[Bug 1043403] Re: Wireless not active during installation or after boot
Lars Noodén
lars.nooden at gmail.com
Thu Aug 30 13:54:39 UTC 2012
I've tried adding 'pci=biosirq' to the boot options for linux via grub.
I could not notice any change. What is it likely to affect? It still
appears disabled.
$ sudo rfkill list all
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
$ sudo lshw -C network
*-network:0 DISABLED
description: Wireless interface
product: RT2561/RT61 802.11g PCI
vendor: Ralink corp.
physical id: 6
bus info: pci at 0000:00:06.0
logical name: wlan0
version: 00
serial: 00:10:60:67:0b:72
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical wireless
configuration: broadcast=yes driver=rt61pci driverversion=3.5.0-13-generic firmware=N/A latency=64 link=no multicast=yes wireless=IEEE 802.11bg
resources: irq:0 memory:ffff8000-ffffffff
*-network:1
description: Ethernet interface
product: VT6102 [Rhine-II]
vendor: VIA Technologies, Inc.
physical id: 12
bus info: pci at 0000:00:12.0
logical name: eth0
version: 74
serial: 00:40:d0:95:11:55
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=via-rhine driverversion=1.5.0 duplex=full ip=192.168.2.35 latency=128 link=yes maxlatency=8 mingnt=3 multicast=yes port=MII speed=100Mbit/s
resources: irq:11 ioport:e200(size=256) memory:d0000000-d00000ff
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to ubiquity in Ubuntu.
https://bugs.launchpad.net/bugs/1043403
Title:
Wireless not active during installation or after boot
Status in “linux” package in Ubuntu:
Confirmed
Status in “ubiquity” package in Ubuntu:
Invalid
Bug description:
The i386 has a Ralink corp. RT2561/RT61 802.11g PCI wireless card.
However, the installation process seems unable to use it to find any
wireless networks, not even open networks. Same goes after booting
and trying manually.
ProblemType: Bug
DistroRelease: Ubuntu 12.10
Package: ubiquity (not installed)
ProcVersionSignature: Ubuntu 3.5.0-13.13-generic 3.5.3
Uname: Linux 3.5.0-13-generic i686
ApportVersion: 2.5.1-0ubuntu2
Architecture: i386
Date: Wed Aug 29 18:50:47 2012
InstallCmdLine: file=/cdrom/preseed/lubuntu.seed boot=casper only-ubiquity initrd=/casper/initrd.lz quiet splash --
InstallationMedia: Lubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120828)
SourcePackage: ubiquity
UpgradeStatus: No upgrade log present (probably fresh install)
---
AcpiTables:
ApportVersion: 2.5.1-0ubuntu2
Architecture: i386
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/by-path', '/dev/snd/controlC0', '/dev/snd/pcmC0D0c', '/dev/snd/pcmC0D0p', '/dev/snd/pcmC0D1c', '/dev/snd/pcmC0D1p', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
CRDA: Error: [Errno 2] No such file or directory
CurrentDmesg: [ 27.408464] init: lightdm main process (943) terminated with status 1
DistroRelease: Ubuntu 12.10
HibernationDevice: RESUME=UUID=2a0d5ff8-7854-49fd-91e2-be4326cfc418
InstallationMedia: Lubuntu 12.10 "Quantal Quetzal" - Alpha i386 (20120828)
Lsusb:
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
MachineType: Packard Bell Computers International Packard Bell EasyNote
Package: linux (not installed)
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-13-generic root=UUID=1e64a51f-2f5b-4d0f-bb43-88c03014c8b4 ro quiet splash vt.handoff=7
ProcVersionSignature: Ubuntu 3.5.0-13.13-generic 3.5.3
RelatedPackageVersions:
linux-restricted-modules-3.5.0-13-generic N/A
linux-backports-modules-3.5.0-13-generic N/A
linux-firmware 1.90
RfKill:
0: phy0: Wireless LAN
Soft blocked: no
Hard blocked: yes
Tags: quantal
Uname: Linux 3.5.0-13-generic i686
UpgradeStatus: No upgrade log present (probably fresh install)
UserGroups:
dmi.bios.date: /08/0520
dmi.bios.vendor: Insyde Software Corporation
dmi.bios.version: R1.01
dmi.board.asset.tag: 87654321
dmi.board.name: NEC Versa Premium
dmi.board.vendor: NEC COMPUTERS INTERNATIONAL
dmi.board.version: 5a
dmi.chassis.asset.tag: 12345678
dmi.chassis.type: 5
dmi.modalias: dmi:bvnInsydeSoftwareCorporation:bvrR1.01:bd/08/0520:svnPackardBellComputersInternational:pnPackardBellEasyNote:pvrPB42BD0291:rvnNECCOMPUTERSINTERNATIONAL:rnNECVersaPremium:rvr5a:cvn:ct5:cvrI:
dmi.product.name: Packard Bell EasyNote
dmi.product.version: PB42BD0291
dmi.sys.vendor: Packard Bell Computers International
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1043403/+subscriptions
More information about the foundations-bugs
mailing list