[Bug 915626] Re: usb-creator-gtk crashed with SIGSEGV
Christopher M. Penalver
christopher.m.penalver at gmail.com
Wed Dec 19 17:33:23 UTC 2012
** Tags removed: bugpattern-needed
** Description changed:
1) lsb_release -rd
Description: Ubuntu 12.10
Release: 12.10
2) apt-cache policy usb-creator-gtk
usb-creator-gtk:
- Installed: 0.2.40ubuntu1
- Candidate: 0.2.40ubuntu1
- Version table:
- *** 0.2.40ubuntu1 0
- 500 http://archive.ubuntu.com/ubuntu/ quantal/main i386 Packages
- 100 /var/lib/dpkg/status
+ Installed: 0.2.40ubuntu1
+ Candidate: 0.2.40ubuntu1
+ Version table:
+ *** 0.2.40ubuntu1 0
+ 500 http://archive.ubuntu.com/ubuntu/ quantal/main i386 Packages
+ 100 /var/lib/dpkg/status
3) What is expected to happen via USB disk formatted FAT32 by gparted, is when one types at a terminal:
usb-creator-gtk
Under Source disk image (.iso) or CD:
xubuntu-12.04.1-alternate-i386.iso
Under Disk to use:
SanDisk Cruzer Blade (/dev/sdb1)
- click button Make Startup Disk and it does so successfully.
+ click radio button Discard on shutdown, unless you save them elsewhere
+ -> click button Make Startup Disk and it does so successfully.
4) What happens instead is after a while, a window pops up requesting
one to type in their credentials. Once complete, it immediately crashes.
This happens consistently and prevents one from creating a startup disk
successfully.
Successfully installed this iso by formatting drive in Windows 7, and
creating bootable USB disk via unetbootin in Windows 7, hence hardware
is not faulty.
sudo lsusb -v
[CUT]
Bus 002 Device 005: ID 0781:5567 SanDisk Corp. Cruzer Blade
Device Descriptor:
- bLength 18
- bDescriptorType 1
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- idVendor 0x0781 SanDisk Corp.
- idProduct 0x5567 Cruzer Blade
- bcdDevice 1.00
- iManufacturer 1 SanDisk
- iProduct 2 Cruzer Blade
- iSerial 3 2005355082076CB031B6
- bNumConfigurations 1
- Configuration Descriptor:
- bLength 9
- bDescriptorType 2
- wTotalLength 32
- bNumInterfaces 1
- bConfigurationValue 1
- iConfiguration 0
- bmAttributes 0x80
- (Bus Powered)
- MaxPower 200mA
- Interface Descriptor:
- bLength 9
- bDescriptorType 4
- bInterfaceNumber 0
- bAlternateSetting 0
- bNumEndpoints 2
- bInterfaceClass 8 Mass Storage
- bInterfaceSubClass 6 SCSI
- bInterfaceProtocol 80 Bulk-Only
- iInterface 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x81 EP 1 IN
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 0
- Endpoint Descriptor:
- bLength 7
- bDescriptorType 5
- bEndpointAddress 0x02 EP 2 OUT
- bmAttributes 2
- Transfer Type Bulk
- Synch Type None
- Usage Type Data
- wMaxPacketSize 0x0200 1x 512 bytes
- bInterval 1
+ bLength 18
+ bDescriptorType 1
+ bcdUSB 2.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ idVendor 0x0781 SanDisk Corp.
+ idProduct 0x5567 Cruzer Blade
+ bcdDevice 1.00
+ iManufacturer 1 SanDisk
+ iProduct 2 Cruzer Blade
+ iSerial 3 2005355082076CB031B6
+ bNumConfigurations 1
+ Configuration Descriptor:
+ bLength 9
+ bDescriptorType 2
+ wTotalLength 32
+ bNumInterfaces 1
+ bConfigurationValue 1
+ iConfiguration 0
+ bmAttributes 0x80
+ (Bus Powered)
+ MaxPower 200mA
+ Interface Descriptor:
+ bLength 9
+ bDescriptorType 4
+ bInterfaceNumber 0
+ bAlternateSetting 0
+ bNumEndpoints 2
+ bInterfaceClass 8 Mass Storage
+ bInterfaceSubClass 6 SCSI
+ bInterfaceProtocol 80 Bulk-Only
+ iInterface 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x81 EP 1 IN
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 0
+ Endpoint Descriptor:
+ bLength 7
+ bDescriptorType 5
+ bEndpointAddress 0x02 EP 2 OUT
+ bmAttributes 2
+ Transfer Type Bulk
+ Synch Type None
+ Usage Type Data
+ wMaxPacketSize 0x0200 1x 512 bytes
+ bInterval 1
Device Qualifier (for other device speed):
- bLength 10
- bDescriptorType 6
- bcdUSB 2.00
- bDeviceClass 0 (Defined at Interface level)
- bDeviceSubClass 0
- bDeviceProtocol 0
- bMaxPacketSize0 64
- bNumConfigurations 1
+ bLength 10
+ bDescriptorType 6
+ bcdUSB 2.00
+ bDeviceClass 0 (Defined at Interface level)
+ bDeviceSubClass 0
+ bDeviceProtocol 0
+ bMaxPacketSize0 64
+ bNumConfigurations 1
Device Status: 0x0000
- (Bus Powered)
+ (Bus Powered)
ProblemType: Crash
DistroRelease: Ubuntu 12.04
Package: usb-creator-gtk 0.2.35.1
ProcVersionSignature: Ubuntu 3.2.0-8.15-generic 3.2.0
Uname: Linux 3.2.0-8-generic x86_64
ApportVersion: 1.90-0ubuntu1
Architecture: amd64
Date: Thu Jan 12 12:05:13 2012
ExecutablePath: /usr/bin/usb-creator-gtk
InstallationMedia: Xubuntu 12.04 "Precise Pangolin" - Alpha amd64 (20120109)
InterpreterPath: /usr/bin/python2.7
ProcCmdline: /usr/bin/python /usr/bin/usb-creator-gtk
ProcEnviron:
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
SegvAnalysis:
Segfault happened at: 0x7f4b135fe6c0: movl $0xffffffff,0x4(%rdi)
PC (0x7f4b135fe6c0) ok
source "$0xffffffff" ok
destination "0x4(%rdi)" (0x00000004) not located in a known VMA region (needed writable region)!
