[Bug 771905] Re: (natty/nvidia) No logo at boot on nvidia card
Louis Bouchard
louis.bouchard at canonical.com
Mon Sep 26 07:55:14 UTC 2011
Hi Steve,
I have just tested with Oneiric Beta1 and I still don't have the Ubuntu
Logo when I boot. Still the same behavior after updating to the latest
packages. Here is my graphic adapter info :
01:00.0 VGA compatible controller: nVidia Corporation GT218 [NVS 3100M] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Hewlett-Packard Company Device 172b
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Region 1: Memory at c0000000 (64-bit, prefetchable) [size=256M]
Region 3: Memory at d0000000 (64-bit, prefetchable) [size=32M]
Region 5: I/O ports at 5000 [size=128]
[virtual] Expansion ROM at d3080000 [disabled] [size=512K]
Capabilities: [60] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
Address: 0000000000000000 Data: 0000
Capabilities: [78] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 5GT/s, Width x16, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM+ Surprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 128 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM+ AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
DevCap2: Completion Timeout: Not Supported, TimeoutDis+
DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-
LnkCtl2: Target Link Speed: 5GT/s, EnterCompliance- SpeedDis-, Selectable De-emphasis: -6dB
Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
Compliance De-emphasis: -6dB
LnkSta2: Current De-emphasis Level: -6dB
Capabilities: [b4] Vendor Specific Information: Len=14 <?>
Capabilities: [100 v1] Virtual Channel
Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
Arb: Fixed- WRR32- WRR64- WRR128-
Ctrl: ArbSelect=Fixed
Status: InProgress-
VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
Status: NegoPending- InProgress-
Capabilities: [128 v1] Power Budgeting <?>
Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
Kernel driver in use: nvidia
Kernel modules: nvidia-current, nouveau, nvidiafb
hope this helps,
...Louis (aka Caribou)
--
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to plymouth in Ubuntu.
https://bugs.launchpad.net/bugs/771905
Title:
(natty/nvidia) No logo at boot on nvidia card
Status in The Plymouth splash screen:
Confirmed
Status in “plymouth” package in Ubuntu:
Incomplete
Bug description:
Binary package hint: plymouth
Hello,
I have a Nvidia GeForce 8600M GS, with proprietary drivers, and I am using Ubuntu Natty.
Since I updated to Natty (it was the Beta 2 version), plymouth only
shows a purple screen, without logo and without dots. It's simply
purple.
Note that, before updating, I had already solved the issue which made plymouth show the Ubuntu logo textual theme instead of the graphic one with proprietary drivers on Nvidia cards, so I don't think it's related (unless some of the files I modified were reset during the update, I don't know). This time, however, I don't even get the "default" text theme.
---
Architecture: i386
DefaultPlymouth: /lib/plymouth/themes/ubuntu-logo/ubuntu-logo.plymouth
DistroRelease: Ubuntu 11.04
InstallationMedia: Ubuntu 10.04 LTS "Lucid Lynx" - Release i386 (20100429)
MachineType: Acer Aspire 5520
NonfreeKernelModules: nvidia
Package: plymouth 0.8.2-2ubuntu23
PackageArchitecture: i386
ProcEnviron:
LANGUAGE=it_IT:en
LANG=it_IT.UTF-8
SHELL=/bin/bash
ProcFB: 0 VESA VGA
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.38-11-generic root=UUID=fd612675-057c-4887-8c29-de0c54da7ec8 ro quiet splash nomodeset video=uvesafb:mode_option=1280x800-24,mtrr=3,scroll=ywrap vt.handoff=7
ProcVersionSignature: Ubuntu 2.6.38-11.50-generic 2.6.38.8
Tags: natty running-unity
TextPlymouth: /lib/plymouth/themes/ubuntu-text/ubuntu-text.plymouth
Uname: Linux 2.6.38-11-generic i686
UpgradeStatus: Upgraded to natty on 2011-04-21 (157 days ago)
UserGroups: adm admin cdrom dialout lpadmin plugdev sambashare
dmi.bios.date: 10/29/2007
dmi.bios.vendor: Acer
dmi.bios.version: V1.10
dmi.board.name: Fuquene
dmi.board.vendor: Acer
dmi.board.version: N/A
dmi.chassis.type: 10
dmi.chassis.vendor: Acer
dmi.chassis.version: N/A
dmi.modalias: dmi:bvnAcer:bvrV1.10:bd10/29/2007:svnAcer:pnAspire5520:pvrV1.10:rvnAcer:rnFuquene:rvrN/A:cvnAcer:ct10:cvrN/A:
dmi.product.name: Aspire 5520
dmi.product.version: V1.10
dmi.sys.vendor: Acer
To manage notifications about this bug go to:
https://bugs.launchpad.net/plymouth/+bug/771905/+subscriptions
More information about the foundations-bugs
mailing list