[Bug 1677504] [NEW] samba failed to install

Thu Mar 30 07:52:14 UTC 2017

Public bug reported:

sudo apt-get install samba
Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  dh-translations dia-libs gfortran gfortran-5 gnome-control-center-data
  gnome-icon-theme gnome-icon-theme-symbolic gnome-settings-daemon
  iio-sensor-proxy intltool launchpad-getkeys libblas-dev libbz2-dev
  libcairo-script-interpreter2 libcolord-gtk1 libdbus-1-dev libegl1-mesa-dev
  libepoxy-dev libfontconfig1-dev libfreetype6-dev libgfortran-5-dev
  libgmp-dev libgmpxx4ldbl libharfbuzz-dev libharfbuzz-gobject0 libice-dev
  libjavascriptcoregtk-3.0-0 libjpeg-dev libjpeg-turbo8-dev libjpeg8-dev
  liblapack-dev liblzma-dev libmirclient-dev libmircommon-dev libmircookie-dev
  libmircookie2 libncurses5-dev libpixman-1-dev libpng12-dev libprotobuf-dev
  libpython-all-dev libpython-dev libpython2.7-dev libreadline-dev
  libreadline6-dev libsm-dev libtinfo-dev libwayland-dev libwebkitgtk-3.0-0
  libwebkitgtk-3.0-common libxcb-shm0-dev libxcomposite-dev libxcursor-dev
  libxft-dev libxi-dev libxinerama-dev libxkbcommon-dev libxrandr-dev
  libxrender-dev libxtst-dev nettle-dev planner-data planner-doc ppa-purge
  scrollkeeper x11proto-composite-dev x11proto-randr-dev x11proto-record-dev
  x11proto-render-dev x11proto-xinerama-dev xclip yad
Use 'sudo apt autoremove' to remove them.
The following additional packages will be installed:
  python-samba python-talloc samba-common-bin samba-dsdb-modules samba-libs
  samba-vfs-modules
Suggested packages:
  bind9 bind9utils ctdb ldb-tools ntp smbldap-tools winbind heimdal-clients
The following NEW packages will be installed:
  python-samba python-talloc samba samba-common-bin samba-dsdb-modules
  samba-libs samba-vfs-modules
0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
32 not fully installed or removed.
Need to get 8,119 kB of archives.
After this operation, 45.7 MB of additional disk space will be used.
Do you want to continue? [Y/n] 
Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-talloc amd64 2.1.5-2 [7,506 B]
Get:2 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-libs amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [5,176 kB]
Get:3 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python-samba amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [1,060 kB]
Get:4 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-common-bin amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [506 kB]
Get:5 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [899 kB]
Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-dsdb-modules amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [215 kB]
Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-vfs-modules amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [256 kB]
Fetched 8,119 kB in 20s (388 kB/s)                                             
Selecting previously unselected package python-talloc.
(Reading database ... 287850 files and directories currently installed.)
Preparing to unpack .../python-talloc_2.1.5-2_amd64.deb ...
Unpacking python-talloc (2.1.5-2) ...
Selecting previously unselected package samba-libs:amd64.
Preparing to unpack .../samba-libs_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
Unpacking samba-libs:amd64 (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Selecting previously unselected package python-samba.
Preparing to unpack .../python-samba_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
Unpacking python-samba (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Selecting previously unselected package samba-common-bin.
Preparing to unpack .../samba-common-bin_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
Unpacking samba-common-bin (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Selecting previously unselected package samba.
Preparing to unpack .../samba_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
Unpacking samba (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Selecting previously unselected package samba-dsdb-modules.
Preparing to unpack .../samba-dsdb-modules_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
Unpacking samba-dsdb-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Selecting previously unselected package samba-vfs-modules.
Preparing to unpack .../samba-vfs-modules_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
Unpacking samba-vfs-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Processing triggers for libc-bin (2.23-0ubuntu7) ...
Processing triggers for man-db (2.7.5-1) ...
Processing triggers for ureadahead (0.100.0-19) ...
Processing triggers for ufw (0.35-0ubuntu2) ...
Processing triggers for systemd (229-4ubuntu16) ...
Setting up python-dbus (1.2.0-3) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-dbus (--configure):
 subprocess installed post-installation script returned error exit status 1
Setting up python-gobject-2 (2.28.6-12ubuntu1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-gobject-2 (--configure):
 subprocess installed post-installation script returned error exit status 1
Setting up python-gi (3.20.0-0ubuntu1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-gi (--configure):
 subprocess installed post-installation script returned error exit status 1
dpkg: dependency problems prevent configuration of python-gobject:
 python-gobject depends on python-gi (>= 3.20.0-0ubuntu1); however:
  Package python-gi is not configured yet.
 python-gobject depends on python-gobject-2; however:
  Package python-gobject-2 is not configured yet.

