[ubuntu/eoan-proposed] linux-raspi2 5.3.0-1011.12 (Accepted)

Andy Whitcroft apw at canonical.com
Fri Nov 1 13:38:54 UTC 2019


linux-raspi2 (5.3.0-1011.12) eoan; urgency=medium

  * eoan/linux-raspi2: 5.3.0-1011.12 -proposed tracker (LP: #1850896)

  * CONFIG_KVM is disabled for linux-raspi2 (aarch64 and armhf) (LP: #1783961)
    - raspi2: [Config] CONFIG_KVM='y'

  * linux-raspi2: rebase the Eoan kernel to the latest rpi-5.3.y branch
    (2a085c9b42ea) (LP: #1849623)
    - drm/v3d: HACK: gut runtime pm for now.
    - drm/v3d: Clock V3D down when not in use.
    - According to 5713 pdf doc CLOCK_CTRL is a readonly status register, and it
      behaves so. Remove useless setting
    - ARM: dts: bcm2835-common: Restore V3D power domain
    - staging: bcm2835_camera: Ensure all buffers are returned on disable
    - Ported pcie-brcmstb bounce buffer implementation to ARM64. (#3144)
    - Add missing dma_unmap_sg calls to free relevant swiotlb bounce buffers. This
      prevents DMA leaks.
    - drm/vc4: Query firmware for custom HDMI mode
    - drm/vc4: Pass the drm vrefresh to the firmware on mode set
    - overlays: audremap: Support GPIOs 18 & 19
    - drm/vc4: Add support for margins to fkms
    - drm/vc4: Ensure zpos is always initialised
    - dts: bcm2838: add missing properties for pmu and gic nodes
    - adds the Hifiberry DAC+ADC PRO version
    - codecs: Correct Katana minimum volume
    - drm/vc4: A present but empty dmas disables audio
    - overlays: Add audio parameter to vc4-kms-v3d
    - overlays: Update the upstream overlay
    - Fixup FKMS interrupt handing for non-existent display
    - drivers: char: add chardev for mmap'ing the RPiVid control registers
    - hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
    - drm/vc4: Add "Broadcast RGB" connector property
    - drm/vc4: fkms: Set default state margin at reset
    - configs: Add CONFIG_FRAMEBUFFER_CONSOLE_ROTATION to Pi configs
    - staging: bcm2835-codec: switch to multi-planar API
    - staging: bcm2835-codec: implement V4L2_CID_MIN_BUFFERS_FOR_CAPTURE
    - staging: bcm2835-codec: set device_caps in struct video_device
    - Add HDMI1 facility to the driver.
    - overlays: Add baudrate parameter to i2c3-i2c6
    - drm/vc4: Resolve the vblank warnings on mode switching
    - drm/vc4: Remove unused mode variable
    - staging:bcm2835-codec: Expand logging on format setting
    - staging: bcm2835-codec: Correct bytesperline on format changed
    - drm/vc4: Add missing NULL check to vc4_crtc_consume_event
    - net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
    - configs: Regenerate the defconfigs
    - configs: Enable building the DS28E17 driver module
    - ARM: dts: bcm2711-rpi-4-b: I2C aliases and pulls
    - xhci: Use more event ring segment table entries
    - dwc_otg: use align_buf for small IN control transfers (#3150)
    - configs: arm64/bcm2711: Enable V3D
    - overlays: sc16ic752-i2c: Fix xtal parameter
    - vc-sm-cma: Fix compatibility ioctl
    - configs: Add TINYDRM modules
    - staging: bcm2835-codec: add support for V4L2_CID_MPEG_VIDEO_FORCE_KEY_FRAME
    - staging: bcm2835-codec: remove unnecessary padding on encoder input
    - arm: dts: add missing Raspberry Pi model names
    - configs: Add support for the Audio Injector Ultra in 64-bit land.
    - arch/arm: Add model string to cpuinfo
    - arch/arm64: Add Revision, Serial, Model to cpuinfo
    - media: dt-bindings: Add binding for the Sony IMX219 sensor
    - media: i2c: Add driver for Sony IMX219 sensor
