[Bug 1950906] Re: etc/rc.local should Want or Require network-online.target

[Igel Kun]

I must agree with Michael Tokarev. I too decideed to do some local stuff
using rc-local and now my bootup hangs unneccessarily for a few seconds
each time waiting for NetworkManager to establish a connection.

Here's a crazy idea: why not have an rc-local-with-network in which one
can dump all the local stuff that needs networking and everything else
can go into the normal rc-local? I'll go configure this right now on my
system :)

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1950906

Title:
  etc/rc.local should Want or Require network-online.target

Status in systemd package in Ubuntu:
  New

Bug description:
  The fix for bug #1451797 introduced /lib/systemd/system/rc-
  local.service.d/debian.conf with the intent that rc.local would always
  run after the network was fully online. However, it only has an After=
  line, without actually pulling in network-online.target. Systemd docs
  say:

  "Units that strictly require a configured network connection should pull in network-online.target (via a Wants= type dependency) and order themselves after it. ... Note the distinction between this unit and network.target. This unit is an active unit (i.e. pulled in by the consumer rather than the
  provider of this functionality) ... Usually, network.target is part of the boot of most systems, while network-online.target is not ..."

  TL;DR - need to add "Wants=network-online.target" to
  /lib/systemd/system/rc-local.service.d/debian.conf :)

  ProblemType: Bug
  DistroRelease: Ubuntu 20.04
  Package: systemd 245.4-4ubuntu3.13
  ProcVersionSignature: Ubuntu 5.4.0-90.101-generic 5.4.148
  Uname: Linux 5.4.0-90-generic x86_64
  ApportVersion: 2.20.11-0ubuntu27.21
  Architecture: amd64
  CasperMD5CheckResult: skip
  CurrentDesktop: Xpra
  CurrentDmesg: Error: command ['dmesg'] failed with exit code 1: dmesg: read kernel buffer failed: Operation not permitted
  Date: Sun Nov 14 17:22:54 2021
  InstallationDate: Installed on 2017-01-08 (1771 days ago)
  InstallationMedia: Xubuntu 16.04 LTS "Xenial Xerus" - Release amd64 (20160420.1)
  Lsusb:
   Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
   Bus 001 Device 003: ID 10c4:ea60 Silicon Labs CP210x UART Bridge
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  Lsusb-t:
   /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/4p, 5000M
   /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci_hcd/10p, 480M
       |__ Port 9: Dev 3, If 0, Class=Vendor Specific Class, Driver=cp210x, 12M
  MachineType: Dell Inc. OptiPlex 3040
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-5.4.0-90-generic root=/dev/mapper/lvg2-host ro rootflags=subvol=rootfs rw drm.edid_firmware=edid/toguard2.bin video=HDMI-A-1:1024x768 at 60D
  SourcePackage: systemd
  UpgradeStatus: Upgraded to focal on 2021-09-02 (73 days ago)
  acpidump:
   
  dmi.bios.date: 06/30/2016
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.4.6
  dmi.board.name: 0TTDMJ
  dmi.board.vendor: Dell Inc.
  dmi.board.version: A00
  dmi.chassis.type: 3
  dmi.chassis.vendor: Dell Inc.
  dmi.modalias: dmi:bvnDellInc.:bvr1.4.6:bd06/30/2016:svnDellInc.:pnOptiPlex3040:pvr:rvnDellInc.:rn0TTDMJ:rvrA00:cvnDellInc.:ct3:cvr:
  dmi.product.name: OptiPlex 3040
  dmi.product.sku: 06BB
  dmi.sys.vendor: Dell Inc.
  mtime.conffile..etc.systemd.logind.conf: 2019-03-03T09:57:30.814201

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1950906/+subscriptions