dpkg: error processing package python-gobject (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              Setting up python-cairo (1.8.8-2) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-cairo (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of python-gtk2:
 python-gtk2 depends on python-cairo (>= 1.0.2-1.1); however:
  Package python-cairo is not configured yet.
 python-gtk2 depends on python-gobject-2 (>= 2.21.3); however:
  Package python-gobject-2 is not configured yet.

dpkg: error processing package python-gtk2 (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              Setting up python-libxml2 (2.9.3+dfsg1-1ubuntu0.2) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-libxml2 (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of font-manager:
 font-manager depends on python-dbus; however:
  Package python-dbus is not configured yet.
 font-manager depends on python-gobject; however:
  Package python-gobject is not configured yet.
 font-manager depends on python-gtk2; however:
  Package python-gtk2 is not configured yet.
 font-manager depends on python-libxml2; however:
  Package python-libxml2 is not configured yet.

dpkg: error processing package font-manager (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of gimp:
 gimp depends on python-gtk2 (>= 2.8.0); however:
  Package python-gtk2 is not configured yet.

dpkg: error processing package gimp (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              Setting up libglib2.0-dev (2.48.2-0ubuntu1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package libglib2.0-dev (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-mysql.connector (2.0.4-1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-mysql.connector (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of mysql-utilities:
 mysql-utilities depends on python-mysql.connector (>= 1.2.1); however:
  Package python-mysql.connector is not configured yet.

dpkg: error processing package mysql-utilities (--configure):
 dependency problems - leaving unconfigured
Setting up python-crypto (2.6.1-6ubuntu0.16.04.2) ...
No apport report written because MaxReports is reached already
                                                              Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-crypto (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-six (1.10.0-3) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-six (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of python-ecdsa:
 python-ecdsa depends on python-six (>= 1.2); however:
  Package python-six is not configured yet.

dpkg: error processing package python-ecdsa (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python-paramiko:
 python-paramiko depends on python-crypto (>= 2.1.0-2); however:
  Package python-crypto is not configured yet.
 python-paramiko depends on python-ecdsa; however:
  Package python-ecdsa is not configured yet.

dpkg: error processing package python-paramiko (--configure):
No apport report written because MaxReports is reached already
                                                              No apport report written because MaxReports is reached already
                                             dependency problems - leaving unconfigured
Setting up python-ptyprocess (0.5-1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-ptyprocess (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of python-pexpect:
 python-pexpect depends on python-ptyprocess; however:
  Package python-ptyprocess is not configured yet.

dpkg: error processing package python-pexpect (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              Setting up python-pysqlite2 (2.7.0-1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-pysqlite2 (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of mysql-workbench:
 mysql-workbench depends on python-mysql.connector; however:
  Package python-mysql.connector is not configured yet.
 mysql-workbench depends on python-paramiko; however:
  Package python-paramiko is not configured yet.
 mysql-workbench depends on python-pexpect; however:
  Package python-pexpect is not configured yet.
 mysql-workbench depends on python-pysqlite2; however:
  Package python-pysqlite2 is not configured yet.

dpkg: error processing package mysql-workbench (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of python-appindicator:
 python-appindicator depends on python-gobject; however:
  Package python-gobject is not configured yet.

dpkg: error processing package python-appindicator (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              Setting up python-apt (1.1.0~beta1build1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-apt (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-dnspython (1.12.0-1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-dnspython (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-ldb (2:1.1.24-1ubuntu3) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-ldb (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-pip (8.1.1-2ubuntu0.4) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-pip (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-pkg-resources (20.7.0-1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-pkg-resources (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of python-scour:
 python-scour depends on python-six (>= 1.9.0); however:
  Package python-six is not configured yet.
 python-scour depends on python-pkg-resources; however:
  Package python-pkg-resources is not configured yet.