    - defconfigs: Add Sony IMX219 driver to RPi defconfigs
    - dtoverlays: Add overlay for the Sony IMX219 image sensor.
    - staging: bcm2835-codec: Fix non-documentation comment block
    - staging: bcm2835-codec: Fix declaration of roles
    - staging: bcm2835-codec: Add role to device name
    - staging: bcm2835-codec: Pass driver context to create entities
    - staging: bcm2835-codec: add media controller support
    - media: bcm2835: unicam: Reduce scope of local function
    - media: bcm2835: unicam: add media controller support
    - Limit max_req_size under arm64 (or any other platform that uses swiotlb) to
      prevent potential buffer overflow due to bouncing.
    - overlays: mcp23017: rename the GPIO pins node with the device
    - overlays: mcp23017: Add option for not connecting the int GPIO
    - v4l2: Add a Greyworld AWB mode.
    - staging: bcm2835-camera: Add greyworld AWB mode
    - configs: Add GPIO_PCA953X, LEDS_PCA9532/PCA955X
    - configs: Set VIDEO_V4L2_SUBDEV_API=y on arm64/bcm2711
    - arm/dts: Give v3dbus a 16GB DMA address range
    - drm/vc4: Fix for margins in composite/SDTV mode (#3223)
    - Add Hifiberry DAC+DSP soundcard driver (#3224)
    - staging: bcm2835-codec: Allow height of 1920.
    - staging: bcm2835-codec: Correct g/s_selection API MPLANE support
    - drm/v3d: Delete pm_runtime support
    - configs: Regenerate defconfigs
    - configs: Update arm64/bcm2711_defconfig based on the arm version (#3239)
    - dts: Add DTS for Pi 2B rev 1.2 with BCM2837 (#3235)
    - drm/v3d: clean caches at the end of render jobs on request from user space
    - kbuild: Allow .dtbo overlays to be built piecemeal
    - dma-direct: Temporary DMA fix on arm64
    - configs: Enable CONFIG_NET_VRF=m
    - configs: Update bcm2711 arm64 USB options to match arm (#3254)
    - bcm2708_fb: Fix layout of struct vc4_display_settings_t
    - ARM: dts: bcm27xx: Fix DTC warning for memory node
    - ARM: dts: bcm2708-rpi: Define the downstream MMC interfaces at one place
    - ARM: dts: bcm283x: Define MMC interfaces at board level
    - ARM: dts: bcm2835-rpi-zero-w: Fix bus-width of sdhci
    - ARM: dts: bcm2708-rpi: Define the downstream HDMI power at one place
    - ARM: dts: bcm283x: Enable HDMI at board level
    - Revert "HACK: clk-bcm2835: Add BCM2838_CLOCK_EMMC2 support"
    - clk: bcm2835: Introduce SoC specific clock registration
    - clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support
    - ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
    - Revert "pinctrl-bcm2835: Add support for BCM2838"
    - pinctrl: bcm2835: Add support for BCM2711 pull-up functionality
    - bcm2708-dmaengine: don't leak kernel address
    - dwc_otg: don't leak kernel address
    - bcm2835_smi: suppress warnings
    - bcm2835-dma: suppress warning
    - raspberrypi_axi_monitor: suppress warning
    - vchiq_2835_arm: suppress warning
    - Rename HDMI ALSA device names, check for enable state
    - pcie-brcmstb-bounce64.c: dev_err() -> dev_info() for info messages
    - overlays: gpio-shutdown: Add debounce parameter
    - overlays: fix compatible for RPi4
    - [Config] update 3 configs

Date: 2019-11-01 09:03:14.710705+00:00
Changed-By: Kleber Sacilotto de Souza <kleber.souza at canonical.com>
Signed-By: Andy Whitcroft <apw at canonical.com>
https://launchpad.net/ubuntu/+source/linux-raspi2/5.3.0-1011.12
-------------- next part --------------
Sorry, changesfile not available.


More information about the Eoan-changes mailing list