-0659): [PCI0]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.381481] ACPI Error (dswload-0659):
+klog [PCI0] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 1.384655] ACPI Error: Needed
@@ -10599,23 +11335,27 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 1.384672] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.384672] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
klog ffff88013ba4c020), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 1.384743] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
-klog ffff88013ba4d9c0), AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.384743] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM]
+klog (Node ffff88013ba4d9c0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 1.398000] [Firmware Bug]: ACPI(Z00P) defines
@@ -10645,23 +11385,27 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.400736] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
-klog f7018e58), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.400736] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
+klog (Node f7018e58), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.436671] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
-klog f7024e58), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.436671] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
+klog (Node f7024e58), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 1.462866] ACPI Warning:
@@ -10680,32 +11424,35 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.488986] ACPI Error (psargs-0359): [GTF0]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.488986] ACPI Error (psargs-0359):
+klog [GTF0] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.488991] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
-klog f702b708), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.488991] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._SDD]
+klog (Node f702b708), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.489034] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
-klog f702b720), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.489034] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT0.PRT0._GTF]
+klog (Node f702b720), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.505441] ACPI Warning: Incorrect
@@ -10796,32 +11543,38 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.555599] ACPI Error (psparse-0537): Method
-klog parse/execution failed [CPUT] (Node ffff8801b90590c0),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.555599] ACPI Error (psparse-0537):
+klog Method parse/execution failed [CPUT] (Node
+klog ffff8801b90590c0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.555652] ACPI Error (psparse-0537): Method
-klog parse/execution failed [PSSC] (Node ffff8801b90590e0),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.555652] ACPI Error (psparse-0537):
+klog Method parse/execution failed [PSSC] (Node
+klog ffff8801b90590e0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.555703] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
-klog ffff8801b903b6e0), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.555703] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog (Node ffff8801b903b6e0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.559068] ACPI Warning: Incorrect
@@ -10841,14 +11594,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.570624] ACPI Error (psparse-0537):
klog Method parse/execution failed [J380._STA] (Node
klog ffff8801b916ea40), AE_NOT_EXIST
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.586563] ACPI Warning: Incorrect
@@ -10885,77 +11640,87 @@ klog ADVICE: The ACPI video driver set the brightness level
klog using the ACPI control _BCM, however the level used was
klog not a known level (as returned by _BCL).
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.605465] ACPI Error: [RAMB] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.605465] ACPI Error: [RAMB] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.616034] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.616034] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0.PPC_] (Node
klog ffff88015334da00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.616243] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.616243] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0._PPC] (Node
klog ffff88015334d920), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.618281] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.618281] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._PPC] (Node
klog ffff88015334d9e0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.620164] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU2._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.620164] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU2._PPC] (Node
klog ffff88015334dbc0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.621081] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU3._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.621081] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU3._PPC] (Node
klog ffff88015334db40), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.648580] ACPI Error: [SMS_] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.648580] ACPI Error: [SMS_] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.648589] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f3429e58),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.648589] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
+klog f3429e58), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
klog Kernel message: [ 1.662849] ACPI Error (uteval-0250):
@@ -10974,14 +11739,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 1.678342] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.VGA_._DSM] (Node ffff88022f460190),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.678342] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.VGA_._DSM] (Node
+klog ffff88022f460190), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 1.678390] ACPI Error: Needed
@@ -10991,59 +11759,72 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 1.678412] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88022f464230),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.701482] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node ffff88022704e960)
-klog , AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.701521] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node ffff880227059000),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.701557] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node ffff8802270521c0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.701592] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node ffff880227052160),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.701628] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog ffff880227050d00), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.678412] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
+klog ffff88022f464230), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.701482] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node
+klog ffff88022704e960), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.701521] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node
+klog ffff880227059000), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.701557] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node
+klog ffff8802270521c0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.701592] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node
+klog ffff880227052160), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.701628] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node ffff880227050d00), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 1.739479] ACPI Warning: Incorrect
@@ -11054,59 +11835,71 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.761428] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
-klog ffff8800bc234d60), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.761428] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
+klog (Node ffff8800bc234d60), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.782803] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.782803] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0.PPC_] (Node
klog ffff8801d4d0ac60), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.783001] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.783001] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0._PPC] (Node
klog ffff8801d4d0ab80), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.784831] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.784831] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._PPC] (Node
klog ffff8801d4d0ac40), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.786497] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU2._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.786497] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU2._PPC] (Node
klog ffff8801d4d0ae20), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.787299] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU3._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.787299] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU3._PPC] (Node
klog ffff8801d4d0ada0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
klog HIGH Kernel message: [ 1.849787] ACPI Warning for
@@ -11126,115 +11919,136 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.861576] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC_.EC__.GBIF] (Node
klog ffff880232c509b0), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 1.861601] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.LPC_.EC__.BAT1._BIF] (Node
klog ffff880232c50d20), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 1.864413] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node f3025828),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.864413] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f3025828),
klog AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.893953] ACPI Error (psparse-0537): Method
-klog parse/execution failed [CPUT] (Node ffff8800b3c50000),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.894002] ACPI Error (psparse-0537): Method
-klog parse/execution failed [PSSC] (Node ffff8800b3c50020),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.894047] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
-klog ffff8800b3c49380), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.900224] ACPI Error: [NPSS] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.900238] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU0.PPC_] (Node ffff88014f9a5140),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.900254] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU0._PPC] (Node ffff88014f9a5028),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.900769] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU1._PPC] (Node ffff88014f9a5118),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.901001] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU2._PPC] (Node ffff88014f9a5370),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.893953] ACPI Error (psparse-0537):
+klog Method parse/execution failed [CPUT] (Node
+klog ffff8800b3c50000), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.894002] ACPI Error (psparse-0537):
+klog Method parse/execution failed [PSSC] (Node
+klog ffff8800b3c50020), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.894047] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog (Node ffff8800b3c49380), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.901211] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU3._PPC] (Node ffff88014f9a52d0),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.900224] ACPI Error: [NPSS] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.900238] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a5140)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.900254] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a5028)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.900769] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a5118)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.901001] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU2._PPC] (Node ffff88014f9a5370)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.901211] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU3._PPC] (Node ffff88014f9a52d0)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 1.905440] ACPI Warning: For
@@ -11245,32 +12059,35 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 1.907422] ACPI Error: [GTF0] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 1.907422] ACPI Error: [GTF0] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.907427] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3431a50),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.907427] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog f3431a50), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.907445] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3431a68),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.907445] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog f3431a68), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 1.911273] ACPI Warning for
@@ -11281,23 +12098,27 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 1.929855] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.929855] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.IDE1.GTM_] (Node
klog f7414858), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 1.929872] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM] (Node
-klog f7414798), AE_AML_PACKAGE_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.929872] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.IDE1.CHN1._GTM]