dpkg: error processing package python-scour (--configure):
 dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of python-setuptools:
 python-setuptools depends on python-pkg-resources (= 20.7.0-1); however:
  Package python-pkg-resources is not configured yet.

dpkg: error processing package python-setuptools (--configure):
 dependency problems - leaving unconfigured
Setting up python-sip (4.17+dfsg-1build1) ...
No apport report written because MaxReports is reached already
                                                              No apport report written because MaxReports is reached already
                                            Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-sip (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-tdb (1.3.8-2) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-tdb (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              Setting up python-wheel (0.29.0-1) ...
Traceback (most recent call last):
  File "/usr/bin/pycompile", line 35, in <module>
    from debpython.version import SUPPORTED, debsorted, vrepr, \
  File "/usr/share/python/debpython/version.py", line 24, in <module>
    from ConfigParser import SafeConfigParser
ImportError: No module named 'ConfigParser'
dpkg: error processing package python-wheel (--configure):
 subprocess installed post-installation script returned error exit status 1
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of qtiplot:
 qtiplot depends on sip-api-11.2; however:
  Package sip-api-11.2 is not installed.
  Package python-sip which provides sip-api-11.2 is not configured yet.

dpkg: error processing package qtiplot (--configure):
 dependency problems - leaving unconfigured
Setting up python-talloc (2.1.5-2) ...
No apport report written because MaxReports is reached already
                                                              Setting up samba-libs:amd64 (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
dpkg: dependency problems prevent configuration of python-samba:
 python-samba depends on python-crypto; however:
  Package python-crypto is not configured yet.
 python-samba depends on python-ldb (>= 1.1.2~); however:
  Package python-ldb is not configured yet.
 python-samba depends on python-tdb; however:
  Package python-tdb is not configured yet.

dpkg: error processing package python-samba (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of samba-common-bin:
 samba-common-bin depends on python-samba; however:
  Package python-samba is not configured yet.

dpkg: error processing package samba-common-bin (--configure):
 dependency problems - leaving unconfigured
No apport report written because MaxReports is reached already
                                                              dpkg: dependency problems prevent configuration of samba:
 samba depends on python-dnspython; however:
  Package python-dnspython is not configured yet.
 samba depends on python-samba; however:
  Package python-samba is not configured yet.
 samba depends on samba-common-bin (= 2:4.3.11+dfsg-0ubuntu0.16.04.5); however:
  Package samba-common-bin is not configured yet.

dpkg: error processing package samba (--configure):
 dependency problems - leaving unconfigured
Setting up samba-dsdb-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
No apport report written because MaxReports is reached already
                                                              Setting up samba-vfs-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
Processing triggers for libc-bin (2.23-0ubuntu7) ...
Errors were encountered while processing:
 python-dbus
 python-gobject-2
 python-gi
 python-gobject
 python-cairo
 python-gtk2
 python-libxml2
 font-manager
 gimp
 libglib2.0-dev
 python-mysql.connector
 mysql-utilities
 python-crypto
 python-six
 python-ecdsa
 python-paramiko
 python-ptyprocess
 python-pexpect
 python-pysqlite2
 mysql-workbench
 python-appindicator
 python-apt
 python-dnspython
 python-ldb
 python-pip
 python-pkg-resources
 python-scour
 python-setuptools
 python-sip
 python-tdb
 python-wheel
 qtiplot
 python-samba
 samba-common-bin
 samba
E: Sub-process /usr/bin/dpkg returned an error code (1)

** Affects: dbus-python (Ubuntu)
     Importance: Undecided
         Status: New

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to dbus-python in Ubuntu.
https://bugs.launchpad.net/bugs/1677504

