[Bug 1091272] Re: hdparm ignores standby timeout option

[vsespb]

looks like duplicate
https://bugs.launchpad.net/ubuntu/+source/hdparm/+bug/875719

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to hdparm in Ubuntu.
https://bugs.launchpad.net/bugs/1091272

Title:
  hdparm ignores standby timeout option

Status in “hdparm” package in Ubuntu:
  Confirmed

Bug description:
  Steps to Reproduce :
  sudo hdparm -S 1 /dev/sda
  sudo hdparm -S 12 /dev/sda
  sudo hdparm -S 60 /dev/sda

  Expected Results:
  Drive should go to sleep in 5 seconds.
  Drive should go to sleep in 1 minute.
  Drive should go to sleep in 5 minutes.

  Actual Results:
  Drive goes to sleep in 10 minutes.
  Drive goes to sleep in 10 minutes.
  Drive goes to sleep in 10 minutes.

  Regression:
  Ubuntu Server 12.10 (64-bit)
  hdparm 9.37-0ubuntu4

  Notes:
  <file system>    <mount point>    <type>
  /dev/sda1    /srv    ext4
  /dev/sdb1    /    ext4
  /dev/sdb2    none    swap

  sudo hdparm -i /dev/sda

  /dev/sda:

   Model=WDC WD5000BPVT-80HXZT3, FwRev=01.01A01, SerialNo=
   Config={ HardSect NotMFM HdSw>15uSec SpinMotCtl Fixed DTR>5Mbs FmtGapReq }
   RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=50
   BuffType=unknown, BuffSize=8192kB, MaxMultSect=16, MultSect=16
   CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=976773168
   IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
   PIO modes:  pio0 pio3 pio4 
   DMA modes:  mdma0 mdma1 mdma2 
   UDMA modes: udma0 udma1 *udma2 udma3 udma4 udma5 udma6 
   AdvancedPM=yes: unknown setting WriteCache=enabled
   Drive conforms to: Unspecified:  ATA/ATAPI-1,2,3,4,5,6,7

   * signifies the current active mode

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/hdparm/+bug/1091272/+subscriptions