[Bug 1225617] Re: Acpi does not recognize a power cable unplug leading to weird battery and power saving issues

[Axx83]

If I unplug the cable:

me at me-Aspire-S7-391:~$ acpi -b
Battery 0: Full, 100%, rate information unavailable

after I unplugged the cable
me at me-Aspire-S7-391:~$ acpi -b
Battery 0: Discharging, 100%, 03:47:59 remaining

while acpitool reads
me at me-Aspire-S7-391:~$ acpitool -a -b
  Battery #1     : Discharging, 100.0%, 00:00:00
  AC adapter     : off-line

if I plug it back in (apci_listen has the same readings as reported)
me at me-Aspire-S7-391:~$ acpi -b
Battery 0: Charging, 94%, 00:20:16 until charged

me at me-Aspire-S7-391:~$ acpitool -a -b
  Battery #1     : Charging, 95.08%, 00:20:00
  AC adapter     : online

but apci_listen still saw reversed, I unplug it says plugged, I plug
back in it says unplugged and stays like this

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to acpi-support in Ubuntu.
https://bugs.launchpad.net/bugs/1225617

Title:
  Acpi does not recognize a power cable unplug leading to weird battery
  and power saving issues

Status in “acpi-support” package in Ubuntu:
  New
Status in “pm-utils” package in Ubuntu:
  New

Bug description:
  On my Acer Aspire S7-391 with Intel Ivy Bridge when going from AC to
  Battery acpi does not recognize the unplug, instead it sees the cable
  being plugged again:

  me at me-Aspire-S7-391:~$ acpi_listen
  ac_adapter ACAD 00000080 00000001
  battery BAT0 00000080 00000001
  processor CPU0 00000081 00000000
  processor CPU1 00000081 00000000
  processor CPU2 00000081 00000000
  processor CPU3 00000081 00000000

  when I plug the cable back in for real it sees

  lele at lele-Aspire-S7-391:~$ acpi_listen
  ac_adapter ACAD 00000080 00000000
  battery BAT0 00000080 00000001
  processor CPU0 00000081 00000000
  processor CPU1 00000081 00000000
  processor CPU2 00000081 00000000
  processor CPU3 00000081 00000000

  as if the cable was beign unplugged.

  At the same time pm-powersave will not run when unplugging but will
  run twice, first TRUE and then FALSE, when re-plugging.

  ProblemType: Bug
  DistroRelease: Ubuntu 13.04
  Package: pm-utils 1.4.1-9git1ubuntu0.1
  ProcVersionSignature: Ubuntu 3.8.0-30.44-generic 3.8.13.6
  Uname: Linux 3.8.0-30-generic x86_64
  ApportVersion: 2.9.2-0ubuntu8.3
  Architecture: amd64
  Date: Sun Sep 15 10:46:45 2013
  InstallationDate: Installed on 2013-08-31 (14 days ago)
  InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release amd64 (20130424)
  MarkForUpload: True
  PackageArchitecture: all
  SourcePackage: pm-utils
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/acpi-support/+bug/1225617/+subscriptions