Title:
  samba failed to install

Status in dbus-python package in Ubuntu:
  New

Bug description:
  sudo apt-get install samba
  Reading package lists... Done
  Building dependency tree       
  Reading state information... Done
  The following packages were automatically installed and are no longer required:
    dh-translations dia-libs gfortran gfortran-5 gnome-control-center-data
    gnome-icon-theme gnome-icon-theme-symbolic gnome-settings-daemon
    iio-sensor-proxy intltool launchpad-getkeys libblas-dev libbz2-dev
    libcairo-script-interpreter2 libcolord-gtk1 libdbus-1-dev libegl1-mesa-dev
    libepoxy-dev libfontconfig1-dev libfreetype6-dev libgfortran-5-dev
    libgmp-dev libgmpxx4ldbl libharfbuzz-dev libharfbuzz-gobject0 libice-dev
    libjavascriptcoregtk-3.0-0 libjpeg-dev libjpeg-turbo8-dev libjpeg8-dev
    liblapack-dev liblzma-dev libmirclient-dev libmircommon-dev libmircookie-dev
    libmircookie2 libncurses5-dev libpixman-1-dev libpng12-dev libprotobuf-dev
    libpython-all-dev libpython-dev libpython2.7-dev libreadline-dev
    libreadline6-dev libsm-dev libtinfo-dev libwayland-dev libwebkitgtk-3.0-0
    libwebkitgtk-3.0-common libxcb-shm0-dev libxcomposite-dev libxcursor-dev
    libxft-dev libxi-dev libxinerama-dev libxkbcommon-dev libxrandr-dev
    libxrender-dev libxtst-dev nettle-dev planner-data planner-doc ppa-purge
    scrollkeeper x11proto-composite-dev x11proto-randr-dev x11proto-record-dev
    x11proto-render-dev x11proto-xinerama-dev xclip yad
  Use 'sudo apt autoremove' to remove them.
  The following additional packages will be installed:
    python-samba python-talloc samba-common-bin samba-dsdb-modules samba-libs
    samba-vfs-modules
  Suggested packages:
    bind9 bind9utils ctdb ldb-tools ntp smbldap-tools winbind heimdal-clients
  The following NEW packages will be installed:
    python-samba python-talloc samba samba-common-bin samba-dsdb-modules
    samba-libs samba-vfs-modules
  0 upgraded, 7 newly installed, 0 to remove and 0 not upgraded.
  32 not fully installed or removed.
  Need to get 8,119 kB of archives.
  After this operation, 45.7 MB of additional disk space will be used.
  Do you want to continue? [Y/n] 
  Get:1 http://archive.ubuntu.com/ubuntu xenial/main amd64 python-talloc amd64 2.1.5-2 [7,506 B]
  Get:2 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-libs amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [5,176 kB]
  Get:3 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 python-samba amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [1,060 kB]
  Get:4 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-common-bin amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [506 kB]
  Get:5 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [899 kB]
  Get:6 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-dsdb-modules amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [215 kB]
  Get:7 http://archive.ubuntu.com/ubuntu xenial-updates/main amd64 samba-vfs-modules amd64 2:4.3.11+dfsg-0ubuntu0.16.04.5 [256 kB]
  Fetched 8,119 kB in 20s (388 kB/s)                                             
  Selecting previously unselected package python-talloc.
  (Reading database ... 287850 files and directories currently installed.)
  Preparing to unpack .../python-talloc_2.1.5-2_amd64.deb ...
  Unpacking python-talloc (2.1.5-2) ...
  Selecting previously unselected package samba-libs:amd64.
  Preparing to unpack .../samba-libs_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
  Unpacking samba-libs:amd64 (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Selecting previously unselected package python-samba.
  Preparing to unpack .../python-samba_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
  Unpacking python-samba (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Selecting previously unselected package samba-common-bin.
  Preparing to unpack .../samba-common-bin_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
  Unpacking samba-common-bin (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Selecting previously unselected package samba.
  Preparing to unpack .../samba_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
  Unpacking samba (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Selecting previously unselected package samba-dsdb-modules.
  Preparing to unpack .../samba-dsdb-modules_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
  Unpacking samba-dsdb-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Selecting previously unselected package samba-vfs-modules.
  Preparing to unpack .../samba-vfs-modules_2%3a4.3.11+dfsg-0ubuntu0.16.04.5_amd64.deb ...
  Unpacking samba-vfs-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Processing triggers for libc-bin (2.23-0ubuntu7) ...
  Processing triggers for man-db (2.7.5-1) ...
  Processing triggers for ureadahead (0.100.0-19) ...
  Processing triggers for ufw (0.35-0ubuntu2) ...
  Processing triggers for systemd (229-4ubuntu16) ...
  Setting up python-dbus (1.2.0-3) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-dbus (--configure):
   subprocess installed post-installation script returned error exit status 1
  Setting up python-gobject-2 (2.28.6-12ubuntu1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-gobject-2 (--configure):
   subprocess installed post-installation script returned error exit status 1
  Setting up python-gi (3.20.0-0ubuntu1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-gi (--configure):
   subprocess installed post-installation script returned error exit status 1
  dpkg: dependency problems prevent configuration of python-gobject:
   python-gobject depends on python-gi (>= 3.20.0-0ubuntu1); however:
    Package python-gi is not configured yet.
   python-gobject depends on python-gobject-2; however:
    Package python-gobject-2 is not configured yet.

