[Bug 1819442] [NEW] Cannot boot installer on platforms requiring Device Tree

[AArch64]

Private bug reported:

In the past, when booting Linux on non-(x84_64|i386) machines, it was a
requirement to configure and build Linux kernels tailored specifically
for a particular device.  Now, after many efforts ("one image to rule
them all" and the like) to unify and consolidate vendor fragmentation,
it is now possible to boot Single Board Computers (SBCs) of similar core
architectures with one single binary image.

In order to make this possible Linux is provided with a description of
the hardware it is expected to operate on.  There are currently two main
technologies which provide these functionality; Advanced Configuration
and Power Interface (ACPI) and Device Tree (DT).  This report only deals
with Device Tree (DT).

In an ideal world firmware installed onto a device would be readily
upgradable and thus provide Linux with an up-to-date hardware
description that it can work with.  However, there are some devices
which do not contain either capable or upgradable (or both) firmware, so
this information has to be sought from elsewhere.

The kernel packages provided by the Ubuntu build system do contain pre-
compiled Device Tree Binaries (DTBs) for currently supported hardware,
however these do not make it into the Ubuntu Installers.  Instead only a
single kernel binary exists which expects to be informed of platform
specifics via ACPI tables provided by the platform's firmware.  This
means that many devices which could easily be supported by the Ubuntu
Installer, are not.

There are a couple of ideas which we'd like to put forward to start the
conversation off:

 1. Place all supported DTBs into the installer
 2. Allow for a small writable partition on the install media for a user to place a DTB
 3. Enable Grub to be able to pick a DTB from a menu at boot time

At worst case, as long as the DTBs find their way into the installer a
user can manually add a 'devicetree' (similar to 'linux' and 'initrd')
entry to the Grub menuentry, which would also achieve the aim.

Any help to boot such devices would be gratefully received.

** Affects: debian-installer (Ubuntu)
     Importance: Undecided
         Status: Invalid

** Information type changed from Public to Private

** Changed in: debian-installer (Ubuntu)
       Status: New => Invalid

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to debian-installer in Ubuntu.
https://bugs.launchpad.net/bugs/1819442

Title:
  Cannot boot installer on platforms requiring Device Tree

Status in debian-installer package in Ubuntu:
  Invalid

Bug description:
  In the past, when booting Linux on non-(x84_64|i386) machines, it was
  a requirement to configure and build Linux kernels tailored
  specifically for a particular device.  Now, after many efforts ("one
  image to rule them all" and the like) to unify and consolidate vendor
  fragmentation, it is now possible to boot Single Board Computers
  (SBCs) of similar core architectures with one single binary image.

  In order to make this possible Linux is provided with a description of
  the hardware it is expected to operate on.  There are currently two
  main technologies which provide these functionality; Advanced
  Configuration and Power Interface (ACPI) and Device Tree (DT).  This
  report only deals with Device Tree (DT).

  In an ideal world firmware installed onto a device would be readily
  upgradable and thus provide Linux with an up-to-date hardware
  description that it can work with.  However, there are some devices
  which do not contain either capable or upgradable (or both) firmware,
  so this information has to be sought from elsewhere.

  The kernel packages provided by the Ubuntu build system do contain
  pre-compiled Device Tree Binaries (DTBs) for currently supported
  hardware, however these do not make it into the Ubuntu Installers.
  Instead only a single kernel binary exists which expects to be
  informed of platform specifics via ACPI tables provided by the
  platform's firmware.  This means that many devices which could easily
  be supported by the Ubuntu Installer, are not.

  There are a couple of ideas which we'd like to put forward to start
  the conversation off:

   1. Place all supported DTBs into the installer
   2. Allow for a small writable partition on the install media for a user to place a DTB
   3. Enable Grub to be able to pick a DTB from a menu at boot time

  At worst case, as long as the DTBs find their way into the installer a
  user can manually add a 'devicetree' (similar to 'linux' and 'initrd')
  entry to the Grub menuentry, which would also achieve the aim.

  Any help to boot such devices would be gratefully received.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/debian-installer/+bug/1819442/+subscriptions