[Bug 1347776] Re: shutdown trigger on gpio_keys.X for armhf hardware

Launchpad Bug Tracker 1347776 at bugs.launchpad.net
Thu Aug 7 11:16:50 UTC 2014


This bug was fixed in the package systemd - 208-7ubuntu4

---------------
systemd (208-7ubuntu4) utopic; urgency=medium

  * Lower Breaks: to lvm2 again. Our lvm2 package has always used udev for
    device setup, and thus should be compatible with systemd, too.
 -- Martin Pitt <martin.pitt at ubuntu.com>   Thu, 07 Aug 2014 07:11:28 +0200

** Changed in: systemd (Ubuntu Utopic)
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to systemd in Ubuntu.
https://bugs.launchpad.net/bugs/1347776

Title:
  shutdown trigger on gpio_keys.X for armhf hardware

Status in “systemd” package in Ubuntu:
  Fix Released
Status in “systemd” source package in Trusty:
  Fix Committed
Status in “systemd” source package in Utopic:
  Fix Released

Bug description:
  Some ARM board uses GPIO gpio_key.12 for power control (key=116). The
  proposed patch adds entry to logind's 70-power-switch.rules to
  initiate soft shutdown of the cartridge from ilo.

  Here is the udevadm output for /dev/input/event0

  sudo udevadm info --query=all --name=/dev/input/event0 --attribute-
  walk

  Udevadm info starts with the device specified by the devpath and then
  walks up the chain of parent devices. It prints for every device
  found, all possible attributes in the udev rules key format.
  A rule to match, can be composed by the attributes of the device
  and the attributes from one single parent device.

    looking at device '/devices/soc.3/gpio_keys.12/input/input0/event0':
      KERNEL=="event0"
      SUBSYSTEM=="input"
      DRIVER==""

    looking at parent device '/devices/soc.3/gpio_keys.12/input/input0':
      KERNELS=="input0"
      SUBSYSTEMS=="input"
      DRIVERS==""
      ATTRS{name}=="gpio_keys.12"
      ATTRS{phys}=="gpio-keys/input0"
      ATTRS{uniq}==""
      ATTRS{properties}=="0"

    looking at parent device '/devices/soc.3/gpio_keys.12':
      KERNELS=="gpio_keys.12"
      SUBSYSTEMS=="platform"
      DRIVERS=="gpio-keys"
      ATTRS{keys}=="116"
      ATTRS{switches}==""
      ATTRS{disabled_keys}==""
      ATTRS{disabled_switches}==""

    looking at parent device '/devices/soc.3':
      KERNELS=="soc.3"
      SUBSYSTEMS=="platform"
      DRIVERS==""

  Regarding the possibility of gpio_key.12 being used by other systems
  to map to some other trigger, I put in the check that the gpio_key.12
  is associated with power control (keys=116). '116' is supposedly linux
  generic power control in DTS. There is no uniq idSystem or idVendor
  for device /dev/input/event0 as you can see from udevadm output,
  therefore I tried to use the best available combination as a safety
  check. This patch will enable power control for any system vendor
  (Other than the one the patch in intended for) that describes in DTS,
  the trigger gpio_key.12 as power control (116).

  
  SRU Request
  ==========

  [Impact]

  * User won't be able to initiate a soft shutdown from the chassis
  manager.

  [Test Case]

  * To reproduce this bug, initiate a soft shutdown from the chassis manager, for example from ilo you could do
  <ilo> set node power off shutdown <node number>

  [Test Result]

  == BEFORE PATCH ==

  $ cat /lib/udev/rules.d/70-power-switch.rules
  # This file is part of systemd.
  #
  # systemd is free software; you can redistribute it and/or modify it
  # under the terms of the GNU Lesser General Public License as published by
  # the Free Software Foundation; either version 2.1 of the License, or
  # (at your option) any later version.

  ACTION=="remove", GOTO="power_switch_end"

  SUBSYSTEM=="input", KERNEL=="event*", SUBSYSTEMS=="acpi", TAG+="power-switch"
  SUBSYSTEM=="input", KERNEL=="event*", KERNELS=="thinkpad_acpi", TAG+="power-switch"

  LABEL="power_switch_end"
  $

  </>hpiLO-> set node power off shutdown c3n2

    c3: #Cartridge 3
      c3n2: #Node 2 Shutting node down gracefully

  hpiLO-> show node list

  Slot ID Proc Manufacturer Architecture Memory Power Health
  ---- ----- ---------------------- -------------------- ------ ----- ------
    3 c3n1 **** ARM Architecture 8 GB On OK
    3 c3n2 **** ARM Architecture 8 GB On OK
    3 c3n3 **** ARM Architecture 8 GB On OK
    3 c3n4 **** ARM Architecture 8 GB Off OK

  hpiLO->

  == AFTER PATCH ==

  hpiLO-> set node power off shutdown c3n1

    c3: #Cartridge 3
      c3n1: #Node 1 Shutting node down gracefully

  hpiLO-> show node list

  Slot ID Proc Manufacturer Architecture Memory Power Health
  ---- ----- ---------------------- -------------------- ------ ----- ------
    3 c3n1 **** ARM Architecture 8 GB Off OK
    3 c3n2 **** ARM Architecture 8 GB On OK
    3 c3n3 **** ARM Architecture 8 GB On OK
    3 c3n4 **** ARM Architecture 8 GB Off OK

  hpiLO->

  [Regression Potential]

  None.
  Note: Regarding the possibility of gpio_key.12 being used by other systems to map to some other trigger, I put in the check that the gpio_key.12 is associated with power control (keys=116). '116' is supposedly linux generic power control in DTS.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/systemd/+bug/1347776/+subscriptions



More information about the foundations-bugs mailing list