  dpkg: error processing package python-gobject (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                Setting up python-cairo (1.8.8-2) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-cairo (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of python-gtk2:
   python-gtk2 depends on python-cairo (>= 1.0.2-1.1); however:
    Package python-cairo is not configured yet.
   python-gtk2 depends on python-gobject-2 (>= 2.21.3); however:
    Package python-gobject-2 is not configured yet.

  dpkg: error processing package python-gtk2 (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                Setting up python-libxml2 (2.9.3+dfsg1-1ubuntu0.2) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-libxml2 (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of font-manager:
   font-manager depends on python-dbus; however:
    Package python-dbus is not configured yet.
   font-manager depends on python-gobject; however:
    Package python-gobject is not configured yet.
   font-manager depends on python-gtk2; however:
    Package python-gtk2 is not configured yet.
   font-manager depends on python-libxml2; however:
    Package python-libxml2 is not configured yet.

  dpkg: error processing package font-manager (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of gimp:
   gimp depends on python-gtk2 (>= 2.8.0); however:
    Package python-gtk2 is not configured yet.

  dpkg: error processing package gimp (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                Setting up libglib2.0-dev (2.48.2-0ubuntu1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package libglib2.0-dev (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-mysql.connector (2.0.4-1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-mysql.connector (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of mysql-utilities:
   mysql-utilities depends on python-mysql.connector (>= 1.2.1); however:
    Package python-mysql.connector is not configured yet.

  dpkg: error processing package mysql-utilities (--configure):
   dependency problems - leaving unconfigured
  Setting up python-crypto (2.6.1-6ubuntu0.16.04.2) ...
  No apport report written because MaxReports is reached already
                                                                Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-crypto (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-six (1.10.0-3) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-six (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of python-ecdsa:
   python-ecdsa depends on python-six (>= 1.2); however:
    Package python-six is not configured yet.

  dpkg: error processing package python-ecdsa (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of python-paramiko:
   python-paramiko depends on python-crypto (>= 2.1.0-2); however:
    Package python-crypto is not configured yet.
   python-paramiko depends on python-ecdsa; however:
    Package python-ecdsa is not configured yet.

  dpkg: error processing package python-paramiko (--configure):
  No apport report written because MaxReports is reached already
                                                                No apport report written because MaxReports is reached already
                                               dependency problems - leaving unconfigured
  Setting up python-ptyprocess (0.5-1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-ptyprocess (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of python-pexpect:
   python-pexpect depends on python-ptyprocess; however:
    Package python-ptyprocess is not configured yet.

  dpkg: error processing package python-pexpect (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                Setting up python-pysqlite2 (2.7.0-1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-pysqlite2 (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of mysql-workbench:
   mysql-workbench depends on python-mysql.connector; however:
    Package python-mysql.connector is not configured yet.
   mysql-workbench depends on python-paramiko; however:
    Package python-paramiko is not configured yet.
   mysql-workbench depends on python-pexpect; however:
    Package python-pexpect is not configured yet.
   mysql-workbench depends on python-pysqlite2; however:
    Package python-pysqlite2 is not configured yet.

  dpkg: error processing package mysql-workbench (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of python-appindicator:
   python-appindicator depends on python-gobject; however:
    Package python-gobject is not configured yet.

