[Bug 311705] Re: no mouse control following sleep recovery

[Ransom stark]

Thank you for taking the time to report this bug and helping to make
Ubuntu better. We are sorry that we do not always have the capacity to
look at all reported bugs in a timely manner. There have been many
changes in Ubuntu since that time you reported the bug and your problem
may have been fixed with some of the updates. It would help us a lot if
you could test it on a currently supported Ubuntu version. When you test
it and it is still an issue, kindly upload the updated logs by running
apport-collect <bug #> and any other logs that are relevant for this
particular issue.

** Changed in: acpi-support (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to acpi-support in Ubuntu.
https://bugs.launchpad.net/bugs/311705

Title:
  no mouse control following sleep recovery

Status in acpi-support package in Ubuntu:
  Incomplete

Bug description:
  I have no mouse control following sleep recovery.Unplugging and replugging my mouse usb connector does not help.
  However plugging into the P2S socket with an adapter does allow all mouse gestures,but unfortunately prevents power management settings to work.
                                                      Bob McM

   Ps I have updated to Intrepid and my mouse is a Logitech optical.Following Ardaunus instructions as best I can I include the following:
                 	Capabilities: [80] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: uhci_hcd
  	Kernel modules: uhci-hcd

  03:06.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 65) (prog-if 20)
  	Subsystem: VIA Technologies, Inc. USB 2.0
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64, Cache Line Size: 64 bytes
  	Interrupt: pin C routed to IRQ 23
  	Region 0: Memory at febfec00 (32-bit, non-prefetchable) [size=256]
  	Capabilities: [80] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: ehci_hcd
  	Kernel modules: ehci-hcd

  	Capabilities: [80] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: uhci_hcd
  	Kernel modules: uhci-hcd

  03:06.2 0c03: 1106:3104 (rev 65) (prog-if 20)
  	Subsystem: 1106:3104
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64, Cache Line Size: 64 bytes
  	Interrupt: pin C routed to IRQ 23
  	Region 0: Memory at febfec00 (32-bit, non-prefetchable) [size=256]
  	Capabilities: [80] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: ehci_hcd
  	Kernel modules: ehci-hcd

  Size: No Module Installed
  	Form Factor: DIMM
  	Set: None
  	Locator: DIMM_B2
  	Bank Locator: BANK3
  	Type: SDRAM
  	Type Detail: None
  	Speed: Unknown
  	Manufacturer: Manufacturer3
  	Serial Number: SerNum3
  	Asset Tag: AssetTagNum3
  	Part Number: PartNum3

  Handle 0x0044, DMI type 126, 19 bytes
  Inactive

  Handle 0x0045, DMI type 32, 20 bytes
  System Boot Information
  	Status: No errors detected

  Handle 0x0046, DMI type 127, 4 bytes
  End Of Table
                                                                                           Bob McM

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/acpi-support/+bug/311705/+subscriptions