[Bug 1091464] Re: Unable to chainload Windows 8 with Secure Boot enabled

Ivan Noris 1091464 at bugs.launchpad.net
Sat Feb 8 16:38:44 UTC 2014


Hello,

I'm also having the "cannot load image" error with SecureBoot=enabled after the installation of Ubuntu 13.10 on Lenovo ThinkPad Edge E330 (with pre-installed Windows 8).
Windows 8 was booting normally before the installation.
Ubuntu was installed during SecureBoot=enabled from USB key.
Ubuntu is booting normally after the installation.
Windows 8 is not booting from GRUB ("cannot load image") after the installation.
I've "temporarily" disabled SecureBoot, which seems to work (both operating systems are bootable and working).

FWIW, the Ubuntu 13.10 installer did NOT detect Windows8 OS during the
installation.

Ivan

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to grub2 in Ubuntu.
https://bugs.launchpad.net/bugs/1091464

Title:
  Unable to chainload Windows 8 with Secure Boot enabled

Status in “grub2” package in Ubuntu:
  Confirmed

Bug description:
  I've been working with Yannubuntu and he suggested I post a bug here.
  Here's what I did.

  Received a brand new Dell XPS13 laptop with Windows8 pre-installed
  with both UEFI and SecureBoot enabled.    After playing around,
  decided to wipe everything and create a dual boot configuration with
  both Windows 8 and Ubuntu 12.10.  Steps:

  1. Install Windows 8 via Dell supplied recovery media in UEFI mode.  The installer will create the /boot/efi, recovery and main partition.  
  2. Use Windows 8 to resize hard drive down to 50GB.  Use the rest for Ubuntu.
  3. Verify the computer boots successfully to Windows 8 with UEFI and Secure Boot enabled.
  4. Boot with USB Ubuntu install media and select 'do something else' to create partitions and indicate /boot/efi
  5. Let the install complete.  Normally here, I run boot repair because the signed bootloader doesn't seem to install.  In boot repair, I use advance options, indicate where the EFI boot should go, primary OS (ubuntu) and select SecureBoot.
  6. Now, everything is configured as I want it.  Upon boot up, the computer will boot to grub and then I can go to either Ubuntu or Windows UEFI.  
  7. Upon selecting Windows UEFI, I get the error:

   /EndEntire
  file path: /ACPI(a0341d0,0)/PCI(2,1f)/UnknownMessaging(12)/HD(2,96800,32000,7c043777b8608641,87,f6)/File(\EFI\Microsoft\Boot)/File(bootmgfw.efi)/EndEntire
  error: cannot load image

  8.  If I swap the order in the BIOS to boot to Windows first (with UEFI and Secure Boot) it directly boots to Windows so I know the EFI boot files are working.
  9. If I go back to my original configuration (e.g. Ubuntu first) with UEFI, but Secure Boot disabled, then the system is able to successfully chainload the MSFT boot files.

  My gut tells me that grub is unable to chainload to an OS (or maybe
  just windows 8) which is expecting a secure boot to be initiated from
  the UEFI bios.

  As a work around, I have disabled Secure Boot, but I'd like my
  ultimate configuration to support Secure Booting to either Ubuntu or
  Windows 8 via grub.

  Thanks,

  Neeraj

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1091464/+subscriptions



More information about the foundations-bugs mailing list