+klog (Node f7414798), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBadAmlCode: Test 1, HIGH Kernel
klog message: [ 1.958776] ACPI Warning for _PR_.CPU0._PSD:
@@ -11375,156 +12196,186 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with incorrectly typed data. The
klog offending method needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.962612] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.962612] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0.PPC_] (Node
klog ffff8801534e5dc0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.962811] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.962811] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0._PPC] (Node
klog ffff8801534e5ce0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.964620] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.964620] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._PPC] (Node
klog ffff8801534e5da0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.966282] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU2._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.966282] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU2._PPC] (Node
klog ffff8801534e5f80), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.967081] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU3._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.967081] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU3._PPC] (Node
klog ffff8801534e5f00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.974827] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog f3831a50), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 1.974846] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog f3831a68), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.001829] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PATA.GTM_] (Node f5423ba0),
+klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.974827] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831a50),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.001850] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PATA.CHN0._GTM] (Node
+klog f54239c0), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.002809] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PATA.CHN1._GTM] (Node
+klog f5423ac8), AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.006621] ACPI Error (psparse-0537):
+klog Method parse/execution failed [CPUT] (Node
+klog ffff8801b90570c0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.006671] ACPI Error (psparse-0537):
+klog Method parse/execution failed [PSSC] (Node
+klog ffff8801b90570e0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.006718] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG]
+klog (Node ffff8801b903fa80), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 1.974846] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831a68),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
+klog Kernel message: [ 2.022076] ACPI Error: Could not enable
+klog SleepButton event (20110112/evxfevnt-198)
klog
klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.001829] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PATA.GTM_] (Node f5423ba0),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
+klog Kernel message: [ 2.022090] ACPI Warning: Could not enable
+klog fixed event 0x3 (20110112/evxface-197)
klog
klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.001850] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PATA.CHN0._GTM] (Node f54239c0),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.033653] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog f6031468), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.002809] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PATA.CHN1._GTM] (Node f5423ac8),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.033670] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog f6031480), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.006621] ACPI Error (psparse-0537): Method
-klog parse/execution failed [CPUT] (Node ffff8801b90570c0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.006671] ACPI Error (psparse-0537): Method
-klog parse/execution failed [PSSC] (Node ffff8801b90570e0),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.006718] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._REG] (Node
-klog ffff8801b903fa80), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
-klog Kernel message: [ 2.022076] ACPI Error: Could not enable
-klog SleepButton event (20110112/evxfevnt-198)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiCannotEnableFixedEvent: Test 1, HIGH
-klog Kernel message: [ 2.022090] ACPI Warning: Could not enable
-klog fixed event 0x3 (20110112/evxface-197)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.033653] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f6031468),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.033670] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f6031480),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiInvalidPssFrequency: Test 1,
klog MEDIUM Kernel message: [ 2.039517] [Firmware Bug]: ACPI:
@@ -11553,104 +12404,123 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with incorrectly typed data. The
klog offending method needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.068617] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SATA.PRT0._SDD] (Node f3c29e58),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.068617] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
+klog f3c29e58), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 2.081502] ACPI Error (psargs-0359): [NPSS]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 2.081502] ACPI Error (psargs-0359):
+klog [NPSS] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.081508] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0.PPC_] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.081508] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0.PPC_] (Node
klog ffff8801534e5c20), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.081585] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU0._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.081585] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU0._PPC] (Node
klog ffff8801534e5b40), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.083171] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.083171] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._PPC] (Node
klog ffff8801534e5c00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.084838] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU2._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.084838] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU2._PPC] (Node
klog ffff8801534e5de0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.085644] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU3._PPC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.085644] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU3._PPC] (Node
klog ffff8801534e5d60), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.106307] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88023f45dca8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.106326] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88023f45dcd0),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.113330] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f74317b0),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.113367] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f74317c8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.106307] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog ffff88023f45dca8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.106326] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog ffff88023f45dcd0), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.113330] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog f74317b0), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.113367] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog f74317c8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
klog Kernel message: [ 2.132386] ACPI Error: Could not enable
@@ -11668,14 +12538,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.149905] ACPI Error: Method parse/execution
-klog failed [_SB_.C003.C099._DOD] (Node f30275a0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.149905] ACPI Error: Method parse
+klog /execution failed [_SB_.C003.C099._DOD] (Node f30275a0),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
klog Kernel message: [ 2.173036] ACPI Warning for _SB_._OSC:
@@ -11694,41 +12566,49 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.200371] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node f602bf30),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.200380] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f602d2d0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.206433] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node f742d018),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.206443] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f742d3a8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 2.222353] ACPI Error: [EABF] Namespace
@@ -11738,50 +12618,57 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.222362] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node f602d018),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.222372] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f602d3a8),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 2.227407] ACPI Error (psargs-0359): [GTF1]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 2.227407] ACPI Error (psargs-0359):
+klog [GTF1] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.227411] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
-klog f702b7b0), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.227411] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT0.PRT1._SDD]
+klog (Node f702b7b0), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.227454] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
-klog f702b7c8), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.227454] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SAT0.PRT1._GTF]
+klog (Node f702b7c8), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 2.229498] ACPI Warning: Incorrect
@@ -11792,50 +12679,60 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.231431] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node f602bf60),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.231442] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f602d300),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.250291] ACPI Error: Method parse
klog /execution failed [_SB_.BAT1.UBIF] (Node ffff88013762f550)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.250306] ACPI Error: Method parse
klog /execution failed [_SB_.BAT1._BIF] (Node ffff88013762f500)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.270835] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ffff880125e2c708)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 2.280398] ACPI Error (dswload-0781):
@@ -11845,86 +12742,101 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.280410] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.BAT1.UBIF] (Node
klog ffff8800b3c2e100), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.280443] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.BAT1._BIF] (Node
klog ffff8800b3c2e0c0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 2.283579] ACPI Error (psargs-0359): [_T_0]
-klog Namespace lookup failure, AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 2.283579] ACPI Error (psargs-0359):
+klog [_T_0] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.283585] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.BAT1.UBIF] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.283585] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.BAT1.UBIF] (Node
klog ffff8800b3c2e100), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.283615] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q09] (Node
-klog ffff8800b3c410e0), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.288649] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff88023f45dcd0),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.288685] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff88023f45dcf8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.283615] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q09]
+klog (Node ffff8800b3c410e0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.288649] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog ffff88023f45dcd0), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.288685] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog ffff88023f45dcf8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.294251] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node f742bf30),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.294262] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f742d2d0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 2.324547] ACPI Error: [EABF] Namespace
@@ -11934,23 +12846,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.324556] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node f742d018),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.324566] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f742d3a8),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
klog message: [ 2.334361] ACPI Error: Attempt to CreateField of
@@ -11961,104 +12877,125 @@ klog while executing ACPI AML. The error lists the ACPI driver
klog module and the line number where the bug has been caught
klog and the method that caused the error.
