[Bug 964882] Re: Static IPv6 configuration fails in lxc guests because of readonly /proc/sys

[Serge Hallyn]

You should be able to add a custom, read-write /sys mount using the
example under "Adding custom mounts to the “Hello World” container" at
http://berrange.com/posts/2011/09/27/getting-started-with-lxc-using-
libvirt/ should work, as the custom mounts are done after the readonly
/sys mount.

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ifupdown in Ubuntu.
https://bugs.launchpad.net/bugs/964882

Title:
  Static IPv6 configuration fails in lxc guests because of readonly
  /proc/sys

Status in “ifupdown” package in Ubuntu:
  Invalid
Status in “libvirt” package in Ubuntu:
  Confirmed

Bug description:
  This is a complex issue, libvirt driver for lxc sets /proc and
  /proc/sys as readonly which can be seen as a good thing, however ifup
  wants to set sysctl net.ipv6.conf.eth0.autoconf=0 which fails and ifup
  exits early failing to set the ip address of the interface.

  STR:

  1. Create a precise VM using lxc-create
  2. Inside the rootfs, modify the /etc/network/interfaces to read something like:
  ```
  auto lo
  iface lo inet loopback

  # The primary network interface
  auto eth0
  iface eth0 inet static
      address 192.168.1.20
      netmask 255.255.255.0
      network 192.168.1.0
      broadcast 192.168.1.255
      gateway 192.168.1.1

  iface eth0 inet6 static
      address 2a01:d0:801a::2:1
      netmask 64
      gateway 2a01:d0:801a::1
  ```
  Feel free to change the address/gateway - those are used by my machines now.

  3. Boot the container.

  Expected results:
  IPv6 address is assigned.

  Actual results:
  There is no IPv6 address assigned.
  Attempting to ifdown eth0 fails because it is seen as not configured, ifup eth0 fails right after configuring the ipv4 connection, when it disables autoconfiguration using sysctl.

  One can work around this using a terrible hack of replacing sysctl
  with some sort of script or binary that returns successfully on every
  request.

  ProblemType: Bug
  DistroRelease: Ubuntu 12.04
  Package: libvirt-bin 0.9.8-2ubuntu14
  ProcVersionSignature: Ubuntu 3.2.0-20.32-generic 3.2.12
  Uname: Linux 3.2.0-20-generic x86_64
  ApportVersion: 1.95-0ubuntu1
  Architecture: amd64
  Date: Mon Mar 26 02:56:35 2012
  InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Alpha amd64 (20120225)
  SourcePackage: libvirt
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ifupdown/+bug/964882/+subscriptions