  dpkg: error processing package python-appindicator (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                Setting up python-apt (1.1.0~beta1build1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-apt (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-dnspython (1.12.0-1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-dnspython (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-ldb (2:1.1.24-1ubuntu3) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-ldb (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-pip (8.1.1-2ubuntu0.4) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-pip (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-pkg-resources (20.7.0-1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-pkg-resources (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of python-scour:
   python-scour depends on python-six (>= 1.9.0); however:
    Package python-six is not configured yet.
   python-scour depends on python-pkg-resources; however:
    Package python-pkg-resources is not configured yet.

  dpkg: error processing package python-scour (--configure):
   dependency problems - leaving unconfigured
  dpkg: dependency problems prevent configuration of python-setuptools:
   python-setuptools depends on python-pkg-resources (= 20.7.0-1); however:
    Package python-pkg-resources is not configured yet.

  dpkg: error processing package python-setuptools (--configure):
   dependency problems - leaving unconfigured
  Setting up python-sip (4.17+dfsg-1build1) ...
  No apport report written because MaxReports is reached already
                                                                No apport report written because MaxReports is reached already
                                              Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-sip (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-tdb (1.3.8-2) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-tdb (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                Setting up python-wheel (0.29.0-1) ...
  Traceback (most recent call last):
    File "/usr/bin/pycompile", line 35, in <module>
      from debpython.version import SUPPORTED, debsorted, vrepr, \
    File "/usr/share/python/debpython/version.py", line 24, in <module>
      from ConfigParser import SafeConfigParser
  ImportError: No module named 'ConfigParser'
  dpkg: error processing package python-wheel (--configure):
   subprocess installed post-installation script returned error exit status 1
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of qtiplot:
   qtiplot depends on sip-api-11.2; however:
    Package sip-api-11.2 is not installed.
    Package python-sip which provides sip-api-11.2 is not configured yet.

  dpkg: error processing package qtiplot (--configure):
   dependency problems - leaving unconfigured
  Setting up python-talloc (2.1.5-2) ...
  No apport report written because MaxReports is reached already
                                                                Setting up samba-libs:amd64 (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  dpkg: dependency problems prevent configuration of python-samba:
   python-samba depends on python-crypto; however:
    Package python-crypto is not configured yet.
   python-samba depends on python-ldb (>= 1.1.2~); however:
    Package python-ldb is not configured yet.
   python-samba depends on python-tdb; however:
    Package python-tdb is not configured yet.

  dpkg: error processing package python-samba (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of samba-common-bin:
   samba-common-bin depends on python-samba; however:
    Package python-samba is not configured yet.

  dpkg: error processing package samba-common-bin (--configure):
   dependency problems - leaving unconfigured
  No apport report written because MaxReports is reached already
                                                                dpkg: dependency problems prevent configuration of samba:
   samba depends on python-dnspython; however:
    Package python-dnspython is not configured yet.
   samba depends on python-samba; however:
    Package python-samba is not configured yet.
   samba depends on samba-common-bin (= 2:4.3.11+dfsg-0ubuntu0.16.04.5); however:
    Package samba-common-bin is not configured yet.

  dpkg: error processing package samba (--configure):
   dependency problems - leaving unconfigured
  Setting up samba-dsdb-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  No apport report written because MaxReports is reached already
                                                                Setting up samba-vfs-modules (2:4.3.11+dfsg-0ubuntu0.16.04.5) ...
  Processing triggers for libc-bin (2.23-0ubuntu7) ...
  Errors were encountered while processing:
   python-dbus
   python-gobject-2
   python-gi
   python-gobject
   python-cairo
   python-gtk2
   python-libxml2
   font-manager
   gimp
   libglib2.0-dev
   python-mysql.connector
   mysql-utilities
   python-crypto
   python-six
   python-ecdsa
   python-paramiko
   python-ptyprocess
   python-pexpect
   python-pysqlite2
   mysql-workbench
   python-appindicator
   python-apt
   python-dnspython
   python-ldb
   python-pip
   python-pkg-resources
   python-scour
   python-setuptools
   python-sip
   python-tdb
   python-wheel
   qtiplot
   python-samba
   samba-common-bin
   samba
  E: Sub-process /usr/bin/dpkg returned an error code (1)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dbus-python/+bug/1677504/+subscriptions