SegvReason: writing NULL VMA
Signal: 11
SourcePackage: usb-creator
StacktraceTop:
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
Title: usb-creator-gtk crashed with SIGSEGV
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to udisks in Ubuntu.
https://bugs.launchpad.net/bugs/915626
Title:
usb-creator-gtk crashed with SIGSEGV
Status in “udisks” package in Ubuntu:
Confirmed
Status in “usb-creator” package in Ubuntu:
Confirmed
Status in “udisks” source package in Quantal:
Confirmed
Status in “usb-creator” source package in Quantal:
Triaged
Bug description:
1) lsb_release -rd
Description: Ubuntu 12.10
Release: 12.10
2) apt-cache policy usb-creator-gtk
usb-creator-gtk:
Installed: 0.2.40ubuntu1
Candidate: 0.2.40ubuntu1
Version table:
*** 0.2.40ubuntu1 0
500 http://archive.ubuntu.com/ubuntu/ quantal/main i386 Packages
100 /var/lib/dpkg/status
3) What is expected to happen via USB disk formatted FAT32 by gparted, is when one types at a terminal:
usb-creator-gtk
Under Source disk image (.iso) or CD:
xubuntu-12.04.1-alternate-i386.iso
Under Disk to use:
SanDisk Cruzer Blade (/dev/sdb1)
click radio button Discard on shutdown, unless you save them elsewhere
-> click button Make Startup Disk and it does so successfully.
4) What happens instead is after a while, a window pops up requesting
one to type in their credentials. Once complete, it immediately
crashes. This happens consistently and prevents one from creating a
startup disk successfully.
Successfully installed this iso by formatting drive in Windows 7, and
creating bootable USB disk via unetbootin in Windows 7, hence hardware
is not faulty.
sudo lsusb -v
[CUT]
Bus 002 Device 005: ID 0781:5567 SanDisk Corp. Cruzer Blade
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0781 SanDisk Corp.
idProduct 0x5567 Cruzer Blade
bcdDevice 1.00
iManufacturer 1 SanDisk
iProduct 2 Cruzer Blade
iSerial 3 2005355082076CB031B6
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
(Bus Powered)
MaxPower 200mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk-Only
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0200 1x 512 bytes
bInterval 1
Device Qualifier (for other device speed):
bLength 10
bDescriptorType 6
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
bNumConfigurations 1
Device Status: 0x0000
(Bus Powered)
ProblemType: Crash
DistroRelease: Ubuntu 12.04
Package: usb-creator-gtk 0.2.35.1
ProcVersionSignature: Ubuntu 3.2.0-8.15-generic 3.2.0
Uname: Linux 3.2.0-8-generic x86_64
ApportVersion: 1.90-0ubuntu1
Architecture: amd64
Date: Thu Jan 12 12:05:13 2012
ExecutablePath: /usr/bin/usb-creator-gtk
InstallationMedia: Xubuntu 12.04 "Precise Pangolin" - Alpha amd64 (20120109)
InterpreterPath: /usr/bin/python2.7
ProcCmdline: /usr/bin/python /usr/bin/usb-creator-gtk
ProcEnviron:
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
SegvAnalysis:
Segfault happened at: 0x7f4b135fe6c0: movl $0xffffffff,0x4(%rdi)
PC (0x7f4b135fe6c0) ok
source "$0xffffffff" ok
destination "0x4(%rdi)" (0x00000004) not located in a known VMA region (needed writable region)!
SegvReason: writing NULL VMA
Signal: 11
SourcePackage: usb-creator
StacktraceTop:
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
?? () from /lib/x86_64-linux-gnu/libdbus-1.so.3
Title: usb-creator-gtk crashed with SIGSEGV
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/udisks/+bug/915626/+subscriptions
More information about the foundations-bugs
mailing list