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.334370] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.IDE0.RATA] (Node
klog ffff8801376322a8), AE_AML_OPERAND_VALUE (20110112
klog /psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.334384] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.IDE0.PRT1._GTF] (Node
klog ffff880137632438), AE_AML_OPERAND_VALUE (20110112
klog /psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.336604] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.336604] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
klog ffff88013b63c460), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.384172] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff8801c305dcd0),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.384189] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff8801c305dcf8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 2.440684] ACPI Error (psargs-0359): [SMS_]
-klog Namespace lookup failure, AE_NOT_FOUND
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.440692] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD] (Node
-klog ffff88007db30c60), AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.462687] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node ffff880147646cd0),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.462711] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node ffff880147646cf8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.384172] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog ffff8801c305dcd0), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.384189] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog ffff8801c305dcf8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 2.440684] ACPI Error (psargs-0359):
+klog [SMS_] Namespace lookup failure, AE_NOT_FOUND
+klog
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.440692] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.SATA.PRT0._SDD]
+klog (Node ffff88007db30c60), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.462687] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog ffff880147646cd0), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.462711] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog ffff880147646cf8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.468708] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU1._PDC] (Node
klog f700f180), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiInvalidTableLength: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.468963] ACPI Error (psparse-0537):
klog Method parse/execution failed [_PR_.CPU2._PDC] (Node
klog f700f240), AE_INVALID_TABLE_LENGTH
klog
-klog ADVICE: The ACPI Method returned a table of the incorrect
-klog length. This can lead to unexepected results.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 2.478380] [Firmware Bug]: ACPI(NGFX) defines
@@ -12069,131 +13006,156 @@ klog to display adapter) is defined but we should also have
klog _DOS (Enable/Disable output switching) defined but it's
klog been omitted. This can cause display switching issues.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.592359] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.592359] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU0.PPC_] (Node ffff88014f9a4140)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.592381] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.593071] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.593648] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU2._PPC] (Node ffff88014f9a4370)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.593935] ACPI Error: Method parse
+klog /execution failed [_PR_.CPU3._PPC] (Node ffff88014f9a42d0)
+klog , AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 2.634350] ACPI Error: [GTF1] Namespace
+klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.592381] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU0._PPC] (Node ffff88014f9a4028),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.634355] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
+klog f3431af8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.634373] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
+klog f3431b10), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.671117] ACPI Error: Method parse
+klog /execution failed [_SB_.EEAC] (Node f2c2d018),
+klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.593071] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU1._PPC] (Node ffff88014f9a4118),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.671128] ACPI Error: Method parse
+klog /execution failed [_SB_.BAT2._STA] (Node f2c2d3a8),
+klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.701908] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
+klog f3831af8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.701933] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
+klog f3831b10), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.771747] ACPI Error: Method parse
+klog /execution failed [_SB_.EEAC] (Node f402bf60),
+klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.593648] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU2._PPC] (Node ffff88014f9a4370),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.593935] ACPI Error: Method parse/execution
-klog failed [_PR_.CPU3._PPC] (Node ffff88014f9a42d0),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 2.634350] ACPI Error: [GTF1] Namespace lookup
-klog failure, AE_NOT_FOUND (20110112/psargs-359)
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.634355] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3431af8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.634373] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3431b10),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
-klog Kernel message: [ 2.671117] ACPI Error: Method parse
-klog /execution failed [_SB_.EEAC] (Node f2c2d018),
-klog AE_ALREADY_EXISTS (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
-klog Kernel message: [ 2.671128] ACPI Error: Method parse
-klog /execution failed [_SB_.BAT2._STA] (Node f2c2d3a8),
-klog AE_ALREADY_EXISTS (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.701908] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3831af8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.701933] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3831b10),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
-klog Kernel message: [ 2.771747] ACPI Error: Method parse
-klog /execution failed [_SB_.EEAC] (Node f402bf60),
-klog AE_ALREADY_EXISTS (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 2.771758] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node f402d300),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 2.787172] ACPI Warning: For
@@ -12211,23 +13173,27 @@ klog
klog ADVICE: Method _BQC (Brightness Query Current) returned an
klog invalid display brightness level.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.837958] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f7431858),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.837958] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
+klog f7431858), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.837994] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f7431870),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.837994] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
+klog f7431870), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
klog HIGH Kernel message: [ 2.838171] ACPI Warning for
@@ -12246,42 +13212,48 @@ klog
klog ADVICE: Method _BQC (Brightness Query Current) returned an
klog invalid display brightness level.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.860339] ACPI Error: Method parse/execution
-klog failed [_SB_.C003.C098._DOD] (Node f4427588),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.860339] ACPI Error: Method parse
+klog /execution failed [_SB_.C003.C098._DOD] (Node f4427588),
klog AE_AML_PACKAGE_LIMIT (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 2.861808] ACPI Error:
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 2.861808] ACPI Error:
klog [_SB_.PCI0.GFX0.DD02._BCL] Namespace lookup failure,
klog AE_NOT_FOUND (20110112/psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 2.861812] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.861812] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
klog ffff88015746e168), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 2.870589] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff880137632c80),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 2.870589] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog ffff880137632c80), AE_AML_PACKAGE_LIMIT (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
klog Kernel message: [ 2.906610] ACPI Warning: For
@@ -12311,14 +13283,16 @@ klog an 8 byte buffer of 2 x 32 DWORDs, however it appears that
klog the method is possibly trying to access data outside this
klog buffer. This is a bug in the _OSC method.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.005123] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_._OSC] (Node ffff88122fc1ea00)
-klog , AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.005123] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_._OSC] (Node
+klog ffff88122fc1ea00), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 3.033154] ACPI Warning: Incorrect
@@ -12329,50 +13303,60 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.112435] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node f74257c8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.112435] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node f74257c8),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.112465] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node f742c210),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.112465] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node f742c210),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.112494] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node f7427a20),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.112494] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node f7427a20),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.112522] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node f74279d8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.112522] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node f74279d8),
klog AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.112549] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog f7427690), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.112549] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node f7427690), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 3.139648] [Firmware Bug]: ACPI(XVS0) defines
@@ -12383,23 +13367,27 @@ klog to display adapter) is defined but we should also have
klog _DOS (Enable/Disable output switching) defined but it's
klog been omitted. This can cause display switching issues.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 3.208822] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.C003.C098._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.208822] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.C003.C098._DOD] (Node
klog ffff88007cf30b60), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 3.223518] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.223518] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
klog ffff880236c469a0), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 3.382436] ACPI Warning: Incorrect
@@ -12445,21 +13433,27 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 3.490832] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PMI0._GHL] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.490832] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PMI0._GHL] (Node
klog ffff88013bc2bdc0), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 3.490852] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PMI0._PMC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.490852] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PMI0._PMC] (Node
klog ffff88013bc2bd40), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiCouldNotEnableEvent: Test 1, HIGH
klog Kernel message: [ 3.502273] ACPI Error: Could not enable
@@ -12469,14 +13463,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 3.601126] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.601126] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
klog f7420690), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [MEDIUM] KlogAcpiIncorrectTableChecksum: Test 1,
klog MEDIUM Kernel message: [ 3.644168] ACPI Warning: Incorrect
