[Bug 1326854] Please test proposed package
Chris J Arges
1326854 at bugs.launchpad.net
Wed Aug 12 15:39:45 UTC 2015
Hello Karl-Philipp, or anyone else affected,
Accepted ifenslave into trusty-proposed. The package will build now and
be available at
https://launchpad.net/ubuntu/+source/ifenslave/2.4ubuntu1.1 in a few
hours, and then in the -proposed repository.
Please help us by testing this new package. See
https://wiki.ubuntu.com/Testing/EnableProposed for documentation how to
enable and use -proposed. Your feedback will aid us getting this update
out to other Ubuntu users.
If this package fixes the bug for you, please add a comment to this bug,
mentioning the version of the package you tested, and change the tag
from verification-needed to verification-done. If it does not fix the
bug for you, please add a comment stating that, and change the tag to
verification-failed. In either case, details of your testing will help
us make a better decision.
Further information regarding the verification process can be found at
https://wiki.ubuntu.com/QATeam/PerformingSRUVerification . Thank you in
advance!
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ifenslave-2.6 in Ubuntu.
https://bugs.launchpad.net/bugs/1326854
Title:
ambiguous error message "sh: echo: I/O error"
Status in ifenslave-2.6 package in Ubuntu:
Fix Released
Status in ifenslave-2.6 source package in Trusty:
In Progress
Bug description:
[SRU justification]
[Impact]
Without this patch, trying to add a bond when this one is already
defined leads to the following error :
Example :
# ifenslave bond0 eth1 eth2
sh: echo: I/O error
eth1: could not add interface
[Test Case]
For info, the ambiguous message only appears when using ifenslave on a
bond that is already configured :
# ifconfig eth1 up
# ifconfig eth2 up
# ifconfig bond0 up
# ifenslave bond0 eth1 eth2 <<<< No error on the first execution
# ifenslave bond0 eth1 eth2
sh: echo: I/O error
eth1: could not add interface
[Regression Potential]
None expected as the same commit is already in use in the ifenslave
package for Wily and in the upstream debian package.
[Original description of the problem]
adding an interface to a bonding interface can result in the error
message "sh: echo: I/O error" which is highly ambiguous (did the I/O
error occur in sh, echo or is it an I/O error realted to the
command/driver? - at least change this to "I/O error occured" which is
still not helpful ("I/O occured in the kernel driver, please make sure
it supports XY, check with <Z>" would be nice), but at least not
confusing.
reproduction:
/etc/wpa_supplicant/wpa_supplicant.conf
<code>
network={
ssid="assid"
key_mgmt=WPA-EAP
eap=TTLS
proto=WPA RSN
identity="anidentity at adomain.com"
anonymous_identity="anonymous at adomain.de"
ca_cert="/etc/wpa_supplicant/deutsche-telekom-root-ca-2.crt"
phase2="auth=PAP"
}
</code>
/etc/network/interfaces
<code>
iface main inet dhcp
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
iface bond0 inet manual
down ifenslave -d bond0 wlan0 wlan1
bond-mode active-backup
bond-miimon 100
bond-slaves wlan0 wlan1
allow-bond0 wlan0
iface wlan0 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
bond-master bond0
allow-bond0 wlan1
iface wlan1 inet manual
wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf
bond-master bond0
iface eth1 inet dhcp
</code>
my commands
<code>
sudo modprobe bonding
sudo ifup wlan0
sudo ifup wlan1
sudo ifconfig bond0 # no DHCP example, so I've not idea how to get this running :( just providing a way to reproduce the error message (which should in no case be shown with its current content)
sudo ifenslave bond0 wlan0 wlan1
</code>
I'm not requesting support here, just to fix the bug which should make
the former unnecessary anyway :)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ifenslave-2.6/+bug/1326854/+subscriptions
More information about the foundations-bugs
mailing list