[Bug 1224007] Re: mtu not always set properly on bond/vlan interface
Chris J Arges
1224007 at bugs.launchpad.net
Fri Nov 8 21:36:13 UTC 2013
*** This bug is a duplicate of bug 1065077 ***
https://bugs.launchpad.net/bugs/1065077
The "Waiting on network configuration" is most likely caused by bug 1065077.
I think using the documented method the real bug is this, and thus I'll mark it a duplicate.
** This bug has been marked a duplicate of bug 1065077
Ifenslave pre-up doesn't wait for slaves when usr is a seperate partition
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ifupdown in Ubuntu.
https://bugs.launchpad.net/bugs/1224007
Title:
mtu not always set properly on bond/vlan interface
Status in “ifupdown” package in Ubuntu:
New
Status in “ifupdown” package in Debian:
New
Bug description:
* Description
When configuring a network with bonding+vlan and setting the MTU,
occasionally the MTU doesn't get set properly on the vlan interface.
In addition if one checks /var/log/upstart/networking.log whenever there is a failure the following message is printed:
SIOCSIFMTU: Numerical result out of range
I've tested the latest ifupdown package (0.7.44) and the problem still exists.
Multi/single CPU settings both exhibit the issue.
* Versions
This affects latest ifupdown and ubuntu p/q/r/s.
* Test Case
# Create a p/q/r/s server vm with two network interfaces
# This is reproducible on real hardware as well
# Install the following
sudo apt-get install vlan ifenslave-2.6 bridge-utils
sudo modprobe bonding 8021q
# Edit the interfaces file
/etc/networking/interfaces:
auto bond0
iface bond0 inet manual
bond-mode 802.3ad
bond-miimon 100
bond-lacp-rate 1
bond-slaves eth0 eth1
post-up ifconfig bond0 mtu 9000
auto eth0
iface eth0 inet manual
bond-master bond0
post-up ifconfig eth0 mtu 9000
auto eth1
iface eth1 inet manual
bond-master bond0
post-up ifconfig eth1 mtu 9000
auto bond0.123
iface bond0.123 inet static
address 192.168.122.68
netmask 255.255.255.0
gateway 192.168.122.1
post-up ifconfig bond0.123 mtu 9000
# edit rc.local (or another startup script) so we reboot until we hit the error
/etc/rc.local:
DEVS="eth0 eth1 bond0 bond0.123"
for d in $DEVS; do
mtu=$(cat /sys/class/net/$d/mtu)
if [ $mtu != 9000 ]; then
echo "FAIL"
exit 1
fi
done
reboot
exit 0
# Now reboot the machine, within 10m or so you should be at the login prompt
# if you ifconfig | grep MTU you will see some of our interfaces did not get
# the MTU properly set and the test failed.
# Essentially we want to ensure that all MTU's (except lo) were set to 9000
* Workaround
Change the bond0.123 post-up command to:
post-up sleep 2 && ifconfig bond0.123 mtu 9000
Now when rebooting the interfaces will all be brought up with the
proper MTU.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/1224007/+subscriptions
More information about the foundations-bugs
mailing list