@@ -12503,41 +13499,49 @@ klog
klog ADVICE: Could not set the brightness level, the ACPI
klog control _BCM failed to execute correctly.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.868794] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node f3831b58),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 3.868812] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node f3831b70),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.868794] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._SDD] (Node
+klog f3831b58), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 3.868812] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT0._GTF] (Node
+klog f3831b70), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 3.983031] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node ffff88021d459028),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 3.983040] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node ffff88021d459618)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 4.002664] [Firmware Bug]: ACPI(EVGA) defines
@@ -12557,109 +13561,140 @@ klog ADVICE: The ACPI table listed above has an incorrect
klog checksum, this could be a BIOS bug or due to table
klog corruption.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.115197] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node ffff88021d458eb0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.115206] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node ffff88021d4594b0)
klog , AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 4.190434] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342f8),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 4.198699] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node f3831c00),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 4.198716] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node f3831c18),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.190434] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog ffff8801376342f8), AE_AML_PACKAGE_LIMIT (20110112
+klog /psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
-klog Kernel message: [ 4.230508] ACPI Exception: AE_TIME,
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.198699] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._SDD] (Node
+klog f3831c00), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.198716] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT0.PRT1._GTF] (Node
+klog f3831c18), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiTimeOutReturnedByHandler: Test 1,
+klog HIGH Kernel message: [ 4.230508] ACPI Exception: AE_TIME,
klog Returned by Handler for [EmbeddedControl] (20090903
klog /evregion-424)
klog
-klog ADVICE: The ACPI driver detected an error returned by a
-klog region handler.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 4.230527] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.ISAB.ECDV.ECR1] (Node
-klog f7018ed0), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 4.230612] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.ISAB.ECDV.ECR2] (Node
-klog f7018ee8), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 4.230643] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRW] (Node f7018fa8), AE_TIME
+klog ADVICE: This is most probably caused by when a read or
+klog write operation to the EC memory has failed because of a
+klog timeout waiting for the Embedded Controller to complete
+klog the transaction. Normally, the kernel waits for 500ms for
+klog the Embedded Controller status port to indicate that a
+klog transaction is complete, but in this case it has not and a
+klog AE_TIME error has been returned.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.230527] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.ISAB.ECDV.ECR1]
+klog (Node f7018ed0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.230612] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.ISAB.ECDV.ECR2]
+klog (Node f7018ee8), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.230643] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRW] (Node f7018fa8),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 4.230672] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG1] (Node f7018fd8), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.230672] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG1] (Node f7018fd8),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 4.230701] ACPI Error (psparse-0537): Method parse
-klog /execution failed [NEVT] (Node f70186f0), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.230701] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node f70186f0),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 4.230730] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.ISAB.ECDV._Q66] (Node
-klog f7018eb8), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.230730] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.ISAB.ECDV._Q66]
+klog (Node f7018eb8), AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 4.576415] ACPI Error: No handler for
@@ -12670,77 +13705,93 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.576437] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.SBRG.EC0_._REG] (Node
klog f48326d8), AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.638115] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node ffff880220c5b028),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.638127] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node ffff880220c5b618)
klog , AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 4.838935] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_TZ_.C2E8] (Node f701b108),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.838935] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_TZ_.C2E8] (Node f701b108),
klog AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 4.838984] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_TZ_.C2E7] (Node f701b0f0),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.838984] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_TZ_.C2E7] (Node f701b0f0),
klog AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 4.839033] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_TZ_.TZ2_._TMP] (Node f701b7c8),
-klog AE_AML_PACKAGE_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 4.839033] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_TZ_.TZ2_._TMP] (Node
+klog f701b7c8), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.890970] ACPI Error: Method parse
klog /execution failed [_SB_.EEAC] (Node ffff880126e43f50),
klog AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 4.890980] ACPI Error: Method parse
klog /execution failed [_SB_.BAT2._STA] (Node ffff880126e44550)
klog , AE_ALREADY_EXISTS (20110413/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 4.983204] [Firmware Bug]: ACPI(MXM3) defines
@@ -12761,50 +13812,60 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with incorrectly typed data. The
klog offending method needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 5.332663] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node f4425450),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 5.332663] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f4425450),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.224974] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
klog f3423438), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.224987] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
klog f3423420), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.227917] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
klog f34235b8), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.227930] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
klog f34235a0), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 6.732287] ACPI Error: [_T_0] Namespace
@@ -12814,23 +13875,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.732310] ACPI Error: Method parse
klog /execution failed [_SB_.BAT1.UBIF] (Node dd028fc0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.732334] ACPI Error: Method parse
klog /execution failed [_SB_.BAT1._BIF] (Node dd028f90),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
klog Kernel message: [ 6.773266] ACPI Error: [CAPB] Namespace
@@ -12840,14 +13905,16 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 6.773285] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node ddc25ca8),
klog AE_ALREADY_EXISTS (20101013/psparse-537)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNoHandlerForRegion: Test 1, HIGH
klog Kernel message: [ 7.365139] ACPI Error: No handler for
@@ -12866,66 +13933,82 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 7.365161] ACPI Error: Method parse
klog /execution failed [_SB_.PMI0._GHL] (Node ffff8805ffa36b18)
klog , AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectDoesNotExist: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 7.365181] ACPI Error: Method parse
klog /execution failed [_SB_.PMI0._PMC] (Node ffff8805ffa36a78)
klog , AE_NOT_EXIST (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 8.137284] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node f702e720), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 8.137317] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node f702e7f8),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 8.137284] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog f702e720), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 8.137317] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node f702e7f8), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 8.137344] ACPI Error (psparse-0537): Method parse
-klog /execution failed [EC0A] (Node f702ea08), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 8.137370] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AMW0._WED] (Node f7019ca8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 8.137344] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EC0A] (Node f702ea08),
klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 8.227953] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.C003.C098._DOD] (Node
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 8.137370] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AMW0._WED] (Node
+klog f7019ca8), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 8.227953] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.C003.C098._DOD] (Node
klog f7021588), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 8.316300] [Firmware Bug]: ACPI(VGA0) defines
@@ -12936,48 +14019,60 @@ klog to display adapter) is defined but we should also have
klog _DOS (Enable/Disable output switching) defined but it's
klog been omitted. This can cause display switching issues.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 8.794633] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0._OSC] (Node f5824ab0),
klog AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 9.141980] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog f702e690), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.141980] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node f702e690), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.142017] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node f702e768),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 9.142017] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node f702e768), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.142046] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EC0A] (Node f702e978),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 9.142046] ACPI Error (psparse-0537): Method parse
-klog /execution failed [EC0A] (Node f702e978), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.142076] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AMW0._WED] (Node
+klog f7019420), AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 9.142076] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AMW0._WED] (Node f7019420),
-klog AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageTypeMismatch: Test 1,
klog HIGH Kernel message: [ 9.267040] ACPI Warning for
@@ -12988,21 +14083,27 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with incorrectly typed data. The
klog offending method needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 9.391036] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.IBCM] (Node f3828738),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.391036] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.IBCM] (Node f3828738),
klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 9.391049] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD03._BCM] (Node f3824b28),
-klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.391049] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
