[Bug 1280366] Re: Bonding mode ignored

Wed Feb 19 13:44:33 UTC 2014

** Changed in: ifenslave (Ubuntu)
       Status: New => Confirmed

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ifenslave-2.6 in Ubuntu.
https://bugs.launchpad.net/bugs/1280366

Title:
  Bonding mode ignored

Status in “ifenslave” package in Ubuntu:
  Confirmed
Status in “ifenslave-2.6” package in Ubuntu:
  Confirmed

Bug description:
  Description:	Ubuntu Trusty Tahr (development branch)
  Release:	14.04

  dmesg | grep -i bond:

  [   19.892794] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  [   20.158210] bonding: bond1 is being created...
  [   20.159780] bonding: bond1 is being created...
  [   20.159787] bonding: bond1 already exists.
  [   20.161217] IPv6: ADDRCONF(NETDEV_UP): bond1: link is not ready
  [   20.161612] IPv6: ADDRCONF(NETDEV_UP): bond0: link is not ready
  [   20.163026] bonding: bond1: Adding slave p4p3.
  [   20.312122] bonding: bond1: enslaving p4p3 as an active interface with an up link.
  [   20.312127] bonding: bond1: Adding slave p4p2.
  [   20.560093] bonding: bond1: enslaving p4p2 as an active interface with an up link.
  [   20.560097] bonding: bond0: Adding slave p2p1.
  [   21.413473] bonding: bond0: enslaving p2p1 as an active interface with an up link.
  [   21.413478] bonding: bond1: Adding slave p4p4.
  [   21.724028] bonding: bond1: enslaving p4p4 as an active interface with an up link.
  [   21.724031] bonding: bond0: Adding slave p3p1.
  [   22.569597] bonding: bond0: enslaving p3p1 as an active interface with an up link.
  [   22.570594] IPv6: ADDRCONF(NETDEV_CHANGE): bond1: link becomes ready
  [   22.570616] IPv6: ADDRCONF(NETDEV_CHANGE): bond0: link becomes ready
  [   22.572252] bonding: bond1: Adding slave p4p1.
  [   22.763939] bonding: bond1: enslaving p4p1 as an active interface with an up link.
  [   22.764926] bonding: bond0: setting xmit hash policy to layer2+3 (2).
  [   22.764955] bonding: bond0: Setting MII monitoring interval to 100.
  [   22.764971] bonding: bond0: Setting down delay to 100.
  [   22.764984] bonding: bond0: Setting up delay to 100.
  [   22.765013] bonding: bond1: setting xmit hash policy to layer2+3 (2).
  [   22.765048] bonding: bond1: Setting MII monitoring interval to 100.
  [   22.765070] bonding: bond1: Setting down delay to 100.
  [   22.765090] bonding: bond1: Setting up delay to 100.
  [   22.766243] bonding: bond0: unable to update mode because bond has slaves.
  [   22.772965] bonding: bond1: unable to update mode because bond has slaves.
  [   22.779884] bonding: bond0: Unable to update LACP rate because bond is not in 802.3ad mode.
  [   22.836748] bonding: bond1: Unable to update LACP rate because bond is not in 802.3ad mode.

  settings in /etc/network/interfaces:

  # This file describes the network interfaces available on your system
  # and how to activate them. For more information, see interfaces(5).

  # The loopback network interface
  auto lo
  iface lo inet loopback

  #

  # p2p1 is manually configured and slave to the "bond0" bonded NIC
  auto p2p1
  iface p2p1 inet manual
  mtu 9000
  bond-master bond0

  # p3p1 is manually configured and slave to the "bond0" bonded NIC
  auto p3p1
  iface p3p1 inet manual
  mtu 9000
  bond-master bond0

  # bond0 is the bonded NIC and can be used as any other normal NIC
  # bond0 is configured using static network information
  auto bond0
  iface bond0 inet static
  address 192.168.1.14
  gateway 192.168.1.1
  netmask 255.255.255.0
  mtu 9000

  # bond0 uses standard IEEE 802.3ad LACP bonding protocol
  bond-mode 4
  bond-miimon 100
  bond-lacp-rate 1
  bond-xmit-hash-policy layer2+3
  bond-downdelay 100
  bond-updelay 100
  bond-slaves p2p1 p3p1

  #

  # p4p1 is manually configured and slave to the "bond1" bonded NIC
  auto p4p1
  iface p4p1 inet manual
  mtu 9000
  bond-master bond1

  # p4p2 is manually configured and slave to the "bond1" bonded NIC
  auto p4p2
  iface p4p2 inet manual
  mtu 9000
  bond-master bond1

  # p4p3 is manually configured and slave to the "bond1" bonded NIC
  auto p4p3
  iface p4p3 inet manual
  mtu 9000
  bond-master bond1

  # p4p4 is manually configured and slave to the "bond1" bonded NIC
  auto p4p4
  iface p4p4 inet manual
  mtu 9000
  bond-master bond1

  # bond1 is the bonded NIC and can be used as any other normal NIC
  # bond1 is configured using static network information
  auto bond1
  iface bond1 inet static
  address 192.168.0.4
  netmask 255.255.255.0
  mtu 9000

  # bond1 uses standard IEEE 802.3ad LACP bonding protocol
  bond-mode 4
  bond-miimon 100
  bond-lacp-rate 1
  bond-xmit-hash-policy layer2+3
  bond-downdelay 100
  bond-updelay 100
  bond-slaves p4p1 p4p2 p4p3 p4p4

  ---
  ApportVersion: 2.13.2-0ubuntu3
  Architecture: amd64
  DistroRelease: Ubuntu 14.04
  InstallationDate: Installed on 2014-02-14 (0 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS "Trusty Tahr" - Alpha amd64 (20140214)
  Package: ifenslave 2.4
  PackageArchitecture: all
  ProcVersionSignature: Ubuntu 3.13.0-8.28-generic 3.13.2
  Tags:  trusty
  Uname: Linux 3.13.0-8-generic x86_64
  UpgradeStatus: No upgrade log present (probably fresh install)
  UserGroups:

  _MarkForUpload: True

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ifenslave/+bug/1280366/+subscriptions