[Bug 1143495] Re: udisks reporting input/output error that seems to be nonsense
hookerjay
1143495 at bugs.launchpad.net
Sat Mar 23 18:35:45 UTC 2013
Having the same issue with an IDE WDC drive. Works fine in Windows and
when mounted in Linux Mint 14.
My SATA based WDC drives are not affected.
Here's a log of "inxi -fxxx" if it helps ...
----
System: Host: <redacted> Kernel: 3.5.0-26-generic i686 (32 bit, gcc: 4.7.2) Desktop: Gnome Distro: Linux Mint 14 Nadia
Machine: Mobo: Gigabyte model: M57SLI-S4 version: x.x Bios: Award version: FHa date: 04/23/2008
CPU: Dual core AMD Athlon 64 X2 5200+ (-MCP-) cache: 1024 KB flags: (lm nx sse sse2 sse3 svm) bmips: 10850
Clock Speeds: 1: 2712.503 MHz 2: 2712.503 MHz
Graphics: Card: Advanced Micro Devices [AMD] nee ATI RV515 [Radeon X1300] bus-ID: 02:00.0
X.Org: 1.13.0 drivers: ati,radeon (unloaded: fbdev,vesa) Resolution: 1440x900 at 60.1hz
GLX Renderer: Gallium 0.4 on ATI RV515 GLX Version: 2.1 Mesa 9.0.2 Direct Rendering: Yes
Audio: Card: Creative Labs SB X-Fi driver: snd_ctxfi port: 8000 bus-ID: 01:08.0 Sound: ALSA ver: 1.0.25
Network: Card: NVIDIA MCP55 Ethernet driver: forcedeth port: e400 bus-ID: 00:08.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 00:1d:7d:d6:61:8b
Drives: HDD Total Size: 410.1GB (1.2% used) 1: id: /dev/sda model: WDC_WD2500JB size: 250.1GB serial: WD-WMAEP2579168
2: id: /dev/sdb model: WDC_WD800JD size: 80.0GB serial: WD-WMAM9P293246
3: id: /dev/sdc model: WDC_WD800JD size: 80.0GB serial: WD-WMAM9P341257
Partition: ID: / size: 19G used: 4.1G (23%) fs: ext4 ID: /home size: 51G used: 495M (2%) fs: ext4
ID: swap-1 size: 4.09GB used: 0.01GB (0%) fs: swap
RAID: System: supported: N/A
No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Unused Devices: none
Sensors: System Temperatures: cpu: 14.0C mobo: N/A
Fan Speeds (in rpm): cpu: N/A
Info: Processes: 143 Uptime: 4:29 Memory: 422.8/1002.9MB Runlevel: 2 Gcc sys: 4.7.2 alt: 4.4 Client: Shell inxi: 1.8.4
---
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to udisks in Ubuntu.
https://bugs.launchpad.net/bugs/1143495
Title:
udisks reporting input/output error that seems to be nonsense
Status in ATA S.M.A.R.T. Disk Health Monitoring Library:
Confirmed
Status in abstraction for enumerating and managing block devices:
Unknown
Status in “libatasmart” package in Ubuntu:
Confirmed
Status in “udisks” package in Ubuntu:
Invalid
Status in “udisks2” package in Ubuntu:
Invalid
Bug description:
My syslog is full of entries that look like this:
Mar 3 12:06:45 faldara udisksd[2630]: Error performing housekeeping
for drive
/org/freedesktop/UDisks2/drives/WDC_WD360GD_00FNA0_WD_WMAH91337618:
Error updating SMART data: sk_disk_smart_status: Input/output error
(udisks-error-quark, 0)
And opening the disks utility shows invalid smart data, and choosing
to update the smart data also reports an I/O error. Using smartctl on
the command line though says this disk is fine:
root at faldara:~# smartctl -a /dev/sdc
smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-7-generic] (local build)
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Raptor
Device Model: WDC WD360GD-00FNA0
Serial Number: WD-WMAH91337618
Firmware Version: 35.06K35
User Capacity: 37,019,566,080 bytes [37.0 GB]
Sector Size: 512 bytes logical/physical
Device is: In smartctl database [for details use: -P show]
ATA Version is: 6
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Sun Mar 3 23:25:55 2013 EST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: ( 1572) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
No General Purpose Logging support.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 28) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0007 088 084 021 Pre-fail Always - 2100
4 Start_Stop_Count 0x0032 095 095 040 Old_age Always - 5566
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x000b 200 200 051 Pre-fail Always - 0
9 Power_On_Hours 0x0032 080 080 000 Old_age Always - 14706
10 Spin_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
11 Calibration_Retry_Count 0x0013 100 100 051 Pre-fail Always - 0
12 Power_Cycle_Count 0x0032 095 095 000 Old_age Always - 5255
194 Temperature_Celsius 0x0022 109 253 000 Old_age Always - 34
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0012 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0012 200 200 000 Old_age Always - 0
199 UDMA_CRC_Error_Count 0x000a 200 253 000 Old_age Always - 0
200 Multi_Zone_Error_Rate 0x0009 200 125 051 Pre-fail Offline - 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Extended offline Completed without error 00% 942 -
# 2 Extended offline Completed without error 00% 232 -
# 3 Extended offline Completed without error 00% 145 -
# 4 Extended offline Completed without error 00% 62 -
# 5 Extended offline Completed without error 00% 761 -
# 6 Extended offline Completed without error 00% 562 -
# 7 Extended offline Completed without error 00% 696 -
# 8 Extended offline Completed without error 00% 192 -
# 9 Extended offline Completed without error 00% 888 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
root at faldara:~#
To manage notifications about this bug go to:
https://bugs.launchpad.net/libatasmart/+bug/1143495/+subscriptions
More information about the foundations-bugs
mailing list