+klog f3824b28), AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
klog message: [ 9.391061] ACPI Error: Evaluating _BCM failed
@@ -13019,23 +14120,29 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 9.393498] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff88012f83e6b8),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.393498] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
+klog ffff88012f83e6b8), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 9.393510] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff88012f83e690),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.393510] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
+klog ffff88012f83e690), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 9.394098] ACPI Error: Needed
@@ -13045,59 +14152,73 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 9.394109] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node ffff88012f83e6e0),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 9.394118] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff88012f83e668),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 9.957372] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node ffff88007af33780),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 9.957372] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node ffff88007af33910),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.394109] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node
+klog ffff88012f83e6e0), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 9.957372] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SATA.CHN0._GTM] (Node ffff88007af32b68),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.394118] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
+klog ffff88012f83e668), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 9.957372] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.SATA.CHN1._GTM] (Node ffff88007af32cf8),
-klog AE_NOT_FOUND (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.957372] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT1.CHN0._GTM] (Node
+klog ffff88007af33780), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.957372] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SAT1.CHN1._GTM] (Node
+klog ffff88007af33910), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.957372] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SATA.CHN0._GTM] (Node
+klog ffff88007af32b68), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 9.957372] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.SATA.CHN1._GTM] (Node
+klog ffff88007af32cf8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 10.080352] [Firmware Bug]: ACPI(VGA) defines
@@ -13116,14 +14237,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 10.120977] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023f45edc0),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.120977] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node
+klog ffff88023f45edc0), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 10.121007] ACPI Error: Needed
@@ -13133,14 +14257,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 10.121018] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PEG0.GFX0._DSM] (Node ffff88023f474370),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.121018] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PEG0.GFX0._DSM] (Node
+klog ffff88023f474370), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 10.194089] ACPI Warning for
@@ -13151,23 +14278,24 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 10.289821] ACPI Error (psargs-0359):
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 10.289821] ACPI Error (psargs-0359):
klog [_PR_.CPU0._CST] Namespace lookup failure, AE_NOT_FOUND
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 10.289828] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.CPU1._CST] (Node f70c3288),
-klog AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.289828] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.CPU1._CST] (Node
+klog f70c3288), AE_NOT_FOUND
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiIncorrectWriteBufferSize: Test 1,
klog HIGH Kernel message: [ 10.344782] ACPI Error: SMBus or
@@ -13177,21 +14305,27 @@ klog
klog ADVICE: An incorrect SMBus or IPMI write buffer size was
klog used.
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 10.344788] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PMI0._GHL] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.344788] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PMI0._GHL] (Node
klog ffff88122fc1ece0), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 10.344812] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PMI0._PMC] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.344812] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PMI0._PMC] (Node
klog ffff88122fc1ec60), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 10.380244] ACPI Warning
@@ -13202,202 +14336,261 @@ klog ADVICE: ACPI AML interpreter executed a Method that
klog returned a package with no elements inside it. This is
klog most probably a bug in the Method and needs to be fixed.
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 10.680422] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
klog ffff880117642ed8), AE_AML_INFINITE_LOOP (20110112
klog /psparse-536)
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.692650] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR2] (Node
-klog f702e738), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.692684] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRW] (Node f702e810), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.692710] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG1] (Node f702e840), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.692735] ACPI Error (psparse-0537): Method parse
-klog /execution failed [NEVT] (Node f702ea50), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.692761] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog f702e708), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.708822] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog f7427738), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.708876] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node f7427810), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.708908] ACPI Error (psparse-0537): Method parse
-klog /execution failed [EC0A] (Node f7427a20), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.708939] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AMW0._WED] (Node f742c078),
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.692650] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR2]
+klog (Node f702e738), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.692684] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRW] (Node f702e810),
klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.724353] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog ffff880213050d00), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.724416] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node ffff880213050e20), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.724449] ACPI Error (psparse-0537): Method parse
-klog /execution failed [EC0A] (Node ffff8802130520e0), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 10.724482] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AMW0._WED] (Node ffff8802130573c0)
-klog , AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.195653] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG5] (Node f702e8a0), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.195680] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AC__._PSR] (Node f702ec90),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.692710] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG1] (Node f702e840),
klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 11.383565] ACPI Error: Method parse/execution
-klog failed [_SB_.C003.C098._DOD] (Node ffff880137636938),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.692735] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node f702ea50),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.692761] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node f702e708), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.708822] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node f7427738), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.708876] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node f7427810),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.660551] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR2] (Node
-klog f702e6a8), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.660591] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRW] (Node f702e780), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.708908] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EC0A] (Node f7427a20),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.708939] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AMW0._WED] (Node
+klog f742c078), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.724353] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node ffff880213050d00), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.724416] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node
+klog ffff880213050e20), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.724449] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EC0A] (Node
+klog ffff8802130520e0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 10.724482] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AMW0._WED] (Node
+klog ffff8802130573c0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.195653] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG5] (Node f702e8a0),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.660615] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG1] (Node f702e7b0), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.195680] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog f702ec90), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.383565] ACPI Error: Method parse
+klog /execution failed [_SB_.C003.C098._DOD] (Node
+klog ffff880137636938), AE_AML_PACKAGE_LIMIT (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.660551] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR2]
+klog (Node f702e6a8), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.660591] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRW] (Node f702e780),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.660638] ACPI Error (psparse-0537): Method parse
-klog /execution failed [NEVT] (Node f702e9c0), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.660615] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG1] (Node f702e7b0),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 11.660661] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog f702e678), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.660638] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node f702e9c0),
+klog AE_TIME
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 11.800514] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff8801376342a8),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.660661] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node f702e678), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 11.800514] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog ffff8801376342a8), AE_AML_PACKAGE_LIMIT (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 11.880473] ACPI Error: Needed
@@ -13415,58 +14608,71 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 11.915871] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.SWFS] (Node
klog ffff880226c49320), AE_AML_INFINITE_LOOP
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 11.915905] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.RBYT] (Node
klog ffff880226c493c0), AE_AML_INFINITE_LOOP
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 11.915932] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.ASOC.SECV] (Node
klog ffff880226c4a0e0), AE_AML_INFINITE_LOOP
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 11.915960] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.ASOC.RVLT] (Node
klog ffff880226c49b00), AE_AML_INFINITE_LOOP
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 12.160904] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG5] (Node f702e810), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.160904] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG5] (Node f702e810),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 12.160929] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AC__._PSR] (Node f702ec00),
