[Bug 820023] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 subprocessinstalled post-installation script returned error exit status 1

[Fendervr]

Hi Steve,
    below there is the result of what you asked.
Best regards and thanks

ccl at ccl-HP-Pavilion-dv6-Notebook-PC:~$ testparm -s --parameter-name='disable 
netbios'
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
Processing section "[homes]"
Processing section "[netlogon]"
Processing section "[profiles]"
Processing section "[printers]"
Processing section "[pdf-documents]"
Processing section "[pdf-printer]"
Loaded services file OK.
ERROR: both 'wins support = true' and 'wins server = <server list>' cannot 
be set in the smb.conf file. nmbd will abort with this setting.
WARNING: You have some share names that are longer than 12 characters.
These may not be accessible to some older clients.
(Eg. Windows9x, WindowsMe, and smbclient prior to Samba 3.0.)
No
ccl at ccl-HP-Pavilion-dv6-Notebook-PC:~$ echo $?
1

Claudio

----- Original Message ----- 
From: "Steve Langasek" <steve.langasek at canonical.com>
To: <cpelvr at tiscali.it>
Sent: Monday, August 08, 2011 11:24 PM
Subject: [Bug 820023] Re: package samba 2:3.5.8~dfsg-1ubuntu2.2 
subprocessinstalled post-installation script returned error exit status 1


Hi Claudio,

ccl at ccl-HP-Pavilion-dv6-Notebook-PC:~$ testparm -s --parameter-name='disable 
netbios' 2>/dev/null
No
ccl at ccl-HP-Pavilion-dv6-Notebook-PC:~$ echo $?
1


Please run the testparm command *without* the 2>/dev/null redirection. 
I.e., run:

$ testparm -s --parameter-name='disable netbios'

and paste the output.  It seems testparm is returning a parse error for
your smb.conf, so we need to see what that is.

** Changed in: samba (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are subscribed to the bug
report.
https://bugs.launchpad.net/bugs/820023

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2.2 subprocess installed post-
  installation script returned error exit status 1

Status in “samba” package in Ubuntu:
  Incomplete

Bug description:
  I could not connect to a Windows printer shared. I tra ti remove and
  reinstalli samba & smbfs with "sudo apt-get install samba smbfs".

  ProblemType: Package
  DistroRelease: Ubuntu 11.04
  Package: samba 2:3.5.8~dfsg-1ubuntu2.2
  ProcVersionSignature: Ubuntu 2.6.38-11.47-generic-pae 2.6.38.8
  Uname: Linux 2.6.38-11-generic-pae i686
  NonfreeKernelModules: nvidia wl
  Architecture: i386
  Date: Tue Aug  2 22:23:28 2011
  ErrorMessage: il sottoprocesso vecchio script di post-installation ha 
restituito lo stato di errore 1
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 
(20101007.1)
  RelatedPackageVersions:
   nautilus 1:2.32.2.1-0ubuntu13
   gvfs     1.8.0-0ubuntu2
  SambaClientRegression: Yes
  SourcePackage: samba
  Title: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: il 
sottoprocesso vecchio script di post-installation ha restituito lo stato di 
errore 1
  UpgradeStatus: Upgraded to natty on 2011-05-02 (92 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/820023/+subscriptions

-- 
You received this bug notification because you are a member of Ubuntu
Foundations Bugs, which is subscribed to samba in Ubuntu.
https://bugs.launchpad.net/bugs/820023

Title:
  package samba 2:3.5.8~dfsg-1ubuntu2.2 subprocess installed post-
  installation script returned error exit status 1

Status in “samba” package in Ubuntu:
  Incomplete

Bug description:
  I could not connect to a Windows printer shared. I tra ti remove and
  reinstalli samba & smbfs with "sudo apt-get install samba smbfs".

  ProblemType: Package
  DistroRelease: Ubuntu 11.04
  Package: samba 2:3.5.8~dfsg-1ubuntu2.2
  ProcVersionSignature: Ubuntu 2.6.38-11.47-generic-pae 2.6.38.8
  Uname: Linux 2.6.38-11-generic-pae i686
  NonfreeKernelModules: nvidia wl
  Architecture: i386
  Date: Tue Aug  2 22:23:28 2011
  ErrorMessage: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1
  InstallationMedia: Ubuntu 10.10 "Maverick Meerkat" - Release i386 (20101007.1)
  RelatedPackageVersions:
   nautilus 1:2.32.2.1-0ubuntu13
   gvfs     1.8.0-0ubuntu2
  SambaClientRegression: Yes
  SourcePackage: samba
  Title: package samba 2:3.5.8~dfsg-1ubuntu2.2 failed to install/upgrade: il sottoprocesso vecchio script di post-installation ha restituito lo stato di errore 1
  UpgradeStatus: Upgraded to natty on 2011-05-02 (92 days ago)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/samba/+bug/820023/+subscriptions