-klog AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.160929] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog f702ec00), AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 12.167076] ACPI Error: Needed
@@ -13476,23 +14682,27 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 12.167089] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
-klog ffff8800b3c44ca0), AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.167089] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC]
+klog (Node ffff8800b3c44ca0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 12.167143] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
-klog ffff8800b3c44c80), AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.167143] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC]
+klog (Node ffff8800b3c44c80), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
klog Kernel message: [ 12.167205] ACPI Warning: Evaluating _BQC
@@ -13509,23 +14719,29 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 12.242387] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node ffff88013113f6b8),
-klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.242387] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
+klog ffff88013113f6b8), AE_AML_OPERAND_TYPE (20110413
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 12.242397] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02._BQC] (Node ffff88013113f690),
-klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.242397] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
+klog ffff88013113f690), AE_AML_OPERAND_TYPE (20110413
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
klog Kernel message: [ 12.242409] ACPI Warning: Evaluating _BQC
@@ -13542,23 +14758,29 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 12.242986] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node ffff88013113f6e0),
-klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.242986] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02.SBCM] (Node
+klog ffff88013113f6e0), AE_AML_OPERAND_TYPE (20110413
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 12.242994] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0.DD02._BCM] (Node ffff88013113f668),
-klog AE_AML_OPERAND_TYPE (20110413/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.242994] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0.DD02._BCM] (Node
+klog ffff88013113f668), AE_AML_OPERAND_TYPE (20110413
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBcmFailed: Test 1, HIGH Kernel
klog message: [ 12.243002] ACPI Error: Evaluating _BCM failed
@@ -13567,31 +14789,38 @@ klog
klog ADVICE: Could not set the brightness level, the ACPI
klog control _BCM failed to execute correctly.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 12.361137] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.C003.C09D._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.361137] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.C003.C09D._DOD] (Node
klog ffff88013b630c00), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 12.390421] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG5] (Node ffff880213050f00), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 12.390446] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AC__._PSR] (Node ffff880213052440)
-klog , AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.390421] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG5] (Node
+klog ffff880213050f00), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 12.390446] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog ffff880213052440), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
klog Kernel message: [ 12.553637] ACPI Warning: For
@@ -13601,14 +14830,20 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
-klog Kernel message: [ 12.838979] cfg80211: Ignoring regulatory
-klog request Set by core since the driver uses its own custom
-klog regulatory domain ACPI Exception: AE_TIME, Returned by
-klog Handler for [EmbeddedControl] (20110112/evregion-474)
+klog FAILED [HIGH] KlogAcpiTimeOutReturnedByHandler: Test 1,
+klog HIGH Kernel message: [ 12.838979] cfg80211: Ignoring
+klog regulatory request Set by core since the driver uses its
+klog own custom regulatory domain ACPI Exception: AE_TIME,
+klog Returned by Handler for [EmbeddedControl] (20110112
+klog /evregion-474)
klog
-klog ADVICE: The ACPI driver detected an error returned by a
-klog region handler.
+klog ADVICE: This is most probably caused by when a read or
+klog write operation to the EC memory has failed because of a
+klog timeout waiting for the Embedded Controller to complete
+klog the transaction. Normally, the kernel waits for 500ms for
+klog the Embedded Controller status port to indicate that a
+klog transaction is complete, but in this case it has not and a
+klog AE_TIME error has been returned.
klog
klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
klog HIGH Kernel message: [ 12.841008] cfg80211: Ignoring
@@ -13619,84 +14854,99 @@ klog
klog ADVICE: Method _BQC (Brightness Query Current) returned an
klog invalid display brightness level.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 13.024512] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node f7425450),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.024512] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f7425450),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 13.396787] ACPI Error: Method parse/execution failed
-klog [_SB_.ADP1._PSR] (Node ffff88011763ba00), AE_TIME
-klog (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.396787] ACPI Error: Method parse
+klog /execution failed [_SB_.ADP1._PSR] (Node ffff88011763ba00)
+klog , AE_TIME (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [CRITICAL] KlogAcpiFieldexceedsBuffer: Test 1,
klog CRITICAL Kernel message: [ 13.445954] ACPI Error: Field
klog [D128] at 1040 exceeds Buffer [NULL] size 160 (bits)
-klog (20110112/dsopcode-597)
-klog
-klog ADVICE: The field exceeds the allocated buffer size. This
-klog can lead to unexpected results when fetching data outside
-klog this region.
-klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 13.445980] ACPI Error: Method parse/execution
-klog failed [_SB_.WMID.HWMC] (Node f742a8b8),
-klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
-klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
-klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 13.446019] ACPI Error: Method parse/execution
-klog failed [_SB_.WMID.WMAD] (Node f742aac8),
-klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
-klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 13.452167] ACPI Error (psargs-0359):
-klog [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND
-klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog (20110112/dsopcode-597)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 13.452177] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.EC0_.TPAF] (Node
-klog f702bde0), AE_NOT_FOUND
+klog ADVICE: The field exceeds the allocated buffer size. This
+klog can lead to unexpected results when fetching data outside
+klog this region.
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.445980] ACPI Error: Method parse
+klog /execution failed [_SB_.WMID.HWMC] (Node f742a8b8),
+klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 13.452213] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.EC0_.TBOM] (Node
-klog f702bdf8), AE_NOT_FOUND
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.446019] ACPI Error: Method parse
+klog /execution failed [_SB_.WMID.WMAD] (Node f742aac8),
+klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 13.452247] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPC0.EC0_._Q1D] (Node
-klog f702ba98), AE_NOT_FOUND
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 13.452167] ACPI Error (psargs-0359):
+klog [_PR_.C001] Namespace lookup failure, AE_NOT_FOUND
+klog
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.452177] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_.TPAF]
+klog (Node f702bde0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.452213] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_.TBOM]
+klog (Node f702bdf8), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 13.452247] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPC0.EC0_._Q1D]
+klog (Node f702ba98), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
klog HIGH Kernel message: [ 14.013275] ACPI Warning: _BQC
@@ -13705,23 +14955,27 @@ klog
klog ADVICE: Method _BQC (Brightness Query Current) returned an
klog invalid display brightness level.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 14.175645] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.OVGA.DD03.GBQC] (Node
klog f44247e0), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 14.175656] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.OVGA.DD03._BQC] (Node
klog f44247c8), AE_ALREADY_EXISTS (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
klog Kernel message: [ 14.175667] ACPI Warning: Evaluating _BQC
@@ -13738,14 +14992,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 14.885234] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DSM] (Node ffff88013f849eb0),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 14.885234] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node
+klog ffff88013f849eb0), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 14.885277] ACPI Error: Needed
@@ -13755,59 +15012,72 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 14.885289] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff88013f86f668),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 15.027464] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_PR_.PPCE] (Node ffff880075137920)
-klog , AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 15.027505] ACPI Error (psparse-0537): Method
-klog parse/execution failed [EV4_] (Node ffff880075140660),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 15.027542] ACPI Error (psparse-0537): Method
-klog parse/execution failed [SMIE] (Node ffff88007513b180),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 15.027579] ACPI Error (psparse-0537): Method
-klog parse/execution failed [NEVT] (Node ffff88007513b120),
-klog AE_NOT_FOUND
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 15.027616] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66] (Node
-klog ffff880075139cc0), AE_NOT_FOUND
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 14.885289] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
+klog ffff88013f86f668), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 15.027464] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_PR_.PPCE] (Node
+klog ffff880075137920), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 15.027505] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EV4_] (Node
+klog ffff880075140660), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 15.027542] ACPI Error (psparse-0537):
+klog Method parse/execution failed [SMIE] (Node
+klog ffff88007513b180), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 15.027579] ACPI Error (psparse-0537):
+klog Method parse/execution failed [NEVT] (Node
+klog ffff88007513b120), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 15.027616] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV._Q66]
+klog (Node ffff880075139cc0), AE_NOT_FOUND
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
klog HIGH Kernel message: [ 15.287082] ACPI Warning: _BQC
@@ -13825,41 +15095,49 @@ klog to display adapter) is defined but we should also have
klog _DOS (Enable/Disable output switching) defined but it's
klog been omitted. This can cause display switching issues.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 15.846531] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 15.846531] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
klog ffff8800b3840360), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 16.336080] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.EC0_._Q33] (Node
-klog f70244b0), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 16.336080] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.EC0_._Q33]
+klog (Node f70244b0), AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 16.592600] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.ASOC.SEFA] (Node
klog ffff880226c4a120), AE_AML_INFINITE_LOOP
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiParseOrExecFailure: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 16.592628] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.ASOC.RFAN] (Node
klog ffff880226c49bc0), AE_AML_INFINITE_LOOP
klog
-klog ADVICE: The ACPI engine has failed to execute some AML.
-klog The error message above lists the method that caused this
-klog error.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnPackageZeroElements: Test 1,
klog HIGH Kernel message: [ 16.719798] ACPI Warning for
@@ -13878,23 +15156,27 @@ klog ADVICE: This is a bug picked up by the kernel, but as yet,
klog the firmware test suite has no diagnostic advice for this
klog particular problem.
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 16.942606] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.OVGA.DD03.GBQC]
klog (Node ffff8800b7e3c6e0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 16.942654] ACPI Error (psparse-0537):
klog Method parse/execution failed [_SB_.PCI0.OVGA.DD03._BQC]
klog (Node ffff8800b7e3c6c0), AE_ALREADY_EXISTS
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 17.125601] ACPI Error: Needed
@@ -13904,14 +15186,16 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 17.125618] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DSM] (Node f7431fa8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.125618] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node f7431fa8),
klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 17.125669] ACPI Error: Needed
@@ -13921,55 +15205,71 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 17.125690] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node f7445c78),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 17.802564] ACPI Error: Method parse/execution
-klog failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078),
-klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
-klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.125690] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
+klog f7445c78), AE_AML_OPERAND_TYPE (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 17.802574] ACPI Error: Method parse/execution
-klog failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258),
-klog AE_AML_BUFFER_LIMIT (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.802564] ACPI Error: Method parse
+klog /execution failed [_SB_.WMID.HWMC] (Node ffff8801ffc5c078)
+klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 17.847665] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node f444ebe8),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.802574] ACPI Error: Method parse
+klog /execution failed [_SB_.WMID.WMAD] (Node ffff8801ffc5c258)
+klog , AE_AML_BUFFER_LIMIT (20110112/psparse-536)
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 17.985672] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.IBCM] (Node
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.847665] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PEG0.PEGP.DD02._BCL] (Node
+klog f444ebe8), AE_NOT_FOUND (20110112/psparse-536)
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.985672] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.IBCM] (Node
klog ffff8800b3832600), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiBufferLimit: Test 1, HIGH Kernel
-klog message: [ 17.985723] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM] (Node
-klog ffff8800b382b840), AE_AML_BUFFER_LIMIT
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 17.985723] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0.DD03._BCM]
+klog (Node ffff8800b382b840), AE_AML_BUFFER_LIMIT
klog
-klog ADVICE: Method failed: ResourceSourceIndex is present but
-klog ResourceSource is not.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 18.054842] ACPI Error: Needed
@@ -13979,14 +15279,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 18.054860] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.VGA_._DSM] (Node ffff880137659190),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 18.054860] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.VGA_._DSM] (Node
+klog ffff880137659190), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 18.054909] ACPI Error: Needed
@@ -13996,106 +15299,131 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 18.054932] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node ffff88013765d230),
-klog AE_AML_OPERAND_TYPE (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 18.054932] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
+klog ffff88013765d230), AE_AML_OPERAND_TYPE (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 18.353938] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_.GBQC] (Node
klog ffff88013762f708), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 18.353954] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD_._BQC] (Node
klog ffff88013762f6e0), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 18.367485] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1.GBQC] (Node
klog ffff88013762f988), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiObjectAlreadyExists: Test 1, HIGH
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
klog Kernel message: [ 18.367501] ACPI Error: Method parse
klog /execution failed [_SB_.PCI0.PEGP.VGA_.LCD1._BQC] (Node
klog ffff88013762f960), AE_ALREADY_EXISTS (20110112
klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 18.720899] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 18.720899] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0._DOD] (Node
klog f70206d8), AE_AML_PACKAGE_LIMIT
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 19.086127] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog f702e6a8), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 19.086176] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node f702e780), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 19.086202] ACPI Error (psparse-0537): Method parse
-klog /execution failed [EC0A] (Node f702e990), AE_TIME
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 19.086127] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node f702e6a8), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 19.086176] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node f702e780),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 19.086228] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AMW0._WED] (Node f7019fd8),
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 19.086202] ACPI Error (psparse-0537):
+klog Method parse/execution failed [EC0A] (Node f702e990),
klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 19.408610] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node f74256a8),
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 19.086228] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AMW0._WED] (Node
+klog f7019fd8), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 19.408610] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node f74256a8),
klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 20.135790] ACPI Error: Needed
@@ -14105,14 +15433,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 20.135804] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DSM] (Node ffff88023ec61eb0),
-klog AE_AML_OPERAND_TYPE (20110316/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 20.135804] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DSM] (Node
+klog ffff88023ec61eb0), AE_AML_OPERAND_TYPE (20110316
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 20.135849] ACPI Error: Needed
@@ -14122,14 +15453,17 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 20.135864] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node ffff88023ec77668),
-klog AE_AML_OPERAND_TYPE (20110316/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 20.135864] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.PEG1.GFX0._DSM] (Node
+klog ffff88023ec77668), AE_AML_OPERAND_TYPE (20110316
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
klog message: [ 20.149010] ACPI Error: Needed [Integer/String
@@ -14140,14 +15474,17 @@ klog while executing ACPI AML. The error lists the ACPI driver
klog module and the line number where the bug has been caught
klog and the method that caused the error.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 20.149032] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.P0P2.PEGP.LCD_._BQC]
-klog (Node f741f978), AE_AML_OPERAND_TYPE
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 20.149032] ACPI Error (psparse-0537):
+klog Method parse/execution failed
+klog [_SB_.PCI0.P0P2.PEGP.LCD_._BQC] (Node f741f978),
+klog AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiEvaluationFailed: Test 1, HIGH
klog Kernel message: [ 20.149063] ACPI Warning: Evaluating _BQC
@@ -14190,14 +15527,17 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiPackageLimit: Test 1, HIGH Kernel
-klog message: [ 21.460488] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.GFX0._DOD] (Node ffff880133632c80),
-klog AE_AML_PACKAGE_LIMIT (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 21.460488] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.GFX0._DOD] (Node
+klog ffff880133632c80), AE_AML_PACKAGE_LIMIT (20110112
+klog /psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiNeededBufferOrStringOrPackage: Test
klog 1, HIGH Kernel message: [ 21.562484] ACPI Error: Needed
@@ -14207,57 +15547,71 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 21.562496] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC] (Node
-klog f7017a68), AE_AML_OPERAND_TYPE
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 21.562544] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC] (Node
-klog f7017a50), AE_AML_OPERAND_TYPE
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 22.154348] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog f74276a8), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 22.154443] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node f7427780), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 21.562496] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0.DD02.GBQC]
+klog (Node f7017a68), AE_AML_OPERAND_TYPE
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 21.562544] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.GFX0.DD02._BQC]
+klog (Node f7017a50), AE_AML_OPERAND_TYPE
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 22.154348] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node f74276a8), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 22.154443] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node f7427780),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 22.154516] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG5] (Node f7427828), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 22.154516] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG5] (Node f7427828),
+klog AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 22.154587] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AC__._PSR] (Node f7427c18),
-klog AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 22.154587] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog f7427c18), AE_TIME
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiDodWithNoDos: Test 1, HIGH Kernel
klog message: [ 24.824888] [Firmware Bug]: ACPI(IGPU) defines
@@ -14276,65 +15630,84 @@ klog
klog ADVICE: An ACPI Method has returned an Integer type when a
klog Buffer, String or Package was expected.
klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 25.859949] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 25.859949] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.VGA_._DSM] (Node
klog ffff88013ba4c0e0), AE_AML_OPERAND_TYPE
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiOperandType: Test 1, HIGH Kernel
-klog message: [ 25.860025] ACPI Error (psparse-0537): Method
-klog parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM] (Node
-klog ffff88013ba4da80), AE_AML_OPERAND_TYPE
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiRegionHandlerError: Test 1, HIGH
-klog Kernel message: [ 26.653079] ACPI Exception: AE_TIME,
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 25.860025] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.P0P1.VGA_._DSM]
+klog (Node ffff88013ba4da80), AE_AML_OPERAND_TYPE
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiTimeOutReturnedByHandler: Test 1,
+klog HIGH Kernel message: [ 26.653079] ACPI Exception: AE_TIME,
klog Returned by Handler for [EmbeddedControl] (20100428
klog /evregion-474)
klog
-klog ADVICE: The ACPI driver detected an error returned by a
-klog region handler.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 26.653190] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog ffff880226c54ce0), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 26.653252] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node ffff880226c54e00), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 26.653283] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG5] (Node ffff880226c54ee0), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 26.653307] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AC__._PSR] (Node ffff880226c56420)
-klog , AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: This is most probably caused by when a read or
+klog write operation to the EC memory has failed because of a
+klog timeout waiting for the Embedded Controller to complete
+klog the transaction. Normally, the kernel waits for 500ms for
+klog the Embedded Controller status port to indicate that a
+klog transaction is complete, but in this case it has not and a
+klog AE_TIME error has been returned.
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 26.653190] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node ffff880226c54ce0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 26.653252] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node
+klog ffff880226c54e00), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 26.653283] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG5] (Node
+klog ffff880226c54ee0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 26.653307] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog ffff880226c56420), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiBqcReturnedInvalidLevel: Test 1,
klog HIGH Kernel message: [ 26.874386] ACPI Warning: _BQC
@@ -14351,57 +15724,69 @@ klog
klog ADVICE: The ACPI Method returned an incorrect type, this
klog should be fixed.
klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 30.140339] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.PCI0.LPCB.ECDV.ECR1] (Node
-klog ffff880217050ce0), AE_TIME
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 30.140339] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.PCI0.LPCB.ECDV.ECR1]
+klog (Node ffff880217050ce0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 30.140421] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECRB] (Node
+klog ffff880217050e00), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 30.140448] ACPI Error (psparse-0537):
+klog Method parse/execution failed [ECG5] (Node
+klog ffff880217050ee0), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
+klog
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 30.140475] ACPI Error (psparse-0537):
+klog Method parse/execution failed [_SB_.AC__._PSR] (Node
+klog ffff880217052420), AE_TIME
+klog
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 30.140421] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECRB] (Node ffff880217050e00), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 30.140448] ACPI Error (psparse-0537): Method parse
-klog /execution failed [ECG5] (Node ffff880217050ee0), AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiTimeOut: Test 1, HIGH Kernel message
-klog : [ 30.140475] ACPI Error (psparse-0537): Method parse
-klog /execution failed [_SB_.AC__._PSR] (Node ffff880217052420)
-klog , AE_TIME
-klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
-klog
-klog FAILED [HIGH] KlogAcpiExecFailure: Test 1, HIGH Kernel
-klog message: [ 42.490181] ACPI Error: [_SB_.VDRV] Namespace
-klog lookup failure, AE_NOT_FOUND (20110112/psargs-359)
+klog FAILED [HIGH] KlogAcpiNamespaceLookupFailure: Test 1, HIGH
+klog Kernel message: [ 42.490181] ACPI Error: [_SB_.VDRV]
+klog Namespace lookup failure, AE_NOT_FOUND (20110112
+klog /psargs-359)
klog
-klog ADVICE: The kernel has most probably detected an error
-klog while executing ACPI AML. The error lists the ACPI driver
-klog module and the line number where the bug has been caught
-klog and the method that caused the error.
+klog ADVICE: The kernel has detected an error trying to execute
+klog an Method and it cannot find an object. This is indicates
+klog a bug in the DSDT or SSDT AML code.
klog
-klog FAILED [HIGH] KlogAcpiObjectNotFound: Test 1, HIGH Kernel
-klog message: [ 42.490202] ACPI Error: Method parse/execution
-klog failed [_SB_.PCI0.LPC0.H_EC._Q51] (Node ffff88003d9b1e60),
-klog AE_NOT_FOUND (20110112/psparse-536)
+klog FAILED [HIGH] KlogAcpiParseExecAmlFailed: Test 1, HIGH
+klog Kernel message: [ 42.490202] ACPI Error: Method parse
+klog /execution failed [_SB_.PCI0.LPC0.H_EC._Q51] (Node
+klog ffff88003d9b1e60), AE_NOT_FOUND (20110112/psparse-536)
klog
-klog ADVICE: This is a bug picked up by the kernel, but as yet,
-klog the firmware test suite has no diagnostic advice for this
-klog particular problem.
+klog ADVICE: The ACPI driver encounter a parse or execution
+klog error on some ACPI AML code. This is unexepcted and
+klog normally indicates that there is a bug in the compiled AML
+klog code. It could be a programming fault or an AML compiler
+klog issue. See acpi_ps_parse_aml().
klog
klog FAILED [HIGH] KlogAcpiReturnTypeMismatch: Test 1, HIGH
klog Kernel message: [ 44.661543] ACPI Warning for
--
1.8.0
More information about the fwts-devel
mailing list